aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/tests/builtin-test.c
AgeCommit message (Collapse)AuthorFilesLines
2024-07-31perf test: Add landlock workloadHoward Chu1-0/+1
We'll use it to add a regression test for the BTF augmentation of enum arguments for tracepoints in 'perf trace': root@x1:~# perf trace -e landlock_add_rule perf test -w landlock 0.000 ( 0.009 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd8e258594, flags: 45) = -1 EINVAL (Invalid argument) 0.011 ( 0.002 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd8e2585a0, flags: 45) = -1 EINVAL (Invalid argument) root@x1:~# Committer notes: It was agreed on the discussion (see Link below) to shorten then name of the workload from 'landlock_add_rule' to 'landlock', and I moved it to a separate patch. Also, to address a build failure from Namhyung, I stopped loading linux/landlock.h and instead added the used defines, enums and types to make this build in older systems. All we want is to emit the syscall and intercept it. Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Howard Chu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/CAH0uvohaypdTV6Z7O5QSK+va_qnhZ6BP6oSJ89s1c1E0CjgxDA@mail.gmail.com Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-04-26perf test: Reintroduce -p/--parallel and make -S/--sequential the defaultArnaldo Carvalho de Melo1-1/+7
We can't default to doing parallel tests as there are tests that compete for the same resources and thus clash, for instance tests that put in place 'perf probe' probes, that clean the probes without regard to other tests needs, ARM64 coresight tests, Intel PT ones, etc. So reintroduce --p/--parallel and make -S/--sequential the default. We need to come up with infrastructure that state which tests can't run in parallel because they need exclusive access to some resource, something as simple as "probes" that would then avoid 'perf probe' tests from running while other such test is running, or make the tests more resilient, till then we can't use parallel mode as default. While at it, document all these options in the 'perf test' man page. Reported-by: Adrian Hunter <[email protected]> Reported-by: Arnaldo Carvalho de Melo <[email protected]> Reported-by: James Clark <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/Ziwm18BqIn_vc1vn@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-03-21perf tests: Run tests in parallel by defaultIan Rogers1-7/+10
Switch from running tests sequentially to running in parallel by default. Change the opt-in '-p' or '--parallel' flag to '-S' or '--sequential'. On an 8 core tigerlake an address sanitizer run time changes from: 326.54user 622.73system 6:59.91elapsed 226%CPU to: 973.02user 583.98system 3:01.17elapsed 859%CPU So over twice as fast, saving 4 minutes. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-03-21perf test: Read child test 10 times a second rather than 1Ian Rogers1-2/+2
Make the perf test output smoother by timing out the poll of the child process after 100ms rather than 1s. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-03-21perf test: Use a single fd for the child process out/errIan Rogers1-31/+6
Switch from dumping err then out, to a single file descriptor for both of them. This allows the err and output to be correctly interleaved in verbose output. Fixes: b482f5f8e0168f1e ("perf tests: Add option to run tests in parallel") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-02-22perf tests: Add option to run tests in parallelIan Rogers1-99/+215
By default tests are forked, add an option (-p or --parallel) so that the forked tests are all started in parallel and then their output gathered serially. This is opt-in as running in parallel can cause test flakes. Rather than fork within the code, the start_command/finish_command from libsubcmd are used. This changes how stderr and stdout are handled. The child stderr and stdout are always read to avoid the child blocking. If verbose is 1 (-v) then if the test fails the child stdout and stderr are displayed. If the verbose is >1 (e.g. -vv) then the stdout and stderr from the child are immediately displayed. An unscientific test on my laptop shows the wall clock time for perf test without parallel being 5 minutes 21 seconds and with parallel (-p) being 1 minute 50 seconds. Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kan Liang <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: [email protected] Signed-off-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-22perf tests: Run time generate shell test suitesIan Rogers1-87/+3
Rather than special shell test logic, do a single pass to create an array of test suites. Hold the shell test file name in the test suite priv field. This makes the special shell test logic in builtin-test.c redundant so remove it. Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kan Liang <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: [email protected] Signed-off-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-22perf tests: Use scandirat for shell script findingIan Rogers1-12/+8
