aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice_txrx.c
AgeCommit message (Collapse)AuthorFilesLines
2024-09-06ice: don't set target VSI for subfunctionMichal Swiatkowski1-1/+1
Add check for subfunction before setting target VSI. It is needed for PF in switchdev mode but not for subfunction (even in switchdev mode). Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-20ice: fix truesize operations for PAGE_SIZE >= 8192Maciej Fijalkowski1-33/+0
When working on multi-buffer packet on arch that has PAGE_SIZE >= 8192, truesize is calculated and stored in xdp_buff::frame_sz per each processed Rx buffer. This means that frame_sz will contain the truesize based on last received buffer, but commit 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") assumed this value will be constant for each buffer, which breaks the page recycling scheme and mess up the way we update the page::page_offset. To fix this, let us work on constant truesize when PAGE_SIZE >= 8192 instead of basing this on size of a packet read from Rx descriptor. This way we can simplify the code and avoid calculating truesize per each received frame and on top of that when using xdp_update_skb_shared_info(), current formula for truesize update will be valid. This means ice_rx_frame_truesize() can be removed altogether. Furthermore, first call to it within ice_clean_rx_irq() for 4k PAGE_SIZE was redundant as xdp_buff::frame_sz is initialized via xdp_init_buff() in ice_vsi_cfg_rxq(). This should have been removed at the point where xdp_buff struct started to be a member of ice_rx_ring and it was no longer a stack based variable. There are two fixes tags as my understanding is that the first one exposed us to broken truesize and page_offset handling and then second introduced broken skb_shared_info update in ice_{construct,build}_skb(). Reported-and-tested-by: Luiz Capitulino <luizcap@redhat.com> Closes: https://lore.kernel.org/netdev/8f9e2a5c-fd30-4206-9311-946a06d031bb@redhat.com/ Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-20ice: fix ICE_LAST_OFFSET formulaMaciej Fijalkowski1-1/+1
For bigger PAGE_SIZE archs, ice driver works on 3k Rx buffers. Therefore, ICE_LAST_OFFSET should take into account ICE_RXBUF_3072, not ICE_RXBUF_2048. Fixes: 7237f5b0dba4 ("ice: introduce legacy Rx flag") Suggested-by: Luiz Capitulino <luizcap@redhat.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-20ice: fix page reuse when PAGE_SIZE is over 8kMaciej Fijalkowski1-9/+3
Architectures that have PAGE_SIZE >= 8192 such as arm64 should act the same as x86 currently, meaning reuse of a page should only take place when no one else is busy with it. Do two things independently of underlying PAGE_SIZE: - store the page count under ice_rx_buf::pgcnt - then act upon its value vs ice_rx_buf::pagecnt_bias when making the decision regarding page reuse Fixes: 2b245cb29421 ("ice: Implement transmit and NAPI support") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_progMaciej Fijalkowski1-1/+1
It is read by data path and modified from process context on remote cpu so it is needed to use WRITE_ONCE to clear the pointer. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: improve updating ice_{t,r}x_ring::xsk_poolMaciej Fijalkowski1-3/+5
xsk_buff_pool pointers that ice ring structs hold are updated via ndo_bpf that is executed in process context while it can be read by remote CPU at the same time within NAPI poll. Use synchronize_net() after pointer update and {READ,WRITE}_ONCE() when working with mentioned pointer. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-28net: remove gfp_mask from napi_alloc_skb()Jakub Kicinski1-2/+1
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is implied. The only practical choice the caller has is whether to set __GFP_NOWARN. But that's a false choice, too, allocation failures in atomic context will happen, and printing warnings in logs, effectively for a packet drop, is both too much and very likely non-actionable. This leads me to a conclusion that most uses of napi_alloc_skb() are simply misguided, and should use __GFP_NOWARN in the first place. We also have a "standard" way of reporting allocation failures via the queue stat API (qstats::rx-alloc-fail). The direct motivation for this patch is that one of the drivers used at Meta calls napi_alloc_skb() (so prior to this patch without __GFP_NOWARN), and the resulting OOM warning is the top networking warning in our fleet. Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24ice: remove redundant xdp_rxq_info registrationMaciej Fijalkowski1-5/+0
xdp_rxq_info struct can be registered by drivers via two functions - xdp_rxq_info_reg() and __xdp_rxq_info_reg(). The latter one allows drivers that support XDP multi-buffer to set up xdp_rxq_info::frag_size which in turn will make it possible to grow the packet via bpf_xdp_adjust_tail() BPF helper. Currently, ice registers xdp_rxq_info in two spots: 1) ice_setup_rx_ring() // via xdp_rxq_info_reg(), BUG 2) ice_vsi_cfg_rxq() // via __xdp_rxq_info_reg(), OK Cited commit under fixes tag took care of setting up frag_size and updated registration scheme in 2) but it did not help as 1) is called before 2) and as shown above it uses old registration function. This means that 2) sees that xdp_rxq_info is already registered and never calls __xdp_rxq_info_reg() which leaves us with xdp_rxq_info::frag_size being set to 0. To fix this misbehavior, simply remove xdp_rxq_info_reg() call from ice_setup_rx_ring(). Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-7-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24ice: work on pre-XDP prog frag countMaciej Fijalkowski1-5/+9
