aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-06-16arm64: dts: ls1043a: Change I2C clock name to ipg to fix DTB_CHECK warningFrank Li1-4/+4
dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c" to fix below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: i2c@2190000: clock-names:0: 'ipg' was expecte Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-16arm64: dts: ls1012a: Reorder sai dma-names to clean up DTB_CHECK warningFrank Li1-6/+6
Change order of sai's dma-names to clearn up below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b50000: dma-names:1: 'tx' was expected arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b60000: dma-names:1: 'tx' was expected Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-16arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' propertyFabio Estevam1-1/+0
The usdhc2 port is connected to the microSD slot. The presence of the 'no-sdio' property prevents Wifi SDIO cards, such as CMP9010-X-EVB [1] to be detected. Remove the 'no-sdio' property so that SDIO cards could also work. [1] https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/cmp9010-x-evb-iw416-usd-interface-evaluation-board:CMP9010-X-EVB Fixes: e37907bd8294 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support") Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-16arm64: dts: imx8mp: Add imx8mp-specific irqsteer compatibleAlexander Stein1-1/+1
i.MX8MP irqsteer has power-domain support, so use a dedicated compatible. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-16arm64: dts: freescale: imx8mp-verdin: don't limit i2c2 max. clockMax Krummenacher1-2/+1
Verdin I2C2 may be used to access other I2C devices apart from serving as an HDMI DDC channel. Thus do not limit the used I2C clock frequency to 10kHz in the module specific device tree part. If an overlay configures i2c2 as DDC the overlay is also responsible to cope with an appropriate I2C clock. Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-16arm64: dts: freescale: imx8mm-verdin: don't limit i2c2 max. clockMax Krummenacher1-1/+1
Verdin I2C2 may be used to access other I2C devices apart from serving as an HDMI DDC channel. Thus do not limit the used I2C clock frequency to 10kHz in the module specific device tree part. If an overlay configures i2c2 as DDC the overlay is also responsible to cope with an appropriate I2C clock. Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-16arm64: dts: phygate-tauri-l: add overlays for RS232 and RS485Parthiban Nallathambi4-0/+197
UART2 and UART4 can used in following combination, 2 x RS232: - UART2 and UART4 without flow control - MUX selection GPIO3_20 must be held low 1 x RS232 + 1 x RS485: - UART2 - RS232 - UART4 - RS485 - MUX selection GPIO3_20 must be held high - RE/DE for RS485 controlled with GPIO3_25 1 x RS232 with flow control: - UART2 - RS232 - MUX selection GPIO3_20 must be held low Signed-off-by: Parthiban Nallathambi <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-16arm64: dts: phygate-tauri-l: enable pcie phyParthiban Nallathambi1-0/+10
I210 intel ethernet controller is connected to PCIe. Enable the PHY to use the ethernet controller. Signed-off-by: Parthiban Nallathambi <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIOTim Harvey1-1/+1
Fix the invalid BT shutdown GPIO (gpio1_io3 not gpio4_io16) Fixes: 716ced308234 ("arm64: dts: freescale: Add imx8mp-venice-gw73xx-2x") Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: freescale: ls1028a: Reorder sai dma-names to fix warningFrank Li1-18/+18
Reorder the SAI dma-names to ensure "rx" precedes "tx" as required to fixes the DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: audio-controller@f100000: dma-names:1: 'tx' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,sai.yaml# arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: audio-controller@f110000: dma-names:1: 'tx' was expected Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: freescale: ls1028a: Remove undocumented 'fsl,ls-pcie-ep'Frank Li1-2/+2
Remove the undocumented compatible string 'fsl,ls-pcie-ep' property from the ls1028a device tree source to fix DTB_CHECK warnings. arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: pcie-ep@3400000: compatible: ['fsl,ls1028a-pcie-ep', 'fsl,ls-pcie-ep'] is too long from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml# Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: imx8mq-librem5: Don't wake up on volume key pressGuido Günther1-2/+0
The only key that should wake up the phone is power button press. This prevents accidental wakeup due to e.g. pressing the buttons in the pocket or backpack and is in line what userspace uses to unblank the device. Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Martin Kepplinger <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Remove unused ocram nodeAlexander Stein1-5/+0
This node is unused and origins from downstream kernel where it is used for the DSP. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting nodeLiu Ying2-3/+5
We cannot use /delete-node/ directive to delete a node in a DT overlay. The node won't be deleted effectively. Instead, set the node's status property to "disabled" to achieve something similar. Fixes: eeb403df953f ("ARM: dts: imx53-qsb: add support for the HDMI expander") Signed-off-by: Liu Ying <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2 and PDK3Marek Vasut2-0/+78
