aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice_main.c
AgeCommit message (Collapse)AuthorFilesLines
2024-10-08ice: Flush FDB entries before resetWojciech Drewek1-21/+3
Triggering the reset while in switchdev mode causes errors[1]. Rules are already removed by this time because switch content is flushed in case of the reset. This means that rules were deleted from HW but SW still thinks they exist so when we get SWITCHDEV_FDB_DEL_TO_DEVICE notification we try to delete not existing rule. We can avoid these errors by clearing the rules early in the reset flow before they are removed from HW. Switchdev API will get notified that the rule was removed so we won't get SWITCHDEV_FDB_DEL_TO_DEVICE notification. Remove unnecessary ice_clear_sw_switch_recipes. [1] ice 0000:01:00.0: Failed to delete FDB forward rule, err: -2 ice 0000:01:00.0: Failed to delete FDB guard rule, err: -2 Fixes: 7c945a1a8e5f ("ice: Switchdev FDB events support") Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08ice: Fix netif_is_ice() in Safe ModeMarcin Szycik1-1/+2
netif_is_ice() works by checking the pointer to netdev ops. However, it only checks for the default ice_netdev_ops, not ice_netdev_safe_mode_ops, so in Safe Mode it always returns false, which is unintuitive. While it doesn't look like netif_is_ice() is currently being called anywhere in Safe Mode, this could change and potentially lead to unexpected behaviour. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08ice: Fix entering Safe ModeMarcin Szycik1-3/+1
If DDP package is missing or corrupted, the driver should enter Safe Mode. Instead, an error is returned and probe fails. To fix this, don't exit init if ice_init_ddp_config() returns an error. Repro: * Remove or rename DDP package (/lib/firmware/intel/ice/ddp/ice.pkg) * Load ice Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-30ice: fix memleak in ice_init_tx_topology()Przemek Kitszel1-7/+1
Fix leak of the FW blob (DDP pkg). Make ice_cfg_tx_topo() const-correct, so ice_init_tx_topology() can avoid copying whole FW blob. Copy just the topology section, and only when needed. Reuse the buffer allocated for the read of the current topology. This was found by kmemleak, with the following trace for each PF: [<ffffffff8761044d>] kmemdup_noprof+0x1d/0x50 [<ffffffffc0a0a480>] ice_init_ddp_config+0x100/0x220 [ice] [<ffffffffc0a0da7f>] ice_init_dev+0x6f/0x200 [ice] [<ffffffffc0a0dc49>] ice_init+0x29/0x560 [ice] [<ffffffffc0a10c1d>] ice_probe+0x21d/0x310 [ice] Constify ice_cfg_tx_topo() @buf parameter. This cascades further down to few more functions. Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology") CC: Larysa Zaremba <larysa.zaremba@intel.com> CC: Jacob Keller <jacob.e.keller@intel.com> CC: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> CC: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+0
Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09ice: stop calling pci_disable_device() as we use pcimPrzemek Kitszel1-2/+0
Our driver uses devres to manage resources, in particular we call pcim_enable_device(), what also means we express the intent to get automatic pci_disable_device() call at driver removal. Manual calls to pci_disable_device() misuse the API. Recent commit (see "Fixes" tag) has changed the removal action from conditional (silent ignore of double call to pci_disable_device()) to unconditional, but able to catch unwanted redundant calls; see cited "Fixes" commit for details. Since that, unloading the driver yields following warn+splat: [70633.628490] ice 0000:af:00.7: disabling already-disabled device [70633.628512] WARNING: CPU: 52 PID: 33890 at drivers/pci/pci.c:2250 pci_disable_device+0xf4/0x100 ... [70633.628744] ? pci_disable_device+0xf4/0x100 [70633.628752] release_nodes+0x4a/0x70 [70633.628759] devres_release_all+0x8b/0xc0 [70633.628768] device_unbind_cleanup+0xe/0x70 [70633.628774] device_release_driver_internal+0x208/0x250 [70633.628781] driver_detach+0x47/0x90 [70633.628786] bus_remove_driver+0x80/0x100 [70633.628791] pci_unregister_driver+0x2a/0xb0 [70633.628799] ice_module_exit+0x11/0x3a [ice] Note that this is the only Intel ethernet driver that needs such fix. Fixes: f748a07a0b64 ("PCI: Remove legacy pcim_release()") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: base subfunction aux driverPiotr Raczynski1-0/+10
Implement subfunction driver. It is probe when subfunction port is activated. VSI is already created. During the probe VSI is being configured. MAC unicast and broadcast filter is added to allow traffic to pass. Store subfunction pointer in VSI struct. The same is done for VF pointer. Make union of subfunction and VF pointer as only one of them can be set with one VSI. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: treat subfunction VSI the same as PF VSIMichal Swiatkowski1-2/+3
When subfunction VSI is open the same code as for PF VSI should be executed. Also when up is complete. Reflect that in code by adding subfunction VSI to consideration. In case of stopping, PF doesn't have additional tasks, so the same is with subfunction VSI. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: add basic devlink subfunctions supportPiotr Raczynski1-0/+7
