aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-12ARM: dts: ixp4xx: Add crypto engineLinus Walleij1-0/+8
Add the crypto engine as a child of the NPE. Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'amlogic-arm64-dt-for-v5.14' of ↵Olof Johansson9-4/+711
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM64 DT changed for v5.14: - set 128bytes FIFO size on uart A - add Banana PI BPI-M5 board dts & bindings - meson-sm1: add toacodec node to use internal audio DAC - enable hdmi audio loopback on VIM3 board * tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: set 128bytes FIFO size on uart A arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts dt-bindings: arm: amlogic: add Banana PI M5 bindings arm64: dts: meson-sm1: add toacodec node arm64: dts: meson: vim3: enable hdmi audio loopback Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'omap-for-v5.14/dt-signed' of ↵Olof Johansson33-181/+139
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.14 merge window Mostly just clean-up for device tree binding checks with few other clean-up patches: - Drop ov5640 sensor for dra76-evm, it's just one of the optional additional sensors and makes hard to use any of the other options, TI is using the devicetree overlay snippets for these - Group the phandles in osd3358-sm-red to make the files more readable - A series of gpio clean-up patches to follow the binding documentation - Move ti,no-reset related properties to the target module level, the ti-sysc driver handles them also in the child but they really belong to the target module - Drop the unnecessary uart compatible entries to make the binding check to work - Mailbox related updates to make the binding check to work * tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes ARM: dts: OMAP2420: Drop interrupt-names from mailbox node ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema ARM: dts: omap5-board-common: align gpio hog names with dt-schema ARM: dts: omap3: align gpio hog names with dt-schema ARM: dts: am437x: align gpio hog names with dt-schema ARM: dts: am335x: align GPIO hog names with dt-schema ARM: dts: osd3358-sm-red: group in the same phandle all its properties ARM: dts: dra76-evm: remove ov5640 Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3 Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'renesas-arm-dt-for-v5.14-tag1' of ↵Olof Johansson34-25/+146
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 - GPIO extender support for the Falcon development board, - Switches support for the ALT development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: alt: Add SW2 as GPIO keys ARM: dts: renesas: Move enable-method to CPU nodes arm64: dts: renesas: beacon: Fix USB ref clock references arm64: dts: renesas: beacon: Fix USB extal reference ARM: dts: rcar-gen1: Correct internal delay for i2c[123] arm64: dts: renesas: eagle: Add x1 clock ARM: dts: koelsch: Rename sw2 to keyboard ARM: dts: r8a7779, marzen: Fix DU clock names arm64: dts: renesas: v3msk: Fix memory size arm64: dts: renesas: condor: Switch eMMC bus to 1V8 arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders arm64: dts: renesas: beacon kit: Setup AVB refclk arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'gemini-dts-v5.14-1' of ↵Olof Johansson10-33/+20
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini device tree updates for the v5.14 kernel: - MAINTAINERS fix for the DTS files - Drop a duplicate ethernet node on the RUT1xx DTS - Add device_type to the PCI node - Fix up some DTS syntax so it agrees with the schemas merged for the v5.14 merge window * tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: remove xxx-cells from display ARM: dts: gemini-dlink-dir-685: Remove address from display port ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c ARM: dts: gemini: convert obsolete SPI properties ARM: dts: gemini: use the right rtc compatible ARM: dts: gemini: add device_type on pci ARM: dts: gemini-rut1xx: remove duplicate ethernet node ARM: dts: gemini: rename mdio to the right name MAINTAINERS: gemini: add missing dts pattern Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'ixp4xx-dts-v5.14-1' of ↵Olof Johansson6-28/+280
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS updates for the v5.14 kernel: - Add ethernet to the boards - Add PCI hosts to the boards - Create an expansion bus around the flash memory - Add the beeper to NSLU2 completing the NSLU2 DTS * tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix up the IXP4xx ethernet nodes ARM: dts: ixp4xx: Add beeper to the NSLU2 ARM: dts: ixp4xx: Create a proper expansion bus ARM: dts: ixp4xx: Add PCI hosts ARM: dts: ixp4xx: Add ethernet Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: dts: add intel-ixp42x-welltech-epbx100Corentin Labbe2-0/+77
This patch adds devicetree for intel-ixp42x-welltech-epbx100. Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12dt-bindings: arm: intel-ixp4xx: add welltech,epbx100Corentin Labbe1-0/+1
Adds welltech,epbx100 as a valid intel-ixp4xx board. Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12dt-bindings: add vendor prefix for welltechCorentin Labbe1-0/+2
