aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/nxp
AgeCommit message (Collapse)AuthorFilesLines
2024-01-25ARM: dts: Fix TPM schema violationsLukas Wunner2-2/+2
Since commit 26c9d152ebf3 ("dt-bindings: tpm: Consolidate TCG TIS bindings"), several issues are reported by "make dtbs_check" for ARM devicetrees: The nodename needs to be "tpm@0" rather than "tpmdev@0" and the compatible property needs to contain the chip's name in addition to the generic "tcg,tpm_tis-spi" or "tcg,tpm-tis-i2c": tpmdev@0: $nodename:0: 'tpmdev@0' does not match '^tpm(@[0-9a-f]+)?$' from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml# tpm@2e: compatible: 'oneOf' conditional failed, one must be fixed: ['tcg,tpm-tis-i2c'] is too short from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml# Fix these schema violations. Aspeed Facebook BMCs use an Infineon SLB9670: https://lore.kernel.org/all/ZZSmMJ%2F%2Fl972Qbxu@fedora/ https://lore.kernel.org/all/ZZT4%2Fw2eVzMhtsPx@fedora/ https://lore.kernel.org/all/ZZTS0p1hdAchIbKp@heinlein.vulture-banana.ts.net/ Aspeed Tacoma uses a Nuvoton NPCT75X per commit 39d8a73c53a2 ("ARM: dts: aspeed: tacoma: Add TPM"). phyGATE-Tauri uses an Infineon SLB9670: https://lore.kernel.org/all/ab45c82485fa272f74adf560cbb58ee60cc42689.camel@phytec.de/ A single schema violation remains in am335x-moxa-uc-2100-common.dtsi because it is unknown which chip is used on the board. The devicetree's author has been asked for clarification but has not responded so far: https://lore.kernel.org/all/20231220090910.GA32182@wunner.de/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
2024-01-11Merge tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds56-212/+289
Pull SoC DT updates from Arnd Bergmann: "There is one new SoC for each 32-bit Arm and 64-bit RISC-V, but both the Rockchips rv1109 and Sopgho CV1812H are just minor variations of already supported chips. The other six new SoCs are all part of existing arm64 families, but are somewhat more interesting: - Samsung ExynosAutov920 is an automotive chip, and the first one we support based on the Cortex-A78AE core with lockstep mode. - Google gs101 (Tensor G1) is the chip used in a number of Pixel phones, and is grouped with Samsung Exynos here since it is based on the same SoC design, sharing most of its IP blocks with that series. - MediaTek MT8188 is a new chip used for mid-range tablets and Chromebooks, using two Cortex-A78 cores where the older MT8195 had four of them. - Qualcomm SM8650 (Snapdragon 8 Gen 3) is their current top range phone SoC and the first supported chip based on Cortex-X4, Cortex-A720 and Cortex-A520. - Qualcomm X1E80100 (Snapdragon X Elite) in turn is the latest Laptop chip using the custom Oryon cores. - Unisoc UMS9620 (Tanggula 7 series) is a 5G phone SoC based on Cortex-A76 and Cortex-A55 In terms of boards, we have - Five old Microsoft Lumia phones, the HTC One Mini 2, Motorola Moto G 4G, and Huawei Honor 5X/GR5, all based on Snapdragon SoCs. - Multiple Rockchips mobile gaming systems (Anbernic RG351V, Powkiddy RK2023, Powkiddy X55) along with the Sonoff iHost Smart Home Hub and a few Rockchips SBCs - Some ComXpress boards based on Marvell CN913x, which is the follow-up to Armada 7xxx/8xxx. - Six new industrial/embedded boards based on NXP i.MX8 and i.MX9 - Mediatek MT8183 based Chromebooks from Lenovo, Asus and Acer. - Toradex Verdin AM62 Mallow carrier for TI AM62 - Huashan Pi board based on the SophGo CV1812H RISC-V chip - Two boards based on Allwinner H616/H618 - A number of reference boards for various added SoCs from Qualcomm, Mediatek, Google, Samsung, NXP and Spreadtrum As usual, there are cleanups and warning fixes across all platforms as well as added features for several of them" * tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (857 commits) ARM: dts: usr8200: Fix phy registers arm64: dts: intel: minor whitespace cleanup around '=' arm64: dts: socfpga: agilex: drop redundant status arm64: dts: socfpga: agilex: add unit address to soc node arm64: dts: socfpga: agilex: move firmware out of soc node arm64: dts: socfpga: agilex: move FPGA region out of soc node arm64: dts: socfpga: agilex: align pin-controller name with bindings arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings arm64: dts: socfpga: stratix10: add unit address to soc node arm64: dts: socfpga: stratix10: move firmware out of soc node arm64: dts: socfpga: stratix10: move FPGA region out of soc node arm64: dts: socfpga: stratix10: align pincfg nodes with bindings arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size ARM: dts: socfpga: align NAND controller name with bindings ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size arm64: dts: rockchip: Fix led pinctrl of lubancat 1 arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6 arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b ...
