aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000
AgeCommit message (Collapse)AuthorFilesLines
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen1-1/+0
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <[email protected]> Acked-by: Alexander Lobakin <[email protected]> # libeth, libie Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-06-10net: intel: Use *-y instead of *-objs in MakefileAndy Shevchenko1-1/+1
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Reviewed-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet1-1/+1
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Simon Horman <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29net: intel: implement modern PM ops declarationsJesse Brandeburg1-8/+6
Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-18intel: legacy: field get conversionJesse Brandeburg1-26/+19
Refactor several older Intel drivers to use FIELD_GET(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @get@ constant shift,mask; type T; expression a; @@ ( -((T)((a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <[email protected]> CC: Alexander Lobakin <[email protected]> Reviewed-by: Marcin Szycik <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-18intel: add bit macro includes where neededJesse Brandeburg1-0/+1
This series is introducing the use of FIELD_GET and FIELD_PREP which requires bitfield.h to be included. Fix all the includes in this one change, and rearrange includes into alphabetical order to ease readability and future maintenance. virtchnl.h and it's usage was modified to have it's own includes as it should. This required including bits.h for virtchnl.h. Reviewed-by: Marcin Szycik <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-10-18e1000: replace deprecated strncpy with strscpyJustin Stitt1-1/+1
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We can see that netdev->name is expected to be NUL-terminated based on it's usage with format strings: | pr_info("%s NIC Link is Down\n", | netdev->name); A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. This is in line with other uses of strscpy on netdev->name: $ rg "strscpy\(netdev\->name.*pci.*" drivers/net/ethernet/intel/e1000e/netdev.c 7455: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); drivers/net/ethernet/intel/ixgbe/ixgbe_main.c 10839: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-13net: e1000: Remove unused declarationsYue Haibing2-4/+0
Commit 675ad47375c7 ("e1000: Use netdev_<level>, pr_<level> and dev_<level>") declared but never implemented e1000_get_hw_dev_name(). Commit 1532ecea1deb ("e1000: drop dead pcie code from e1000") removed e1000_check_mng_mode()/e1000_blink_led_start() but not the declarations. Commit c46b59b241ec ("e1000: Remove unused function e1000_mta_set.") removed e1000_mta_set() but not its declaration. Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-02e1000: Remove unnecessary use of kmap_atomic()Anirudh Venkataramanan1-6/+3
buffer_info->rxbuf.page accessed in e1000_clean_jumbo_rx_irq() is allocated using GFP_ATOMIC. Pages allocated with GFP_ATOMIC can't come from highmem and so there's no need to kmap() them. Just use page_address(). I don't have access to a 32-bit system so did some limited testing on qemu (qemu-system-i386 -m 4096 -smp 4 -device e1000e) with a 32-bit Debian 11.04 image. Cc: Ira Weiny <[email protected]> Cc: Fabio M. De Francesco <[email protected]> Cc: Jesse Brandeburg <[email protected]> Cc: Tony Nguyen <[email protected]> Suggested-by: Ira Weiny <[email protected]> Suggested-by: Fabio M. De Francesco <[email protected]> Signed-off-by: Anirudh Venkataramanan <[email protected]> Reviewed-by: Ira Weiny <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-1/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <[email protected]> # for CAN Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang1-2/+2
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Petr Machata <[email protected]> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <[email protected]> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <[email protected]> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <[email protected]> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <[email protected]> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <[email protected]> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <[email protected]> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet1-2/+2
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-30intel/e1000:fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'frames'. Signed-off-by: Jilin Yuan <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-30intel: remove unused macrosJesse Brandeburg1-2/+0
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-09e1000: Fix typos in commentsJiaqing Zhao1-2/+2
"VLAN filter" was misspelled as "VLAN filer" in some comments. Signed-off-by: Jiaqing Zhao <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-28e1000: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx element. e1000 driver runs Tx completion polling cycle right before the Rx one. Now that e1000 uses napi_consume_skb() to put skbuff_heads of completed entries into the cache, it will never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx and increase throughput. Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-28e1000: switch to napi_consume_skb()Alexander Lobakin1-5/+7