Implement devlink port handlers responsible for ethernet type devlink subfunctions. Create subfunction devlink port and setup all resources needed for a subfunction netdev to operate. Configure new VSI for each new subfunction, initialize and configure interrupts and Tx/Rx resources. Set correct MAC filters and create new netdev. For now, subfunction is limited to only one Tx/Rx queue pair. Only allocate new subfunction VSI with devlink port new command. Allocate and free subfunction MSIX interrupt vectors using new API calls with pci_msix_alloc_irq_at and pci_msix_free_irq. Support both automatic and manual subfunction numbers. If no subfunction number is provided, use xa_alloc to pick a number automatically. This will find the first free index and use that as the number. This reduces burden on users in the simple case where a specific number is not required. It may also be slightly faster to check that a number exists since xarray lookup should be faster than a linear scan of the dyn_ports xarray. Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: export ice ndo_ops functionsPiotr Raczynski1-29/+6
Make some of the netdevice_ops functions visible from outside for another VSI type created netdev. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: add new VSI type for subfunctionsPiotr Raczynski1-2/+5
Add required plumbing for new VSI type dedicated to devlink subfunctions. Make sure that the vsi is properly configured and destroyed. Also allow loading XDP and AF_XDP sockets. The first implementation of devlink subfunctions supports only one Tx/Rx queue pair per given subfunction. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: do not bring the VSI up, if it was down before the XDP setupLarysa Zaremba1-2/+5
After XDP configuration is completed, we bring the interface up unconditionally, regardless of its state before the call to .ndo_bpf(). Preserve the information whether the interface had to be brought down and later bring it up only in such case. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: check for XDP rings instead of bpf program when unconfiguringLarysa Zaremba1-2/+2
If VSI rebuild is pending, .ndo_bpf() can attach/detach the XDP program on VSI without applying new ring configuration. When unconfiguring the VSI, we can encounter the state in which there is an XDP program but no XDP rings to destroy or there will be XDP rings that need to be destroyed, but no XDP program to indicate their presence. When unconfiguring, rely on the presence of XDP rings rather then XDP program, as they better represent the current state that has to be destroyed. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: protect XDP configuration with a mutexLarysa Zaremba1-5/+14
The main threat to data consistency in ice_xdp() is a possible asynchronous PF reset. It can be triggered by a user or by TX timeout handler. XDP setup and PF reset code access the same resources in the following sections: * ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked * ice_vsi_rebuild() for the PF VSI - not protected * ice_vsi_open() - already rtnl-locked With an unfortunate timing, such accesses can result in a crash such as the one below: [ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14 [ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18 [Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms [ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001 [ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14 [ +0.394718] ice 0000:b1:00.0: PTP reset successful [ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ +0.000045] #PF: supervisor read access in kernel mode [ +0.000023] #PF: error_code(0x0000) - not-present page [ +0.000023] PGD 0 P4D 0 [ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1 [ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000036] Workqueue: ice ice_service_task [ice] [ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice] [...] [ +0.000013] Call Trace: [ +0.000016] <TASK> [ +0.000014] ? __die+0x1f/0x70 [ +0.000029] ? page_fault_oops+0x171/0x4f0 [ +0.000029] ? schedule+0x3b/0xd0 [ +0.000027] ? exc_page_fault+0x7b/0x180 [ +0.000022] ? asm_exc_page_fault+0x22/0x30 [ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice] [ +0.000194] ice_free_tx_ring+0xe/0x60 [ice] [ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice] [ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice] [ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice] [ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [ +0.000145] ice_rebuild+0x18c/0x840 [ice] [ +0.000145] ? delay_tsc+0x4a/0xc0 [ +0.000022] ? delay_tsc+0x92/0xc0 [ +0.000020] ice_do_reset+0x140/0x180 [ice] [ +0.000886] ice_service_task+0x404/0x1030 [ice] [ +0.000824] process_one_work+0x171/0x340 [ +0.000685] worker_thread+0x277/0x3a0 [ +0.000675] ? preempt_count_add+0x6a/0xa0 [ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0.000679] ? __pfx_worker_thread+0x10/0x10 [ +0.000653] kthread+0xf0/0x120 [ +0.000635] ? __pfx_kthread+0x10/0x10 [ +0.000616] ret_from_fork+0x2d/0x50 [ +0.000612] ? __pfx_kthread+0x10/0x10 [ +0.000604] ret_from_fork_asm+0x1b/0x30 [ +0.000604] </TASK> The previous way of handling this through returning -EBUSY is not viable, particularly when destroying AF_XDP socket, because the kernel proceeds with removal anyway. There is plenty of code between those calls and there is no need to create a large critical section that covers all of them, same as there is no need to protect ice_vsi_rebuild() with rtnl_lock(). Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp(). Leaving unprotected sections in between would result in two states that have to be considered: 1. when the VSI is closed, but not yet rebuild 2. when VSI is already rebuild, but not yet open The latter case is actually already handled through !netif_running() case, we just need to adjust flag checking a little. The former one is not as trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of hardware interaction happens, this can make adding/deleting rings exit with an error. Luckily, VSI rebuild is pending and can apply new configuration for us in a managed fashion. Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to indicate that ice_xdp() can just hot-swap the program. Also, as ice_vsi_rebuild() flow is touched in this patch, make it more consistent by deconfiguring VSI when coalesce allocation fails. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: move netif_queue_set_napi to rtnl-protected sectionsLarysa Zaremba1-4/+13
Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] <TASK> [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154 Fixes: 080b0c8d6d26 ("ice: Fix ASSERT_RTNL() warning during certain scenarios") Fixes: 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-28ice: Add netif_device_attach/detach into PF reset flowDawid Osuchowski1-0/+7
Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net/<interface>/device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c <interface> BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: <TASK> ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner. Fixes: fcea6f3da546 ("ice: Add stats and ethtool support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07ice: Fix reset handlerGrzegorz Nitka1-0/+2
Synchronize OICR IRQ when preparing for reset to avoid potential race conditions between the reset procedure and OICR Fixes: 4aad5335969f ("ice: add individual interrupt allocation") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-29ice: improve updating ice_{t,r}x_ring::xsk_poolMaciej Fijalkowski1-1/+1
xsk_buff_pool pointers that ice ring structs hold are updated via ndo_bpf that is executed in process context while it can be read by remote CPU at the same time within NAPI poll. Use synchronize_net() after pointer update and {READ,WRITE}_ONCE() when working with mentioned pointer. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-11ice: remove eswitch rebuildMichal Swiatkowski1-2/+0
Since the port representors are added one by one there is no need to do eswitch rebuild. Each port representor is detached and attached in VF reset path. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen1-1/+0
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-28ice: Distinguish driver reset and removal for AQ shutdownPiotr Gardocki1-3/+3
Admin queue command for shutdown AQ contains a flag to indicate driver unload. However, the flag is always set in the driver, even for resets. It can cause the firmware to consider driver as unloaded once the PF reset is triggered on all ports of device, which could lead to unexpected results. Add an additional function parameter to functions that shutdown AQ, indicating whether the driver is actually unloading. Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-28ice: Check all ice_vsi_rebuild() errors in functionEric Joyner1-2/+11
Check the return value from ice_vsi_rebuild() and prevent the usage of incorrectly configured VSI. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Eric Joyner <eric.joyner@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+9
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-23ice: Rebuild TC queues on VSI queue reconfigurationJan Sokolowski1-1/+9
TC queues needs to be correctly updated when the number of queues on a VSI is reconfigured, so netdev's queue and TC settings will be dynamically adjusted and could accurately represent the underlying hardware state after changes to the VSI queue counts. Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+9
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c 1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error") 165f87691a89 ("bnxt_en: add timestamping statistics support") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13ice: fix 200G link speed message logPaul Greenwalt1-0/+3
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include 200G link speed message support. As a result the driver incorrectly reports Unknown for 200G link speed. Fix this by adding 200G support to ice_print_link_msg(). Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13ice: avoid IRQ collision to fix init failure on ACPI S3 resumeEn-Wei Wu1-1/+6
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes that irdma would break and report hardware initialization failed after suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5). The problem is caused due to the collision between the irq numbers requested in irdma and the irq numbers requested in other drivers after suspend/resume. The irq numbers used by irdma are derived from ice's ice_pf->msix_entries which stores mappings between MSI-X index and Linux interrupt number. It's supposed to be cleaned up when suspend and rebuilt in resume but it's not, causing irdma using the old irq numbers stored in the old ice_pf->msix_entries to request_irq() when resume. And eventually collide with other drivers. This patch fixes this problem. On suspend, we call ice_deinit_rdma() to clean up the ice_pf->msix_entries (and free the MSI-X vectors used by irdma if we've dynamically allocated them). On resume, we call ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the MSI-X vectors if we would like to dynamically allocate them). Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Tested-by: Cyrus Lien <cyrus.lien@canonical.com> Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-10ice: use irq_update_affinity_hint()Michal Schmidt1-2/+2
irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint() instead. This removes the side-effect of actually applying the affinity. The driver does not really need to worry about spreading its IRQs across CPUs. The core code already takes care of that. On the contrary, when the driver applies affinities by itself, it breaks the users' expectations: 1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in order to prevent IRQs from being moved to certain CPUs that run a real-time workload. 2. ice reconfigures VSIs at runtime due to a MIB change (ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the affinity in ice_vsi_req_irq_msix(). 3. ice has no idea about irqbalance's config, so it may move an IRQ to a banned CPU. The real-time workload suffers unacceptable latency. I am not sure if updating the affinity hints is at all useful, because irqbalance ignores them since 2016 ([1]), but at least it's harmless. This ice change is similar to i40e commit d34c54d1739c ("i40e: Use irq_update_affinity_hint()"). [1] https://github.com/Irqbalance/irqbalance/commit/dcc411e7bfdd Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-3-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05ice: map XDP queues to vectors in ice_vsi_map_rings_to_vectors()Larysa Zaremba1-39/+57
ice_pf_dcb_recfg() re-maps queues to vectors with ice_vsi_map_rings_to_vectors(), which does not restore the previous state for XDP queues. This leads to no AF_XDP traffic after rebuild. Map XDP queues to vectors in ice_vsi_map_rings_to_vectors(). Also, move the code around, so XDP queues are mapped independently only through .ndo_bpf(). Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05ice: add flag to distinguish reset from .ndo_bpf in XDP rings configLarysa Zaremba1-10/+12
Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in the rebuild process. The behaviour of the XDP rings config functions is context-dependent, so the change of order has led to ice_destroy_xdp_rings() doing additional work and removing XDP prog, when it was supposed to be preserved. Also, dependency on the PF state reset flags creates an additional, fortunately less common problem: * PFR is requested e.g. by tx_timeout handler * .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(), but reset flag is set, so rings are destroyed without deleting the program * ice_vsi_rebuild tries to delete non-existent XDP rings, because the program is still on the VSI * system crashes With a similar race, when requested to attach a program, ice_prepare_xdp_rings() can actually skip setting the program in the VSI and nevertheless report success. Instead of reverting to the old order of function calls, add an enum argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in order to distinguish between calls from rebuild and .ndo_bpf(). Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07Merge branch '100GbE' of ↵Jakub Kicinski1-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-05-06 (ice) This series contains updates to ice driver only. Paul adds support for additional E830 devices and adjusts naming for existing E830 devices. Marcin commonizes a couple of TC setup calls to reduce duplicated code. Mateusz adds ice_vsi_cfg_params into ice_vsi to consolidate info. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsi ice: Deduplicate tc action setup ice: update E830 device ids and comments ice: add additional E830 device ids ==================== Link: https://lore.kernel.org/r/20240506170827.948682-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet1-1/+1
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsiMateusz Polchlopek1-4/+4
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi. Prior to that the members of the struct were scattered around ice_vsi, and were copy-pasted for purposes of reinit. Now we have struct handy, and it is easier to have something sticky in the flags field. Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vaishnavi Tipireddy <vaishnavi.tipireddy@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: update E830 device ids and commentsPaul Greenwalt1-4/+4
Update existing E830 device ids and comments to align with new naming 'C' for 100G and 'CC' for 200G. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: add additional E830 device idsPaul Greenwalt1-0/+6