Avoid filename appending buffers by using openat, faccessat and scandirat more widely. Turn the script's path back to a file name using readlink from /proc/<pid>/fd/<fd>. Read the script's description using api/io.h to avoid fdopen conversions. Whilst reading perform additional sanity checks on the script's contents. Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kan Liang <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: [email protected] Signed-off-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-22perf test: Rename builtin-test-list and add missed header guardIan Rogers1-1/+1
builtin-test-list is primarily concerned with shell script tests. Rename the file to better reflect this and add a missed header guard. Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kan Liang <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: [email protected] Signed-off-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-18perf tests: Make DSO tests a suite rather than individualIan Rogers1-2/+0
Make the DSO data tests a suite rather than individual so their output is grouped. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-11-27perf test: Use existing config value for objdump pathJames Clark1-1/+1
There is already an existing config value for changing the objdump path, so instead of having two values that do the same thing, make 'perf test' use annotate.objdump as well. Signed-off-by: James Clark <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-11-09perf test: Add support for setting objdump binary via perf configJames Clark1-0/+12
Add a 'perf config' variable that does the same thing as "perf test --objdump <x>". Also update the man page. Committer testing: # perf config test.objdump # perf test "object code reading" 26: Object code reading : Ok # perf config test.objdump=blah # perf config test.objdump test.objdump=blah # perf test "object code reading" 26: Object code reading : FAILED! # perf test -v "object code reading" 26: Object code reading : --- start --- test child forked, pid 600599 Looking at the vmlinux_path (8 entries long) Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' Using CPUID AuthenticAMD-25-21-0 mmap size 528384B Reading object code for memory address: 0x4d9a02 File is: /home/acme/bin/perf On file address is: 0xd9a02 Objdump command is: blah -z -d --start-address=0x4d9a02 --stop-address=0x4d9a82 /home/acme/bin/perf objdump read too few bytes: 128 Bytes read differ from those read by objdump buf1 (dso): 0x48 0x85 0xff 0x74 0x29 0xe8 0x94 0xdf 0x07 0x00 0x8b 0x73 0x1c 0x48 0x8b 0x43 0x08 0xeb 0xa5 0x0f 0x1f 0x00 0x48 0x8b 0x45 0xe8 0x64 0x48 0x2b 0x04 0x25 0x28 0x00 0x00 0x00 0x75 0x0f 0x48 0x8b 0x5d 0xf8 0xc9 0xc3 0x0f 0x1f 0x00 0x48 0x8b 0x43 0x08 0xeb 0x84 0xe8 0xc5 0x3e 0xf3 0xff 0x0f 0x1f 0x44 0x00 0x00 0x55 0x48 0x89 0xe5 0x41 0x56 0x41 0x55 0x49 0x89 0xd5 0x41 0x54 0x49 0x89 0xfc 0x53 0x48 0x89 0xf3 0x48 0x83 0xec 0x30 0x48 0x8b 0x7e 0x20 0x64 0x48 0x8b 0x04 0x25 0x28 0x00 0x00 0x00 0x48 0x89 0x45 0xd8 0x31 0xc0 0x48 0x89 0x75 0xb0 0x48 0xc7 0x45 0xb8 0x00 0x00 0x00 0x00 0x48 0xc7 0x45 0xc0 0x00 0x00 0x00 0x00 0xe8 0xad 0xfa buf2 (objdump): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 test child finished with -1 ---- end ---- Object code reading: FAILED! # perf config test.objdump=/usr/bin/objdump # perf config test.objdump test.objdump=/usr/bin/objdump # perf test "object code reading" 26: Object code reading : Ok # Signed-off-by: James Clark <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Tom Rix <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-11-09perf test: Add option to change objdump binaryJames Clark1-0/+3
All of the other Perf subcommands that use objdump have an option to specify the binary, so add the same option to 'perf test'. This is useful if you have built the kernel with a different toolchain to the system one, where the system objdump may fail to disassemble vmlinux. Now this can be fixed with something like this: $ perf test --objdump llvm-objdump "object code reading" Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: James Clark <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Tom Rix <[email protected]> Cc: Yang Jihong <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-09-12perf util: Add a function for replacing characters in a stringJames Clark1-0/+1
It finds all occurrences of a single character and replaces them with a multi character string. This will be used in a test in a following commit. Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: James Clark <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Chen Zhongjin <[email protected]> Cc: Eduard Zingerman <[email protected]> Cc: Haixin Yu <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jing Zhang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yang Jihong <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-15perf parse-events: Remove BPF event supportIan Rogers1-2/+0