Fix an OOM panic in XDP_DRV mode when a XDP program shrinks a multi-buffer packet by 4k bytes and then redirects it to an AF_XDP socket. Since support for handling multi-buffer frames was added to XDP, usage of bpf_xdp_adjust_tail() helper within XDP program can free the page that given fragment occupies and in turn decrease the fragment count within skb_shared_info that is embedded in xdp_buff struct. In current ice driver codebase, it can become problematic when page recycling logic decides not to reuse the page. In such case, __page_frag_cache_drain() is used with ice_rx_buf::pagecnt_bias that was not adjusted after refcount of page was changed by XDP prog which in turn does not drain the refcount to 0 and page is never freed. To address this, let us store the count of frags before the XDP program was executed on Rx ring struct. This will be used to compare with current frag count from skb_shared_info embedded in xdp_buff. A smaller value in the latter indicates that XDP prog freed frag(s). Then, for given delta decrement pagecnt_bias for XDP_DROP verdict. While at it, let us also handle the EOP frag within ice_set_rx_bufs_act() to make our life easier, so all of the adjustments needed to be applied against freed frags are performed in the single place. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-5-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-22Merge branch '1GbE' of ↵David S. Miller1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== intel: use bitfield operations Jesse Brandeburg says: After repeatedly getting review comments on new patches, and sporadic patches to fix parts of our drivers, we should just convert the Intel code to use FIELD_PREP() and FIELD_GET(). It's then "common" in the code and hopefully future change-sets will see the context and do-the-right-thing. This conversion was done with a coccinelle script which is mentioned in the commit messages. Generally there were only a couple conversions that were "undone" after the automatic changes because they tried to convert a non-contiguous mask. Patch 1 is required at the beginning of this series to fix a "forever" issue in the e1000e driver that fails the compilation test after conversion because the shift / mask was out of range. The second patch just adds all the new #includes in one go. The patch titled: "ice: fix pre-shifted bit usage" is needed to allow the use of the FIELD_* macros and fix up the unexpected "shifts included" defines found while creating this series. The rest are the conversion to use FIELD_PREP()/FIELD_GET(), and the occasional leXX_{get,set,encode}_bits() call, as suggested by Alex. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-18ice: field prep conversionJesse Brandeburg1-3/+3
Refactor ice driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. Several places I changed to OR into a single variable with |= instead of using a multi-line statement with trailing OR operators, as it (subjectively) makes the code clearer. A local variable vmvf_and_timeout was created and used to avoid multiple logical ORs being __le16 converted, which shortened some lines and makes the code cleaner. Also clean up a couple of places where conversions were made to have the code read more clearly/consistently. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <Julia.Lawall@inria.fr> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-13ice: Implement VLAN tag hintLarysa Zaremba1-3/+3
Implement .xmo_rx_vlan_tag callback to allow XDP code to read packet's VLAN tag. At the same time, use vlan_tci instead of vlan_tag in touched code, because VLAN tag often refers to VLAN proto and VLAN TCI combined, while in the code we clearly store only VLAN TCI. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-11-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13ice: Introduce ice_xdp_buffLarysa Zaremba1-2/+5
In order to use XDP hints via kfuncs we need to put RX descriptor and miscellaneous data next to xdp_buff. Same as in hints implementations in other drivers, we achieve this through putting xdp_buff into a child structure. Currently, xdp_buff is stored in the ring structure, so replace it with union that includes child structure. This way enough memory is available while existing XDP code remains isolated from hints. Minimum size of the new child structure (ice_xdp_buff) is exactly 64 bytes (single cache line). To place it at the start of a cache line, move 'next' field from CL1 to CL4, as it isn't used often. This still leaves 192 bits available in CL3 for packet context extensions. Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-5-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13ice: Make ptype internal to descriptor info processingLarysa Zaremba1-5/+1
Currently, rx_ptype variable is used only as an argument to ice_process_skb_fields() and is computed just before the function call. Therefore, there is no reason to pass this value as an argument. Instead, remove this argument and compute the value directly inside ice_process_skb_fields() function. Also, separate its calculation into a short function, so the code can later be reused in .xmo_() callbacks. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-4-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller1-3/+0
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-01ice: recycle/free all of the fragments from multi-buffer frameMaciej Fijalkowski1-1/+1
The ice driver caches next_to_clean value at the beginning of ice_clean_rx_irq() in order to remember the first buffer that has to be freed/recycled after main Rx processing loop. The end boundary is indicated by first descriptor of frame that Rx processing loop has ended its duties. Note that if mentioned loop ended in the middle of gathering multi-buffer frame, next_to_clean would be pointing to the descriptor in the middle of the frame BUT freeing/recycling stage will stop at the first descriptor. This means that next iteration of ice_clean_rx_irq() will miss the (first_desc, next_to_clean - 1) entries. When running various 9K MTU workloads, such splats were observed: [ 540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 540.787787] #PF: supervisor read access in kernel mode [ 540.793002] #PF: error_code(0x0000) - not-present page [ 540.798218] PGD 0 P4D 0 [ 540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G W 6.3.0-rc7+ #96 [ 540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice] [ 540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98 [ 540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282 [ 540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe [ 540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [ 