Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for v5.14 merge window

Mostly just clean-up for device tree binding checks with
few other clean-up patches:

- Drop ov5640 sensor for dra76-evm, it's just one of the
  optional additional sensors and makes hard to use any of
  the other options, TI is using the devicetree overlay
  snippets for these

- Group the phandles in osd3358-sm-red to make the files
  more readable

- A series of gpio clean-up patches to follow the binding
  documentation

- Move ti,no-reset related properties to the target module
  level, the ti-sysc driver handles them also in the child
  but they really belong to the target module

- Drop the unnecessary uart compatible entries to make the
  binding check to work

- Mailbox related updates to make the binding check to
  work

* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
  ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
  ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
  ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
  ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
  ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
  ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
  ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  ARM: dts: omap3: align gpio hog names with dt-schema
  ARM: dts: am437x: align gpio hog names with dt-schema
  ARM: dts: am335x: align GPIO hog names with dt-schema
  ARM: dts: osd3358-sm-red: group in the same phandle all its properties
  ARM: dts: dra76-evm: remove ov5640

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>

33 files changed, 139 insertions, 181 deletions

diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 3ea286180382..1103a2cb836f 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -393,10 +393,10 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
-&gpio3 {
+&gpio3_target {
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 86cad9912906..80116646a3fe 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -101,7 +101,7 @@
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 69acaf4ea0f3..0afcc2ee0b63 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -436,7 +436,7 @@
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 7615327d906a..74db0fc39397 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -101,7 +101,7 @@
 };
 
 &gpio1 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -118,7 +118,7 @@
 /* an external pulldown on U21 pin 4.                                  */
 
 &gpio3 {
-	bt_aud_in {
+	bt-aud-in-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index d5f8d5e2eb5d..45bf0273ecd8 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -646,7 +646,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index e923d065304d..5e598ac96dcc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -458,14 +458,14 @@
 };
 
 &gpio3 {
-	p4 {
+	pr1-mii-ctl-hog {
 		gpio-hog;
 		gpios = <4 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PR1_MII_CTRL";
 	};
 
-	p10 {
+	mux-mii-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 4e90f9c23d2e..8121a199607c 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -150,7 +150,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 98d8ed4ad967..39e5d2ce600a 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -353,7 +353,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index f841afb27844..5403e47c07e2 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -25,10 +25,6 @@
 	regulator-always-on;
 };
 
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
 &mmc2 {
 	vmmc-supply = <&vmmcsd_fixed>;
 	pinctrl-names = "default";
@@ -37,68 +33,6 @@
 	status = "okay";
 };
 
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-
-	mcasp0_pins: mcasp0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-
-	flash_enable: flash-enable {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) 	/* rmii1_ref_clk.gpio0_29 */
-		>;
-	};
-
-	imu_interrupt: imu-interrupt {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) 		/* mii1_rx_er.gpio3_2 */
-		>;
-	};
-
-	ethernet_interrupt: ethernet-interrupt{
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) 		/* mii1_col.gpio3_0 */
-		>;
-	};
-};
-
 &lcdc {
 	status = "okay";
 
@@ -167,10 +101,6 @@
 	};
 };
 
-&rtc {
-	system-power-controller;
-};
-
 &mcasp0 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -267,6 +197,66 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&clkout2_pin>;
 
+	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+
+	flash_enable: flash-enable {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* rmii1_ref_clk.gpio0_29 */
+		>;
+	};
+
+	imu_interrupt: imu-interrupt {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_rx_er.gpio3_2 */
+		>;
+	};
+
+	ethernet_interrupt: ethernet-interrupt{
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 */
+		>;
+	};
+
 	user_leds_s0: user-leds-s0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
@@ -427,6 +417,7 @@
 
 &mmc1 {
 	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <0x4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
@@ -434,6 +425,7 @@
 };
 
 &rtc {
+	system-power-controller;
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
 };
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 1eaa26533466..2bfe60d32783 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -140,14 +140,14 @@
 };
 
 &gpio1 {
-	hmtc_rst {
+	hmtc-rst-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "homematic_reset";
 	};
 
-	hmtc_prog {
+	hmtc-prog-hog {
 		gpio-hog;
 		gpios = <27 GPIO_ACTIVE_LOW>;
 		output-high;
@@ -156,14 +156,14 @@
 };
 
 &gpio3 {
-	zgb_rst {
+	zgb-rst-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "zigbee_reset";
 	};
 
-	zgb_boot {
+	zgb-boot-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 039a9ab4c7ea..268793bd88cb 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1486,7 +1486,7 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <4>;
 				ti,mbox-num-fifos = <8>;
-				mbox_wkupm3: wkup_m3 {
+				mbox_wkupm3: mbox-wkup-m3 {
 					ti,mbox-send-noirq;
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <0 0 3>;
@@ -1789,7 +1789,7 @@
 			};
 		};
 
-		target-module@ae000 {			/* 0x481ae000, ap 56 3a.0 */
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0xae000 0x4>,
 			      <0xae010 0x4>,
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 6e4d05d649e9..e2677682b540 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -786,7 +786,7 @@
 	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
 
