aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/tests
AgeCommit message (Collapse)AuthorFilesLines
2024-10-23perf test: Handle perftool-testsuite_probe failure due to broken DWARFVeronika Molnarova1-15/+54
Test case test_adding_blacklisted ends in failure if the blacklisted probe is of an assembler function with no DWARF available. At the same time, probing the blacklisted function with ASM DWARF doesn't test the blacklist itself as the failure is a result of the broken DWARF. When the broken DWARF output is encountered, check if the probed function was compiled by the assembler. If so, the broken DWARF message is expected and does not report a perf issue, else report a failure. If the ASM DWARF affected the probe, try the next probe on the blacklist. If the first 5 probes are defective due to broken DWARF, skip the test case. Fixes: def5480d63c1e847 ("perf testsuite probe: Add test for blacklisted kprobes handling") Signed-off-by: Veronika Molnarova <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Veronika Molnarova <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-11perf pmus: Fake PMU clean upIan Rogers2-9/+7
Rather than passing a fake PMU around, just pass that the fake PMU should be used - true when doing testing. Move the fake PMU into pmus.[ch] and try to abstract the PMU's properties in pmu.c, ie so there is less "if fake_pmu" in non-PMU code. Give the fake PMU a made up type number. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Benjamin Gray <[email protected]> Cc: Changbin Du <[email protected]> Cc: Clément Le Goffic <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Dr. David Alan Gilbert <[email protected]> Cc: Howard Chu <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jing Zhang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Veronika Molnarova <[email protected]> Cc: Weilin Wang <[email protected]> Cc: Will Deacon <[email protected]> Cc: Xu Yang <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Yicong Yang <[email protected]> Cc: Ze Gao <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-11perf test shell probe_vfs_getname: Remove extraneous '=' from probe line ↵Arnaldo Carvalho de Melo1-2/+2
number regex Thomas reported the vfs_getname perf tests failing on s/390, it seems it was just to some extraneous '=' somehow getting into the regexp, remove it, now: root@x1:~# perf test getname 91: Add vfs_getname probe to get syscall args filenames : Ok 93: Use vfs_getname probe to get syscall args filenames : FAILED! 126: Check open filename arg using perf trace + vfs_getname : Ok root@x1:~# Second one remains a mistery, have to take some time to nail it down. Reported-by: Thomas Richter <[email protected]> Tested-by: Thomas Richter <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Gordeev <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Vasily Gorbik <[email protected]>, Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-11perf parse-events: Remove duplicated include in parse-events.cYang Li1-1/+0
The header files parse-events.h is included twice in parse-events.c, so one inclusion of each can be removed. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Reviewed-by: James Clark <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10822 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-10perf inject: Lazy build-id mmap2 event insertionIan Rogers1-0/+1
Add -B option that lazily inserts mmap2 events thereby dropping all mmap events without samples. This is similar to the behavior of -b where only build_id events are inserted when a dso is accessed in a sample. File size savings can be significant in system-wide mode, consider: $ perf record -g -a -o perf.data sleep 1 $ perf inject -B -i perf.data -o perf.new.data $ ls -al perf.data perf.new.data 5147049 perf.data 2248493 perf.new.data Give test coverage of the new option in pipe test. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Anne Macedo <[email protected]> Cc: Casey Chen <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sun Haiyong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-10perf inject: Add new mmap2-buildid-all optionIan Rogers1-0/+1
Add an option that allows all mmap or mmap2 events to be rewritten as mmap2 events with build IDs. This is similar to the existing -b/--build-ids and --buildid-all options except instead of adding a build_id event an existing mmap/mmap2 event is used as a template and a new mmap2 event synthesized from it. As mmap2 events are typical this avoids the insertion of build_id events. Add test coverage to the pipe test. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Anne Macedo <[email protected]> Cc: Casey Chen <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sun Haiyong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-04perf tests probe_vfs_getname.sh: Update to use 'perf check feature'Athira Rajeev3-4/+10
In probe_vfs_getname.sh, current we use "perf record --dry-run" to check for libtraceevent and skip the test if perf is not build with libtraceevent. Change the check to use "perf check feature" option Signed-off-by: Athira Rajeev <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-04perf tools test_task_analyzer.sh: Update to use 'perf check feature'Aditya Gupta1-2/+2