540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100 [ 540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004 [ 540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040 [ 540.890253] FS: 00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000 [ 540.898465] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0 [ 540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 540.926032] PKRU: 55555554 [ 540.928790] Call Trace: [ 540.931276] <TASK> [ 540.933418] ice_napi_poll+0x4ca/0x6d0 [ice] [ 540.937804] ? __pfx_ice_napi_poll+0x10/0x10 [ice] [ 540.942716] napi_busy_loop+0xd7/0x320 [ 540.946537] xsk_recvmsg+0x143/0x170 [ 540.950178] sock_recvmsg+0x99/0xa0 [ 540.953729] __sys_recvfrom+0xa8/0x120 [ 540.957543] ? do_futex+0xbd/0x1d0 [ 540.961008] ? __x64_sys_futex+0x73/0x1d0 [ 540.965083] __x64_sys_recvfrom+0x20/0x30 [ 540.969155] do_syscall_64+0x38/0x90 [ 540.972796] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 540.977934] RIP: 0033:0x7f6de5f27934 To fix this, set cached_ntc to first_desc so that at the end, when freeing/recycling buffers, descriptors from first to ntc are not missed. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-12ice: Fix undersized tx_flags variableJan Sokolowski1-5/+3
As not all ICE_TX_FLAGS_* fit in current 16-bit limited tx_flags field that was introduced in the Fixes commit, VLAN-related information would be discarded completely. As such, creating a vlan and trying to run ping through would result in no traffic passing. Fix that by refactoring tx_flags variable into flags only and a separate variable that holds VLAN ID. As there is some space left, type variable can fit between those two. Pahole reports no size change to ice_tx_buf struct. Fixes: aa1d3faf71a6 ("ice: Robustify cleaning/completing XDP Tx buffers") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-28ice: fix W=1 headers mismatchJesse Brandeburg1-1/+1
make modules W=1 returns: .../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx' .../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf' .../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb' Fix these warnings by adding and deleting the deviant arguments. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Fixes: d7956d81f150 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()") CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: fix rx buffers handling for flow director packetsPiotr Raczynski1-0/+1
Adding flow director filters stopped working correctly after commit 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side"). As a result, only first flow director filter can be added, adding next filter leads to NULL pointer dereference attached below. Rx buffer handling and reallocation logic has been optimized, however flow director specific traffic was not accounted for. As a result driver handled those packets incorrectly since new logic was based on ice_rx_ring::first_desc which was not set in this case. Fix this by setting struct ice_rx_ring::first_desc to next_to_clean for flow director received packets. [ 438.544867] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 438.551840] #PF: supervisor read access in kernel mode [ 438.556978] #PF: error_code(0x0000) - not-present page [ 438.562115] PGD 7c953b2067 P4D 0 [ 438.565436] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 438.569794] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.2.0-net-bug #1 [ 438.577531] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ 438.588470] RIP: 0010:ice_clean_rx_irq+0x2b9/0xf20 [ice] [ 438.593860] Code: 45 89 f7 e9 ac 00 00 00 8b 4d 78 41 31 4e 10 41 09 d5 4d 85 f6 0f 84 82 00 00 00 49 8b 4e 08 41 8b 76 1c 65 8b 3d 47 36 4a 3f <48> 8b 11 48 c1 ea 36 39 d7 0f 85 a6 00 00 00 f6 41 08 02 0f 85 9c [ 438.612605] RSP: 0018:ff8c732640003ec8 EFLAGS: 00010082 [ 438.617831] RAX: 0000000000000800 RBX: 00000000000007ff RCX: 0000000000000000 [ 438.624957] RDX: 0000000000000800 RSI: 0000000000000000 RDI: 0000000000000000 [ 438.632089] RBP: ff4ed275a2158200 R08: 00000000ffffffff R09: 0000000000000020 [ 438.639222] R10: 0000000000000000 R11: 0000000000000020 R12: 0000000000001000 [ 438.646356] R13: 0000000000000000 R14: ff4ed275d0daffe0 R15: 0000000000000000 [ 438.653485] FS: 0000000000000000(0000) GS:ff4ed2738fa00000(0000) knlGS:0000000000000000 [ 438.661563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 438.667310] CR2: 0000000000000000 CR3: 0000007c9f0d6006 CR4: 0000000000771ef0 [ 438.674444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 438.681573] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 438.688697] PKRU: 55555554 [ 438.691404] Call Trace: [ 438.693857] <IRQ> [ 438.695877] ? profile_tick+0x17/0x80 [ 438.699542] ice_msix_clean_ctrl_vsi+0x24/0x50 [ice] [ 438.702571] ice 0000:b1:00.0: VF 1: ctrl_vsi irq timeout [ 438.704542] __handle_irq_event_percpu+0x43/0x1a0 [ 438.704549] handle_irq_event+0x34/0x70 [ 438.704554] handle_edge_irq+0x9f/0x240 [ 438.709901] iavf 0000:b1:01.1: Failed to add Flow Director filter with status: 6 [ 438.714571] __common_interrupt+0x63/0x100 [ 438.714580] common_interrupt+0xb4/0xd0 [ 438.718424] iavf 0000:b1:01.1: Rule ID: 127 dst_ip: 0.0.0.0 src_ip 0.0.0.0 UDP: dst_port 4 src_port 0 [ 438.722255] </IRQ> [ 438.722257] <TASK> [ 438.722257] asm_common_interrupt+0x22/0x40 [ 438.722262] RIP: 0010:cpuidle_enter_state+0xc8/0x430 [ 438.722267] Code: 6e e9 25 ff e8 f9 ef ff ff 8b 53 04 49 89 c5 0f 1f 44 00 00 31 ff e8 d7 f1 24 ff 45 84 ff 0f 85 57 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 85 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 438.722269] RSP: 0018:ffffffff86003e50 EFLAGS: 00000246 [ 438.784108] RAX: ff4ed2738fa00000 RBX: ffbe72a64fc01020 RCX: 0000000000000000 [ 438.791234] RDX: 0000000000000000 RSI: ffffffff858d84de RDI: ffffffff85893641 [ 438.798365] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000003158af9d [ 438.805490] R10: 0000000000000008 R11: 0000000000000354 R12: ffffffff862365a0 [ 438.812622] R13: 000000661b472a87 R14: 0000000000000002 R15: 0000000000000000 [ 438.819757] cpuidle_enter+0x29/0x40 [ 438.823333] do_idle+0x1b6/0x230 [ 438.826566] cpu_startup_entry+0x19/0x20 [ 438.830492] rest_init+0xcb/0xd0 [ 438.833717] arch_call_rest_init+0xa/0x30 [ 438.837731] start_kernel+0x776/0xb70 [ 438.841396] secondary_startup_64_no_verify+0xe5/0xeb [ 438.846449] </TASK> Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-20Merge tag 'for-netdev' of ↵Jakub Kicinski1-24/+43
