aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)AuthorFilesLines
2024-10-25Merge tag 'wireless-2024-10-21' of ↵David S. Miller1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless wireless fixes for v6.12-rc5 The first set of wireless fixes for v6.12. We have been busy and have not been able to send this earlier, so there are more fixes than usual. The fixes are all over, both in stack and in drivers, but nothing special really standing out.
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro5-5/+5
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-18wifi: mt76: do not increase mcu skb refcount if retry is not supportedFelix Fietkau1-2/+5
If mcu_skb_prepare_msg is not implemented, incrementing skb refcount does not work for mcu message retry. In some cases (e.g. on SDIO), shared skbs can trigger a BUG_ON, crashing the system. Fix this by only incrementing refcount if retry is actually supported. Fixes: 3688c18b65ae ("wifi: mt76: mt7915: retry mcu messages") Closes: https://lore.kernel.org/r/d907b13a-f8be-4cb8-a0bb-560a21278041@notapiano/ Reported-by: Nícolas F. R. A. Prado <[email protected]> #KernelCI Tested-by: Alper Nebi Yasak <[email protected]> Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-09-09Merge tag 'mt76-for-kvalo-2024-09-06' of https://github.com/nbd168/wirelessKalle Valo62-406/+622
mt76 patches for 6.12 - fixes - mt7915 .sta_state support - mt7915 hardware restart improvements
2024-09-06wifi: mt76: mt7925: replace chan config with extend txpower config for clcMing Yen Hsieh1-1/+1
Since MT792x_CLC_CHAN is currently not in use, we have added an extension for setting txpower to replace it. Signed-off-by: Ming Yen Hsieh <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clcMing Yen Hsieh1-0/+3
Due to the lack of checks on the clc array, if the firmware supports more clc configuration, it will cause illegal memory access. Cc: [email protected] Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7615: check devm_kasprintf() returned valueMa Ke1-0/+3
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. Cc: [email protected] Fixes: 0bb4e9187ea4 ("mt76: mt7615: fix hwmon temp sensor mem use-after-free") Signed-off-by: Ma Ke <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7925: convert comma to semicolonChen Ni1-6/+6
Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Signed-off-by: Chen Ni <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7925: fix a potential association failure upon resumingMichael Lo3-0/+18
In multi-channel scenarios, the granted channel must be aborted before suspending. Otherwise, the firmware will be put into a wrong state, resulting in an association failure after resuming. With this patch, the granted channel will be aborted before suspending if necessary. Cc: [email protected] Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <[email protected]> Signed-off-by: Ming Yen Hsieh <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warningsGustavo A. R. Silva2-14/+19
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. So, in order to avoid ending up with a flexible-array member in the middle of multiple other structs, we use the `struct_group_tagged()` helper to create a new tagged `struct mt76_connac2_mcu_rxd_hdr`. This structure groups together all the members of the flexible `struct mt76_connac2_mcu_rxd` except the flexible array. As a result, the array is effectively separated from the rest of the members without modifying the memory layout of the flexible structure. We then change the type of the middle struct members currently causing trouble from `struct mt76_connac2_mcu_rxd` to `struct mt76_connac2_mcu_rxd_hdr`. We also want to ensure that when new members need to be added to the flexible structure, they are always included within the newly created tagged struct. For this, we use `static_assert()`. This ensures that the memory layout for both the flexible structure and the new tagged struct is the same after any changes. This approach avoids having to implement `struct mt76_connac2_mcu_rxd_hdr` as a completely separate structure, thus preventing having to maintain two independent but basically identical structures, closing the door to potential bugs in the future. So, with these changes, fix the following warnings: drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:32:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:40:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:49:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:58:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://patch.msgid.link/Zr5KsZugaEXrApQJ@elsanto Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7921: Check devm_kasprintf() returned valueMa Ke1-0/+2
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. Cc: [email protected] Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor") Signed-off-by: Ma Ke <[email protected]> Reviwed-by: Matthias Brugger <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: check devm_kasprintf() returned valueMa Ke1-0/+2
