aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2024-08-30arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6Konrad Dybcio1-0/+1
Add support for the aforementioned laptop. That includes: - input methods, incl. lid switch (keyboard needs the pdc wakeup-parent removal hack..) - NVMe, WiFi - USB-C ports - GPU, display - DSPs Notably, the USB-A ports on the side are depenedent on the USB multiport controller making it upstream. At least one of the eDP panels used (non-touchscreen) identifies as BOE 0x0b66. See below for the hardware description from the OEM. Link: https://www.lenovo.com/us/en/p/laptops/thinkpad/thinkpadt/lenovo-thinkpad-t14s-gen-6-(14-inch-snapdragon)/len101t0099 Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-08-26arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devicesKonrad Dybcio1-0/+2
Add support for Surface Laptop 7 machines, based on X1E80100. The feature status is mostly on par with other X Elite machines, notably lacking: - USB-A and probably USB-over-Surface-connector (pending NXP retimer support) - SD card reader (Realtek RTS5261 connected over PCIe) - Touchscreen and touchpad support (hid-over-SPI [1]) - Audio (a quick look suggests the setup is very close to the one in X1E CRD) The two Surface Laptop 7 SKUs (13.8" and 15") only have very minor differences, amounting close to none on the software side. Even the MBN firmware files and ACPI tables are shared between the two machines. With that in mind, support is added for both, although only the larger one was physically tested. Display differences will be taken care of through fused-in EDID and other matters should be solved within the EC and boot firmware. [1] https://www.microsoft.com/en-us/download/details.aspx?id=103325 Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-08-14arm64: dts: qcom: msm8916-samsung-j3ltetw: Add initial device treeLin, Meng-Bo1-0/+1
The dts and dtsi add support for msm8916 variant of Samsung Galaxy J3 SM-J320YZ smartphone released in 2016. Add a device tree for SM-J320YZ with initial support for: - GPIO keys - SDHCI (internal and external storage) - USB Device Mode - UART (on USB connector via the SM5703 MUIC) - WCNSS (WiFi/BT) - Regulators - QDSP6 audio - Speaker/earpiece/headphones/microphones via digital/analog codec in MSM8916/PM8916 - WWAN Internet via BAM-DMUX - Touchscreen - Accelerometer There are different variants of J3, with some differences in MUIC, sensor, NFC and touch key I2C buses. The common parts are shared in msm8916-samsung-j3-common.dtsi to reduce duplication. Signed-off-by: Lin, Meng-Bo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-30arm64: dts: qcom: msm8939-wingtech-wt82918: Add Lenovo Vibe K5 devicesAdam Słaboń1-0/+3
This commit introduces multiple hardware variants of Lenovo Vibe K5. - A6020a40 (msm8929-wingtech-wt82918hd) - A6020a46/A6020l36 (msm8939-wingtech-wt82918) - A6020a40 S616 H39 (msm8939-wingtech-wt82918hd) These devices are added with support for many features, notably: - Basic features like USB, mmc/sd storage, wifi, buttons, leds; - Accelerometer; - Touchscreen; - Sound and modem. Note that "HD" variant of K5 is based on msm8929 which is a lower bin of msm8939 SoC. A simple dtsi is added for this soc along with the new devices. Unfortunately, despite the heavy similarities, the combination of minor differences between variants make them incompatible between each other. Signed-off-by: Adam Słaboń <[email protected]> [Nikita: Minor cleanup, commit message] Signed-off-by: Nikita Travkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-30arm64: dts: qcom: msm8916-wingtech-wt865x8: Add Lenovo A6000/A6010Anton Bambura1-0/+2
Add initial device-tree for Lenovo A6000 (wt86518) and Lenovo A6010 (wt86528), which are MSM8916-based devices. These devices are quite similar, so some configuration is shared in msm8916-wingtech-wt865x8.dtsi. Lenovo A6000 (wt86518): - storage (eMMC and uSD card); - usb in peripheral mode; - touchscreen; - sensors; - WiFi/BT; - keys; - battery and charger. Lenovo A6010 (wt86528): - storage (eMMC and uSD card); - usb with extcon; - touchscreen; - sensors; - WiFi/BT; - keys; - leds; - battery; Signed-off-by: Anton Bambura <[email protected]> Co-developed-by: Stephan Gerhold <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> [Nikita: minor cleanup] Signed-off-by: Nikita Travkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-30arm64: dts: qcom: msm8992-lg-h815: Initial support for LG G4 (H815)Alexander Reimelt1-0/+1