Currently we use output of 'perf version --build-options', to check whether perf was built with libtraceevent support. Instead, use 'perf check feature libtraceevent' to check for libtraceevent support. Reviewed-by: Athira Rajeev <[email protected]> Signed-off-by: Aditya Gupta <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-04perf parse-events: Add default_breakpoint_len helperIan Rogers4-4/+9
The default breakpoint length is "sizeof(long)" however this is incorrect on platforms like Aarch64 where sizeof(long) is 8 but the breakpoint length is 4. Add a helper function that can be used to determine the correct breakpoint length, in this change it just returns the existing default sizeof(long) value. Use the helper in the bp_account test so that, when modifying the event from a watchpoint to a breakpoint, the breakpoint length is appropriate for the architecture and not just sizeof(long). Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf test: Make watchpoint data 32-bits on i386Ian Rogers1-0/+5
i386 only supports watchpoints up to size 4, 8 bytes causes extra counts and test failures. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf test: Skip uprobe test if probe command isn't presentIan Rogers1-0/+7
The probe command is dependent on libelf. Skip the test if the required probe command isn't present. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-09-03perf report: Support LLVM for addr2line()Steinar H. Gunderson1-0/+2
In addition to the existing support for libbfd and calling out to an external addr2line command, add support for using libllvm directly. This is both faster than libbfd, and can be enabled in distro builds (the LLVM license has an explicit provision for GPLv2 compatibility). Thus, it is set as the primary choice if available. As an example, running 'perf report' on a medium-size profile with DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with libbfd, 153 seconds with external llvm-addr2line, and I got tired and aborted the test after waiting for 55 minutes with external bfd addr2line (which is the default for perf as compiled by distributions today). Evidently, for this case, the bfd addr2line process needs 18 seconds (on a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second timeout and gets killed during initialization, getting restarted anew every time. Having an in-process addr2line makes this much more robust. As future extensions, libllvm can be used in many other places where we currently use libbfd or other libraries: - Symbol enumeration (in particular, for PE binaries). - Demangling (including non-Itanium demangling, e.g. Microsoft or Rust). - Disassembling (perf annotate). However, these are much less pressing; most people don't profile PE binaries, and perf has non-bfd paths for ELF. The same with demangling; the default _cxa_demangle path works fine for most users, and while bfd objdump can be slow on large binaries, it is possible to use --objdump=llvm-objdump to get the speed benefits. (It appears LLVM-based demangling is very simple, should we want that.) Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not correctly detected using feature_check, and thus was not tested. Committer notes: Added the name and a __maybe_unused to address: 1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC) util/srcline.c: In function 'dso__free_a2l': util/srcline.c:184:20: error: parameter name omitted void dso__free_a2l(struct dso *) ^~~~~~~~~~~~ make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2 Signed-off-by: Steinar H. Gunderson <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Ian Rogers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-30perf test: Additional pipe tests with pipe output written to a fileIan Rogers1-0/+26
Additional pipe tests where piped files are written to disk. This means that spotting a file name of "-" isn't a sufficient "is pipe?" test. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf test: Add 'perf record cgroup' filtering testNamhyung Kim1-3/+36
$ sudo ./perf test filtering -vv 96: perf record sample filtering (by BPF) tests: --- start --- test child forked, pid 2966908 Checking BPF-filter privilege Basic bpf-filter test Basic bpf-filter test [Success] Failing bpf-filter test Failing bpf-filter test [Success] Group bpf-filter test Group bpf-filter test [Success] Multiple bpf-filter test Multiple bpf-filter test [Success] Cgroup bpf-filter test Cgroup bpf-filter test [Success] ---- end(0) ---- 96: perf record sample filtering (by BPF) tests : Ok Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf test trace_btf_enum: Fix shellcheck warningJames Clark1-0/+1
Shellcheck versions < v0.7.2 can't follow this path so add the helper to fix the following warning: In tests/shell/trace_btf_enum.sh line 13: . "$(dirname $0)"/lib/probe.sh ^--------------------------^ SC1090: Can't follow non-constant source. Use a directive to specify location. Fixes: d66763fed30f0bd8 ("perf test trace_btf_enum: Add regression test for the BTF augmentation of enums in 'perf trace'") Signed-off-by: James Clark <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Howard Chu <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite report: Add test case for perf reportVeronika Molnarova1-0/+23
