aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igbvf/netdev.c
AgeCommit message (Collapse)AuthorFilesLines
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen1-1/+0
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <[email protected]> Acked-by: Alexander Lobakin <[email protected]> # libeth, libie Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet1-1/+1
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Simon Horman <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29net: intel: implement modern PM ops declarationsJesse Brandeburg1-3/+3
Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-03-04net: adopt skb_network_offset() and similar helpersEric Dumazet1-1/+1
This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Edward Cree <[email protected]> # for sfc Signed-off-by: David S. Miller <[email protected]>
2023-12-18intel: legacy: field get conversionJesse Brandeburg1-3/+2
Refactor several older Intel drivers to use FIELD_GET(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @get@ constant shift,mask; type T; expression a; @@ ( -((T)((a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <[email protected]> CC: Alexander Lobakin <[email protected]> Reviewed-by: Marcin Szycik <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-18intel: add bit macro includes where neededJesse Brandeburg1-14/+14
This series is introducing the use of FIELD_GET and FIELD_PREP which requires bitfield.h to be included. Fix all the includes in this one change, and rearrange includes into alphabetical order to ease readability and future maintenance. virtchnl.h and it's usage was modified to have it's own includes as it should. This required including bits.h for virtchnl.h. Reviewed-by: Marcin Szycik <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-10-18igbvf: replace deprecated strncpy with strscpyJustin Stitt1-1/+1
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect netdev->name to be NUL-terminated based on its usage with `strlen` and format strings: | if (strlen(netdev->name) < (IFNAMSIZ - 5)) { | sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name); Moreover, we do not need NUL-padding as netdev is already zero-allocated: | netdev = alloc_etherdev(sizeof(struct igbvf_adapter)); ... alloc_etherdev() -> alloc_etherdev_mq() -> alloc_etherdev_mqs() -> alloc_netdev_mqs() ... | p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL); Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+6
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-21igbvf: add PCI reset handler functionsDawid Wesierski1-0/+29
There was a problem with resuming ping after conducting a PCI reset. This commit adds two functions, igbvf_io_prepare and igbvf_io_done, which, after being added to the pci_error_handlers struct, will prepare the drivers for a PCI reset and then bring the interface up and reset it after. This will prevent the driver from ending up in incorrect state. Test_and_set_bit is highly reliable in this context, so we are not including a timeout in this commit This introduces 900ms - 1100ms of overhead to this operation but it's in non-time-critical flow. And also allows the driver to continue functioning after the reset. Functionality documented in ethernet-controller-i350-datasheet 4.2.1.3 https://www.intel.com/content/www/us/en/products/details/ethernet/gigabit-controllers/i350-controllers/docs.html Signed-off-by: Dawid Wesierski <[email protected]> Signed-off-by: Kamil Maziarz <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Tested-by: Marek Szlosek <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-03-16intel/igbvf: free irq on the error path in igbvf_request_msix()Gaosheng Cui1-2/+6
In igbvf_request_msix(), irqs have not been freed on the err path, we need to free it. Fix it. Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Gaosheng Cui <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: Marek Szlosek <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-1/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <[email protected]> # for CAN Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-30intel/igbvf:fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'on'. Delete the redundant word 'slot'. Signed-off-by: Jilin Yuan <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-27igbvf: Remove useless DMA-32 fallback configurationChristophe JAILLET1-16/+6
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-21igbvf: Refactor traceKaren Sornek1-1/+1
Refactoring "PF still resetting" message, because previous version looked like a bug - it informed about changes that worked as designed but might confuse users. Changes requested to make message more user-friendly. Signed-off-by: Karen Sornek <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-15igbvf: fix double free in `igbvf_probe`Letu Ren1-0/+1
In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <[email protected]> Signed-off-by: Letu Ren <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski1-5/+3