2023-12-16ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node nameFabio Estevam1-1/+1
Node names should be generic. Use 'rtc' for the rtc node to fix the following dt-schema warning: imx27-phytec-phycore-rdk.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$' from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-16ARM: dts: imx25: Remove unneeded keypad propertiesFabio Estevam1-3/+0
Per imx-keypad.yaml, '#address-cells', '#size-cells', 'clock-names' are not valid properties. Remove them to fix the following dt-schema warning: imx25-pdk.dtb: kpp@43fa8000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'clock-names' were unexpected) from schema $id: http://devicetree.org/schemas/input/imx-keypad.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx23/28: Fix the DMA controller node nameFabio Estevam2-2/+2
Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'. Change it to fix the following dt-schema warning. imx28-apf28.dtb: dma-apbx@80024000: $nodename:0: 'dma-apbx@80024000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx23-sansa: Use preferred i2c-gpios propertiesFabio Estevam1-8/+4
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx27-apf27dev: Fix LED nameFabio Estevam1-1/+1
Per leds-gpio.yaml, the led names should start with 'led'. Change it to fix the following dt-schema warning: imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx25/27: Pass timing0Fabio Estevam8-8/+8
Per display-timings.yaml, the 'timing' pattern should be used to describe the display timings. Change it accordingly to fix the following dt-schema warning: imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx25: Fix the iim compatible stringFabio Estevam1-1/+1
Per imx-iim.yaml, the compatible string should only contain a single entry. Use it as "fsl,imx25-iim" to fix the following dt-schema warning: imx25-karo-tx25.dtb: efuse@53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25: Move usbphy nodes out of simple-busFabio Estevam1-18/+10
The USB PHY nodes should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx1: Use 'bus' for AIPI busFabio Estevam1-2/+2
Per simple-bus.yaml, 'aipi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx1-apf9328.dtb: aipi@200000: $nodename:0: 'aipi@200000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-busFabio Estevam2-22/+13
The USB PHY nodes should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-pdk: Move usbphy0 out of simple-busFabio Estevam1-12/+6
The USB PHY should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Use 'bus' for EMI busFabio Estevam1-1/+1
Per simple-bus.yaml, 'emi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx25-pdk.dtb: emi@80000000: $nodename:0: 'emi@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Use 'bus' for AIPI busFabio Estevam1-2/+2
Per simple-bus.yaml, 'aipi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx27-pdk.dtb: aipi@10020000: $nodename:0: 'aipi@10020000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-phytec-phycore-som: Use the mux- prefixFabio Estevam1-2/+2
According to Documentation/devicetree/bindings/sound/imx-audmux.yaml, there must be a "mux-" prefix in the audmux port nodes. Add the "mux-" prefix to avoid the following dt-schema warning: imx27-phytec-phycore-rdk.dtb: audmux@10016000: 'pins4', 'ssi0' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx1: Fix sram nodeFabio Estevam1-1/+4
Per sram.yaml, address-cells, size-cells and ranges are mandatory. The node name should be sram. Change the node name and pass the required properties to fix the following dt-schema warnings: imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?' from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Fix sram nodeFabio Estevam1-0/+3
Per sram.yaml, address-cells, size-cells and ranges are mandatory. Pass them to fix the following dt-schema warnings: Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx: Use flash@0,0 patternFabio Estevam4-4/+4
Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern. Change it to 'flash@0,0' to fix the following dt-schema warning: imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$' from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25/27-eukrea: Fix RTC node nameFabio Estevam2-2/+2