Add a new 'perf report' test case that acts as an entry element in 'perf test list'. Runs multiple subtests from directory "base_report", which can be expanded without further editing. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite report: Add test for perf-report basic functionalityVeronika Molnarova4-0/+229
Test basic execution and some options of perf-report subcommand, like show-nr-samples, header, showcpuutilization, pid and symbol filtering. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite: Add common output checking helperVeronika Molnarova1-0/+51
As a form of validation, it is a common practice to check the outputs of commands whether they contain expected patterns or match a certain regular expression. This output checking helper is designed to allow checking stderr output of perf commands for unexpected messages, while ignoring messages that are known to be harmless, e.g.: "Lowering default frequency rate to \d+\." "\d+ out of order events recorded." etc. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite probe: Add test for line semanticsVeronika Molnarova1-0/+55
The perf-probe command uses a specific semantics to describe probes. Test some patterns that are known to be both valid and invalid if they are handled appropriately. This test is run as a part of perftool-testsuite_probe test case. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite probe: Add test for invalid optionsVeronika Molnarova1-0/+79
Test if various incompatible options are correctly handled-rejected. It is run as a part of perftool-testsuite_probe test case. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite probe: Add test for basic perf-probe optionsVeronika Molnarova1-0/+80
Test basic behavior of perf-probe subcommand. It is run as a part of perftool-testsuite_probe test case. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite probe: Add test for blacklisted kprobes handlingVeronika Molnarova1-0/+67
Test perf probe interface. Blacklisted functions should be rejected when there is an attempt to set a kprobe to them. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite: Fix shellcheck warningsVeronika Molnarova2-8/+9
Shellcheck is becoming a standard when building perf to prevent any unnecessary mistakes. Fix shellcheck warnings in perf testsuite. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf testsuite: Merge settings files for shell testsVeronika Molnarova4-51/+46
Merge perf testsuite setting files into common settings to reduce duplicates and prevent errors. Signed-off-by: Michael Petlan <[email protected]> Signed-off-by: Veronika Molnarova <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf tests shell: Skip base_* dirs in test script searchMichael Petlan1-0/+2
The test scripts in base_* directories currently have their own drivers that run them. Before this patch, the shell test-suite generator causes them to run twice. Fix that by skipping them in the generator. A cleaner solution (for future) will be to use the directory structure idea (introduced by Carsten Haitzler in 7391db645938 ("perf test: Refactor shell tests allowing subdirs")) to generate test entries with subtests, like: $ perf test list [...] 97: perf probe shell tests 97:1: perf probe basic functionality 97:2: perf probe tests with arguments 97:3: perf probe invalid options handling [...] There is already a lot of shell test scripts and many are about to come, so there is a need for some hierarchy. Signed-off-by: Michael Petlan <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Veronika Molnarova <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf test vfs_getname: Look for alternative line where to collect the pathnameArnaldo Carvalho de Melo1-1/+6
The getname_flags() routine changed recently and thus the place where we were getting the pathname is not probeable anymore, albeit still present, so use the next line for that, before: root@number:/home/acme/git/perf-tools-next# perf test vfs_getname 91: Add vfs_getname probe to get syscall args filenames : FAILED! 93: Use vfs_getname probe to get syscall args filenames : FAILED! 126: Check open filename arg using perf trace + vfs_getname : FAILED! root@number:/home/acme/git/perf-tools-next# Now tests 91 and 126 are passing, some more investigation is needed for test 93, that continues to fail. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-28perf test: Update sample filtering tests with multiple eventsNamhyung Kim1-0/+34
Add Multiple bpf-filter test for two or more events with filters. It uses task-clock and page-faults events with different filter expressions and check the perf script output $ sudo ./perf test filtering -vv 96: perf record sample filtering (by BPF) tests: --- start --- test child forked, pid 2804025 Checking BPF-filter privilege Basic bpf-filter test Basic bpf-filter test [Success] Failing bpf-filter test Error: task-clock event does not have PERF_SAMPLE_CPU Failing bpf-filter test [Success] Group bpf-filter test Error: task-clock event does not have PERF_SAMPLE_CPU Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE Group bpf-filter test [Success] Multiple bpf-filter test Multiple bpf-filter test [Success] ---- end(0) ---- 96: perf record sample filtering (by BPF) tests : Ok Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: KP Singh <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-26perf test: Support external tests for separate objdirAndi Kleen1-3/+32