To make it easier for downstream projects and avoid duplication of work. Makes the device bootable and enables all buttons, hall sensor, eMMC and SD-Card. Signed-off-by: Alexander Reimelt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTEAnton Bambura1-0/+1
Add initial device-tree for LG Leon LTE (lg-c50), currently supported features: - eMMC; - MicroSD; - usb in peripheral mode; - WiFi/BT; - vibration; - keys. Signed-off-by: Anton Bambura <[email protected]> Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: msm8916-lg-m216: Add initial device treeCristian Cozzolino1-0/+1
This commit adds initial support for the LG K10 smartphone. Support for the following features is included: - Serial - Keys - Battery and charger - Accelerometer, magnetometer - Touchscreen - Sound and modem - Haptic Signed-off-by: Cristian Cozzolino <[email protected]> [Nikita: Minor cleanup] Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetreeSrinivas Kandagatla1-0/+1
Add an initial devicetree for the Lenovo Yoga slim 7x with support for Display, usb, keyboard, touchpad, touchscreen, PMICs, speaker audio, gpu, NVMe and remoteprocs. Signed-off-by: Srinivas Kandagatla <[email protected]> Tested-by: Rob Clark <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-02arm64: dts: qcom: Add device tree for ASUS Vivobook S 15Xilin Wu1-0/+1
ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite SoC (X1E78100). Add the device tree for the laptop with support for the following features: - CPU frequency scaling up to 3.4GHz - NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2) - Keyboard and touchpad - WCN7850 Wi-Fi - Two Type-C ports on the left side (USB3 only in one orientation) - internal eDP display - ADSP and CDSP remoteprocs Further details could be found in the cover letter. Signed-off-by: Xilin Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sa8775p-ride-r3: add new board fileBartosz Golaszewski1-0/+1
Revision 3 of the sa8775p-ride board uses a different PHY for the two ethernet ports and supports 2.5G speed. Create a new file for the board reflecting the changes. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-21arm64: dts: qcom: aim300: add AIM300 AIoTTengfei Fan1-0/+1
Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe, I2C functions support. Here is a diagram of AIM300 AIoT Carrie Board and SoM +--------------------------------------------------+ | AIM300 AIOT Carrier Board | | | | +-----------------+ | |power----->| Fixed regulator |---------+ | | +-----------------+ | | | | | | v VPH_PWR | | +----------------------------------------------+ | | | AIM300 SOM | | | | | |VPH_PWR | | | | v | | | | +-------+ +--------+ +------+ | | | | | UFS | | QCS8550| |PMIC | | | | | +-------+ +--------+ +------+ | | | | | | | +----------------------------------------------+ | | | | +----+ +------+ | | |USB | | UART | | | +----+ +------+ | +--------------------------------------------------+ Co-developed-by: Qiang Yu <[email protected]> Signed-off-by: Qiang Yu <[email protected]> Co-developed-by: Ziyue Zhang <[email protected]> Signed-off-by: Ziyue Zhang <[email protected]> Signed-off-by: Tengfei Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-06arm64: dts: sm8650-hdk: add support for the Display Card overlayNeil Armstrong1-0/+4
With the SM8650-HDK, a Display Card kit can be connected to provide a VTDR6130 display with Goodix Berlin Touch controller. In order to route the DSI lanes to the connector for the Display Card kit, a switch must be changed on the board. The HDMI nodes are disabled since the DSI lanes are shared with the DSI to HDMI transceiver. Add support for this card as an overlay and apply it it at build-time to the sm8650-hdk dtb. Reviewed-by: Vladimir Zapolskiy <[email protected]> Tested-by: Vladimir Zapolskiy <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-29arm64: dts: qcom: add QCM6490 SHIFTphone 8Caleb Connolly1-0/+1