-	p23 {
+	sel-emmc-nand-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		/* SelEMMCorNAND selects between eMMC and NAND:
@@ -813,13 +813,16 @@
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
-	p8 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index e217ffc09770..204d3d42b09f 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -194,7 +194,7 @@
 			ranges = <0x0 0x9000 0x1000>;
 
 			uart0: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -712,7 +712,7 @@
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -740,7 +740,7 @@
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1168,7 +1168,7 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <4>;
 				ti,mbox-num-fifos = <8>;
-				mbox_wkupm3: wkup_m3 {
+				mbox_wkupm3: mbox-wkup-m3 {
 					ti,mbox-send-noirq;
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <0 0 3>;
@@ -1399,7 +1399,7 @@
 			ranges = <0x0 0xa6000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1427,7 +1427,7 @@
 			ranges = <0x0 0xa8000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1455,7 +1455,7 @@
 			ranges = <0x0 0xaa000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -2070,7 +2070,7 @@
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>,
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index f517d1e843cf..d717d5ada812 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -725,7 +725,7 @@
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 
-	p1 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 0d5fe2bfb683..aed81568a297 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -454,20 +454,20 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
@@ -610,12 +610,11 @@
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3551a64963f8..1825d912b8ab 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -351,7 +351,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 38530dbb89a0..3dcb6e1f49bc 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -366,7 +366,7 @@
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
index a25749a1c365..a5bdc6431d8d 100644
--- a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -5,17 +5,17 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 149144cdff35..4b336b831da2 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1159,7 +1159,7 @@
 			ranges = <0x0 0x20000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1343,7 +1343,7 @@
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1376,7 +1376,7 @@
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
@@ -1562,7 +1562,7 @@
 			ranges = <0x0 0x66000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1594,7 +1594,7 @@
 			ranges = <0x0 0x68000 0x1000>;
 
 			uart6: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1626,7 +1626,7 @@
 			ranges = <0x0 0x6a000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1658,7 +1658,7 @@
 			ranges = <0x0 0x6c000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1690,7 +1690,7 @@
 			ranges = <0x0 0x6e000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2424,7 +2424,7 @@
 			ranges = <0x0 0x20000 0x1000>;
 
 			uart7: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2454,7 +2454,7 @@
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart8: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2484,7 +2484,7 @@
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart9: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -4530,7 +4530,7 @@
 			ranges = <0x0 0xb000 0x1000>;
 
 			uart10: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 6d2cca6b4488..a64364443031 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -187,7 +187,7 @@
 };
 
 &pcf_hdmi {
-	p0 {
+	hdmi-i2c-disable-hog {
 		/*
 		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
 		 * With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index b65b2dd094d0..f2384277d5dc 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -268,7 +268,7 @@
 		 */
 		lines-initial-states = <0x0f2b>;
 
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index d403acc754b6..85ab1f46e56b 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -77,12 +77,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -90,7 +90,7 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
index b1147a4b77f9..3256631510c5 100644
--- a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -6,7 +6,7 @@
 #include "dra7-ipu-dsp-common.dtsi"
 
 &mailbox6 {
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index e1850d6c841a..411ad295c201 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -188,12 +188,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -201,12 +201,12 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae40b1d..fbe4030650b7 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -158,12 +158,6 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
-	clk_ov5640_fixed: clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -381,7 +375,7 @@
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -406,27 +400,6 @@
 	};
 };
 
-&i2c5 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-
-		clocks = <&clk_ov5640_fixed>;
-		clock-names = "xclk";
-
-		port {
-			csi2_cam0: endpoint {
-				remote-endpoint = <&csi2_phy0>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
 &cpu0 {
 	vdd-supply = <&buck10_reg>;
 };
@@ -573,14 +546,6 @@
 	};
 };
 
-&csi2_0 {
-	csi2_phy0: endpoint {
-		remote-endpoint = <&csi2_cam0>;
-		clock-lanes = <0>;
-		data-lanes = <1 2>;
-	};
-};
-
 &ipu2 {
 	status = "okay";
 	memory-region = <&ipu2_cma_pool>;
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 494bf6972005..bb529a2a295d 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -192,16 +192,15 @@
 			compatible = "ti,omap2-mailbox";
 			reg = <0x48094000 0x200>;
 			interrupts = <26>, <34>;
-			interrupt-names = "dsp", "iva";
 			ti,hwmods = "mailbox";
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <6>;
-			mbox_dsp: dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <1 0 0>;
 			};
-			mbox_iva: iva {
+			mbox_iva: mbox-iva {
 				ti,mbox-tx = <2 1 3>;
 				ti,mbox-rx = <3 1 3>;
 			};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index d19d8ba3b607..23115ba61bc0 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -284,7 +284,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <6>;
-			mbox_dsp: dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <1 0 0>;
 			};
diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index b4109f48ec18..e6ba30a21166 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -195,7 +195,7 @@
  * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
  */
 &gpio2 {
-	en_usb2_port {
+	en-usb2-port-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
 		output-low;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index fd84bbf3b9cc..9ce8d81250aa 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -37,7 +37,7 @@
 };
 
 &gpio5 {
-	irda_en {
+	irda-en-hog {
 		gpio-hog;
 		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
 		output-high;	/* activate gpio_175 to disable IrDA receiver */
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index c5b9da0d7e6c..574bda7a4afd 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -440,7 +440,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <2>;
 			ti,mbox-num-fifos = <2>;
-			mbox_dsp: dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <1 0 0>;
 			};
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 99721673d7af..46b8f9efd413 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -600,11 +600,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index d8f13626cfd1..45435bb88c89 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -149,7 +149,7 @@
 
 &gpio8 {
 	/* TI trees use GPIO instead of msecure, see also muxing */
-	p234 {
+	msecure-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index b148b289e830..06cc3a19ddaa 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -616,11 +616,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};