New features like the BPF --filter support in perf record have made the BPF event functionality somewhat redundant. As shown by commit fcb027c1a4f6 ("perf tools: Revert enable indices setting syntax for BPF map") and commit 14e4b9f4289a ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility") the BPF event support hasn't been well maintained and it adds considerable complexity in areas like event parsing, not least as '/' is a separator for event modifiers as well as in paths. This patch removes support in the event parser for BPF events and then the associated functions are removed. This leads to the removal of whole source files like bpf-loader.c. Removing support means that augmented syscalls in perf trace is broken, this will be fixed in a later commit adding support using BPF skeletons. The removal of BPF events causes an unused label warning from flex generated code, so update build to ignore it: ``` util/parse-events-flex.c:2704:1: error: label ‘find_rule’ defined but not used [-Werror=unused-label] 2704 | find_rule: /* we branch to this label when backing up */ ``` Committer notes: Extracted from a larger patch that was also removing the support for linking with libllvm and libclang, that were an alternative to using an external clang execution to compile the .c event source code into BPF bytecode. Testing it: # perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c' \___ Bad event or PMU Unabled to find PMU or event on a PMU of 'home' Initial error: event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c' \___ Cannot find PMU `home'. Missing kernel support? Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Brendan Gregg <[email protected]> Cc: Carsten Haitzler <[email protected]> Cc: Eduard Zingerman <[email protected]> Cc: Fangrui Song <[email protected]> Cc: He Kuang <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rob Herring <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Tom Rix <[email protected]> Cc: Wang Nan <[email protected]> Cc: Wang ShaoBo <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Yonghong Song <[email protected]> Cc: YueHaibing <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-15perf bpf: Remove support for embedding clang for compiling BPF events (-e foo.c)Ian Rogers1-1/+0
This never was in the default build for perf, is difficult to maintain as it uses clang/llvm internals so ditch it, keeping, for now, the external compilation of .c BPF into .o bytecode and its subsequent loading, that is also going to be removed, do it separately to help bisection and to properly document what is being removed and why. Committer notes: Extracted from a larger patch and removed some leftovers, namely deleting these now unused feature tests: tools/build/feature/test-clang.cpp tools/build/feature/test-cxx.cpp tools/build/feature/test-llvm-version.cpp tools/build/feature/test-llvm.cpp Testing the use of BPF events after applying this patch: To use the external clang/llvm toolchain to compile a .c event and then use libbpf to load it, to get the syscalls:sys_enter_open* tracepoints and read the filename pointer, putting it into the ring buffer right after the usual tracepoint payload for 'perf trace' to then print it: [root@quaco ~]# perf trace -e /home/acme/git/perf-tools-next/tools/perf/examples/bpf/augmented_raw_syscalls.c,open* --max-events=10 0.000 systemd-oomd/959 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12 0.083 abrt-dump-jour/1453 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4 0.063 abrt-dump-jour/1454 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4 0.082 abrt-dump-jour/1455 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4 250.124 systemd-oomd/959 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12 250.521 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/[email protected]/app.slice/memory.pressure", flags: RDONLY|CLOEXEC) = 12 251.047 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/[email protected]/app.slice/memory.current", flags: RDONLY|CLOEXEC) = 12 251.162 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/[email protected]/app.slice/memory.min", flags: RDONLY|CLOEXEC) = 12 251.242 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/[email protected]/app.slice/memory.low", flags: RDONLY|CLOEXEC) = 12 251.353 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/[email protected]/app.slice/memory.swap.current", flags: RDONLY|CLOEXEC) = 12 [root@quaco ~]# Same thing, but with a prebuilt .o BPF bytecode: [root@quaco ~]# perf trace -e /home/acme/git/perf-tools-next/tools/perf/examples/bpf/augmented_raw_syscalls.o,open* --max-events=10 0.000 systemd-oomd/959 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12 0.083 abrt-dump-jour/1453 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4 0.083 abrt-dump-jour/1455 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4 0.062 abrt-dump-jour/1454 