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-02-17 We've added 64 non-merge commits during the last 7 day(s) which contain a total of 158 files changed, 4190 insertions(+), 988 deletions(-). The main changes are: 1) Add a rbtree data structure following the "next-gen data structure" precedent set by recently-added linked-list, that is, by using kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky. 2) Add a new benchmark for hashmap lookups to BPF selftests, from Anton Protopopov. 3) Fix bpf_fib_lookup to only return valid neighbors and add an option to skip the neigh table lookup, from Martin KaFai Lau. 4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accouting for container environments, from Yafang Shao. 5) Batch of ice multi-buffer and driver performance fixes, from Alexander Lobakin. 6) Fix a bug in determining whether global subprog's argument is PTR_TO_CTX, which is based on type names which breaks kprobe progs, from Andrii Nakryiko. 7) Prep work for future -mcpu=v4 LLVM option which includes usage of BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier, from Eduard Zingerman. 8) More prep work for later building selftests with Memory Sanitizer in order to detect usages of undefined memory, from Ilya Leoshkevich. 9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer dereference via sendmsg(), from Maciej Fijalkowski. 10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui. 11) Fix BPF memory allocator in combination with BPF hashtab where it could corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao. 12) Fix LoongArch BPF JIT to always use 4 instructions for function address so that instruction sequences don't change between passes, from Hengqi Chen. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits) selftests/bpf: Add bpf_fib_lookup test bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup riscv, bpf: Add bpf trampoline support for RV64 riscv, bpf: Add bpf_arch_text_poke support for RV64 riscv, bpf: Factor out emit_call for kernel and bpf context riscv: Extend patch_text for multiple instructions Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES" selftests/bpf: Add global subprog context passing tests selftests/bpf: Convert test_global_funcs test to test_loader framework bpf: Fix global subprog context argument resolution logic LoongArch, bpf: Use 4 instructions for function address in JIT bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state bpf: Disable bh in bpf_test_run for xdp and tc prog xsk: check IFF_UP earlier in Tx path Fix typos in selftest/bpf files selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd() ... ==================== Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14ice: add support BIG TCP on IPv6Pawel Chmielewski1-0/+3
Enable sending BIG TCP packets on IPv6 in the ice driver using generic ipv6_hopopt_jumbo_remove helper for stripping HBH header. Tested: netperf -t TCP_RR -H 2001:db8:0:f101::1 -- -r80000,80000 -O MIN_LATENCY,P90_LATENCY,P99_LATENCY,TRANSACTION_RATE Tested on two different setups. In both cases, the following settings were applied after loading the changed driver: ip link set dev enp175s0f1np1 gso_max_size 130000 ip link set dev enp175s0f1np1 gro_max_size 130000 ip link set dev enp175s0f1np1 mtu 9000 First setup: Before: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 134 279 410 3961.584 After: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 135 178 216 6093.404 The other setup: Before: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 218 414 478 2944.765 After: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 146 238 266 4700.596 Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-13ice: Micro-optimize .ndo_xdp_xmit() pathAlexander Lobakin1-1/+20
After the recent mbuf changes, ice_xmit_xdp_ring() became a 3-liner. It makes no sense to keep it global in a different file than its caller. Move it just next to the sole call site and mark static. Also, it doesn't need a full xdp_convert_frame_to_buff(). Save several cycles and fill only the fields used by __ice_xmit_xdp_ring() later on. Finally, since it doesn't modify @xdpf anyhow, mark the argument const to save some more (whole -11 bytes of .text! :D). Thanks to 1 jump less and less calcs as well, this yields as many as 6.7 Mpps per queue. `xdp.data_hard_start = xdpf` is fully intentional again (see xdp_convert_buff_to_frame()) and just works when there are no source device's driver issues. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-7-alexandr.lobakin@intel.com
2023-02-13ice: Fix freeing XDP frames backed by Page PoolAlexander Lobakin1-1/+4
As already mentioned, freeing any &xdp_frame via page_frag_free() is wrong, as it assumes the frame is backed by either an order-0 page or a page with no "patrons" behind them, while in fact frames backed by Page Pool can be redirected to a device, which's driver doesn't use it. Keep storing a pointer to the raw buffer and then freeing it unconditionally via page_frag_free() for %XDP_TX frames, but introduce a separate type in the enum for frames coming through .ndo_xdp_xmit(), and free them via xdp_return_frame_bulk(). Note that saving xdpf as xdp_buff->data_hard_start is intentional and is always true when everything is configured properly. After this change, %XDP_REDIRECT from a Page Pool based driver to ice becomes zero-alloc as it should be and horrendous 3.3 Mpps / queue turn into 6.6, hehe. Let it go with no "Fixes:" tag as it spans across good 5+ commits and can't be trivially backported. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-6-alexandr.lobakin@intel.com
2023-02-13ice: Robustify cleaning/completing XDP Tx buffersAlexander Lobakin1-19/+19