Extend the searching for the test files so that it works when running perf from a separate objdir, and also when the perf executable is symlinked. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-19perf test: Add cgroup sampling testNamhyung Kim1-0/+23
Add it to the record.sh shell test to verify if it tracks cgroup information correctly. It records with --all-cgroups option can check if it has PERF_RECORD_CGROUP and the names are not "unknown". $ sudo ./perf test -vv 95 95: perf record tests: --- start --- test child forked, pid 2871922 169c90-169cd0 g test_loop perf does have symbol 'test_loop' Basic --per-thread mode test Basic --per-thread mode test [Success] Register capture test Register capture test [Success] Basic --system-wide mode test Basic --system-wide mode test [Success] Basic target workload test Basic target workload test [Success] Branch counter test branch counter feature not supported on all core PMUs (/sys/bus/event_source/devices/cpu) [Skipped] Cgroup sampling test Cgroup sampling test [Success] ---- end(0) ---- 95: perf record tests : Ok Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-19perf test: Expand pipe/inject testIan Rogers1-22/+79
Test recording of call-graphs and injecting --build-all. Add/expand trap handler. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Anne Macedo <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Casey Chen <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jann Horn <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Weilin Wang <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Yunseong Kim <[email protected]> Cc: Ze Gao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-19perf map: API clean upIan Rogers1-2/+2
map__init() is only used internally so make it static. Assume memory is zero initialized, which will better support adding fields to struct map in the future and was already the case for map__new2. To reduce complexity, change set_priv and set_erange_warned to not take a value to assign as they always assign true. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Anne Macedo <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Casey Chen <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jann Horn <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Weilin Wang <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Yunseong Kim <[email protected]> Cc: Ze Gao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-14perf test record.sh: Raise limit of open file descriptorsVeronika Molnarova1-1/+18
Subtest for system-wide record with '--threads=cpu' option fails due to a limit of open file descriptors on systems with 128 or more CPUs as the default limit is set to 1024. The number of open file descriptors should be slightly above nmb_events*nmb_cpus + nmb_cpus(for perf.data.n) + 4*nmb_cpus(for pipes), which equals 8*nmb_cpus. Therefore, temporarily raise the limit to 16*nmb_cpus for the test. Committer notes: Instead of disabling ShellCheck warnings all the uses of 'uname -n', i.e. those: In tests/shell/record.sh line 35: default_fd_limit=$(ulimit -Sn) ^-^ SC3045 (warning): In POSIX sh, ulimit -S is undefined. We can just switch from using '/bin/sh' to '/bin/bash' for this test, as bash _has_ 'ulimit -n', so ShellCheck will not emit that warning. There are dozens of 'perf test' shell tests that do just that, '/bin/bash' is a reasonable expectation for those tests. Signed-off-by: Veronika Molnarova <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Radostin Stoyanov <[email protected]> Link: https://lore.kernel.org/linux-perf-users/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-14perf test: Add new test cases for the branch counter featureKan Liang1-5/+12
Enhance the test case for the branch counter feature. Now, the test verifies: - The new filter can be successfully applied on the supported platforms. - The counter value can be outputted via the perf report -D - The counter value and the abbr name can be outputted via the perf script (New) Reviewed-by: Andi Kleen <[email protected]> Signed-off-by: Kan Liang <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-14perf test annotate: Dump trapping test in trap handlerIan Rogers1-1/+2
Help to better identify the location of test failures but dumping the failing test in the trap handler. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Richter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-13perf test: Add test for Intel TPEBS counting modeWeilin Wang1-0/+19
Intel TPEBS sampling mode is supported through perf record. The counting mode code uses perf record to capture retire_latency value and use it in metric calculation. This test checks the counting mode code on Intel platforms. Committer testing: root@x1:~# perf test tpebs 123: test Intel TPEBS counting mode : Ok root@x1:~# set -o vi root@x1:~# perf test tpebs 123: test Intel TPEBS counting mode : Ok root@x1:~# perf test -v tpebs 123: test Intel TPEBS counting mode : Ok root@x1:~# perf test -vvv tpebs 123: test Intel TPEBS counting mode: --- start --- test child forked, pid 16603 Testing without --record-tpebs Testing with --record-tpebs ---- end(0) ---- 123: test Intel TPEBS counting mode : Ok root@x1:~# Reviewed-by: Namhyung Kim <[email protected]> Signed-off-by: Weilin Wang <[email protected]> Acked-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Caleb Biggers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Perry Taylor <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Samantha Alt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-12perf test event_update: Ensure tools is initializedIan Rogers1-0/+1