Add vendor prefix for Welltech computer Co Ld. Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-01arm64: dts: meson: set 128bytes FIFO size on uart ANeil Armstrong3-0/+3
The first UART controller in "Everything-Else" power domain, usually used for Bluetooth HCI has 128bytes FIFO depth. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210518075833.3736038-4-narmstrong@baylibre.com
2021-05-28arm64: dts: meson-sm1: add Banana PI BPI-M5 board dtsNeil Armstrong2-0/+647
Banana Pi BPI-M5 is a credit card format SBC with the following features: - Amlogic S905X3 quad core Cortex-A55 - Mali-G31 GPU - 4GB LPDDR4 - 16GB eMMC flash - 4 USB 3.0 - 1 GbE ethernet - HDMI output - 2x LEDS - SDCard - 2.5mm Jack with Stereo Audio + CVBS - Infrared Received - ADC Button - GPIO Button - 40 pins header + 3pins debug header Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210514143255.3352774-4-narmstrong@baylibre.com
2021-05-28dt-bindings: arm: amlogic: add Banana PI M5 bindingsNeil Armstrong1-0/+1
Add bindings for the Banana PI M5 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210514143255.3352774-3-narmstrong@baylibre.com
2021-05-28arm64: dts: meson-sm1: add toacodec nodeNeil Armstrong1-0/+10
Add toacodec node for Amlogic SM1 SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210514143255.3352774-2-narmstrong@baylibre.com
2021-05-28arm64: dts: meson: vim3: enable hdmi audio loopbackJerome Brunet2-4/+50
Enable audio capture frontends and a tdm decoder. This makes it possible to loopback the audio played on the hdmi codec, which is the only output interface at the moment. Of course, one TODDR device would be enough to do that but since the 3 FRDDRs are enabled on the playback side, let's do the same on the capture side. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210429084253.59692-1-jbrunet@baylibre.com
2021-05-27ARM: dts: alt: Add SW2 as GPIO keysWolfram Sang1-0/+42
SW2 on Alt is connected as on Lager board. So, use the same GPIO settings. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210525091512.29119-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-27ARM: dts: OMAP2+: Replace underscores in sub-mailbox node namesSuman Anna8-20/+20
A number of sub-mailbox node names in various OMAP2+ dts files are currently using underscores. This is not adhering to the node name convention, fix all of these to use hiphens. These nodes are already using the prefix mbox, so they will be in compliance with the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding as well. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox nodeSuman Anna2-2/+2
The OMAP sub-mailbox used to communicate with the Wakeup M3 remote processor is currently named wkup_m3. This name can be confused with the remote processor node. So, rename this to mbox-wkup-m3 to remove the ambiguity and to also adhere to the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodesSuman Anna3-4/+4
The OMAP sub-mailbox used to communicate with the DSP and IVA remote processors are currently named after the processor name. These can be confused with the remote processors themselves. Rename them to remove the ambiguity and use the prefix mbox to also adhere to the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: OMAP2420: Drop interrupt-names from mailbox nodeSuman Anna1-1/+0
The interrupt-names property is neither defined nor used in either of the OMAP Mailbox binding or the driver. So, drop them. This is in preparation for converting the OMAP Mailbox binding to YAML format. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodesVignesh Raghavendra1-6/+6
ti,omap2-uart was kept around to work with legacy omap-serial driver. Now that we have completed move to 8250-omap.c drop legacy compatible. This will simplify writing YAML schema. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodesVignesh Raghavendra1-10/+10
ti,omap4-uart was kept around to work with legacy omap-serial driver. Now that we have completed move to 8250-omap.c drop legacy compatible. This will simplify writing YAML schema. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: am335x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko5-6/+6
The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-2/+5
The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-5/+4
The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: dra7x-evm: Align GPIO hog names with dt-schemaGeert Uytterhoeven4-4/+4
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: omap5-board-common: align gpio hog names with dt-schemaGrygorii Strashko1-1/+1
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: omap3: align gpio hog names with dt-schemaGrygorii Strashko2-2/+2
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: am437x: align gpio hog names with dt-schemaGrygorii Strashko2-3/+3
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-27ARM: dts: am335x: align GPIO hog names with dt-schemaGrygorii Strashko5-10/+10
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-25ARM: dts: renesas: Move enable-method to CPU nodesGeert Uytterhoeven10-10/+28