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. Cc: [email protected] Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor") Signed-off-by: Ma Ke <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: avoid long MCU command timeouts during SERFelix Fietkau1-0/+5
Immediately abort MCU commands when firmware requests DMA restart. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7996: fix uninitialized TLV dataFelix Fietkau1-1/+1
Use skb_put_zero instead of skb_put Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: always query station rx rate from firmwareFelix Fietkau1-2/+1
When offloading is enabled, the software rx path may not have the latest rate information. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: fix rx filter setting for bfee functionalityHoward Hsu1-2/+1
Fix rx filter setting to prevent dropping NDPA frames. Without this change, bfee functionality may behave abnormally. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Howard Hsu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: shrink mt76_queue_bufFelix Fietkau1-2/+2
Reuse one bit from the length field for skip_unmap Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: improve hardware restart reliabilityFelix Fietkau3-12/+27
- use reconfig_complete to restart mac_work / queues - reset full wtbl after firmware init - clear wcid and vif mask to avoid leak - fix sta poll list corruption Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: connac: move mt7615_mcu_del_wtbl_all to connacFelix Fietkau5-12/+13
Preparation for reusing it in mt7915 Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: hold dev->mt76.mutex while disabling tx workerFelix Fietkau1-1/+3
Prevent racing against other functions disabling the same worker Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: add dummy HW offload of IEEE 802.11 fragmentationBenjamin Lin2-0/+8
Currently, CONNAC2 series do not support encryption for fragmented Tx frames. Therefore, add dummy function mt7915_set_frag_threshold() to prevent SW IEEE 802.11 fragmentation. Signed-off-by: Benjamin Lin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: reset the device after MCU timeoutFelix Fietkau1-0/+9
On MT7915, MCU hangs do not trigger watchdog interrupts, so they can only be detected through MCU message timeouts. Ensure that the hardware gets restarted when that happens in order to prevent a permanent stuck state. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: retry mcu messagesFelix Fietkau3-5/+25
In some cases MCU messages can get lost. Instead of failing completely, attempt to recover by re-sending them. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: set MT76_MCU_RESET early in mt7915_mac_full_resetFelix Fietkau1-0/+1
This avoids running into unnecessary timeouts waiting for MCU responses Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: use mac80211 .sta_state opFelix Fietkau8-56/+90
Allows adding stations before assoc, though they are not passed to the firmware yet at that point. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: change .sta_assoc callback to .sta_eventFelix Fietkau14-36/+67
Also report auth/disassoc events, in order to give the driver more control over handling the station state. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: connac: add support for passing connection state directlyFelix Fietkau6-14/+22
Preparation for improvements to sta handling. No functional changes. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: connac: add support for IEEE 802.11 fragmentationBenjamin Lin2-1/+16
Add fragmentation index into TXD.DW2 to support IEEE 802.11 fragmentation. Signed-off-by: Benjamin Lin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: allocate vif wcid in the same range as stationsFelix Fietkau1-1/+4
Reduces the amount of unnecessary WTBL bank switching, while still reserving WTBL entries for vifs. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7915: disable tx worker during tx BA session enable/disableFelix Fietkau1-3/+7
Avoids firmware race condition. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: add separate tx scheduling queue for off-channel txFelix Fietkau3-26/+41
Ensure that packets are not sent out to the wrong channel Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mac80211: handle ieee80211_radar_detected() for MLOAditya Kumar Singh4-5/+5
Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-09-06wifi: mt76: partially move channel change code to coreFelix Fietkau39-162/+116
This allows the core code to change the channel. Code deduplication and preparation for adding scanning code to the core. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: fix mt76_get_rateFelix Fietkau1-2/+3
Do not assume that the first phy has 2 GHz support. Check sband->band instead of accessing dev->phy.sband_2g. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7603: initialize chainmaskFelix Fietkau1-0/+1
