aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
AgeCommit message (Collapse)AuthorFilesLines
2024-09-06wifi: mt76: partially move channel change code to coreFelix Fietkau1-1/+1
This allows the core code to change the channel. Code deduplication and preparation for adding scanning code to the core. Link: https://patch.msgid.link/20240828063422.44813-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-06-20wifi: mt76: un-embedd netdev from mt76_devBreno Leitao1-1/+1
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_devices from struct mt76_dev by converting them into pointers, and allocating them dynamically. Use the leverage alloc_netdev_dummy() to allocate the net_device object at mt76_dma_init(). The free of the device occurs at mt76_dma_cleanup(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240619105311.3144908-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-07wifi: mt76: introduce wed pointer in mt76_queueLorenzo Bianconi1-2/+3
Introduce mtk_wed_device pointer in mt76_queue structure in order to configure WED chip. Get rid of dev parameter in Q_READ and Q_WRITE macros. Introduce wed parameter to the following routine signatures: - mt76_init_queue - mt76_init_tx_queue This is a preliminary patch to introduce WED support for mt7996 since mt7996 runs two separate WED chips. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: use atomic iface iteration for pre-TBTT workJohannes Berg1-2/+9
In addition to the previous series I posted, over time I'd also like to get rid of the iflist_mtx in mac80211. That isn't easy now since lots of places use iteration and would have to be audited, but even a cursory look suggests that mt76 might be more problematic than most since holding the wiphy lock for the latency-sensitive pre-TBTT work could be an issue. Convert the pre-TBTT work to use atomic iteration and then sending the device commands outside of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: pass original queue id from __mt76_tx_queue_skb to the driverFelix Fietkau1-1/+2
MT7615 and newer map multiple software tx queues to the hardware id Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add Wireless Ethernet Dispatch supportFelix Fietkau1-2/+2
This is used to support hardware flow offloading from Ethernet to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-06mt76: switch to netif_napi_add_tx()Jakub Kicinski1-2/+2
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504163316.549648-3-kuba@kernel.org
2022-02-03mt76: mt76x02: improve tx hang detectionFelix Fietkau1-19/+11
Instead of checking if any queue has not made progress since the last run, only trigger hang detection if one of the queues has not made any progress in 10 subsequent runs. This should reduce false positive firmware restarts Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: remove mt76_wcid pointer from mt76_tx_status_check signatureLorenzo Bianconi1-1/+1
Remove mt76_wcid pointer from mt76_tx_status_check signature since it is always set to NULL Tested-by: mrkiko.rs@gmail.com Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: move spin_lock_bh to spin_lock in taskletXingbang Liu1-2/+2
as you are already in a tasklet, it is unnecessary to call spin_lock_bh. Signed-off-by: Xingbang Liu <liu.airalert@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: disable BH around napi_schedule() callsFelix Fietkau1-2/+4
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: dma: add the capability to define a custom rx napi poll routineLorenzo Bianconi1-1/+1
Add the capability to define a custom rx napi callback for each driver. This is a preliminary patch to properly support runtime-pm on rx side Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: flush tx status queue on DMA resetFelix Fietkau1-0/+2
After DMA reset, tx status information for queued frames will never arrive. Flush the queue to free skbs immediately instead of waiting for a timeout Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: use threaded NAPIFelix Fietkau1-1/+1
With threaded NAPI, the rx handler function is no longer bound to the CPU that fired the interrupt, which significantly helps to spread the workload over multiple CPUs, especially when multiple devices are using threaded NAPI at the same time. Exclude the tx handler from threaded NAPI by using a separate dummy netdev. The work is small and short-lived enough that it makes more sense to run it in softirq instead of creating a dedicated thread Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-27mt76: move vif_mask back from mt76_phy to mt76_devFelix Fietkau1-1/+1
Since it is global for all drivers, it belongs to the main device Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move tx hw data queues in mt76_phyLorenzo Bianconi1-8/+7
Move hw data queues in mt76_phy from mt76_dev since mt7915 supports per phy hw queues in dbdc mode Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mcu queues to mt76_dev q_mcu arrayLorenzo Bianconi1-23/+20