When queueing frames from a Page Pool for redirecting to a device backed by the ice driver, `perf top` shows heavy load on page_alloc() and page_frag_free(), despite that on a properly working system it must be fully or at least almost zero-alloc. The problem is in fact a bit deeper and raises from how ice cleans up completed Tx buffers. The story so far: when cleaning/freeing the resources related to a particular completed Tx frame (skbs, DMA mappings etc.), ice uses some heuristics only without setting any type explicitly (except for dummy Flow Director packets, which are marked via ice_tx_buf::tx_flags). This kinda works, but only up to some point. For example, currently ice assumes that each frame coming to __ice_xmit_xdp_ring(), is backed by either plain order-0 page or plain page frag, while it may also be backed by Page Pool or any other possible memory models introduced in future. This means any &xdp_frame must be freed properly via xdp_return_frame() family with no assumptions. In order to do that, the whole heuristics must be replaced with setting the Tx buffer/frame type explicitly, just how it's always been done via an enum. Let us reuse 16 bits from ::tx_flags -- 1 bit-and instr won't hurt much -- especially given that sometimes there was a check for %ICE_TX_FLAGS_DUMMY_PKT, which is now turned from a flag to an enum member. The rest of the changes is straightforward and most of it is just a conversion to rely now on the type set in &ice_tx_buf rather than to some secondary properties. For now, no functional changes intended, the change only prepares the ground for starting freeing XDP frames properly next step. And it must be done atomically/synchronously to not break stuff. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-5-alexandr.lobakin@intel.com
2023-02-13ice: Remove two impossible branches on XDP Tx cleaningAlexander Lobakin1-4/+1
The tagged commit started sending %XDP_TX frames from XSk Rx ring directly without converting it to an &xdp_frame. However, when XSk is enabled on a queue pair, it has its separate Tx cleaning functions, so neither ice_clean_xdp_irq() nor ice_unmap_and_free_tx_buf() ever happens there. Remove impossible branches in order to reduce the diffstat of the upcoming change. Fixes: a24b4c6e9aab ("ice: xsk: Do not convert to buff to frame for XDP_TX") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-4-alexandr.lobakin@intel.com
2023-02-01ice: xsk: Do not convert to buff to frame for XDP_TXMaciej Fijalkowski1-4/+8
Let us store pointer to xdp_buff that came from xsk_buff_pool on tx_buf so that it will be possible to recycle it via xsk_buff_free() on Tx cleaning side. This way it is not necessary to do expensive copy to another xdp_buff backed by a newly allocated page. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-14-maciej.fijalkowski@intel.com
2023-02-01ice: Remove next_{dd,rs} fields from ice_tx_ringMaciej Fijalkowski1-2/+0
Now that both ZC and standard XDP data paths stopped using Tx logic based on next_dd and next_rs fields, we can safely remove these fields and shrink Tx ring structure. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-13-maciej.fijalkowski@intel.com
2023-02-01ice: Add support for XDP multi-buffer on Tx sideMaciej Fijalkowski1-4/+10
Similarly as for Rx side in previous patch, logic on XDP Tx in ice driver needs to be adjusted for multi-buffer support. Specifically, the way how HW Tx descriptors are produced and cleaned. Currently, XDP_TX works on strict ring boundaries, meaning it sets RS bit (on producer side) / looks up DD bit (on consumer/cleaning side) every quarter of the ring. It means that if for example multi buffer frame would span across the ring quarter boundary (say that frame consists of 4 frames and we start from 62 descriptor where ring is sized to 256 entries), RS bit would be produced in the middle of multi buffer frame, which would be a broken behavior as it needs to be set on the last descriptor of the frame. To make it work, set RS bit at the last descriptor from the batch of frames that XDP_TX action was used on and make the first entry remember the index of last descriptor with RS bit set. This way, cleaning side can take the index of descriptor with RS bit, look up DD bit's presence and clean from first entry to last. In order to clean up the code base introduce the common ice_set_rs_bit() which will return index of descriptor that got RS bit produced on so that standard driver can store this within proper ice_tx_buf and ZC driver can simply ignore return value. Co-developed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-12-maciej.fijalkowski@intel.com
2023-02-01ice: Add support for XDP multi-buffer on Rx sideMaciej Fijalkowski1-73/+129
Ice driver needs to be a bit reworked on Rx data path in order to support multi-buffer XDP. For skb path, it currently works in a way that Rx ring carries pointer to skb so if driver didn't manage to combine fragmented frame at current NAPI instance, it can restore the state on next instance and keep looking for last fragment (so descriptor with EOP bit set). What needs to be achieved is that xdp_buff needs to be combined in such way (linear + frags part) in the first place. Then skb will be ready to go in case of XDP_PASS or BPF program being not present on interface. If BPF program is there, it would work on multi-buffer XDP. At this point xdp_buff resides directly on Rx ring, so given the fact that skb will be built straight from xdp_buff, there will be no further need to carry skb on Rx ring. Besides removing skb pointer from Rx ring, lots of members have been moved around within ice_rx_ring. First and foremost reason was to place rx_buf with xdp_buff on the same cacheline. This means that once we touch rx_buf (which is a preceding step before touching xdp_buff), xdp_buff will already be hot in cache. Second thing was that xdp_rxq is used rather rarely and it occupies a separate cacheline, so maybe it is better to have it at the end of ice_rx_ring. Other change that affects ice_rx_ring is the introduction of ice_rx_ring::first_desc. Its purpose is twofold - first is to propagate rx_buf->act to all the parts of current xdp_buff after running XDP program, so that ice_put_rx_buf() that got moved out of the main Rx processing loop will be able to tak an appriopriate action on