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4 249.985 systemd-oomd/959 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12 466.763 thermald/1234 openat(dfd: CWD, filename: "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:2/energy_uj") = 13 467.145 thermald/1234 openat(dfd: CWD, filename: "/sys/class/powercap/intel-rapl/intel-rapl:0/energy_uj") = 13 467.311 thermald/1234 openat(dfd: CWD, filename: "/sys/class/thermal/thermal_zone2/temp") = 13 500.040 cgroupify/24006 openat(dfd: 4, filename: ".", flags: RDONLY|CLOEXEC|DIRECTORY|NONBLOCK) = 5 500.295 cgroupify/24006 openat(dfd: 4, filename: "24616/cgroup.procs") = 5 [root@quaco ~]# Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Brendan Gregg <[email protected]> Cc: Carsten Haitzler <[email protected]> Cc: Eduard Zingerman <[email protected]> Cc: Fangrui Song <[email protected]> Cc: He Kuang <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: "Naveen N. Rao" <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rob Herring <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Tom Rix <[email protected]> Cc: Wang Nan <[email protected]> Cc: Wang ShaoBo <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Yonghong Song <[email protected]> Cc: YueHaibing <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-24perf test: Avoid weak symbol for arch_testsIan Rogers1-1/+10
GCC LTO will complain that the array length varies for the arch_tests weak symbol. Use extern/static and architecture determining #if to workaround this problem. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Carsten Haitzler <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Tom Rix <[email protected]> Cc: Xing Zhengjun <[email protected]> Cc: Yang Jihong <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-23perf symbol: Remove now unused symbol_conf.sort_by_nameIan Rogers1-1/+0
Previously used to specify symbol_name_rb_node was in use. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Carsten Haitzler <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Jason Wang <[email protected]> Cc: Changbin Du <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Kan Liang <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-05-26perf tests: Organize cpu_map tests into a single suiteIan Rogers1-4/+1
Go from 4 suites to a single suite with 4 test cases. Reviewed-by: Kan Liang <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ali Saidi <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Dmitrii Dolgov <[email protected]> Cc: Huacai Chen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jing Zhang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kang Minchul <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mike Leach <[email protected]> Cc: Ming Wang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rob Herring <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Will Deacon <[email protected]> Cc: Xing Zhengjun <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-05-26perf cpumap: Add intersect functionIan Rogers1-0/+1
The merge function gives the union of two cpu maps. Add an intersect function which is necessary, for example, when intersecting a PMUs supported CPUs with user requested. Reviewed-by: Kan Liang <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ali Saidi <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Dmitrii Dolgov <[email protected]> Cc: Huacai Chen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jing Zhang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kang Minchul <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mike Leach <[email protected]> Cc: Ming Wang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rob Herring <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Will Deacon <[email protected]> Cc: Xing Zhengjun <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-04-14perf test: Simplify for_each_test() to avoid tripping on -Werror=array-boundsArnaldo Carvalho de Melo1-2/+2
When cross building on debian to the mips 32-bit arch we get these warnings: In function '__cmd_test', inlined from 'cmd_test' at tests/builtin-test.c:561:9: tests/builtin-test.c:260:66: error: array subscript 1 is outside array bounds of 'struct test_suite *[1]' [-Werror=array-bounds] 260 | for (k = 0, t = tests[j][k]; tests[j][k]; k++, t = tests[j][k]) | ^ tests/builtin-test.c:369:9: note: in expansion of macro 'for_each_test' 369 | for_each_test(j, k, t) { | ^~~~~~~~~~~~~ tests/builtin-test.c: In function 'cmd_test': tests/builtin-test.c:36:27: note: at offset 4 into object 'arch_tests' of size 4 36 | struct test_suite *__weak arch_tests[] = { | ^~~~~~~~~~ cc1: all warnings being treated as errors Switch to using a while(!sentinel) for the second level of the 'tests' array to avoid that compiler complaint. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-01-22perf test: Add Symbols testAdrian Hunter1-0/+3