In order to take the best from per-cpu NAPI skbuff_head caches and CPU cycles, let's switch from dev_kfree_skb_any(), which passes skb back to the mm layer, to napi_consume_skb(), which feeds those caches on non-zero budget instead (falls back to the former on 0). Do the replacement in e1000_unmap_and_free_tx_resource(). There are 4 call sites of this function throughout the driver: * e1000_clean_tx_ring(). Slowpath, process context, cleans the whole Tx ring on ifdown. Use budget of 0 here; * e1000_tx_map(). Hotpath, net Tx softirq, unmaps the buffers in case of error. Use 0 as well; * e1000_clean_tx_irq(). Hotpath, NAPI Tx completion polling cycle. As the driver doesn't count completed Tx entries towards the NAPI budget, just use the poll budget of 64 to utilize caches. Apart from being a preparation for switching to napi_build_skb(), this is useful on its own as well, as napi_consume_skb() flushes skb caches by batches of 32 instead of one-at-a-time. Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-2/+6
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski1-2/+2
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-2/+6
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <[email protected]> Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jay Vosburgh <[email protected]> Cc: Veaceslav Falico <[email protected]> Cc: Andy Gospodarek <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Vivien Didelot <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Vladimir Oltean <[email protected]> Cc: Leon Romanovsky <[email protected]> Cc: [email protected] Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Jason Gunthorpe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-05-26intel: remove checker warningJesse Brandeburg1-1/+1
The sparse checker (C=2) found an assignment where we were mixing types when trying to convert from data read directly from the device NVM, to an array in CPU order in-memory, which unfortunately the driver tries to do in-place. This is easily solved by using the swap operation instead of an assignment, and is already proven in other Intel drivers to be functionally correct and the same code, just without a sparse warning. The change is the same in all three drivers. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Dave Switzer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-05-19net: e1000: remove repeated words for e1000_hw.cHao Chen1-2/+2
There are double "in" and "to" in comments, so remove the redundant one. Signed-off-by: Hao Chen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-05-19net: e1000: remove repeated word "slot" for e1000_main.cHao Chen1-1/+1
There are double "slot" in comment, so remove the redundant one. Signed-off-by: Hao Chen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-23e1000: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-02-03e1000: drop unneeded assignment in e1000_set_itr()Sudip Mukherjee1-1/+0
The variable 'current_itr' is assigned to 0 before jumping to 'set_itr_now' but it has not been used after the jump. So, remove the unneeded assignment. Signed-off-by: Sudip Mukherjee <[email protected]> Reviewed-by: Lukas Bulwahn <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-10-13e1000: remove unused and incorrect codeJesse Brandeburg1-9/+1
The e1000_clear_vfta function was triggering a warning in kbuild-bot testing. It's actually a bug but has no functional impact. drivers/net/ethernet/intel/e1000/e1000_hw.c:4415:58: warning: Same expression in both branches of ternary operator. [duplicateExpressionTernary] Fix this warning by removing the offending code and simplifying the routine to do exactly what it did before, no functional change. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-09-29net: intel: Remove in_interrupt() warningsSebastian Andrzej Siewior1-1/+0
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the checks cover only parts of the contexts in which these functions cannot be called. They fail to detect preemption or interrupt disabled invocations. As the functions which are invoked from the various places contain already a broad variety of checks (always enabled or debug option dependent) cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-25intel: handle unused assignmentsJesse Brandeburg1-74/+65
Remove variables that were storing a return value from a register read or other read, where the return value wasn't used. Those conversions to remove the lvalue of the assignment should be safe because the readl memory mapped reads are marked volatile and should not be optimized out without an lvalue (I suspect a very long time ago this wasn't guaranteed as it is today). These changes are part of a separate patch to make it easier to review. Warnings Fixed: .../intel/e100.c:2596:9: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] .../intel/ixgb/ixgb_hw.c:101:6: warning: variable ‘icr_reg’ set but not used [-Wunused-but-set-variable] .../intel/ixgb/ixgb_hw.c:277:6: warning: variable ‘ctrl_reg’ set but not used [-Wunused-but-set-variable] .../intel/ixgb/ixgb_hw.c:952:15: warning: variable ‘temp_reg’ set but not used [-Wunused-but-set-variable] .../intel/ixgb/ixgb_hw.c:1164:7: warning: variable ‘mdio_reg’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:132:6: warning: variable ‘ret_val’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:380:6: warning: variable ‘icr’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:2378:6: warning: variable ‘signal’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:2374:6: warning: variable ‘ctrl’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:2373:6: warning: variable ‘rxcw’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:4678:15: warning: variable ‘temp’ set but not used [-Wunused-but-set-variable] Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-25intel-ethernet: clean up W=1 warnings in kdocJesse Brandeburg2-20/+26
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-19net: e1000: Remove set but not used variableZheng Yongjun1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/intel/e1000/e1000_hw.c: In function e1000_phy_init_script: drivers/net/ethernet/intel/e1000/e1000_hw.c:132:6: warning: variable ‘ret_val’ set but not used [-Wunused-but-set-variable] `ret_val` is never used, so remove it. Signed-off-by: Zheng Yongjun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-30e1000: Remove unnecessary usages of memsetSuraj Upadhyay1-2/+2