each buffer. Second is for ice_construct_skb(). ice_construct_skb() has a copybreak mechanism which had an explicit impact on xdp_buff->skb conversion in the new approach when legacy Rx flag is toggled. It works in a way that linear part is 256 bytes long, if frame is bigger than that, remaining bytes are going as a frag to skb_shared_info. This means while memcpying frags from xdp_buff to newly allocated skb, care needs to be taken when picking the destination frag array entry. Upon the time ice_construct_skb() is called, when dealing with fragmented frame, current rx_buf points to the *last* fragment, but copybreak needs to be done against the first one. That's where ice_rx_ring::first_desc helps. When frame building spans across NAPI polls (DD bit is not set on current descriptor and xdp->data is not NULL) with current Rx buffer handling state there might be some problems. Since calls to ice_put_rx_buf() were pulled out of the main Rx processing loop and were scoped from cached_ntc to current ntc, remember that now mentioned function relies on rx_buf->act, which is set within ice_run_xdp(). ice_run_xdp() is called when EOP bit was found, so currently we could put Rx buffer with rx_buf->act being *uninitialized*. To address this, change scoping to rely on first_desc on both boundaries instead. This also implies that cleaned_count which is used as an input to ice_alloc_rx_buffers() and tells how many new buffers should be refilled has to be adjusted. If it stayed as is, what could happen is a case where ntc would go over ntu. Therefore, remove cleaned_count altogether and use against allocing routine newly introduced ICE_RX_DESC_UNUSED() macro which is an equivalent of ICE_DESC_UNUSED() dedicated for Rx side and based on struct ice_rx_ring::first_desc instead of next_to_clean. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-11-maciej.fijalkowski@intel.com
2023-02-01ice: Use xdp->frame_sz instead of recalculating truesizeMaciej Fijalkowski1-24/+9
SKB path calculates truesize on three different functions, which could be avoided as xdp_buff carries the already calculated truesize under xdp_buff::frame_sz. If ice_add_rx_frag() is adjusted to take the xdp_buff as an input just like functions responsible for creating sk_buff initially, codebase could be simplified by removing these redundant recalculations and rely on xdp_buff::frame_sz instead. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-10-maciej.fijalkowski@intel.com
2023-02-01ice: Do not call ice_finalize_xdp_rx() unnecessarilyMaciej Fijalkowski1-1/+1
Currently ice_finalize_xdp_rx() is called only when xdp_prog is present on VSI, which is a good thing. However, this optimization can be enhanced and check only if any of the XDP_TX/XDP_REDIRECT took place in current Rx processing. Non-zero value of @xdp_xmit indicates that xdp_prog is present on VSI. This way XDP_DROP-based workloads will not suffer from unnecessary calls to external function. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-9-maciej.fijalkowski@intel.com
2023-02-01ice: Centrallize Rx buffer recyclingMaciej Fijalkowski1-38/+43
Currently calls to ice_put_rx_buf() are sprinkled through ice_clean_rx_irq() - first place is for explicit flow director's descriptor handling, second is after running XDP prog and the last one is after taking care of skb. 1st callsite was actually only for ntc bump purpose, as Rx buffer to be recycled is not even passed to a function. It is possible to walk through Rx buffers processed in particular NAPI cycle by caching ntc from beginning of the ice_clean_rx_irq(). To do so, let us store XDP verdict inside ice_rx_buf, so action we need to take on will be known. For XDP prog absence, just store ICE_XDP_PASS as a verdict. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-7-maciej.fijalkowski@intel.com
2023-02-01ice: Inline eop checkMaciej Fijalkowski1-21/+0
This might be in future used by ZC driver and might potentially yield a minor performance boost. While at it, constify arguments that ice_is_non_eop() takes, since they are pointers and this will help compiler while generating asm. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-6-maciej.fijalkowski@intel.com
2023-02-01ice: Pull out next_to_clean bump out of ice_put_rx_buf()Maciej Fijalkowski1-13/+16
Plan is to move ice_put_rx_buf() to the end of ice_clean_rx_irq() so in order to keep the ability of walking through HW Rx descriptors, pull out next_to_clean handling out of ice_put_rx_buf(). Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-5-maciej.fijalkowski@intel.com
2023-02-01ice: Store page count inside ice_rx_bufMaciej Fijalkowski1-16/+10
This will allow us to avoid carrying additional auxiliary array of page counts when dealing with XDP multi buffer support. Previously combining fragmented frame to skb was not affected in the same way as XDP would be as whole frame is needed to be in place before executing XDP prog. Therefore, when going through HW Rx descriptors one-by-one, calls to ice_put_rx_buf() need to be taken *after* running XDP prog on a potentially multi buffered frame, so some additional storage of page count is needed. By adding page count to rx buf, it will make it easier to walk through processed entries at the end of rx cleaning routine and decide whether or not buffers should be recycled. While at it, bump ice_rx_buf::pagecnt_bias from u16 up to u32. It was proven many times that calculations on variables smaller than standard register size are harmful. This was also the case during experiments with embedding page count to ice_rx_buf - when this was added as u16 it had a performance impact. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-4-maciej.fijalkowski@intel.com
2023-02-01ice: Add xdp_buff to ice_rx_ring structMaciej Fijalkowski1-16/+23
In preparation for XDP multi-buffer support, let's store xdp_buff on Rx ring struct. This will allow us to combine fragmented frames across separate NAPI cycles in the same way as currently skb fragments are handled. This means that skb pointer on Rx ring will become redundant and will be removed. For now it is kept and layout of Rx ring struct was not inspected, some member movement will be needed later on so that will be the time to take care of it. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-3-maciej.fijalkowski@intel.com