According to Documentation/devicetree/bindings/arm/cpus.yaml, the "enable-method" property should be a property of the individual CPU nodes, and not of the parent "cpus" container node. However, on R-Car Gen2 and RZ/G1 SoCs, the property is tied to the "cpus" node instead. Secondary CPU bringup and CPU hot (un)plug work regardless, as arm_dt_init_cpu_maps() falls back to looking in the "cpus" node. The cpuidle code does not have such a fallback, so it does not detect the enable-method. Note that cpuidle does not support the "renesas,apmu" enable-method yet, so for now this does not make any difference. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/35fcfedf9de9269185c48ca5a6dfcba7cdd3484b.1621427319.git.geert+renesas@glider.be
2021-05-25arm64: dts: renesas: beacon: Fix USB ref clock referencesAdam Ford1-2/+2
The RZ/G2 boards expect there to be an external clock reference for USB2 EHCI controllers. For the Beacon boards, this reference clock is controlled by a programmable versaclock. Because the RZ/G2 family has a special clock driver when using an external clock, the third clock reference in the EHCI node needs to point to this special clock, called usb2_clksel. Since the usb2_clksel does not keep the usb_extal clock enabled, the 4th clock entry for the EHCI nodes needs to reference it to keep the clock running and make USB functional. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-25arm64: dts: renesas: beacon: Fix USB extal referenceAdam Ford1-2/+4
The USB extal clock reference isn't associated to a crystal, it's associated to a programmable clock, so remove the extal reference, add the usb2_clksel. Since usb_extal is referenced by the versaclock, reference it here so the usb2_clksel can get the proper clock speed of 50MHz. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-25ARM: dts: rcar-gen1: Correct internal delay for i2c[123]Geert Uytterhoeven2-0/+6
According to the R-Car M1A and H1 Hardware User's Manuals Rev. 1.00, the LSI internal delay for I2C instances 1 to 3 is 5 ns (typ.), which differs from the default 50 ns as specified for instance 0. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1eac63f15a776e492ff8a2d8447c5e1019982dd1.1620138979.git.geert+renesas@glider.be Link: https://lore.kernel.org/r/73c96fd455df82ef04fd1db6d7dd79b4679f6c56.1620138979.git.geert+renesas@glider.be
2021-05-25arm64: dts: renesas: eagle: Add x1 clockValentine Barshak1-0/+8
This adds X1 clock which supplies a frequency of 148.5 MHz. This clock is connected to the external dot clock input signal. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> [geert: Verified schematics] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/75a66bae21937da1c69e8024ce61b35aad4ac9b8.1620119570.git.geert+renesas@glider.be
2021-05-25ARM: dts: koelsch: Rename sw2 to keyboardGeert Uytterhoeven1-2/+2
Rename "sw2_pins" and "sw2" to "keyboard_pins" resp. "keyboard", to comply with generic name recommendations. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/3d718cf69e21b1ceea0c29c0e841b9bdda44533d.1619785905.git.geert+renesas@glider.be
2021-05-25ARM: dts: r8a7779, marzen: Fix DU clock namesGeert Uytterhoeven2-1/+2
"make dtbs_check" complains: arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected Change the first clock name to match the DT bindings. This has no effect on actual operation, as the Display Unit driver in Linux does not use the first clock name on R-Car H1, but just grabs the first clock. Fixes: 665d79aa47cb3983 ("ARM: shmobile: marzen: Add DU external pixel clock to DT") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/9d5e1b371121883b3b3e10a3df43802a29c6a9da.1619699965.git.geert+renesas@glider.be
2021-05-25arm64: dts: renesas: v3msk: Fix memory sizeValentine Barshak1-1/+1
The V3MSK board has 2 GiB RAM according to the datasheet and schematics. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> [geert: Verified schematics] Fixes: cc3e267e9bb0ce7f ("arm64: dts: renesas: initial V3MSK board device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210326121050.1578460-1-geert+renesas@glider.be
2021-05-25arm64: dts: renesas: condor: Switch eMMC bus to 1V8Wolfram Sang1-7/+1
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND array and the VCCQ supplies the bus. On Condor, the VCC is connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux to match the bus, which is always operating in 1.8V mode. While at it, deduplicate the pinmux entries, which are now the same for both default and UHS modes. We still need the two pinctrl entries to match the bindings though. Thanks to Marek Vasut for this description from commit 5f65328df3f5cd25 ("arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB"). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210419143858.39401-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-25arm64: dts: renesas: falcon-csi-dsi: Add GPIO extendersNiklas Söderlund1-0/+21
We need to configure their GPIOs to power on the MAX96712s. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210413181447.2588084-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-25arm64: dts: renesas: beacon kit: Setup AVB refclkAdam Ford1-0/+2