Ensure tool is initialized to avoid lazy initialization pattern so that more uses of struct perf_tool can be made const. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Huacai Chen <[email protected]> Cc: Ilkka Koskinen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-12perf tool: Constify tool pointersIan Rogers6-13/+13
The tool pointer (to a struct largely of function pointers) is passed around but is unchanged except at initialization. Change parameter and variable types to be const to lower the possibilities of what could happen with a tool. Reviewed-by: Adrian Hunter <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Adrian Hunter <[email protected]> Tested-by: Leo Yan <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Huacai Chen <[email protected]> Cc: Ilkka Koskinen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-12perf tests pmu: Initialize all fields of test_pmu variableArnaldo Carvalho de Melo1-3/+3
Instead of explicitely initializing just the .name and .alias_name, use struct member named initialization of just the non-null -name field, the compiler will initialize all the other non-explicitely initialized fields to NULL. This makes the code more robust, avoiding the error recently fixed when the .alias_name was used and contained a random value. Reviewed-by: Veronika Molnarova <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Radostin Stoyanov <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-08perf test shell lbr: Support hybrid x86 systems tooArnaldo Carvalho de Melo1-1/+1
Running on a: root@x1:~# grep 'model name' -m1 /proc/cpuinfo model name : 13th Gen Intel(R) Core(TM) i7-1365U root@x1:~# It skips all the tests with: root@x1:~# perf test -vvvv LBR 97: perf record LBR tests: --- start --- test child forked, pid 2033388 Skip: only x86 CPUs support LBR ---- end(-2) ---- 97: perf record LBR tests : Skip root@x1:~# Because the test checks for the /sys/devices/cpu/caps/branches file, that isn't present as we have instead: root@x1:~# ls -la /sys/devices/cpu*/caps/branches -r--r--r--. 1 root root 4096 Aug 8 11:22 /sys/devices/cpu_atom/caps/branches -r--r--r--. 1 root root 4096 Aug 8 11:21 /sys/devices/cpu_core/caps/branches root@x1:~# If we check as well for one of those, /sys/devices/cpu_core/caps/branches, then we don't skip the tests and all are run on these x86 Intel Hybrid systems as well, passing all of them: root@x1:~# perf test -vvvv LBR 97: perf record LBR tests: --- start --- test child forked, pid 2034956 LBR callgraph [ perf record: Woken up 5 times to write data ] [ perf record: Captured and wrote 1.812 MB /tmp/__perf_test.perf.data.B2HvQ (8114 samples) ] LBR callgraph [Success] LBR any branch test [ perf record: Woken up 25 times to write data ] [ perf record: Captured and wrote 6.382 MB /tmp/__perf_test.perf.data.B2HvQ (8071 samples) ] LBR any branch test: 8071 samples LBR any branch test [Success] LBR any call test [ perf record: Woken up 23 times to write data ] [ perf record: Captured and wrote 6.208 MB /tmp/__perf_test.perf.data.B2HvQ (8092 samples) ] LBR any call test: 8092 samples LBR any call test [Success] LBR any ret test [ perf record: Woken up 24 times to write data ] [ perf record: Captured and wrote 6.396 MB /tmp/__perf_test.perf.data.B2HvQ (8093 samples) ] LBR any ret test: 8093 samples LBR any ret test [Success] LBR any indirect call test [ perf record: Woken up 25 times to write data ] [ perf record: Captured and wrote 6.344 MB /tmp/__perf_test.perf.data.B2HvQ (8067 samples) ] LBR any indirect call test: 8067 samples LBR any indirect call test [Success] LBR any indirect jump test [ perf record: Woken up 12 times to write data ] [ perf record: Captured and wrote 3.073 MB /tmp/__perf_test.perf.data.B2HvQ (8061 samples) ] LBR any indirect jump test: 8061 samples LBR any indirect jump test [Success] LBR direct calls test [ perf record: Woken up 25 times to write data ] [ perf record: Captured and wrote 6.380 MB /tmp/__perf_test.perf.data.B2HvQ (8076 samples) ] LBR direct calls test: 8076 samples LBR direct calls test [Success] LBR any indirect user call test [ perf record: Woken up 5 times to write data ] [ perf record: Captured and wrote 1.597 MB /tmp/__perf_test.perf.data.B2HvQ (8079 samples) ] LBR any indirect user call test: 8079 samples LBR any indirect user call test [Success] LBR system wide any branch test [ perf record: Woken up 26 times to write data ] [ perf record: Captured and wrote 9.088 MB /tmp/__perf_test.perf.data.B2HvQ (9209 samples) ] LBR system wide any branch test: 9209 samples LBR system wide any branch test [Success] LBR system wide any call test [ perf record: Woken up 25 times to write data ] [ perf record: Captured and wrote 8.945 MB /tmp/__perf_test.perf.data.B2HvQ (9333 samples) ] LBR system wide any call test: 9333 samples LBR system wide any call test [Success] LBR parallel any branch test LBR parallel any call test LBR parallel any ret test LBR parallel