Add support for additional E830 device ids which are supported by the driver: - 0x12D5: Intel(R) Ethernet Controller E830-C for backplane - 0x12D8: Intel(R) Ethernet Controller E830-C for QSFP - 0x12DA: Intel(R) Ethernet Controller E830-C for SFP - 0x12DC: Intel(R) Ethernet Controller E830-XXV for backplane - 0x12DD: Intel(R) Ethernet Controller E830-XXV for QSFP - 0x12DE: Intel(R) Ethernet Controller E830-XXV for SFP Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-25Merge branch '40GbE' of ↵Jakub Kicinski1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== net: intel: start The Great Code Dedup + Page Pool for iavf Alexander Lobakin says: Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and libie) and switch iavf to Page Pool. Details are in the commit messages; here's a summary: Not a secret there's a ton of code duplication between two and more Intel ethernet modules. Before introducing new changes, which would need to be copied over again, start decoupling the already existing duplicate functionality into a new module, which will be shared between several Intel Ethernet drivers. The first name that came to my mind was "libie" -- "Intel Ethernet common library". Also this sounds like "lovelie" (-> one word, no "lib I E" pls) and can be expanded as "lib Internet Explorer" :P The "generic", pure-software part is placed separately, so that it can be easily reused in any driver by any vendor without linking to the Intel pre-200G guts. In a few words, it's something any modern driver does the same way, but nobody moved it level up (yet). The series is only the beginning. From now on, adding every new feature or doing any good driver refactoring will remove much more lines than add for quite some time. There's a basic roadmap with some deduplications planned already, not speaking of that touching every line now asks: "can I share this?". The final destination is very ambitious: have only one unified driver for at least i40e, ice, iavf, and idpf with a struct ops for each generation. That's never gonna happen, right? But you still can at least try. PP conversion for iavf lands within the same series as these two are tied closely. libie will support Page Pool model only, so that a driver can't use much of the lib until it's converted. iavf is only the example, the rest will eventually be converted soon on a per-driver basis. That is when it gets really interesting. Stay tech. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: MAINTAINERS: add entry for libeth and libie iavf: switch to Page Pool iavf: pack iavf_ring more efficiently libeth: add Rx buffer management page_pool: add DMA-sync-for-CPU inline helper page_pool: constify some read-only function arguments slab: introduce kvmalloc_array_node() and kvcalloc_node() iavf: drop page splitting and recycling iavf: kill "legacy-rx" for good net: intel: introduce {, Intel} Ethernet common library ==================== Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: intel: introduce {, Intel} Ethernet common libraryAlexander Lobakin1-0/+1
Not a secret there's a ton of code duplication between two and more Intel ethernet modules. Before introducing new changes, which would need to be copied over again, start decoupling the already existing duplicate functionality into a new module, which will be shared between several Intel Ethernet drivers. Add the lookup table which converts 8/10-bit hardware packet type into a parsed bitfield structure for easy checking packet format parameters, such as payload level, IP version, etc. This is currently used by i40e, ice and iavf and it's all the same in all three drivers. The only difference introduced in this implementation is that instead of defining a 256 (or 1024 in case of ice) element array, add unlikely() condition to limit the input to 154 (current maximum non-reserved packet type). There's no reason to waste 600 (or even 3600) bytes only to not hurt very unlikely exception packets. The hash computation function now takes payload level directly as a pkt_hash_type. There's a couple cases when non-IP ptypes are marked as L3 payload and in the previous versions their hash level would be 2, not 3. But skb_set_hash() only sees difference between L4 and non-L4, thus this won't change anything at all. The module is behind the hidden Kconfig symbol, which the drivers will select when needed. The exports are behind 'LIBIE' namespace to limit the scope of the functions. Not that non-HW-specific symbols will live in yet another module, libeth. This is done to easily distinguish pretty generic code ready for reusing by any other vendor and/or for moving the layer up from the code useful in Intel's 1-100G drivers only. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-22ice: Enable switching default Tx scheduler topologyMichal Wilczynski1-19/+89
Introduce support for Tx scheduler topology change, based on user selection, from default 9-layer to 5-layer. Change requires NVM (version 3.20 or newer) and DDP package (OS Package 1.3.30 or newer - available for over a year in linux-firmware, since commit aed71f296637 in linux-firmware ("ice: Update package to 1.3.30.0")) https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=aed71f296637 Enable 5-layer topology switch in init path of the driver. To accomplish that upload of the DDP package needs to be delayed, until change in Tx topology is finished. To trigger the Tx change user selection should be changed in NVM using devlink. Then the platform should be rebooted. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-17ice: Add automatic VF reset on Tx MDD eventsMarcin Szycik1-11/+46