2023-02-01ice: Prepare legacy-rx for upcoming XDP multi-buffer supportMaciej Fijalkowski1-12/+5
Rx path is going to be modified in a way that fragmented frame will be gathered within xdp_buff in the first place. This approach implies that underlying buffer has to provide tailroom for skb_shared_info. This is currently the case when ring uses build_skb but not when legacy-rx knob is turned on. This case configures 2k Rx buffers and has no way to provide either headroom or tailroom - FWIW it currently has XDP_PACKET_HEADROOM which is broken and in here it is removed. 2k Rx buffers were used so driver in this setting was able to support 9k MTU as it can chain up to 5 Rx buffers. With offset configuring HW writing 2k of a data was passing the half of the page which broke the assumption of our internal page recycling tricks. Now if above got fixed and legacy-rx path would be left as is, when referring to skb_shared_info via xdp_get_shared_info_from_buff(), packet's content would be corrupted again. Hence size of Rx buffer needs to be lowered and therefore supported MTU. This operation will allow us to keep the unified data path and with 8k MTU users (if any of legacy-rx) would still be good to go. However, tendency is to drop the support for this code path at some point. Add ICE_RXBUF_1664 as vsi::rx_buf_len and ICE_MAX_FRAME_LEGACY_RX (8320) as vsi::max_frame for legacy-rx. For bigger page sizes configure 3k Rx buffers, not 2k. Since headroom support is removed, disable data_meta support on legacy-rx. When preparing XDP buff, rely on ice_rx_ring::rx_offset setting when deciding whether to support data_meta or not. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-2-maciej.fijalkowski@intel.com
2023-01-19ice: Remove cppcheck suppressionsTony Nguyen1-3/+0
The use of suppressions for cppcheck in the kernel does not look to be standard as the ice driver is the only one doing it. Remove the comments/suppressions. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Accumulate ring statistics over resetBenjamin Mikailenko1-14/+26
Resets may occur with or without user interaction. For example, a TX hang or reconfiguration of parameters will result in a reset. During reset, the VSI is freed, freeing any statistics structures inside as well. This would create an issue for the user where a reset happens in the background, statistics set to zero, and the user checks ring statistics expecting them to be populated. To ensure this doesn't happen, accumulate ring statistics over reset. Define a new ring statistics structure, ice_ring_stats. The new structure lives in the VSI's parent, preserving ring statistics when VSI is freed. 1. Define a new structure vsi_ring_stats in the PF scope 2. Allocate/free stats only during probe, unload, or change in ring size 3. Replace previous ring statistics functionality with new structure Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27ice: xsk: change batched Tx descriptor cleaningMaciej Fijalkowski1-1/+1
AF_XDP Tx descriptor cleaning in ice driver currently works in a "lazy" way - descriptors are not cleaned immediately after send. We rather hold on with cleaning until we see that free space in ring drops below particular threshold. This was supposed to reduce the amount of unnecessary work related to cleaning and instead of keeping the ring empty, ring was rather saturated. In AF_XDP realm cleaning Tx descriptors implies producing them to CQ. This is a way of letting know user space that particular descriptor has been sent, as John points out in [0]. We tried to implement serial descriptor cleaning which would be used in conjunction with batched cleaning but it made code base more convoluted and probably harder to maintain in future. Therefore we step away from batched cleaning in a current form in favor of an approach where we set RS bit on every last descriptor from a batch and clean always at the beginning of ice_xmit_zc(). This means that we give up a bit of Tx performance, but this doesn't hurt l2fwd scenario which is way more meaningful than txonly as this can be treaten as AF_XDP based packet generator. l2fwd is not hurt due to the fact that Tx side is much faster than Rx and Rx is the one that has to catch Tx up. FWIW Tx descriptors are still produced in a batched way. [0]: https://lore.kernel.org/bpf/62b0a20232920_3573208ab@john.notmuch/ Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+4
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficientLarysa Zaremba1-1/+4
The original patch added the static branch to handle the situation, when assigning an XDP TX queue to every CPU is not possible, so they have to be shared. However, in the XDP transmit handler ice_xdp_xmit(), an error was returned in such cases even before static condition was checked, thus making queue sharing still impossible. Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-16ice: track Tx timestamp stats similar to other Intel driversJacob Keller1-1/+3
Several Intel networking drivers which support PTP track when Tx timestamps are skipped or when they timeout without a timestamp from hardware. The conditions which could cause these events are rare, but it can be useful to know when and how often they occur. Implement similar statistics for the ice driver, tx_hwtstamp_skipped, tx_hwtstamp_timeouts, and tx_hwtstamp_flushed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix tunnel checksum offload with fragmented trafficPrzemyslaw Patynowski1-3/+5
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Offload params: td_offset, cd_tunnel_params were corrupted, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: 69e66c04c672 ("ice: Add mpls+tso support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-12ice: Add mpls+tso supportJoe Damato1-8/+21
Attempt to add mpls+tso support. I don't have ice hardware available to test myself, but I just implemented this feature in i40e and thought it might be useful to implement for ice while this is fresh in my brain. Hoping some one at intel will be able to test this on my behalf. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09ice: avoid XDP checks in ice_clean_tx_irq()Maciej Fijalkowski1-6/+1