any indirect call test LBR parallel any indirect jump test LBR parallel direct calls test LBR parallel system wide any branch test LBR parallel any indirect user call test LBR parallel system wide any call test [ perf record: Woken up 9 times to write data ] [ perf record: Woken up 51 times to write data ] [ perf record: Woken up 1 times to write data ] [ perf record: Woken up 5 times to write data ] [ perf record: Woken up 559 times to write data ] [ perf record: Woken up 14 times to write data ] [ perf record: Woken up 17 times to write data ] [ perf record: Woken up 1 times to write data ] [ perf record: Woken up 11 times to write data ] [ perf record: Captured and wrote 0.150 MB /tmp/__perf_test.perf.data.lANpR (1909 samples) ] [ perf record: Captured and wrote 2.371 MB /tmp/__perf_test.perf.data.Olum8 (3033 samples) ] [ perf record: Captured and wrote 1.230 MB /tmp/__perf_test.perf.data.njfJ8 (1742 samples) ] [ perf record: Captured and wrote 5.554 MB /tmp/__perf_test.perf.data.4ZTrj (29662 samples) ] [ perf record: Captured and wrote 19.906 MB /tmp/__perf_test.perf.data.dlGQt (29576 samples) ] [ perf record: Captured and wrote 0.289 MB /tmp/__perf_test.perf.data.CAT7y (4311 samples) ] [ perf record: Captured and wrote 3.129 MB /tmp/__perf_test.perf.data.diuKG (3971 samples) ] LBR parallel any indirect user call test: 1909 samples [ perf record: Captured and wrote 4.858 MB /tmp/__perf_test.perf.data.sVjtN (6130 samples) ] LBR parallel any indirect user call test [Success] [ perf record: Captured and wrote 3.669 MB /tmp/__perf_test.perf.data.AJtNI (4827 samples) ] LBR parallel any indirect jump test: 4311 samples LBR parallel any indirect jump test [Success] LBR parallel direct calls test: 3033 samples LBR parallel direct calls test [Success] LBR parallel any indirect call test: 1742 samples LBR parallel any indirect call test [Success] LBR parallel any call test: 4827 samples LBR parallel any call test [Success] LBR parallel any branch test: 6130 samples LBR parallel any branch test [Success] LBR parallel system wide any branch test: 29662 samples LBR parallel any ret test: 3971 samples LBR parallel any ret test [Success] LBR parallel system wide any branch test [Success] LBR parallel system wide any call test: 29576 samples LBR parallel system wide any call test [Success] ---- end(0) ---- 97: perf record LBR tests : Ok root@x1:~# Reviewed-by: Kan Liang <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/ZrTXftup0H46R8WK@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-08perf test: Add set of perf record LBR testsIan Rogers1-0/+161
Adds coverage for LBR operations and LBR callgraph. Reviewed-by: Kan Liang <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Anne Macedo <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-08perf test pmu: Set uninitialized PMU alias to nullVeronika Molnarova1-1/+3
Commit 3e0bf9fde2984469 ("perf pmu: Restore full PMU name wildcard support") adds a test case "PMU cmdline match" that covers PMU name wildcard support provided by function perf_pmu__match(). The test works with a wide range of supported combinations of PMU name matching but omits the case that if the perf_pmu__match() cannot match the PMU name to the wildcard, it tries to match its alias. However, this variable is not set up, causing the test case to fail when run with subprocesses or to segfault if run as a single process. ./perf test -vv 9 9: Sysfs PMU tests : 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok 9.6: PMU cmdline match : FAILED! ./perf test -F 9 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok Segmentation fault (core dumped) Initialize the PMU alias to null for all tests of perf_pmu__match() as this functionality is not being tested and the alias matching works exactly the same as the matching of the PMU name. ./perf test -F 9 9.1: Parsing with PMU format directory : Ok 9.2: Parsing with PMU event : Ok 9.3: PMU event names : Ok 9.4: PMU name combining : Ok 9.5: PMU name comparison : Ok 9.6: PMU cmdline match : Ok Fixes: 3e0bf9fde2984469 ("perf pmu: Restore full PMU name wildcard support") Signed-off-by: Veronika Molnarova <[email protected]> Cc: James Clark <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Radostin Stoyanov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-08perf tests ftrace: Add pattern check for time, countArnaldo Carvalho de Melo1-0/+5
In 'perf ftrace profile sleep 0.1' we know that we'll have an specific kernel function that will take a bit more than 0.1 seconds and will take place just one time, so we can add a check for that so that we validate more than just the presence of some functions in the profile. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/lkml/ZrTBo7KACZeuCyLj@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-08perf test: Add a new shell test for perf ftraceNamhyung Kim1-0/+84