Add a test to check function symbols do not overlap and are not zero length. The main motivation for the test is to make it easier to review changes to PLT symbol synthesis i.e. changes to dso__synthesize_plt_symbols(). By default the test uses the perf executable as a test DSO, but a specific DSO can be specified via a new perf test option "--dso". The test is useful in the following ways: - Any DSO can be tested, even ones that do not run on the current architecture. For example, using cross-compiled DSOs to see how well perf handles different architectures. - With verbose > 1 (e.g. -vv), all the symbols are printed, which makes it easier to see issues. - perf removes duplicate symbols and expands zero-length symbols to reach the next symbol, however that is done before adding synthesized symbols, so the test is checking those also. Example: $ perf test -v Symbols 74: Symbols : --- start --- test child forked, pid 154918 Testing /home/user/bin/perf Overlapping symbols: 7d000-7f3a0 g _init 7d030-7d040 g __printf_chk@plt test child finished with -1 ---- end ---- Symbols: FAILED! Note the test fails because perf expands the _init symbol over the PLT because there are no PLT symbols at that point, but then dso__synthesize_plt_symbols() creates them. Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-12-20perf tools: Fix usage of the verbose variableYang Jihong1-1/+1
The data type of the verbose variable is integer and can be negative, replace improperly used cases in a unified manner: 1. if (verbose) => if (verbose > 0) 2. if (!verbose) => if (verbose <= 0) 3. if (XX && verbose) => if (XX && verbose > 0) 4. if (XX && !verbose) => if (XX && verbose <= 0) Reviewed-by: Adrian Hunter <[email protected]> Signed-off-by: Yang Jihong <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Carsten Haitzler <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-12-14perf build: Use libtraceevent from the systemIan Rogers1-0/+6
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Athira Rajeev <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-12-14perf test: Add event group test for events in multiple PMUsRavi Bangoria1-0/+1
Multiple events in a group can belong to one or more PMUs, however there are some limitations. One of the limitations is that perf doesn't allow creating a group of events from different hw PMUs. Write a simple test to create various combinations of hw, sw and uncore PMU events and verify group creation succeeds or fails as expected. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Kan Liang <[email protected]> Acked-by: Madhavan Srinivasan <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ananth Narayan <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Carsten Haitzler <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Santosh Shukla <[email protected]> Cc: Thomas Richter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-11-23perf test: Add 'datasym' test workloadNamhyung Kim1-0/+1
The datasym workload is to check if perf mem command gets the data addresses precisely. This is needed for data symbol test. $ perf test -w datasym I had to keep the buf1 in the data section, otherwise it could end up in the BSS and was mmaped as a separate //anon region, then it was not symbolized at all. It needs to be fixed separately. Committer notes: Add a -U _FORTIFY_SOURCE to the datasym CFLAGS, as the main perf flags set it and it requires building with optimization, and this new test has a -O0. Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: German Gomez <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Zhengjun Xing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-11-23perf test: Add 'brstack' test workloadNamhyung Kim1-0/+1
The brstack is to run different kinds of branches repeatedly. This is necessary for brstack test case to verify if it has correct branch info. $ perf test -w brstack I renamed the internal functions to have brstack_ prefix as it's too generic name. Add a -U_FORTIFY_SOURCE to the brstack CFLAGS, as the main perf flags set it and it requires building with optimization, and this new test has a -O0. Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: German Gomez <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Zhengjun Xing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-11-23perf test: Add 'sqrtloop' test workloadNamhyung Kim1-0/+1
The sqrtloop creates a child process to run an infinite loop calling sqrt() with rand(). This is needed for ARM SPE fork test. $ perf test -w sqrtloop It can take an optional argument to specify how long it will run in seconds (default: 1). Committer notes: Explicitely ignored the sqrt() return to fix the build on systems where the compiler complains it isn't being used. And added a sqrtloop specific CFLAGS to disable optimizations to make this a bit more robust wrt dead code elimination. Doing that a -U_FORTIFY_SOURCE needs to be added, as -O0 is incompatible with it. Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: German Gomez <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Zhengjun Xing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-11-23perf test: Add 'leafloop' test workloadNamhyung Kim1-0/+1