Move mcu queue to a dedicated array q_mcu in mt76_dev structure. This is a preliminary patch to move data queues in mt76_phy and properly support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: introduce mt76_init_mcu_queue utility routineLorenzo Bianconi1-1/+1
Introduce mt76_init_mcu_queue utility routine in order to allocate dedicate q_mcu pointers for mcu hw queues. This is a preliminary patch to move data queues in mt76_phy and add dbdc support to mt7915 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rely on mt76_queue in tx_queue_skb signatureLorenzo Bianconi1-5/+6
Rely on mt76_queue instead of qid in tx_queue_skb signature. This is a preliminary patch to move data queues in mt76_phy and add dbdc support to mt7915 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: dma: rely on mt76_queue in mt76_dma_tx_cleanup signatureLorenzo Bianconi1-3/+3
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mt76_init_tx_queue in common codeLorenzo Bianconi1-8/+2
Move mt76_init_tx_queue in mac80211.c since it is shared by all drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04wireless: mt76: convert tasklets to use new tasklet_setup() APIAllen Pais1-4/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: convert from tx tasklet to tx worker threadFelix Fietkau1-14/+8
This improves performance by allowing the scheduler to move the tx scheduling work to idle CPUs. Since tx scheduling work is very latency sensitive and kept short via AQL, sched_set_fifo_low is used to keep worker priority above normal tasks Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76x02: tune tx ring sizeFelix Fietkau1-2/+2
Increase data queue size to improve performance. Reduce PS/mgmt queue size Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove struct mt76_sw_queueFelix Fietkau1-10/+8
All members except for the struct mt76_queue pointer have been removed Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove swq from struct mt76_sw_queueFelix Fietkau1-1/+0
Since txq selection was moved to mac80211, it is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76x02: clean up and fix interrupt masking in the irq handlerFelix Fietkau1-14/+11
Only clear unmasked interrupts. If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Disable interrupts in one call before scheduling Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo1-2/+3
mt76 driver had major conflicts within mt7615 directory. To make it easier for every merge wireless-drivers to wireless-drivers-next and solve those conflicts.
2020-07-21mt76: vif_mask to struct mt76_phyFelix Fietkau1-1/+1
All drivers use this in pretty much the same way. Moving it to core helps with some checks for the upcoming testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-23mt76: mt76x02: do not access uninitialized NAPI structsFelix Fietkau1-2/+3
Fixes a crash on MMIO devices when running into the watchdog reset Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200615181341.81871-1-nbd@nbd.name
2020-05-28mt76: only iterate over initialized rx queuesFelix Fietkau1-1/+2
Fixes the following reported crash: [ 2.361127] BUG: spinlock bad magic on CPU#0, modprobe/456 [ 2.361583] lock: 0xffffa1287525b3b8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 2.362250] CPU: 0 PID: 456 Comm: modprobe Not tainted 4.14.177 #5 [ 2.362751] Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.75.0 06/17/2019 [ 2.363343] Call Trace: [ 2.363552] dump_stack+0x97/0xdb [ 2.363826] ? spin_bug+0xa6/0xb3 [ 2.364096] do_raw_spin_lock+0x6a/0x9a [ 2.364417] mt76_dma_rx_fill+0x44/0x1de [mt76] [ 2.364787] ? mt76_dma_kick_queue+0x18/0x18 [mt76] [ 2.365184] mt76_dma_init+0x53/0x85 [mt76] [ 2.365532] mt7615_dma_init+0x3d7/0x546 [mt7615e] [ 2.365928] mt7615_register_device+0xe6/0x1a0 [mt7615e] [ 2.366364] mt7615_mmio_probe+0x14b/0x171 [mt7615e] [ 2.366771] mt7615_pci_probe+0x118/0x13b [mt7615e] [ 2.367169] pci_device_probe+0xaf/0x13d [ 2.367491] driver_probe_device+0x284/0x2ca [ 2.367840] __driver_attach+0x7a/0x9e [ 2.368146] ? driver_attach+0x1f/0x1f [ 2.368451] bus_for_each_dev+0xa0/0xdb [ 2.368765] bus_add_driver+0x132/0x204 [ 2.369078] driver_register+0x8e/0xcd [ 2.369384] do_one_initcall+0x160/0x257 [ 2.369706] ? 0xffffffffc0240000 [ 2.369980] do_init_module+0x60/0x1bb [ 2.370286] load_module+0x18c2/0x1a2b [ 2.370596] ? kernel_read_file+0x141/0x1b9 [ 2.370937] ? kernel_read_file_from_fd+0x46/0x71 [ 2.371320] SyS_finit_module+0xcc/0xf0 [ 2.371636] do_syscall_64+0x6b/0xf7 [ 2.371930] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 2.372344] RIP: 0033:0x7da218ae4199 [ 2.372637] RSP: 002b:00007fffd0608398 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.373252] RAX: ffffffffffffffda RBX: 00005a705449df90 RCX: 00007da218ae4199 [ 2.373833] RDX: 0000000000000000 RSI: 00005a7052e73bd8 RDI: 0000000000000006 [ 2.374411] RBP: 00007fffd06083e0 R08: 0000000000000000 R09: 00005a705449d540 [ 2.374989] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000 [ 2.375569] R13: 00005a705449def0 R14: 00005a7052e73bd8 R15: 0000000000000000 Reported-by: Sean Wang <sean.wang@mediatek.com> Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: fix per-driver wcid range checks after wcid array size bumpFelix Fietkau1-1/+1