The SHIFTphone 8 is an upcoming QCM6490 smartphone, it has the following features: * 12GB of RAM, 512GB UFS storage * 1080p display. * Hardware kill switches for cameras and microphones * UART access via type-c SBU pins (enabled by an internal switch) Initial support includes: * Framebuffer display * UFS and sdcard storage * Battery monitoring and USB role switching via pmic glink * Bluetooth * Thermals * Wifi Signed-off-by: Caleb Connolly <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] [bjorn: Fixed indent of block comments] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-28arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5Alexandru Marc Serdeliuc1-0/+1
Add support for Samsung Galaxy Z Fold5 (q5q) foldable phone based on sm8550 Currently working features: - Framebuffer - UFS - i2c - Buttons Signed-off-by: Alexandru Marc Serdeliuc <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-28arm64: dts: qcom: Add Motorola Moto G 2015 (osprey)Martijn Braam1-0/+1
Motorola Moto G 2015 is an msm8916 based smartphone. Supported features: - eMMC and SD; - Buttons; - Touchscreen; - USB; - Fuel Gauge; - Sound. Signed-off-by: Martijn Braam <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> [Nikita: Use common dtsi] Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-28arm64: dts: qcom: Add Motorola Moto E 2015 LTE (surnia)Wiktor Strzębała1-0/+1
Motorola Moto E 2015 LTE is an msm8916 based smartphone. Supported features: - eMMC and SD; - Buttons; - Touchscreen; - USB; - Fuel Gauge; - Sound. Signed-off-by: Wiktor Strzębała <[email protected]> [Valérie: Sound and modem] Co-developed-by: Valérie Roux <[email protected]> Signed-off-by: Valérie Roux <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> [Nikita: Use common dtsi] Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-28arm64: dts: qcom: Add device tree for Motorola Moto G4 Play (harpia)Ruby Iris Juric1-0/+1
Motorola Moto G4 Play is an msm8916 based smartphone. Supported features: - eMMC and SD; - Buttons; - Touchscreen; - USB; - Fuel Gauge; - Sound; - Accelerometer. msm8916 Moto devices share significant portion of the design so the common parts are separated into a common dtsi. Signed-off-by: Ruby Iris Juric <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> [Nikita: Split up to common dtsi] Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-28arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTSSumit Garg1-0/+1
Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge Box Core board based on the Qualcomm APQ8016E SoC. Support for Schneider Electric HMIBSC. Features: - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) - 1GiB RAM - 8GiB eMMC, SD slot - WiFi and Bluetooth - 2x Host, 1x Device USB port - HDMI - Discrete TPM2 chip over SPI - USB ethernet adaptors (soldered) Co-developed-by: Jagdish Gediya <[email protected]> Signed-off-by: Jagdish Gediya <[email protected]> Reviewed-by: Caleb Connolly <[email protected]> Reviewed-by: Stephan Gerhold <[email protected]> Signed-off-by: Sumit Garg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-27arm64: dts: qcom: add TP-Link Archer AX55 v1Gabor Juhos1-0/+1
Add device tree source for the TP-Link Archer AX55 v1 [1] which is a dual-band WiFi router based on the IPQ5018 SoC. At the moment, only the UART, the GPIO LEDs and buttons are usable, but it makes it possible to boot an initramfs image on the device. The device tree can be extended in the future, once support for other periherals will be available for the platform. 1. https://www.tp-link.com/en/home-networking/wifi-router/archer-ax55/v1/ Signed-off-by: Gabor Juhos <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-27arm64: dts: qcom: sdm450: add Lenovo Smart Tab M10 DTSNeil Armstrong1-0/+1