The leafloop workload is to run an infinite loop in the test_leaf function. This is needed for the ARM fp callgraph test to verify if it gets the correct callchains. $ perf test -w leafloop Committer notes: Add a: -U_FORTIFY_SOURCE to the leafloop CFLAGS as the main perf flags set it and it requires building with optimization, and this new test has a -O0. Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: German Gomez <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Zhengjun Xing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-11-20perf test: Add 'thloop' test workloadNamhyung Kim1-0/+1
The thloop is similar to noploop but runs in two threads. This is needed to verify perf record --per-thread to handle multi-threaded programs properly. $ perf test -w thloop It also takes an optional argument to specify runtime in seconds (default: 1). Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: German Gomez <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Zhengjun Xing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-11-20perf test: Add -w/--workload optionNamhyung Kim1-0/+24
The -w/--workload option is to run a simple workload used by testing. This adds a basic framework to run the workloads and 'noploop' workload as an example. $ perf test -w noploop The noploop does a loop doing nothing (NOP) for a second by default. It can have an optional argument to specify the time in seconds. Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: German Gomez <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Zhengjun Xing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-13perf test: Refactor shell tests allowing subdirsCarsten Haitzler1-134/+18
This is a prelude to adding more tests to shell tests and in order to support putting those tests into subdirectories, I need to change the test code that scans/finds and runs them. To support subdirs I have to recurse so it's time to refactor the code to allow this and centralize the shell script finding into one location and only one single scan that builds a list of all the found tests in memory instead of it being duplicated in 3 places. This code also optimizes things like knowing the max width of desciption strings (as we can do that while we scan instead of a whole new pass of opening files). It also more cleanly filters scripts to see only *.sh files thus skipping random other files in directories like *~ backup files, other random junk/data files that may appear and the scripts must be executable to make the cut (this ensures the script lib dir is not seen as scripts to run). This avoids perf test running previous older versions of test scripts that are editor backup files as well as skipping perf.data files that may appear and so on. Reviewed-by: Leo Yan <[email protected]> Signed-off-by: Carsten Haitzler <[email protected]> Tested-by: Leo Yan <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-23perf test: Skip reason for suites with 1 testIan Rogers1-3/+3
When a suite has just 1 subtest, the subtest number is given as -1 to avoid indented printing. When this subtest number is seen for the skip reason, use the reason of the first test. Reviewed-by: John Garry <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Carsten Haitzler <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Marco Elver <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Sohaib Mohamed <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-23Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo1-2/+6
To get the rest of 5.18. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-05-21perf test: Avoid shell test description infinite loopIan Rogers1-2/+6
for_each_shell_test() is already strict in expecting tests to be files and executable. It is sometimes possible when it iterates over all files that it finds one that is executable and lacks a newline character. When this happens the loop never terminates as it doesn't check for EOF. Add the EOF check to make this loop at least bounded by the file size. If the description is returned as NULL then also skip the test. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Marco Elver <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Sohaib Mohamed <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-11perf test: Shell - Limit to only run executable scripts in testsCarsten Haitzler1-1/+3
'perf test''s shell runner will just run everything in the tests directory (as long as it's not another directory or does not begin with a dot), but sometimes you find files in there that are not shell scripts - perf.data output for example if you do some testing and then the next time you run perf test it tries to run these. Check the files are executable so they are actually intended to be test scripts and not just some "random junk" files there. Signed-off-by: Carsten Haitzler <[email protected]> Reviewed-by: Leo Yan <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-21perf test: Use 3 digits for test numbering now we can have more testsCarsten Haitzler1-6/+6
