| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the
kernel sources"), VMX_BASIC_MEM_TYPE_WB was removed. Use X86_MEMTYPE_WB
instead.
Fixes: 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the
kernel sources")
Signed-off-by: John Sperbeck <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
KVM selftests changes for 6.12:
- Fix a goof that caused some Hyper-V tests to be skipped when run on bare
metal, i.e. NOT in a VM.
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest.
- Explicitly include one-off assets in .gitignore. Past Sean was completely
wrong about not being able to detect missing .gitignore entries.
- Verify userspace single-stepping works when KVM happens to handle a VM-Exit
in its fastpath.
- Misc cleanups
|
|
Now that selftests support printf() in the guest, report unexpected
exceptions via the regular assertion framework. Exceptions were special
cased purely to provide a better error message. Convert only x86 for now,
as it's low-hanging fruit (already formats the assertion in the guest),
and converting x86 will allow adding asserts in x86 library code without
needing to update multiple tests.
Once all other architectures are converted, this will allow moving the
reporting to common code, which will in turn allow adding asserts in
common library code, and will also allow removing UCALL_UNHANDLED.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
KVM_CAP_HYPERV_DIRECT_TLBFLUSH is only reported when KVM runs on top of
Hyper-V and hyperv_evmcs/hyperv_svm_test don't need that, these tests check
that the feature is properly emulated for Hyper-V on KVM guests. There's no
corresponding CAP for that, the feature is reported in
KVM_GET_SUPPORTED_HV_CPUID.
Hyper-V specific CPUIDs are not reported by KVM_GET_SUPPORTED_CPUID,
implement dedicated kvm_hv_cpu_has() helper to do the job.
Fixes: 6dac1195181c ("KVM: selftests: Make Hyper-V tests explicitly require KVM Hyper-V support")
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Since there is 'hyperv.c' for Hyper-V specific functions already, move
Hyper-V specific functions out of processor.c there.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
|
|
Add udelay() for x86 tests to allow busy waiting in the guest for a
specific duration, and to match ARM and RISC-V's udelay() in the hopes
of eventually making udelay() available on all architectures.
Get the guest's TSC frequency using KVM_GET_TSC_KHZ and expose it to all
VMs via a new global, guest_tsc_khz. Assert that KVM_GET_TSC_KHZ returns
a valid frequency, instead of simply skipping tests, which would require
detecting which tests actually need/want udelay(). KVM hasn't returned an
error for KVM_GET_TSC_KHZ since commit cc578287e322 ("KVM: Infrastructure
for software and hardware based TSC rate scaling"), which predates KVM
selftests by 6+ years (KVM_GET_TSC_KHZ itself predates KVM selftest by 7+
years).
Note, if the GUEST_ASSERT() in udelay() somehow fires and the test doesn't
check for guest asserts, then the test will fail with a very cryptic
message. But fixing that, e.g. by automatically handling guest asserts,
is a much larger task, and practically speaking the odds of a test afoul
of this wart are infinitesimally small.
Signed-off-by: Reinette Chatre <[email protected]>
Link: https://lore.kernel.org/r/5aa86285d1c1d7fe1960e3fe490f4b22273977e6.1718214999.git.reinette.chatre@intel.com
Co-developed-by: Sean Christopherson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Use the max mappable GPA via GuestPhysBits advertised by KVM to calculate
max_gfn. Currently some selftests (e.g. access_tracking_perf_test,
dirty_log_test...) add RAM regions close to max_gfn, so guest may access
GPA beyond its mappable range and cause infinite loop.
Adjust max_gfn in vm_compute_max_gfn() since x86 selftests already
overrides vm_compute_max_gfn() specifically to deal with goofy edge cases.
Reported-by: Yi Lai <[email protected]>
Signed-off-by: Tao Su <[email protected]>
Tested-by: Yi Lai <[email protected]>
Reviewed-by: Xiaoyao Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sean: tweak name, add comment and sanity check]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Drop the @selector from the kernel code, data, and TSS builders and
instead hardcode the respective selector in the helper. Accepting a
selector but not a base makes the selector useless, e.g. the data helper
can't create per-vCPU for FS or GS, and so loading GS with KERNEL_DS is
the only logical choice.
And for code and TSS, there is no known reason to ever want multiple
segments, e.g. there are zero plans to support 32-bit kernel code (and
again, that would require more than just the selector).