Node names should be generic. Use 'rtc' as node name to fix the following dt-schema warning: imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$' from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25-pdk: Pass #sound-dai-cellsFabio Estevam1-0/+1
Per sgtl5000.yaml, '#sound-dai-cells' is a required property. Pass it to fix the following dt-schema warning: imx25-pdk.dtb: sgtl5000@a: '#sound-dai-cells' is a required property from schema $id: http://devicetree.org/schemas/sound/sgtl5000.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25: Pass I2C clock-names propertyFabio Estevam1-3/+3
Per i2c-imx.yaml, 'clock-names' is a required property. Pass it to fix the following dt-schema warning: imx25-pdk.dtb: i2c@43f80000: clock-names:0: 'ipg' was expected from schema $id: http://devicetree.org/schemas/i2c/i2c-imx.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx23/28: Remove undocumented "fsl,clkctrl"Fabio Estevam2-2/+2
Per imx23-clock.yaml and imx28-clock.yaml, fsl,clkctrl is not a valid compatible string. Remove it to fix the following dt-schema warning: imx28-evk.dtb: clkctrl@80040000: compatible: ['fsl,imx28-clkctrl', 'fsl,clkctrl'] is too long from schema $id: http://devicetree.org/schemas/clock/imx28-clock.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx28-xea: Pass the 'model' propertyFabio Estevam1-0/+1
Per root-node.yaml, 'model' is a required property. Pass it to fix the following dt-schema warning: imx28-xea.dtb: /: 'model' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Fixes: 445ae16ac1c5 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gptPhilipp Zabel1-4/+4
The timer nodes declare compatibility with "fsl,imx6sx-gpt", which itself is compatible with "fsl,imx6dl-gpt". Switch the fallback compatible from "fsl,imx6sx-gpt" to "fsl,imx6dl-gpt". Fixes: 949673450291 ("ARM: dts: add imx7d soc dtsi file") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx28-lwe: Pass device_type to the memory nodeFabio Estevam1-0/+1
Per memory.yaml, 'device_type' is a required property. Pass it to fix the following dt-schema warning: imx28-xea.dtb: /: memory@40000000: 'device_type' is a required property from schema $id: http://devicetree.org/schemas/memory.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx23/28: Remove unneeded "fsl,mxs-gpio"Fabio Estevam2-8/+8
According to gpio-mxs.yaml, only "fsl,imx23-gpio" or "fsl,imx28-gpio" are valid compatible strings. This fixes the following dt-schema warnings: imx23-evk.dtb: pinctrl@80018000: gpio@0:compatible: ['fsl,imx23-gpio', 'fsl,mxs-gpio'] is too long from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx28-tx28: Pass #sound-dai-cellsFabio Estevam1-0/+1
Per sgtl5000.yaml, '#sound-dai-cells' is a required property. Pass it to fix the following dt-schema warning: imx28-tx28.dtb: sgtl5000@a: '#sound-dai-cells' is a required property from schema $id: http://devicetree.org/schemas/sound/sgtl5000.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx7s: Add on-chip memoryPhilipp Zabel1-0/+9
Add the 128 KiB on-chip SRAM at address 0x900000. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx7: add MIPI-DSI supportMarco Felsch1-0/+46
This adds the device tree support for the MIPI-DSI block. The block can be used as encoder for the parallel signals coming from the lcdif block. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: nxp: Fix some common switch mistakesLinus Walleij5-70/+70
Fix some errors in the Marvell MV88E6xxx switch descriptions: - switch0@0 is not OK, should be ethernet-switch@0 - ports should be ethernet-ports - port should be ethernet-port - phy should be ethernet-phy Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: nxp: minor whitespace cleanup around '='Krzysztof Kozlowski20-27/+27
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx7d-colibri-emmc: Add usdhc aliasesHiago De Franco1-0/+4
Add mmc aliases to ensure a consistent mmc device naming across the Toradex SoM family, with this commit mmc0 is the on-module eMMC boot device and the not available mmc interfaces are removed. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx6qdl-colibri: Add usdhc aliasesHiago De Franco1-0/+7