This add initial support for the Lenovo Smart Tab M10 (WiFi) (model tbx605f) which is a 10.1" tablet by Lenovo based on the SDM450 SoC. It has a 10.1" LCP touch panel, SDCard slot, Volume+Power buttons, USB-C port amd front-facing camera (not supported). The proper LCP Panel support will be added later, for now using the simeple-framebuffer with the bootloader-initialized video memory. Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20240523-topic-sdm450-upstream-tbx605f-v1-3-e52b89133226@linaro.org Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-26arm64: dts: qcom: sm8650: add support for the SM8650-HDK boardNeil Armstrong1-0/+1
The SM8650-HDK is an embedded development platforms for the Snapdragon 8 Gen 3 SoC aka SM8650, with the following features: - Qualcomm SM8650 SoC - 16GiB On-board LPDDR5 - On-board WiFi 7 + Bluetooth 5.3/BLE - On-board UFS4.0 - M.2 Key B+M Gen3x2 PCIe Slot - HDMI Output - USB-C Connector with DP Almode & Audio Accessory mode - Micro-SDCard Slot - Audio Jack with Playback and Microphone - 2 On-board Analog microphones - 2 On-board Speakers - 96Boards Compatible Low-Speed and High-Speed connectors [1] - For Camera, Sensors and external Display cards - Compatible with the Linaro Debug board [2] - SIM Slot for Modem - Debug connectors - 6x On-Board LEDs Product Page: [3] [1] https://www.96boards.org/specifications/ [2] https://git.codelinaro.org/linaro/qcomlt/debugboard [3] https://www.lantronix.com/products/snapdragon-8-gen-3-mobile-hardware-development-kit/ Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Tested-by: Vladimir Zapolskiy <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-04-15arm64: dts: qcom: Add SM8550 Xperia 1 VKonrad Dybcio1-0/+1
Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part of the SoMC SM8550 Yodo platform. This commit brings support for: * Remoteprocs (sans modem for now) * Flash LED (the notification LED is gone :((((() * SD Card * USB (*including SuperSpeed*) + PMIC_GLINK (it's funky, requires a replug with an cable flip sometimes..) * Most regulators * Part of I2C-connected peripherals (notably no touch due to a driver bug) * PCIe0 (PCIe1 is unused) Do note display via simplefb is not supported, as the display is blanked upon exiting XBL. To create a working boot image, you need to run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8550-sony-xperia-\ yodo-pdx234.dtb > .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 2 \ -o boot.img-sony-xperia-pdx234 Then, you need to flash it on the device and get rid of all the vendor_boot/dtbo mess: // You have to either pull vbmeta{"","_system"} from // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img fastboot --disable-verity --disable-verification flash vbmeta_system \ vbmeta_system.img fastboot flash boot boot.img-sony-xperia-pdx234 fastboot erase vendor_boot fastboot erase recovery fastboot flash dtbo emptydtbo.img fastboot erase init_boot // ? I don't remember if it's necessary, sorry fastboot continue Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing a "fastboot erase" won't cut it, the bootloader will go crazy and things will fall apart when it tries to overlay random bytes from an empty partition onto a perfectly good appended DTB. Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-02-14arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device treesWalter Broemeling1-0/+4
Samsung Galaxy Core Prime and Grand Prime are phones based on MSM8916. They are similar to the other Samsung devices based on MSM8916 with only a few minor differences. This initial commit adds support for: - fortuna3g (SM-G530H) - gprimeltecan (SM-G530W) - grandprimelte (SM-G530FZ) - rossa (SM-G360G) The device trees contain initial support with: - GPIO keys - Regulator haptic - SDHCI (internal and external storage) - USB Device Mode - UART (on USB connector via the SM5502/SM5504 MUIC) - WCNSS (WiFi/BT) - Regulators - QDSP6 audio - Speaker/earpiece/headphones/microphones via digital/analog codec in MSM8916/PM8916 - WWAN Internet via BAM-DMUX There are different variants of Core Prime and Grand Prime, with some differences in accelerometer, NFC and panel. Core Prime and Grand Prime are similar, with some differences in MUIC, panel and touchscreen. The common parts are shared in msm8916-samsung-fortuna-common.dtsi and msm8916-samsung-rossa-common.dtsi to reduce duplication. Signed-off-by: Walter Broemeling <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> [Joe: Add audio, buttons and WiFi] Signed-off-by: Joe Mason <[email protected]> [Siddharth: Add fortuna3g] Signed-off-by: Siddharth Manthan <[email protected]> [Raymond: Add modem, fortuna-common.dtsi, grandprimelte and rossa] Signed-off-by: Raymond Hackley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-01-30arm64: dts: qcom: Add support for Xiaomi Redmi Note 9SJoe Mason1-0/+1