If KVM selftests ever do add support for per-vCPU segments, it'd arguably
be more readable to add a dedicated helper for building/setting the
per-vCPU segment, and move the common data segment code to an inner
helper.
Lastly, hardcoding the selector reduces the probability of setting the
wrong selector in the vCPU versus what was created by the VM in the GDT.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Initialize x86's various segments in the GDT during creation of relevant
VMs instead of waiting until vCPUs come along. Re-installing the segments
for every vCPU is both wasteful and confusing, as is installing KERNEL_DS
multiple times; NOT installing KERNEL_DS for GS is icing on the cake.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a proper #define for the TSS selector instead of open coding 0x18 and
hoping future developers don't use that selector for something else.
Opportunistically rename the code and data selector macros to shorten the
names, align the naming with the kernel's scheme, and capture that they
are *kernel* segments.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Allocate x86's per-VM TSS at creation of a non-barebones VM. Like the
GDT, the TSS is needed to actually run vCPUs, i.e. every non-barebones VM
is all but guaranteed to allocate the TSS sooner or later.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that the per-VM, on-demand allocation logic in kvm_setup_gdt() and
vcpu_init_descriptor_tables() is gone, fold them into vcpu_init_sregs().
Note, both kvm_setup_gdt() and vcpu_init_descriptor_tables() configured the
GDT, which is why it looks like kvm_setup_gdt() disappears.
Opportunistically delete the pointless zeroing of the IDT limit (it was
being unconditionally overwritten by vcpu_init_descriptor_tables()).
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Replace the switch statement on vm->mode in x86's vcpu_init_sregs()'s with
a simple assert that the VM has a 48-bit virtual address space. A switch
statement is both overkill and misleading, as the existing code incorrectly
implies that VMs with LA57 would need different to configuration for the
LDT, TSS, and flat segments. In all likelihood, the only difference that
would be needed for selftests is CR4.LA57 itself.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Allocate the GDT during creation of non-barebones VMs instead of waiting
until the first vCPU is created, as the whole point of non-barebones VMs
is to be able to run vCPUs, i.e. the GDT is going to get allocated no
matter what.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Map x86's exception handlers at VM creation, not vCPU setup, as the
mapping is per-VM, i.e. doesn't need to be (re)done for every vCPU.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Initialize the IDT and exception handlers for all non-barebones VMs and
vCPUs on x86. Forcing tests to manually configure the IDT just to save
8KiB of memory is a terrible tradeoff, and also leads to weird tests
(multiple tests have deliberately relied on shutdown to indicate success),
and hard-to-debug failures, e.g. instead of a precise unexpected exception
failure, tests see only shutdown.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Rename vcpu_setup() to be more descriptive and precise, there is a whole
lot of "setup" that is done for a vCPU that isn't in said helper.
No functional change intended.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move x86's various descriptor table helpers in processor.c up above
kvm_arch_vm_post_create() and vcpu_setup() so that the helpers can be
made static and invoked from the aforementioned functions.
No functional change intended.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Fix an off-by-one bug in the initialization of the GDT limit, which as
defined in the SDM is inclusive, not exclusive.
Note, vcpu_init_descriptor_tables() gets the limit correct, it's only
vcpu_setup() that is broken, i.e. only tests that _don't_ invoke
vcpu_init_descriptor_tables() can have problems. And the fact that KVM
effectively initializes the GDT twice will be cleaned up in the near
future.
Signed-off-by: Ackerley Tng <[email protected]>
[sean: rewrite changelog]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that kvm_vm_arch exists, move the GDT, IDT, and TSS fields to x86's
implementation, as the structures are firmly x86-only.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a global snapshot of kvm_is_forced_emulation_enabled() and sync it to
all VMs by default so that core library code can force emulation, e.g. to
allow for easier testing of the intersections between emulation and other
features in KVM.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():
In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^
When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.
Reported-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Claudio Imbrenda <[email protected]>
Acked-by: Oliver Upton <[email protected]>
Acked-by: Anup Patel <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Allow the caller to set the initial state of the VM. Doing this
before sev_vm_launch() matters for SEV-ES, since that is the
place where the VMSA is updated and after which the guest state
becomes sealed.
Signed-off-by: Paolo Bonzini <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This removes the concept of "subtypes", instead letting the tests use proper
VM types that were recently added. While the sev_init_vm() and sev_es_init_vm()
are still able to operate with the legacy KVM_SEV_INIT and KVM_SEV_ES_INIT
ioctls, this is limited to VMs that are created manually with
vm_create_barebones().