Fixes reported tx power by accounting for the combined output Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7603: fix reading target power from eepromFelix Fietkau1-2/+4
If the ext-PA target power is unset, fall back to the standard EEPROM value. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7603: fix mixed declarations and codeFelix Fietkau1-2/+2
Move the qid variable declaration further up Fixes: b473c0e47f04 ("wifi: mt76: mt7603: fix tx queue of loopback packets") Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: connac: fix checksum offload fields of connac3 RXDPeter Chiu3-7/+6
Fix incorrect RXD offset and bitfield related to RX checksum offload. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Fixes: 4e9011fcdfc4 ("wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h") Co-developed-by: Shayne Chen <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Signed-off-by: Peter Chiu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7996: fix NULL pointer dereference in mt7996_mcu_sta_bfer_heMa Ke1-0/+3
Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he routine adding an sta interface to the mt7996 driver. Found by code review. Cc: [email protected] Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ma Ke <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7996: set IEEE80211_KEY_FLAG_GENERATE_MMIE for other ciphersMichael-CY Lee1-4/+4
When beacon protection is enabled, FW checks MMIE tag & length in the beacon for every cipher mode. To pass the check, driver needs to set the key flag IEEE80211_KEY_GENERATE_MMIE to let mac80211 generate and initialize MMIE. Signed-off-by: Michael-CY Lee <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: connac: add IEEE 802.11 fragmentation support for mt7996Benjamin Lin2-2/+18
Add fragment index into TXD.DW2 to support IEEE 802.11 fragmentation. Signed-off-by: Benjamin Lin <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-06wifi: mt76: mt7996: fix handling mbss enable/disableRex Lu1-1/+1
When mbss was previously enabled, the TLV needs to be included when disabling it again, in order to clear the firmware state. Fixes: a7908d5b61e5 ("wifi: mt76: mt7996: fix non-main BSS no beacon issue for MBSS scenario") Signed-off-by: Rex Lu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-05wifi: mt76: mt7996: set correct value in beamforming mcu command for mt7992Howard Hsu1-2/+3
Configure correct bf number and bitmap in beamforming mcu command for mt7992 chipsets, which only support dual-band. Signed-off-by: Howard Hsu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-05wifi: mt76: mt7996: fix EHT beamforming capability checkHoward Hsu1-2/+2
If a VIF acts as a beamformer, it should check peer's beamformee capability, and vice versa. Fixes: ba01944adee9 ("wifi: mt76: mt7996: add EHT beamforming support") Signed-off-by: Howard Hsu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-05wifi: mt76: mt7996: set correct beamformee SS capabilityHoward Hsu1-6/+17
According to IEEE P802.11be/D6.0 Table 9-417n, beamformee SS field stands for the maximum number of spatial streams that the STA can receive in an EHT sounding NDP minus 1, and the minimum value of this field is 3. This value indicates the decoding capability of a beamformee, which is independent of current antenna settings. Correct the value for mt7996 and mt7992 chipsets based on their HW capability. Signed-off-by: Howard Hsu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-05wifi: mt76: mt7996: fix HE and EHT beamforming capabilitiesHoward Hsu1-22/+43
Fix HE and EHT beamforming capabilities for different bands and interface types. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init") Signed-off-by: Howard Hsu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-05wifi: mt76: mt7996: advertize beacon_int_min_gcdPeter Chiu1-0/+1
Advertize beacon_int_min_gcd as 100 to allow setting different beacon intervals on different interfaces. Signed-off-by: Peter Chiu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-05wifi: mt76: mt7996: fix wmm set of station interface to 3Peter Chiu1-1/+1
According to connac3 HW design, the WMM index of AP and STA interface should be 0 and 3, respectively. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-05wifi: mt76: mt7996: fix traffic delay when switching back to working channelPeter Chiu1-0/+4
During scanning, UNI_CHANNEL_RX_PATH tag is necessary for the firmware to properly stop and resume MAC TX queue. Without this tag, HW needs more time to resume traffic when switching back to working channel. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
2024-09-05wifi: mt76: mt7996: use hweight16 to get correct tx antennaPeter Chiu1-1/+1
The chainmask is u16 so using hweight8 cannot get correct tx_ant. Without this patch, the tx_ant of band 2 would be -1 and lead to the following issue: BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e] Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <[email protected]> Signed-off-by: Shayne Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.