Add a device tree for the Xiaomi Redmi Note 9S (curtana) phone, based on sm7125-xiaomi-common.dtsi. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Joe Mason <[email protected]> Signed-off-by: David Wronek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-01-27arm64: dts: qcom: sm8550: add support for the SM8550-HDK boardNeil Armstrong1-0/+1
The SM8550-HDK is an embedded development platforms for the Snapdragon 8 Gen 2 SoC aka SM8550, with the following features: - Qualcomm SM8550 SoC - 16GiB On-board LPDDR5 - On-board WiFi 7 + Bluetooth 5.3/BLE - On-board UFS4.0 - M.2 Key B+M Gen3x2 PCIe Slot - HDMI Output - USB-C Connector with DP Almode & Audio Accessory mode - Micro-SDCard Slot - Audio Jack with Playback and Microphone - 2 On-board Analog microphones - 2 On-board Speakers - 96Boards Compatible Low-Speed and High-Speed connectors [1] - For Camera, Sensors and external Display cards - Compatible with the Linaro Debug board [2] - SIM Slot for Modem - Debug connectors - 6x On-Board LEDs Product Page: [3] [1] https://www.96boards.org/specifications/ [2] https://git.codelinaro.org/linaro/qcomlt/debugboard [3] https://www.lantronix.com/products/snapdragon-8-gen-2-mobile-hardware-development-kit/ Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20240125-topic-sm8550-upstream-hdk8550-v3-2-73bb5ef11cf8@linaro.org Signed-off-by: Bjorn Andersson <[email protected]>
2023-12-07arm64: dts: qcom: x1e80100: Add Compute Reference DeviceAbel Vesa1-0/+1
Add basic support for X1E80100 CRD board dts, which allows it to boot to a shell. Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Rajendra Nayak <[email protected]> Co-developed-by: Sibi Sankar <[email protected]> Signed-off-by: Sibi Sankar <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-12-07arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dtsRajendra Nayak1-0/+1
Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for X1E80100 SoC, describing the CPUs, GCC and RPMHCC clock controllers, geni UART, interrupt controller, TLMM, reserved memory, interconnects, SMMU and LLCC nodes. Co-developed-by: Abel Vesa <[email protected]> Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Rajendra Nayak <[email protected]> Co-developed-by: Sibi Sankar <[email protected]> Signed-off-by: Sibi Sankar <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-12-07arm64: dts: qcom: sm8650: add initial SM8650 QRD dtsNeil Armstrong1-0/+1
Add initial QRD (Qualcomm Reference Device) DT, it supports boot to shell with buttons, leds and USB peripheral. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-12-07arm64: dts: qcom: sm8650: add initial SM8650 MTP dtsNeil Armstrong1-0/+1
Add initial QRD (Qualcomm Reference Device) DT, only boots to shell with USB device support. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-12-07arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device treeLuka Panio1-0/+1
Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc. Signed-off-by: Luka Panio <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Acked-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-12-02arm64: dts: qcom: msm8939-huawei-kiwi: Add initial device treeLukas Walter1-0/+1
This dts adds support for Huawei Honor 5X / GR5 (2016) smartphone released in 2015. Add device tree with initial support for: - GPIO keys - Hall sensor - SDHCI (internal and external storage) - WCNSS (BT/WIFI) - Sensors (accelerometer and proximity) - Vibrator - Touchscreen Signed-off-by: Raymond Hackley <[email protected]> Signed-off-by: Lukas Walter <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-12-02arm64: dts: qcom: Add base qcs6490-rb3gen2 board dtsKomal Bajaj1-0/+1