The AVB reference clock assumes an external clock that runs automatically. Because the Versaclock is wired to provide the AVB refclock, the device tree needs to reference it in order for the driver to start the clock. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210224115146.9131-5-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-25arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names listAdam Ford13-0/+18
The bindings have been updated to support two clocks. Add a clock-names list in the device tree with fck in it. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224115146.9131-3-aford173@gmail.com [geert: Update new r8a779a0.dtsi] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-25ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names listAdam Ford9-0/+9
The bindings have been updated to support two clocks. Add a clock-names list in the device tree with fck in it. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224115146.9131-2-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-23Linux 5.13-rc3Linus Torvalds1-1/+1
2021-05-23Merge tag 'perf-urgent-2021-05-23' of ↵Linus Torvalds4-9/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Two perf fixes: - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as this can cause malfunction when TOS is not supported - Allocate the LBR XSAVE buffers along with the DS buffers upfront because allocating them when adding an event can deadlock" * tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
2021-05-23Merge tag 'locking-urgent-2021-05-23' of ↵Linus Torvalds5-13/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two locking fixes: - Invoke the lockdep tracepoints in the correct place so the ordering is correct again - Don't leave the mutex WAITER bit stale when the last waiter is dropping out early due to a signal as that forces all subsequent lock operations needlessly into the slowpath until it's cleaned up again" * tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal locking/lockdep: Correct calling tracepoints
2021-05-23Merge tag 'irq-urgent-2021-05-23' of ↵Linus Torvalds5-11/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A few fixes for irqchip drivers: - Allocate interrupt descriptors correctly on Mainstone PXA when SPARSE_IRQ is enabled; otherwise the interrupt association fails - Make the APPLE AIC chip driver depend on APPLE - Remove redundant error output on devm_ioremap_resource() failure" * tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Remove redundant error printing irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
2021-05-23Merge tag 'x86_urgent_for_v5.13_rc3' of ↵Linus Torvalds3-57/+92
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix how SEV handles MMIO accesses by forwarding potential page faults instead of killing the machine and by using the accessors with the exact functionality needed when accessing memory. - Fix a confusion with Clang LTO compiler switches passed to the it - Handle the case gracefully when VMGEXIT has been executed in userspace * tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use __put_user()/__get_user() for data accesses x86/sev-es: Forward page-faults which happen during emulation x86/sev-es: Don't return NULL from sev_es_get_ghcb() x86/build: Fix location of '-plugin-opt=' flags x86/sev-es: Invalidate the GHCB after completing VMGEXIT x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
2021-05-23Merge tag 'powerpc-5.13-4' of ↵Linus Torvalds5-46/+82
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix breakage of strace (and other ptracers etc.) when using the new scv ABI (Power9 or later with glibc >= 2.33). - Fix early_ioremap() on 64-bit, which broke booting on some machines. Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and Christophe Leroy. * tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls powerpc: Fix early setup to make early_ioremap() work
2021-05-22Merge tag 'kbuild-fixes-v5.13' of ↵Linus Torvalds4-28/+32
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix short log indentation for tools builds - Fix dummy-tools to adjust to the latest stackprotector check * tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: dummy-tools: adjust to stricter stackprotector check scripts/jobserver-exec: Fix a typo ("envirnoment") tools build: Fix quiet cmd indentation
2021-05-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds18-75/+74
Merge misc fixes from Andrew Morton: "10 patches. Subsystems affected by this patch series: mm (pagealloc, gup, kasan, and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: userfaultfd: hugetlbfs: fix new flag usage in error path lib: kunit: suppress a compilation warning of frame size proc: remove Alexey from MAINTAINERS linux/bits.h: fix compilation error with GENMASK watchdog: reliable handling of timestamps kasan: slab: always reset the tag in get_freepointer_safe() tools/testing/selftests/exec: fix link error ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry Revert "mm/gup: check page posion status for coredump." mm/shuffle: fix section mismatch warning
Powered by cgit, Gruvboxed by Blaster4385.