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jay Vosburgh <[email protected]> Cc: Veaceslav Falico <[email protected]> Cc: Andy Gospodarek <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Vivien Didelot <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Vladimir Oltean <[email protected]> Cc: Leon Romanovsky <[email protected]> Cc: [email protected] Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Jason Gunthorpe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-05-26intel: call csum functions with well formatted argumentsJesse Brandeburg1-1/+1
The sparse build (C=2) found that there were two drivers who had not been convered to call the csum_replace_by_diff() function with sparse clean arguments. Most if not all drivers force the cast like this patch does. So these drivers are now joining the party (a bit late), but with no functional change. Signed-off-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-05-26igb: handle vlan types with checker enabledJesse Brandeburg1-2/+2
The sparse build (C=2) finds some issues with how the driver dealt with the (very difficult) hardware that in some generations uses little-endian, and in others uses big endian, for the VLAN field. The code as written picks __le16 as a type and for some hardware revisions we override it to __be16 as done in this patch. This impacted the VF driver as well so fix it there too. Also change the vlan_tci assignment to override the sparse warning without changing functionality. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Dave Switzer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-01-19net: igbvf: use skb_csum_is_sctp instead of protocol checkXin Long1-13/+1
Using skb_csum_is_sctp is a easier way to validate it's a SCTP CRC checksum offload packet, and yet it also makes igbvf support SCTP CRC checksum offload for UDP and GRE encapped packets, just as it does in igb driver. Signed-off-by: Xin Long <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-24igbvf: Refactor tracesKaren Sornek1-2/+2
Refactoring "PF still resetting" and changing "Failed to add vlan id" to "Vlan id is not added" messages because previous version looked like a bug - it informed about changes that worked as designed but might confuse users Signed-off-by: Karen Sornek <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-25intel-ethernet: clean up W=1 warnings in kdocJesse Brandeburg1-5/+12
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-30igbvf: use generic power managementVaibhav Gupta1-29/+8
Remove legacy PM callbacks and use generic operations. With legacy code, drivers were responsible for handling PCI PM operations like pci_save_state(). In generic code, all these are handled by PCI core. The generic suspend() and resume() are called at the same point the legacy ones were called. Thus, it does not affect the normal functioning of the driver. __maybe_unused attribute is used with .resume() but not with .suspend(), as .suspend() is called by .shutdown(). Compile-tested only. Signed-off-by: Vaibhav Gupta <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher1-2/+2
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher1-4/+1
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <[email protected]> CC: Jesse Brandeburg <[email protected]> CC: Alek Loktionov <[email protected]> CC: Kevin Liedtke <[email protected]> CC: Aaron Rowden <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Co-developed-by: Jacob Keller <[email protected]> Tested-by: Aaron Brown <[email protected]>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-1/+1
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Heiner Kallweit <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Acked-by: Shannon Nelson <[email protected]> Reviewed-by: Martin Habets <[email protected]> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <[email protected]>
2019-11-07net: ethernet: intel: Demote MTU change prints to debugFlorian Fainelli1-2/+2
Changing a network device MTU can be a fairly frequent operation, and failure to change the MTU is reflected to user-space properly, both by an appropriate message as well as by looking at whether the device's MTU matches the configuration. Demote the prints to debug prints by using netdev_dbg(), making all Intel wired LAN drivers consistent, since they used a mixture of PCI device and network device prints before. Signed-off-by: Florian Fainelli <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)1-1/+1
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon1-4/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-11-21ethernet/intel: consolidate NAPI and NAPI exitJesse Brandeburg1-3/+6