All drivers before MT7915 have a limit of 128 WCID entries. Stop relying on ARRAY_SIZE(dev->mt76.wcid), since it no longer reflects that limit. Fixes: 49e649c3e0a6 ("mt76: adjust wcid size to support new 802.11ax generation") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02: fix handling MCU timeouts during hw restartFelix Fietkau1-0/+16
If a MCU timeout occurs before a hw restart completes, another hw restart is scheduled, and the station state gets corrupted. To speed up dealing with that, do not issue any MCU commands after the first timeout, and defer handling timeouts until the reset has completed. Also ignore errors in MCU commands during start/config to avoid making user space fail on this condition. If it happens, another restart is scheduled quickly, and that usually recovers the hardware properly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-03-17mt76: mt76x02: reset MCU timeout counter earlier in watchdog resetFelix Fietkau1-4/+1
Ensure that MCU commands issued right after hardware reset are not dropped and treated as failed. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: Introduce mt76_mcu data structureLorenzo Bianconi1-2/+2
Introduce mt76_mcu data structure to contain common fields between mt76u_mcu and mt76e_mcu. Initialize mcu common fields in mt76_alloc_device(). Rely on mt76_mcu in mt76_mcu_rx_event and in mt76_mcu_get_response in order to reuse them in usb code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: avoid extra RCU synchronization on station removalFelix Fietkau1-0/+2
Use sta_pre_rcu_remove callback to clear wcid pointer earlier Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move dev_irq tracepoint in mt76 moduleLorenzo Bianconi1-2/+2
Move dev_irq tracepoint in common code in order to be reused by mt7603 and mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x02: split beaconingMarkus Theil1-0/+7
Sending beacons to the hardware always happens in batches. In order to speed up beacon processing on usb devices, this patch splits out common code an calls it only once. Beacons are sequentially written into the beacon memory area, by tracking its usage with the dev->beacon_data_count. For MBSS support and buffered traffic dev->beacon_data_count is used to create the bypass mask. The code is also adapted for the mmio part of the driver, but should not have any performance implication there. MBSS tests were performed with AVM AC860 USB NIC with temporary support for 5 BSS'. Different combinations of active vifs were created and brought up. Afterwards connection and data transfer was tested for the announced BSS'. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move state from struct mt76_dev to mt76_phyFelix Fietkau1-4/+4
Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: keep a set of software tx queues per phyFelix Fietkau1-1/+1
Allows tracking tx scheduling separately per phy Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add support for an extra wiphy in the main tx pathFelix Fietkau1-2/+2
This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_startLorenzo Bianconi1-0/+1
Move mt76x02_mac_reset_counters in mt76x02_mac_start and get rid of mt76x2_mac_start since it is just a wrapper for mt76x02_mac_start Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: switch to SPDX tag instead of verbose boilerplate textRyder Lee1-12/+1
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: fix some checkpatch warningsRyder Lee1-5/+6
This fixes the following checkpatch warnings: ERROR: code indent should use tabs where possible CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Avoid precedence issues in macro WARNING: Statements should start on a tabstop WARNING: Unnecessary space before function pointer arguments Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: move netif_napi_del in mt76_dma_cleanupLorenzo Bianconi1-1/+0
Move netif_napi_del in mt76_dma_cleanup routine since it is done by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: move tx_napi in mt76_devLorenzo Bianconi1-9/+10
Move tx_napi in mt76_dev data structure in order to implement concurrency between tx scheduling and tx cleanup in mt7603 and mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: do not enable/disable pre_tbtt_tasklet in scan_start/scan_completeLorenzo Bianconi1-0/+3
Do not enable/disable pre_tbtt_tasklet tasklet in mt76x02_sw_scan/mt76x02_sw_scan_complete since it is already done setting the operating channel. Do run tbtt_tasklet while the device is offchannel Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move pre_tbtt_tasklet in mt76_devLorenzo Bianconi1-6/+6
Move pre_tbtt_tasklet tasklet in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move beacon_mask in mt76_devLorenzo Bianconi1-3/+3
Move beacon_mask in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mt76x02: mt76x02_poll_tx() can be statickbuild test robot1-1/+1
Fixes: ec7d2d74760a ("mt76: mt76x02: use napi polling for tx cleanup") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Powered by cgit, Gruvboxed by Blaster4385.