$ sudo ./perf test ftrace -vv 86: perf ftrace tests: --- start --- test child forked, pid 1772223 perf ftrace list test syscalls for sleep: __x64_sys_nanosleep __ia32_sys_nanosleep __x64_sys_clock_nanosleep __ia32_sys_clock_nanosleep perf ftrace list test [Success] perf ftrace trace test # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 0) | __x64_sys_clock_nanosleep() { 0) | common_nsleep() { 0) | hrtimer_nanosleep() { 0) | do_nanosleep() { perf ftrace trace test [Success] perf ftrace latency test target function: __x64_sys_clock_nanosleep # DURATION | COUNT | GRAPH | 32 - 64 ms | 1 | ############################################## | perf ftrace latency test [Success] perf ftrace profile test # Total (us) Avg (us) Max (us) Count Function 100136.400 100136.400 100136.400 1 __x64_sys_clock_nanosleep 100135.200 100135.200 100135.200 1 common_nsleep 100134.700 100134.700 100134.700 1 hrtimer_nanosleep 100133.700 100133.700 100133.700 1 do_nanosleep 100130.600 100130.600 100130.600 1 schedule 166.868 55.623 80.299 3 scheduler_tick 5.926 5.926 5.926 1 native_smp_send_reschedule 301.941 301.941 301.941 1 __x64_sys_execve 295.786 295.786 295.786 1 do_execveat_common.isra.0 71.397 35.699 46.403 2 bprm_execve 2.519 1.260 1.547 2 sched_mm_cid_before_execve 1.098 0.549 0.686 2 sched_mm_cid_after_execve perf ftrace profile test [Success] ---- end(0) ---- 86: perf ftrace tests : Ok Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-06perf test: Add build test for JEVENTS_ARCH=allIan Rogers1-0/+2
Building with JEVENTS_ARCH=all builds all CPU types and allows things like assertions to check the validity of the input JSON. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Albert Ou <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Atish Patra <[email protected]> Cc: Changbin Du <[email protected]> Cc: Charles Ci-Jyun Wu <[email protected]> Cc: Eric Lin <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Guilherme Amadio <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Inochi Amaoto <[email protected]> Cc: James Clark <[email protected]> Cc: Ji Sheng Teoh <[email protected]> Cc: Jing Zhang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Locus Wei-Han Chen <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Samuel Holland <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Will Deacon <[email protected]> Cc: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-01perf test: Update sample filtering testNamhyung Kim1-6/+7
Now it can run the BPF filtering test with normal user if the BPF objects are pinned by 'sudo perf record --setup-filter pin'. Let's update the test case to verify the behavior. It'll skip the test if the filter check is failed from a normal user, but it shows a message how to set up the filters. First, run the test as a normal user and it fails. $ perf test -vv filtering 95: perf record sample filtering (by BPF) tests: --- start --- test child forked, pid 425677 Checking BPF-filter privilege try 'sudo perf record --setup-filter pin' first. <<<--- here bpf-filter test [Skipped permission] ---- end(-2) ---- 95: perf record sample filtering (by BPF) tests : Skip According to the message, run the perf record command to pin the BPF objects. $ sudo perf record --setup-filter pin And re-run the test as a normal user. $ perf test -vv filtering 95: perf record sample filtering (by BPF) tests: --- start --- test child forked, pid 424486 Checking BPF-filter privilege Basic bpf-filter test Basic bpf-filter test [Success] Failing bpf-filter test Error: task-clock event does not have PERF_SAMPLE_CPU Failing bpf-filter test [Success] Group bpf-filter test Error: task-clock event does not have PERF_SAMPLE_CPU Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE Group bpf-filter test [Success] ---- end(0) ---- 95: perf record sample filtering (by BPF) tests : Ok Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: KP Singh <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-07-31perf test: make metric validation test return early when there is no metric ↵Weilin Wang1-2/+8
supported on the test system Add a check to return the metric validation test early when perf list metric does not output any metric. This would happen when NO_JEVENTS=1 is set or in a system that there is no metric supported. Signed-off-by: Weilin Wang <[email protected]> Tested-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Caleb Biggers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Perry Taylor <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Samantha Alt <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-07-31perf test pmu: Remove unused test_pmusDr. David Alan Gilbert1-3/+0
Commit aa1551f299ba ("perf test pmu: Refactor format test and exposed test APIs") added the 'test_pmus' list, but didn't use it. (It seems to put them on the other_pmus list?) Remove it. Fixes: aa1551f299ba414c ("perf test pmu: Refactor format test and exposed test APIs") Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: Dr. David Alan Gilbert <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Kan Liang <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-07-31perf test: Avoid python leak sanitizer test failuresIan Rogers2-0/+6