Enable HDMI output on i.MX8MP DHCOM PDK2 and PDK3. The I2C5 on PDK2 and I2C mux port 1 on PDK3 respectively are used in regular I2C mode instead of HDMI DDC mode to permit connection of other I2C devices on those buses. The pinctrl_hdmi node is part of the SoM DTSI already. Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoMMarek Vasut1-1/+1
The IMX8MP_CLK_CLKOUT2 supplies the TC9595 bridge with 13 MHz reference clock. The IMX8MP_CLK_CLKOUT2 is supplied from IMX8MP_AUDIO_PLL2_OUT. The IMX8MP_CLK_CLKOUT2 operates only as a power-of-two divider, and the current 156 MHz is not power-of-two divisible to achieve 13 MHz. To achieve 13 MHz output from IMX8MP_CLK_CLKOUT2, set IMX8MP_AUDIO_PLL2_OUT to 208 MHz, because 208 MHz / 16 = 13 MHz. Fixes: 20d0b83e712b ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM") Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: imx8mp-evk: add bt-sco sound card supportShengjiu Wang1-0/+44
Add bt-sco sound card, which is used by BT HFP case. It supports wb profile as default Signed-off-by: Shengjiu Wang <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystemShengjiu Wang1-0/+3
Initialize audio PLL1 as the parent clock for 8kHz series rates, audio PLL2 as the parent clock for 11kHz series rates. that PLL1 and PLL2 can together support full range of audio sample rates. Signed-off-by: Shengjiu Wang <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8mp-evk: Add MX8-DLVDS-LCD1 display module supportLiu Ying3-0/+99
MX8-DLVDS-LCD1 display module integrates a KOE TX26D202VM0BWA LCD panel and a touch IC. Add an overlay to support the LCD panel on i.MX8MP EVK. Specify 148.5MHz clock frequency in panel-timing node to accommodate 3.5-fold 519.75MHz media_ldb clock which is derived from 1.0395GHz video_pll1 clock. Signed-off-by: Liu Ying <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: freescale: imx8mm-verdin: Fix GPU speedJoao Paulo Goncalves1-0/+1
The GPU clock was reduced on iMX8MM SOC device tree to prevent boards that don't support GPU overdrive from being out of specification. However, this caused a regression in GPU speed for the Verdin iMX8MM, which does support GPU overdrive. This patch fixes this by enabling overdrive mode in the SOM dtsi. Fixes: 1f794d3eed53 ("arm64: dts: imx8mm: Reduce GPU to nominal speed") Signed-off-by: Joao Paulo Goncalves <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm: Add GPU nodesChristian Gmeiner1-0/+1
Add the DT node for the GPU core found on the i.MX8QM. etnaviv-gpu 53100000.gpu: model: GC7000, revision: 6009 [drm] Initialized etnaviv 1.4.0 20151214 for etnaviv on minor 0 Signed-off-by: Christian Gmeiner <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm-mek: add fec2 supportFrank Li1-0/+40
Add fec2 support. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm: add ocopt and fec_mac[0,1]Frank Li1-0/+15
add ocotp ad fec_mac[0,1] for imx8qm. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm-mek: add lsio mu5 and mu6Frank Li1-0/+8
Add lsio mu5 and mu6. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm-mek: add flexcan supportFrank Li1-0/+80
Add flexcan[1,2,3] support for imx8qm-mek board. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm-mek: add cm41_i2c and children devicesFrank Li1-0/+27
Add cm41_i2c and devices under it for imx8qm-mek board. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm-mek: add i2c0 and children devicesFrank Li1-0/+50
Add i2c0 and all devices under it for imx8qm-mek board. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8x: add cm41 subsystem dtsiFrank Li2-0/+69
Add cm41 subsystem dtsi for iMX8X chips. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm-mek: add sai and wm8960 supportFrank Li1-0/+139
Add sai[0,1,6,7], wm8960 and asrc0 support. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8qm-ss-audio: add audio nodesFrank Li2-0/+559
Add i.MX8QM audio related nodes and update eDMA[0,1]'s information. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>;Frank Li1-1/+0
Different boards have different DDR memory sizes and layouts for reserved memory. This change reduces future dependencies to add 'imx8qm-ss-audio'. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8dxl-evk: add audio nodesFrank Li1-0/+229
Add audio nodes for imx8dxl-evk boards. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8dxl-ss-adma: update audio node power domains and IRQ numberFrank Li1-0/+64
The power domains of i.MX8DXL's acm is difference i.MX8QXP. IRQ number of sai[0..3] and spdif0 are also difference. Update power domains information for i.MX8DXL. Update sai[0..3] and spdif0's IRQ number for i.MX8DXL. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8dxl-ss-adma: delete unused nodeFrank Li1-0/+14
Delete unused node in adma subsystem. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: freescale: tqma8xx: Add partitions subnode to spi-norAlexander Stein1-2/+6
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: freescale: tqma8mq: Add partitions subnode to spi-norAlexander Stein1-2/+6
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: freescale: tqma8mpql: Add partitions subnode to spi-norAlexander Stein1-2/+6