While reviewing code, I noticed that Eric Dumazet recommends that drivers check the return code of napi_complete_done, and use that to decide to enable interrupts or not when exiting poll. One of the Intel drivers was already fixed (ixgbe). Upon looking at the Intel drivers as a whole, we are handling our polling and NAPI exit in a few different ways based on whether we have multiqueue and whether we have Tx cleanup included. Several drivers had the bug of exiting NAPI with return 0, which appears to mess up the accounting in the stack. Consolidate all the NAPI routines to do best known way of exiting and to just mostly look like each other. 1) check return code of napi_complete_done to control interrupt enable 2) return the actual amount of work done. 3) return budget immediately if need NAPI poll again Tested the changes on e1000e with a high interrupt rate set, and it shows about an 8% reduction in the CPU utilization when busy polling because we aren't re-enabling interrupts when we're about to be polled. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-09-18intel-ethernet: use correct module licenseJesse Brandeburg1-1/+1
We recently updated all our SPDX identifiers to correctly indicate our net/ethernet/intel/* drivers were always released and intended to be released under GPL v2, but the MODULE_LICENSE declaration was never updated. Fix the MODULE_LICENSE to be GPL v2, for all our drivers. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-08-07igbvf: netdev: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114801 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-25/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <[email protected]> Acked-by: Shannon Nelson <[email protected]> Acked-by: Richard Cochran <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-21igbvf: Use smp_rmb rather than read_barrier_dependsBrian King1-1/+1
The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with igbvf as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable <[email protected]> Signed-off-by: Brian King <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-10-18ethernet/intel: Convert timers to use timer_setup()Kees Cook1-4/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Switches test of .data field to .function, since .data will be going away. Cc: Jeff Kirsher <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-08igbvf: add lock around mailbox opsGreg Edwards1-0/+47
The PF driver assumes the VF will not send another mailbox message until the PF has written its reply to the previous message. If the VF does, that message will be silently dropped by the PF before it writes its reply to the mailbox. This results in a VF mailbox timeout for posted messages waiting for an ACK, and the VF is reset by the igbvf_watchdog_task in the VM. Add a lock around the VF mailbox ops to prevent the VF from sending another message while the PF is still processing the previous one. Signed-off-by: Greg Edwards <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-04-20igbvf: Use net_device_stats from struct net_deviceTobias Klauser1-21/+5
Instead of using a private copy of struct net_device_stats in struct igbvf_adapter, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-04-20igb/igbvf: Add VF MAC filter request capabilitiesYury Kylulin1-2/+42
Add functionality for the VF to request up to 3 additional MAC filters. This is done using existing E1000_VF_SET_MAC_ADDR message, but with additional message info - E1000_VF_MAC_FILTER_CLR to clear all unicast MAC filters previously set for this VF and E1000_VF_MAC_FILTER_ADD to add MAC filter. Additional filters can be added only in case if administrator did not set VF MAC explicitly and allowed to change default MAC to the VF. Due to the limited number of RAR entries reserve at least 3 MAC filters for the PF. If SRIOV is supported by the NIC after this change RAR entries starting from 1 to (RAR MAX ENTRIES - NUM SRIOV VFS) will be used for PF and VF MAC filters. Signed-off-by: Yury Kylulin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+6
Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <[email protected]>
2016-12-01igb/igbvf: Don't use lco_csum to compute IPv4 checksumAlexander Duyck1-2/+6
In the case of IPIP and SIT tunnel frames the outer transport header offset is actually set to the same offset as the inner transport header. This results in the lco_csum call not doing any checksum computation over the inner IPv4/v6 header data. In order to account for that I am updating the code so that we determine the location to start the checksum ourselves based on the location of the IPv4 header and the length. Fixes: e10715d3e961 ("igb/igbvf: Add support for GSO partial") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-10-18ethernet/intel: use core min/max MTU checkingJarod Wilson1-10/+4