Leak sanitizer will report memory leaks from python and the leak sanitizer output causes tests to fail. For example: ``` $ perf test 98 -v 98: perf script tests: --- start --- test child forked, pid 1272962 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.046 MB /tmp/perf-test-script.x0EktdCel8/perf.data (8 samples) ] call_path_table((1, 0, 0, 0) call_path_table((2, 1, 0, 140339508617447) call_path_table((3, 2, 2, 0) call_path_table((4, 3, 3, 0) call_path_table((5, 4, 4, 0) call_path_table((6, 5, 5, 0) call_path_table((7, 6, 6, 0) call_path_table((8, 7, 7, 0) call_path_table((9, 8, 8, 0) call_path_table((10, 9, 9, 0) call_path_table((11, 10, 10, 0) call_path_table((12, 11, 11, 0) call_path_table((13, 12, 1, 0) sample_table((1, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954119000, -1, 0, 0, 0, 0, 1, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((2, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954137053, -1, 0, 0, 0, 0, 1, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((3, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954140089, -1, 0, 0, 0, 0, 9, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((4, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954142376, -1, 0, 0, 0, 0, 155, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((5, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954144045, -1, 0, 0, 0, 0, 2493, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((6, 1, 1, 1, 1, 1, 12, 77, -2046828595, 588306954145722, -1, 0, 0, 0, 0, 47555, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) call_path_table((14, 9, 14, 0) call_path_table((15, 14, 15, 0) call_path_table((16, 15, 0, -1040969624) call_path_table((17, 16, 16, 0) call_path_table((18, 17, 17, 0) call_path_table((19, 18, 18, 0) call_path_table((20, 19, 19, 0) call_path_table((21, 20, 13, 0) sample_table((7, 1, 1, 1, 2, 1, 13, 46, -2053700898, 588306954157436, -1, 0, 0, 0, 0, 964078, 0, 0, 128933429281, 0, 0, 21, 0, 0, 0, -1, -1)) call_path_table((22, 1, 21, 0) call_path_table((23, 22, 22, 0) call_path_table((24, 23, 23, 0) call_path_table((25, 24, 24, 0) call_path_table((26, 25, 25, 0) call_path_table((27, 26, 26, 0) call_path_table((28, 27, 27, 0) call_path_table((29, 28, 28, 0) call_path_table((30, 29, 29, 0) call_path_table((31, 30, 30, 0) call_path_table((32, 31, 31, 0) call_path_table((33, 32, 32, 0) call_path_table((34, 33, 33, 0) call_path_table((35, 34, 20, 0) sample_table((8, 1, 1, 1, 2, 1, 20, 49, -2046878127, 588306954378624, -1, 0, 0, 0, 0, 2534317, 0, 0, 128933429281, 0, 0, 35, 0, 0, 0, -1, -1)) ================================================================= ==1272975==ERROR: LeakSanitizer: detected memory leaks Direct leak of 13628 byte(s) in 6 object(s) allocated from: #0 0x56354f60c092 in malloc (/tmp/perf/perf+0x29c092) #1 0x7ff25c7d02e7 in _PyObject_Malloc /build/python3.11/../Objects/obmalloc.c:2003:11 #2 0x7ff25c7d02e7 in _PyObject_Malloc /build/python3.11/../Objects/obmalloc.c:1996:1 SUMMARY: AddressSanitizer: 13628 byte(s) leaked in 6 allocation(s). --- Cleaning up --- ---- end(-1) ---- 98: perf script tests : FAILED! ``` Disable leak sanitizer when running specific perf+python tests to avoid this. This causes the tests to pass when run with leak sanitizer. Reviewed-by: Aditya Gupta <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Richter <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-07-31perf test trace_btf_enum: Add regression test for the BTF augmentation of ↵Howard Chu1-0/+61
enums in 'perf trace' Trace landlock_add_rule syscall to see if the output is desirable. Trace the non-syscall tracepoint 'timer:hrtimer_init' and 'timer:hrtimer_start', see if the 'mode' argument is augmented, the 'mode' enum argument has the prefix of 'HRTIMER_MODE_' in its name. Committer testing: root@x1:~# perf test enum 124: perf trace enum augmentation tests : Ok root@x1:~# perf test -v enum 124: perf trace enum augmentation tests : Ok root@x1:~# perf trace -e landlock_add_rule perf test -v enum 0.000 ( 0.010 ms): perf/749827 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd324171d4, flags: 45) = -1 EINVAL (Invalid argument) 0.012 ( 0.002 ms): perf/749827 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd324171e0, flags: 45) = -1 EINVAL (Invalid argument) 457.821 ( 0.007 ms): perf/749830 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd4acd31e4, flags: 45) = -1 EINVAL (Invalid argument) 457.832 ( 0.003 ms): perf/749830 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd4acd31f0, flags: 45) = -1 EINVAL (Invalid argument) 124: perf trace enum augmentation tests : Ok root@x1:~# Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Howard Chu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-07-31perf test: Add landlock workloadHoward Chu4-0/+69
We'll use it to add a regression test for the BTF augmentation of enum arguments for tracepoints in 'perf trace': root@x1:~# perf trace -e landlock_add_rule perf test -w landlock 0.000 ( 0.009 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd8e258594, flags: 45) = -1 EINVAL (Invalid argument) 0.011 ( 0.002 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd8e2585a0, flags: 45) = -1 EINVAL (Invalid argument) root@x1:~# Committer notes: It was agreed on the discussion (see Link below) to shorten then name of the workload from 'landlock_add_rule' to 'landlock', and I moved it to a separate patch. Also, to address a build failure from Namhyung, I stopped loading linux/landlock.h and instead added the used defines, enums and types to make this build in older systems. All we want is to emit the syscall and intercept it. Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Howard Chu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/CAH0uvohaypdTV6Z7O5QSK+va_qnhZ6BP6oSJ89s1c1E0CjgxDA@mail.gmail.com Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.