Signed-off-by: Paolo Bonzini <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
KVM x86 PMU changes for 6.9:
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
|
|
KVM selftests changes for 6.9:
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
|
|
Extend sev_smoke_test to also run a minimal SEV-ES smoke test so that it's
possible to test KVM's unique VMRUN=>#VMEXIT path for SEV-ES guests
without needing a full blown SEV-ES capable VM, which requires a rather
absurd amount of properly configured collateral.
Punt on proper GHCB and ucall support, and instead use the GHCB MSR
protocol to signal test completion. The most important thing at this
point is to have _any_ kind of testing of KVM's __svm_sev_es_vcpu_run().
Cc: Tom Lendacky <[email protected]>
Cc: Michael Roth <[email protected]>
Cc: Peter Gonda <[email protected]>
Cc: Carlos Bilbao <[email protected]>
Tested-by: Carlos Bilbao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a library/APIs for creating and interfacing with SEV guests, all of
which need some amount of common functionality, e.g. an open file handle
for the SEV driver (/dev/sev), ioctl() wrappers to pass said file handle
to KVM, tracking of the C-bit, etc.
Add an x86-specific hook to initialize address properties, a.k.a. the
location of the C-bit. An arch specific hook is rather gross, but x86
already has a dedicated #ifdef-protected kvm_get_cpu_address_width() hook,
i.e. the ugliest code already exists.
Cc: Paolo Bonzini <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Vishal Annapurve <[email protected]>
Cc: Ackerly Tng <[email protected]>
cc: Andrew Jones <[email protected]>
Cc: Tom Lendacky <[email protected]>
Cc: Michael Roth <[email protected]>
Tested-by: Carlos Bilbao <[email protected]>
Originally-by: Michael Roth <[email protected]>
Signed-off-by: Peter Gonda <[email protected]>
Co-developed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add support for tagging and untagging guest physical address, e.g. to
allow x86's SEV and TDX guests to embed shared vs. private information in
the GPA. SEV (encryption, a.k.a. C-bit) and TDX (shared, a.k.a. S-bit)
steal bits from the guest's physical address space that is consumed by the
CPU metadata, i.e. effectively aliases the "real" GPA.
Implement generic "tagging" so that the shared vs. private metadata can be
managed by x86 without bleeding too many details into common code.
Cc: Paolo Bonzini <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Vishal Annapurve <[email protected]>
Cc: Ackerly Tng <[email protected]>
cc: Andrew Jones <[email protected]>
Cc: Tom Lendacky <[email protected]>
Cc: Michael Roth <[email protected]>
Tested-by: Carlos Bilbao <[email protected]>
Originally-by: Michael Roth <[email protected]>
Signed-off-by: Peter Gonda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Extract the code to set a vCPU's entry point out of vm_arch_vcpu_add() and
into a new API, vcpu_arch_set_entry_point(). Providing a separate API
will allow creating a KVM selftests hardness that can handle tests that
use different entry points for sub-tests, whereas *requiring* the entry
point to be specified at vCPU creation makes it difficult to create a
generic harness, e.g. the boilerplate setup/teardown can't easily create
and destroy the VM and vCPUs.
Signed-off-by: Thomas Huth <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
hyperv_clocksource_tsc_page too
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a PMU library for x86 selftests to help eliminate open-coded event
encodings, and to reduce the amount of copy+paste between PMU selftests.
Use the new common macro definitions in the existing PMU event filter test.
Cc: Aaron Lewis <[email protected]>
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Jinrong Liang <[email protected]>
Co-developed-by: Sean Christopherson <[email protected]>
Tested-by: Dapeng Mi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add vcpu_set_cpuid_property() helper function for setting properties, and
use it instead of open coding an equivalent for MAX_PHY_ADDR. Future vPMU
testcases will also need to stuff various CPUID properties.
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Jinrong Liang <[email protected]>
Co-developed-by: Sean Christopherson <[email protected]>
Tested-by: Dapeng Mi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sean: keep the newline in the "tsc\n" strncmp()]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Delete inaccurate descriptions and obsolete metadata for test cases.