e100: min_mtu 68, max_mtu 1500 - remove e100_change_mtu entirely, is identical to old eth_change_mtu, and no longer serves a purpose. No need to set min_mtu or max_mtu explicitly, as ether_setup() will already set them to 68 and 1500. e1000: min_mtu 46, max_mtu 16110 e1000e: min_mtu 68, max_mtu varies based on adapter fm10k: min_mtu 68, max_mtu 15342 - remove fm10k_change_mtu entirely, does nothing now i40e: min_mtu 68, max_mtu 9706 i40evf: min_mtu 68, max_mtu 9706 igb: min_mtu 68, max_mtu 9216 - There are two different "max" frame sizes claimed and both checked in the driver, the larger value wasn't relevant though, so I've set max_mtu to the smaller of the two values here to retain identical behavior. igbvf: min_mtu 68, max_mtu 9216 - Same issue as igb duplicated ixgb: min_mtu 68, max_mtu 16114 - Also remove pointless old == new check, as that's done in dev_set_mtu ixgbe: min_mtu 68, max_mtu 9710 ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware - Some hw can only handle up to max_mtu 1504 on a vf, others 9710 CC: [email protected] CC: [email protected] CC: Jeff Kirsher <[email protected]> Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-27igbvf: bump version to igbvf-2.4.0Todd Fujinaka1-1/+1
Bump version to match other igbvf drivers. Signed-off-by: Todd Fujinaka <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-05-20intel: Add support for IPv6 IP-in-IP offloadAlexander Duyck1-0/+1
This patch adds support for offloading IPXIP6 type packets that represent either IPv4 or IPv6 encapsulated inside of an IPv6 outer IP header. In addition with this change we should also be able to support FOU encapsulated traffic with outer IPv6 headers. Signed-off-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-20net: define gso types for IPx over IPv4 and IPv6Tom Herbert1-2/+1
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-13igb/igbvf: Add support for GSO partialAlexander Duyck1-75/+107
This patch adds support for partial GSO segmentation in the case of tunnels. Specifically with this change the driver an perform segmentation as long as the frame either has IPv6 inner headers, or we are allowed to mangle the IP IDs on the inner header. This is needed because we will not be modifying any fields from the start of the start of the outer transport header to the start of the inner transport header as we are treating them like they are just a block of IP options. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-05-13igbvf: use BIT() macro instead of shiftsJacob Keller1-5/+5
To prevent signed bitshift issues, and improve code readability, use the BIT() macro. Also make use of GENMASK or the unsigned postfix where this is more appropriate than BIT() Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-05-13igbvf: remove unused variable and dead codeJacob Keller1-3/+1
The variable rdlen is set but never used, and thus setting it is dead code. Remove it. Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-02-24igbvf: remove "link is Up" message when registering mcast addressJon Maxwell1-1/+0
A similar issue was addressed a few years ago in the following thread: http://www.spinics.net/lists/netdev/msg245877.html At that time there were concerns that removing this statement may cause other side effects. However the submitter addressed those concerns. But the dialogue went cold. We have a new case where a customers application is registering and un-registering multicast addresses every few seconds. This is leading to many "Link is Up" messages in the logs as a result of the "netif_carrier_off(netdev)" statement called by igbvf_msix_other(). Also on some kernels it is interfering with the bonding driver causing it to failover and subsequently affecting connectivity. The Sourgeforge driver does not make this call and is therefore not affected. If there were any side effects I would expect that driver to also be affected. I have tested re-loading the igbvf driver and downing the adapter with the PF entity on the host where the VM has this patch. When I bring it back up again connectivity is restored as expected. Therefore I request that this patch gets submitted. Signed-off-by: Jon Maxwell <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-02-24igbvf: Add support for generic Tx checksumsAlexander Duyck1-61/+81
This patch adds support for generic Tx checksums to the igbvf driver. It turns out this is actually pretty easy after going over the datasheet as we were doing a number of steps we didn't need to. In order to perform a Tx checksum for an L4 header we need to fill in the following fields in the Tx descriptor: MACLEN (maximum of 127), retrieved from: skb_network_offset() IPLEN (maximum of 511), retrieved from: skb_checksum_start_offset() - skb_network_offset() TUCMD.L4T indicates offset and if checksum or crc32c, based on: skb->csum_offset The added advantage to doing this is that we can support inner checksum offloads for tunnels and MPLS while still being able to transparently insert VLAN tags. I also took the opportunity to clean-up many of the feature flag configuration bits to make them a bit more consistent between drivers. In the case of the VF drivers this meant adding support for SCTP CRCs, and inner checksum offloads for MPLS and various tunnel types. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.