This is in preparation for adding more tests that will need the test number to be 3 digts so they align nicely in the output. Reviewed-by: Leo Yan <[email protected]> Signed-off-by: Carsten Haitzler <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16perf bench: Use unbuffered output when pipe/tee'ing to a fileSohaib Mohamed1-0/+3
The output of 'perf bench' gets buffered when I pipe it to a file or to tee, in such a way that I can see it only at the end. E.g. $ perf bench internals synthesize -t < output comes out fine after each test run > $ perf bench internals synthesize -t | tee file.txt < output comes out only at the end of all tests > This patch resolves this issue for 'bench' and 'test' subcommands. See, also: $ perf bench mem all | tee file.txt $ perf bench sched all | tee file.txt $ perf bench internals all -t | tee file.txt $ perf bench internals all | tee file.txt Committer testing: It really gets staggered, i.e. outputs in bursts, when the buffer fills up and has to be drained to make up space for more output. Suggested-by: Riccardo Mancini <[email protected]> Signed-off-by: Sohaib Mohamed <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fabian Hemmer <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-07perf test sigtrap: Add basic stress test for sigtrap handlingMarco Elver1-0/+1
Add basic stress test for sigtrap handling as a perf tool built-in test. This allows sanity checking the basic sigtrap functionality from within the perf tool. Committer notes: Reported that !root was getting -EPERM, applied a fixup from Marco to set .exclude_{hv,kernel} that made it work. Signed-off-by: Marco Elver <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fabian Hemmer <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Remove skip_if_failIan Rogers1-16/+8
Remove optionality, always run tests in a suite even if one fails. This brings perf's test more inline with kunit that lacks this notion. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Remove is_supported functionIan Rogers1-13/+1
All tests now return TEST_SKIP if not supported. Removing this function brings perf's test_suite struct more inline with kunit. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Remove non test case style support.Ian Rogers1-9/+16
Convert shell tests to also run using test case style. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Remove now unused subtest helpersIan Rogers1-10/+1
Replaced by null terminated test case array. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Add skip reason to test case.Ian Rogers1-0/+3
This doesn't exist in kunit, but will ease the transition from perf tests. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Add test case struct.Ian Rogers1-6/+24
Add a test case struct mirroring the 'struct kunit_case'. Use the struct with the DEFINE_SUITE macro, where the single test is turned into a test case. Update the helpers in builtin-test to handle test cases. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Add helper functions for abstraction.Ian Rogers1-28/+66
Abstract certain test features so that they can be refactored in later changes. No functional change. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Rename struct test to test_suiteIan Rogers1-10/+10
This is to align with kunit's terminology. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Move each test suite struct to its testIan Rogers1-213/+72
Rather than export test functions, export the test struct. Rename with a suite__ prefix to avoid name collisions. Committer notes: Its '&suite__vectors_page', not '&suite__vectors_pages', noticed when cross building to arm (32-bit). Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Make each test/suite its own struct.Ian Rogers1-105/+168
By switching to an array of pointers to tests (later to be suites) the definition of the tests can be moved to the file containing the tests. Committer notes: It's "&vectors_page", not "&vectors_pages", noticed when cross building to 32-bit ARM. Also the DEFINE_SUITE(vectors_page) should be done where its function is implemented, in tools/perf/arch/arm/tests/vectors-page.c, so that we can make it static, as we don't have anymore its declaration in tests.h. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-12perf test: Use macro for "suite" definitionsIan Rogers1-330/+149
Add a macro to simplify later refactoring. No functional change. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sohaib Mohamed <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Brendan Higgins <[email protected]> Cc: Daniel Latypov <[email protected]> Cc: David Gow <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jin Yao <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.