It adds zero value, and has a non-zero chance of becoming stale and
misleading in the future. No functional changes intended.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Like Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Use the newfanged printf-based guest assert framework to spit out the
guest RIP when an unhandled exception is detected, which makes debugging
such failures *much* easier.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add an architecture specific ucall.h and inline the simple arch hooks,
e.g. the init hook for everything except ARM, and the actual "do ucall"
hook for everything except x86 (which should be simple, but temporarily
isn't due to carrying a workaround).
Having a per-arch ucall header will allow adding a #define for the
expected KVM exit reason for a ucall that is colocated (for everything
except x86) with the ucall itself.
Reviewed-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Preserve or clobber all GPRs (except RIP and RSP, as they're saved and
restored via the VMCS) when performing a ucall on x86 to fudge around a
horrific long-standing bug in selftests' nested VMX support where L2's
GPRs are not preserved across a nested VM-Exit. I.e. if a test triggers a
nested VM-Exit to L1 in response to a ucall, e.g. GUEST_SYNC(), then L2's
GPR state can be corrupted.
The issues manifests as an unexpected #GP in clear_bit() when running the
hyperv_evmcs test due to RBX being used to track the ucall object, and RBX
being clobbered by the nested VM-Exit. The problematic hyperv_evmcs
testcase is where L0 (test's host userspace) injects an NMI in response to
GUEST_SYNC(8) from L2, but the bug could "randomly" manifest in any test
that induces a nested VM-Exit from L0. The bug hasn't caused failures in
the past due to sheer dumb luck.
The obvious fix is to rework the nVMX helpers to save/restore L2 GPRs
across VM-Exit and VM-Enter, but that is a much bigger task and carries
its own risks, e.g. nSVM does save/restore GPRs, but not in a thread-safe
manner, and there is a _lot_ of cleanup that can be done to unify code
for doing VM-Enter on nVMX, nSVM, and eVMCS.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
There is a spelling mistake in a test report message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Take the XFeature mask in __vm_xsave_require_permission() instead of the
bit so that there's no need to define macros for both the bit and the
mask. Asserting that only a single bit is set and retrieving said bit
is easy enough via log2 helpers.
Opportunistically clean up the error message for the
ARCH_REQ_XCOMP_GUEST_PERM sanity check.
Reviewed-by: Aaron Lewis <[email protected]>
Tested-by: Aaron Lewis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
There is a 'malloc' call in vcpu_save_state function, which can
be unsuccessful. This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Ivan Orlov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Align the guest stack to match calling sequence requirements in
section "The Stack Frame" of the System V ABI AMD64 Architecture
Processor Supplement, which requires the value (%rsp + 8), NOT %rsp,
to be a multiple of 16 when control is transferred to the function
entry point. I.e. in a normal function call, %rsp needs to be 16-byte
aligned _before_ CALL, not after.
This fixes unexpected #GPs in guest code when the compiler uses SSE
instructions, e.g. to initialize memory, as many SSE instructions
require memory operands (including those on the stack) to be
16-byte-aligned.
Signed-off-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls,
which have a different register ABI, can reuse the VMCALL vs. VMMCALL
logic.
No functional change intended.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Use the host CPU's native hypercall instruction, i.e. VMCALL vs. VMMCALL,
in kvm_hypercall(), as relying on KVM to patch in the native hypercall on
a #UD for the "wrong" hypercall requires KVM_X86_QUIRK_FIX_HYPERCALL_INSN
to be enabled and flat out doesn't work if guest memory is encrypted with
a private key, e.g. for SEV VMs.
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Signed-off-by: Vishal Annapurve <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Cache the host CPU vendor for userspace and share it with guest code.
All the current callers of this_cpu* actually care about host cpu so
they are updated to check host_cpu_is*.
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Signed-off-by: Vishal Annapurve <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Replace is_intel/amd_cpu helpers with this_cpu_* helpers to better
convey the intent of querying vendor of the current cpu.
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Signed-off-by: Vishal Annapurve <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Fix a == vs. = typo in kvm_get_cpu_address_width() that results in
@pa_bits being left unset if the CPU doesn't support enumerating its
MAX_PHY_ADDR. Flagged by clang's unusued-value warning.
lib/x86_64/processor.c:1034:51: warning: expression result unused [-Wunused-value]
*pa_bits == kvm_cpu_has(X86_FEATURE_PAE) ? 36 : 32;
Fixes: 3bd396353d18 ("KVM: selftests: Add X86_FEATURE_PAE and use it calc "fallback" MAXPHYADDR")
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|