Replace memsets of 1 byte with simple assignments. Issue reported by checkpatch.pl. Signed-off-by: Suraj Upadhyay <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher3-5/+4
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher3-7/+1
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <[email protected]> CC: Jesse Brandeburg <[email protected]> CC: Alek Loktionov <[email protected]> CC: Kevin Liedtke <[email protected]> CC: Aaron Rowden <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Co-developed-by: Jacob Keller <[email protected]> Tested-by: Aaron Brown <[email protected]>
2020-06-16e1000: use generic power managementVaibhav Gupta1-36/+13
With legacy PM hooks, it was the responsibility of a driver to manage PCI states and also the device's power state. The generic approach is to let PCI core handle the work. e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks. __e1000_shutdown() modifies the value of "wake" (device should be wakeup enabled or not), responsible for controlling the flow of legacy PM. Since, PCI core has no idea about the value of "wake", new code for generic PM may produce unexpected results. Thus, use "device_set_wakeup_enable()" to wakeup-enable the device accordingly. Signed-off-by: Vaibhav Gupta <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-28e1000: Fix typo in the commentHari1-1/+1
Continuous Double "the" in a comment. Changed it to single "the" Signed-off-by: Hari <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-21e1000: Do not perform reset in reset_task if we are already downAlexander Duyck1-4/+14
We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking over the kernel function trace of the system it appears that the interface is being closed and then a reset is hitting which deadlocks the interface as the NAPI interface is already disabled. To prevent this from happening I am disabling the reset task when __E1000_DOWN is already set. In addition code has been added so that we set the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in order to guarantee that the reset task will not run after we have started the close call. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Maxim Zhukov <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Simple overlapping changes to linux/vermagic.h Signed-off-by: David S. Miller <[email protected]>
2020-04-21e1000: remove unneeded conversion to boolJason Yan1-1/+1
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/net/ethernet/intel/e1000/e1000_main.c:1479:44-49: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-17e1000: Distribute switch variables for initializationKees Cook1-1/+3
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’: drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable] 3143 | unsigned int pull_size; | ^~~~~~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-03-12net: e1000: reject unsupported coalescing paramsJakub Kicinski1-0/+1
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-19e1000(e): use new helper tcp_v6_gso_csum_prepHeiner Kallweit1-5/+1
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-2/+2
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Heiner Kallweit <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Acked-by: Shannon Nelson <[email protected]> Reviewed-by: Martin Habets <[email protected]> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <[email protected]>
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-11-07net: ethernet: intel: Demote MTU change prints to debugFlorian Fainelli1-2/+2
Changing a network device MTU can be a fairly frequent operation, and failure to change the MTU is reflected to user-space properly, both by an appropriate message as well as by looking at whether the device's MTU matches the configuration. Demote the prints to debug prints by using netdev_dbg(), making all Intel wired LAN drivers consistent, since they used a mixture of PCI device and network device prints before. Signed-off-by: Florian Fainelli <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-01e1000: fix memory leaksWenwen Wang1-4/+3
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if e1000_up() fails, leading to memory leaks. Refactor the code to fix this issue. Signed-off-by: Wenwen Wang <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov2-2/+1
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Denis Efremov <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Sebastian Ott <[email protected]> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <[email protected]> # video/fbdev/ Acked-by: Gustavo Pimentel <[email protected]> # pci/controller/dwc/ Acked-by: Jack Wang <[email protected]> # scsi/pm8001/ Acked-by: Martin K. Petersen <[email protected]> # scsi/pm8001/ Acked-by: Ulf Hansson <[email protected]> # memstick/
2019-08-22ethernet: Delete unnecessary checks before the macro call “dev_kfree_skb”Markus Elfring2-4/+2
The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)1-2/+1
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-28e1000: Use dma_wmb() instead of wmb() before doorbell writesVenkatesh Srinivas1-3/+3
e1000 writes to doorbells to post transmit descriptors and fill the receive ring. After writing descriptors to memory but before writing to doorbells, use dma_wmb() rather than wmb(). wmb() is more heavyweight than necessary for a device to see descriptor writes. On x86, this avoids SFENCEs before doorbell writes in both the Tx and Rx paths. On ARM, this converts DSB ST -> DMB OSHST. Tested: 82576EB / x86; QEMU (qemu emulates an 8257x) Signed-off-by: Venkatesh Srinivas <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.