Commit 9610bd988df9 ("ice: optimize XDP_TX workloads") introduced Tx IRQ cleaning routine dedicated for XDP rings. Currently it is impossible to call ice_clean_tx_irq() against XDP ring, so it is safe to drop ice_ring_is_xdp() calls in there. Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-03ice: store VF pointer instead of VF IDJacob Keller1-1/+1
The VSI structure contains a vf_id field used to associate a VSI with a VF. This is used mainly for ICE_VSI_VF as well as partially for ICE_VSI_CTRL associated with the VFs. This API was designed with the idea that VFs are stored in a simple array that was expected to be static throughout most of the driver's life. We plan on refactoring VF storage in a few key ways: 1) converting from a simple static array to a hash table 2) using krefs to track VF references obtained from the hash table 3) use RCU to delay release of VF memory until after all references are dropped This is motivated by the goal to ensure that the lifetime of VF structures is accounted for, and prevent various use-after-free bugs. With the existing vsi->vf_id, the reference tracking for VFs would become somewhat convoluted, because each VSI maintains a vf_id field which will then require performing a look up. This means all these flows will require reference tracking and proper usage of rcu_read_lock, etc. We know that the VF VSI will always be backed by a valid VF structure, because the VSI is created during VF initialization and removed before the VF is destroyed. Rely on this and store a reference to the VF in the VSI structure instead of storing a VF ID. This will simplify the usage and avoid the need to perform lookups on the hash table in the future. For ICE_VSI_VF, it is expected that vsi->vf is always non-NULL after ice_vsi_alloc succeeds. Because of this, use WARN_ON when checking if a vsi->vf pointer is valid when dealing with VF VSIs. This will aid in debugging code which violates this assumption and avoid more disastrous panics. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-10Merge branch '100GbE' of ↵David S. Miller1-9/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-02-09 This series contains updates to ice driver only. Brett adds support for QinQ. This begins with code refactoring and re-organization of VLAN configuration functions to allow for introduction of VSI VLAN ops to enable setting and calling of respective operations based on device support of single or double VLANs. Implementations are added for outer VLAN support. To support QinQ, the device must be set to double VLAN mode (DVM). In order for this to occur, the DDP package and NVM must also support DVM. Functions to determine compatibility and properly configure the device are added as well as setting the proper bits to advertise and utilize the proper offloads. Support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 is also included to allow for VF to negotiate and utilize this functionality. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-2/+4
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-02-09 We've added 126 non-merge commits during the last 16 day(s) which contain a total of 201 files changed, 4049 insertions(+), 2215 deletions(-). The main changes are: 1) Add custom BPF allocator for JITs that pack multiple programs into a huge page to reduce iTLB pressure, from Song Liu. 2) Add __user tagging support in vmlinux BTF and utilize it from BPF verifier when generating loads, from Yonghong Song. 3) Add per-socket fast path check guarding from cgroup/BPF overhead when used by only some sockets, from Pavel Begunkov. 4) Continued libbpf deprecation work of APIs/features and removal of their usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko and various others. 5) Improve BPF instruction set documentation by adding byte swap instructions and cleaning up load/store section, from Christoph Hellwig. 6) Switch BPF preload infra to light skeleton and remove libbpf dependency from it, from Alexei Starovoitov. 7) Fix architecture-agnostic macros in libbpf for accessing syscall arguments from BPF progs for non-x86 architectures, from Ilya Leoshkevich. 8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be of 16-bit field with anonymous zero padding, from Jakub Sitnicki. 9) Add new bpf_copy_from_user_task() helper to read memory from a different task than current. Add ability to create sleepable BPF iterator progs, from Kenny Yu. 10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski. 11) Generate temporary netns names for BPF selftests to avoid naming collisions, from Hangbin Liu. 12) Implement bpf_core_types_are_compat() with limited recursion for in-kernel usage, from Matteo Croce. 13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5 to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor. 14) Misc minor fixes to libbpf and selftests from various folks. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits) selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide libbpf: Fix compilation warning due to mismatched printf format selftests/bpf: Test BPF_KPROBE_SYSCALL macro libbpf: Add BPF_KPROBE_SYSCALL macro libbpf: Fix accessing the first syscall argument on s390 libbpf: Fix accessing the first syscall argument on arm64 libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390 libbpf: Fix accessing syscall arguments on riscv libbpf: Fix riscv register names libbpf: Fix accessing syscall arguments on powerpc selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro libbpf: Add PT_REGS_SYSCALL_REGS macro selftests/bpf: Fix an endianness issue in bpf_syscall_macro test bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE bpf: Fix leftover header->pages in sparc and powerpc code. libbpf: Fix signedness bug in btf_dump_array_data() selftests/bpf: Do not export subtest as standalone test bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures ... ==================== Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.