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: freescale: tqma8mqnl: Add partitions subnode to spi-norAlexander Stein1-2/+6
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: freescale: tqma8mqml: Add partitions subnode to spi-norAlexander Stein1-2/+6
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: freescale: tqma9352: Add partitions subnode to spi-norAlexander Stein1-0/+6
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Direct children cause warnings like: 425e0000.spi: ofpart partition /soc@0/bus@42000000/spi@425e0000/flash@0/ partition@600000 (/soc@0/bus@42000000/spi@425e0000/flash@0) #size-cells is wrongly set to <0>, assuming <1> for parsing partitions. This is due flexspi node having #size-cells = <0>. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: mba93xxca: Add USB supportAlexander Stein1-12/+61
This adds support for both USB host and USB Type-C ports. This includes the on-board USB hub. Remove the gpio-hog for USB_RESET# as well. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: mba93xxla: Add USB supportAlexander Stein1-0/+61
This adds support for both USB host and USB Type-C ports. This includes the on-board USB hub. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-03arm64: dts: imx8mp-beacon-kit: Enable HDMI bridge HPDAdam Ford1-0/+2
The DSI to HDMI bridge supports hot-plut-detect, but the driver didn't previously support a shared IRQ GPIO. With the driver updated, the interrupt can be added to the bridge. Signed-off-by: Adam Ford <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-05-26Linux 6.10-rc1Linus Torvalds1-3/+3
2024-05-26mm: percpu: Include smp.h in alloc_tag.hKent Overstreet1-0/+1
percpu.h depends on smp.h, but doesn't include it directly because of circular header dependency issues; percpu.h is needed in a bunch of low level headers. This fixes a randconfig build error on mips: include/linux/alloc_tag.h: In function '__alloc_tag_ref_set': include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration] Reported-by: kernel test robot <[email protected]> Fixes: 24e44cc22aa3 ("mm: percpu: enable per-cpu allocation tagging") Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Kent Overstreet <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2024-05-26Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of ↵Linus Torvalds4-103/+68
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tool fix from Arnaldo Carvalho de Melo: "Revert a patch causing a regression. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels". * tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
2024-05-26Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"Arnaldo Carvalho de Melo4-103/+68
This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed at length in the threads in the Link tags below. The fix provided by Ian wasn't acceptable and work to fix this will take time we don't have at this point, so lets revert this and work on it on the next devel cycle. Reported-by: Linus Torvalds <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Bhaskar Chowdhury <[email protected]> Cc: Ethan Adams <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Tycho Andersen <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-05-25Merge tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-6/+34
Pull smb client fixes from Steve French: - two important netfs integration fixes - including for a data corruption and also fixes for multiple xfstests - reenable swap support over SMB3 * tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix missing set of remote_i_size cifs: Fix smb3_insert_range() to move the zero_point cifs: update internal version number smb3: reenable swapfiles over SMB3 mounts
2024-05-25Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of ↵Linus Torvalds13-69/+187
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "16 hotfixes, 11 of which are cc:stable. A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes, various singletons fixing various issues in various parts" * tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/ksm: fix possible UAF of stable_node mm/memory-failure: fix handling of dissolved but not taken off from buddy pages mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again nilfs2: fix potential hang in nilfs_detach_log_writer() nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix use-after-free of timer for log writer thread selftests/mm: fix build warnings on ppc64 arm64: patching: fix handling of execmem addresses selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages selftests/mm: compaction_test: fix bogus test success on Aarch64 mailmap: update email address for Satya Priya mm/huge_memory: don't unpoison huge_zero_folio kasan, fortify: properly rename memintrinsics lib: add version into /proc/allocinfo output mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
2024-05-25Merge tag 'irq-urgent-2024-05-25' of ↵Linus Torvalds3-12/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Fix x86 IRQ vector leak caused by a CPU offlining race - Fix build failure in the riscv-imsic irqchip driver caused by an API-change semantic conflict - Fix use-after-free in irq_find_at_or_after() * tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
Powered by cgit, Gruvboxed by Blaster4385.