Add DTS for Qualcomm qcs6490-rb3gen2 board which uses QCS6490 SoC. This adds debug uart and usb support along with regulators found on this board. Co-developed-by: Naina Mehta <[email protected]> Signed-off-by: Naina Mehta <[email protected]> Signed-off-by: Komal Bajaj <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Caleb Connolly <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-12-02arm64: dts: qcom: Add base qcm6490 idp board dtsKomal Bajaj1-0/+1
Add DTS for Qualcomm IDP platform using QCM6490 SoC. This adds debug uart, eMMC and usb support along with regulators found on this board. Signed-off-by: Komal Bajaj <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Caleb Connolly <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-22arm64: dts: qcom: apq8016-sbc: Add overlay for usb host modeVignesh Raman1-0/+4
Due to the presence of the fastboot micro cable in the CI farm, it causes the hardware to remain in gadget mode instead of host mode. So it doesn't find the network, which results in failure to mount root fs via NFS. Add an overlay dtso file that sets the dr_mode to host, allowing the USB controllers to work in host mode. With commit 15d16d6dadf6 ("kbuild: Add generic rule to apply fdtoverlay"), overlay target can be used to simplify the build of DTB overlays. It uses fdtoverlay to merge base device tree with the overlay dtso. apq8016-sbc-usb-host.dtb file can be used by drm-ci, mesa-ci. Suggested-by: Dmitry Baryshkov <[email protected]> Suggested-by: Maxime Ripard <[email protected]> Signed-off-by: Helen Koike <[email protected]> Signed-off-by: David Heidelberg <[email protected]> Signed-off-by: Vignesh Raman <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Acked-by: Helen Koike <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-20arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5Luca Weiss1-0/+1
Add device tree for the Fairphone 5 smartphone which is based on the QCM6490 SoC. Supported features are, as of now: * Bluetooth * Debug UART * Display via simplefb * Flash/torch LED * Flip cover sensor * Power & volume buttons * RTC * SD card * USB * Various plumbing like regulators, i2c, spi, etc Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Tested-by: Konrad Dybcio <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-19arm64: dts: qcom: msm8939-longcheer-l9100: Add initial device treeAndré Apitzsch1-0/+1
This dts adds support for BQ Aquaris M5 (Longcheer L9100) released in 2015. Add a device tree with initial support for: - GPIO keys - Hall sensor - SDHCI - WCNSS (BT/WIFI) - Accelerometer/Magnetometer - Vibrator - Touchscreen - Front flash Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: André Apitzsch <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-19arm64: dts: qcom: Add support for the Xiaomi SM7125 platformDavid Wronek1-0/+1
There are 6 Xiaomi smartphones with the SM7125 SoC: - POCO M2 Pro (gram) - Redmi Note 9S (curtana) - Redmi Note 9 Pro (Global, joyeuse) - Redmi Note 9 Pro (India, curtana) - Redmi Note 9 Pro Max (excalibur) - Redmi Note 10 Lite (curtana) These devices share a common board design (a.k.a miatoll) with only a few differences. Add support for the common board, as well as support for the global Redmi Note 9 Pro. Signed-off-by: David Wronek <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-19arm64: dts: qcom: sc7180: Add sku_id and board id for lazor/limozeenSheng-Liang Pan1-0/+5
SKU ID 10: Lazor LTE+Wifi, no-esim (Strapped 0 X 0) SKU ID 15: Limozeen LTE+Wifi, TS, no esim (Strapped 1 X 0) SKU ID 18: Limozeen LTE+Wifi, no TS, no esim (Strapped X 0 0) Even though the "no esim" boards are strapped differently than ones that have an esim, the esim isn't represented in the device tree so the same device tree can be used for LTE w/ esim and LTE w/out esim. add BRD_ID(0, Z, 0) = 10 for new board with ALC5682i-VS Signed-off-by: Sheng-Liang Pan <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20230823151005.v6.2.I8f20fdfe34a2e8a38373bbd65587754b324f3dcb@changeid Signed-off-by: Bjorn Andersson <[email protected]>
2023-08-13arm64: dts: qcom: apq8016-sbc-d3-camera-mezzanine: Move default ov5640 to a ↵Bryan O'Donoghue1-0/+1