In cases when VF sends malformed packets that are classified as malicious, it can cause Tx queue to freeze as a result of Malicious Driver Detection event. Such malformed packets can appear as a result of a faulty userspace app running on VF. This frozen queue can be stuck for several minutes being unusable. User might prefer to immediately bring the VF back to operational state after such event, which can be done by automatically resetting the VF which caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf flag private flag needs to be set). Extend the VF auto reset to also cover Tx MDD events. When any MDD event occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set, perform a graceful VF reset to quickly bring it back to operational state. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Liang-Min Wang <liang-min.wang@intel.com> Signed-off-by: Liang-Min Wang <liang-min.wang@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-02Merge branch '100GbE' of ↵Jakub Kicinski1-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-01 (ice) This series contains updates to ice driver only. Michal Schmidt changes flow for gettimex64 to use host-side spinlock rather than hardware semaphore for lighter-weight locking. Steven adds ability for switch recipes to be re-used when firmware supports it. Thorsten Blum removes unwanted newlines in netlink messaging. Michal Swiatkowski and Piotr re-organize devlink related code; renaming, moving, and consolidating it to a single location. Michal also simplifies the devlink init and cleanup path to occur under a single lock call. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: hold devlink lock for whole init/cleanup ice: move devlink port code to a separate file ice: move ice_devlink.[ch] to devlink folder ice: Remove newlines in NL_SET_ERR_MSG_MOD ice: Add switch recipe reusing feature ice: fold ice_ptp_read_time into ice_ptp_gettimex64 ice: avoid the PTP hardware semaphore in gettimex64 path ice: add ice_adapter for shared data across PFs on the same NIC ==================== Link: https://lore.kernel.org/r/20240401172421.1401696-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01Merge branch '1GbE' of ↵Jakub Kicinski1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-29 (net: intel) This series contains updates to most Intel drivers. Jesse moves declaration of pci_driver struct to remove need for forward declarations in igb and converts Intel drivers to user newer power management ops. Sasha reworks power management flow on igc to avoid using rtnl_lock() during those flows. Maciej reorganizes i40e_nvm file to avoid forward declarations. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: avoid forward declarations in i40e_nvm.c igc: Refactor runtime power management flow net: intel: implement modern PM ops declarations igb: simplify pci ops declaration ==================== Link: https://lore.kernel.org/r/20240329175632.211340-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01ice: hold devlink lock for whole init/cleanupMichal Swiatkowski1-4/+3
Simplify devlink lock code in driver by taking it for whole init/cleanup path. Instead of calling devlink functions that taking lock call the lockless versions. Suggested-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: move devlink port code to a separate filePiotr Raczynski1-0/+1
Keep devlink related code in a separate file. More devlink port code and handlers will be added here for other port operations. Remove no longer needed include of our devlink.h in ice_lib.c. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: move ice_devlink.[ch] to devlink folderMichal Swiatkowski1-1/+1
Only moving whole files, fixing Makefile and bunch of includes. Some changes to ice_devlink file was done even in representor part (Tx topology), so keep it as final patch to not mess up with rebasing. After moving to devlink folder there is no need to have such long name for these files. Rename them to simple devlink. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: add ice_adapter for shared data across PFs on the same NICMichal Schmidt1-0/+8
There is a need for synchronization between ice PFs on the same physical adapter. Add a "struct ice_adapter" for holding data shared between PFs of the same multifunction PCI device. The struct is refcounted - each ice_pf holds a reference to it. Its first use will be for PTP. I expect it will be useful also to improve the ugliness that is ice_prot_id_tbl. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-29netlink: introduce type-checking attribute iterationJohannes Berg1-5/+2
There are, especially with multi-attr arrays, many cases of needing to iterate all attributes of a specific type in a netlink message or a nested attribute. Add specific macros to support that case. Also convert many instances using this spatch: @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } Although I had to undo one bad change this made, and I also adjusted some other code for whitespace and to use direct variable initialization now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29net: intel: implement modern PM ops declarationsJesse Brandeburg1-8/+4
Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: remove switchdev control plane VSIMichal Swiatkowski1-8/+2
For slow-path Rx and Tx PF VSI is used. There is no need to have control plane VSI. Remove all code related to it. Eswitch rebuild can't fail without rebuilding control plane VSI. Return void from ice_eswitch_rebuild(). Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-13/+11
Merge in late fixes to prepare for the 6.9 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+2
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.