standalone dts At the moment we define a single ov5640 sensor in the apq8016-sbc and disable that sensor. The sensor mezzanine for this is a D3 Engineering Dual ov5640 mezzanine card. Move the definition from the apq8016-sbc where it shouldn't be to a standalone dts. Enables the sensor by default, as we are adding a standalone mezzanine structure. Signed-off-by: Bryan O'Donoghue <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-08-11arm64: dts: Add ipq5018 SoC and rdp432-c2 board supportSricharan Ramabadhran1-0/+1
Add initial device tree support for the Qualcomm IPQ5018 SoC and rdp432-c2 board. Few things like 'reboot' does not work because, couple of more 'SCM' APIS are needed to clear some TrustZone settings. Those will be posted separately. Reviewed-by: Krzysztof Kozlowski <[email protected]> Co-developed-by: Varadarajan Narayanan <[email protected]> Signed-off-by: Varadarajan Narayanan <[email protected]> Co-developed-by: Gokul Sriram Palanisamy <[email protected]> Signed-off-by: Gokul Sriram Palanisamy <[email protected]> Signed-off-by: Sricharan Ramabadhran <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-07-31arm64: dts: qcom: Add base SM4450 QRD DTSTengfei Fan1-0/+1
Add DTS for Qualcomm QRD platform which uses SM4450 SoC. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Tengfei Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-07-21arm64: dts: qcom: msm8939-samsung-a7: Add initial dtsLin, Meng-Bo1-0/+1
This dts adds support for Samsung Galaxy A7 smartphone released in 2015. Add a device tree for A7 with initial support for: - GPIO keys - Hall Sensor - SDHCI (internal and external storage) - USB Device Mode - UART (on USB connector via the SM5502 MUIC) - WCNSS (WiFi/BT) - Regulators - Touch key - Accelerometer/Magnetometer - Fuelgauge - NFC - Vibrator - Touchscreen Signed-off-by: Lin, Meng-Bo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-06-13arm64: dts: qcom: ipq9574: add support for RDP454 variantPoovendhan Selvaraj1-0/+1
Add the initial device tree support for the Reference Design Platform (RDP) 454 based on IPQ9574 family of SoCs. This patch adds support for Console UART, SPI NOR and SMPA1 regulator node. Signed-off-by: Poovendhan Selvaraj <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13arm64: dts: qcom: ipq5332: rename mi01.2 dts to rdp441Kathiravan T1-1/+1
To align with ipq5332-rdp468.dts, lets rename the mi01.2 dts as well to ipq5332-rdp441.dts. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Kathiravan T <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13arm64: dts: qcom: ipq5332: add support for the RDP474 variantKathiravan T1-0/+1
Add the initial device tree support for the Reference Design Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries the support for Console UART, eMMC, I2C and GPIO based buttons. Signed-off-by: Kathiravan T <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13arm64: dts: qcom: Add SDX75 platform and IDP board supportRohit Agarwal1-0/+1
Add basic devicetree support for SDX75 platform and IDP board from Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms the Application Processor Sub System (APSS) along with standard Qualcomm peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem etc.. Signed-off-by: Rohit Agarwal <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-05-30arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5GBjorn Andersson1-0/+1
Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm SC8180X platform. Supported peripherals includes keyboard, touchpad, UFS storage, external USB and WiFi. Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-05-30arm64: dts: qcom: sc8180x: Introduce PrimusBjorn Andersson1-0/+1
Introduce support for the SC8180X reference device, aka Primus, with debug UART, regulators, UFS and USB support. Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-05-27arm64: dts: qcom: ipq5332: add support for the RDP442 variantKathiravan T1-0/+1
Add the initial device tree support for the Reference Design Platform(RDP) 442 based on IPQ5332 family of SoC. This patch carries the support for Console UART, SPI NOR, eMMC and I2C. Signed-off-by: Kathiravan T <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.