Add mmc aliases to ensure a consistent mmc device naming across the Toradex SoM family, with this commit mmc0 is the on-module eMMC boot device and the not available mmc interfaces are removed. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx6qdl-apalis: Add usdhc aliasesHiago De Franco1-0/+7
Add mmc aliases to ensure a consistent mmc device naming across the Toradex SoM family, with this commit mmc0 is the on-module eMMC boot device and the not available mmc interfaces are removed. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: nxp: imx7d-pico: add cpu-supply nodesLech Perczak1-0/+8
The PICO-IMX7D SoM has the usual power supply configuration using output sw1a of PF3000 PMIC, which was defined in downstream derivative of linux-imx (see link) in the sources for "Android Things" devkit. It is required to support CPU frequency scaling. Map the respective "cpu-supply" nodes of each core to sw1a of the PMIC. Enabling them causes cpufreq-dt, and imx-thermal drivers to probe successfully, and CPU frequency scaling to function. Link: https://android.googlesource.com/platform/hardware/bsp/kernel/nxp/imx-v4.1/+/o-iot-preview-5/arch/arm/boot/dts/imx7d-pico.dtsi#849 Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-05ARM: dts: imx6ul-pico: Describe the Ethernet PHY clockFabio Estevam1-0/+2
Since commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")thet Ethernet PHY is no longer configured via code in board file. This caused Ethernet to stop working. Fix this problem by describing the clocks and clock-names to the Ethernet PHY node so that the KSZ8081 chip can be clocked correctly. Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-05ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)João Rodrigues1-2/+7
TQMa7x (revision 01xxx) uses a LM75A temperature sensor. The two sensors use different I2C addresses, so we can set both sensors simultaneously. Signed-off-by: João Rodrigues <jrodrigues@ubimet.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-05ARM: dts: imx6q-apalis: add can power-up delay on ixora boardAndrejs Cainikovs1-0/+2
Newer variants of Ixora boards require a power-up delay when powering up the CAN transceiver of up to 1ms. Cc: stable@vger.kernel.org Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx6q: skov: fix ethernet clock regressionStefan Kerkmann1-2/+2
A regression was introduced in the Skov specific i.MX6 flavor reve-mi1010ait-1cp1 device tree causing the external ethernet controller to not being selected as the clock source for the i.MX6 ethernet MAC, resulting in a none functional ethernet interface. The root cause is that the ethernet clock selection is now part of the clocks node, which is overwritten in the specific device tree and wasn't updated to contain these ethernet clocks. Fixes: c89614079e44 ("ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent") Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7s: Add DMA channels for CSPI peripheralsAlexander Stein1-0/+8
This adds the rx/tx DMA channels for CSPI peripherals. Channel numbers are taken from i.MX7D RM Rev1 01/2018. Peripheral types ID (7) is selected according to fsl,imx-sdma.yaml and is similar to i.MX6 and i.MX8M platforms. Same goes for transfer priority ID (last number). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx6ul: mba6ulx: fix typo in commentsMarkus Niebel1-1/+1
Replace 'SPPEED' with 'SPEED' Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx6qdl: mba6: fix typo in commentsMarkus Niebel1-3/+3
Replace 'SPPEED' with 'SPEED' Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7s: Add missing #thermal-sensor-cellsAlexander Stein1-0/+1
imx-thermal.yaml is referencing thermal-sensor.yaml, thus this property is required. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx7d-mba7.dtb: tempmon: '#thermal-sensor-cells' is a required property from schema $id: http://devicetree.org/schemas/thermal/imx-thermal.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7s: Fix nand-controller #size-cellsAlexander Stein1-1/+1
nand-controller.yaml bindings says #size-cells shall be set to 0. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: nand-controller@33002000: #size-cells:0:0: 0 was expected from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7s: Fix lcdif compatibleAlexander Stein1-1/+1
imx7d-lcdif is compatible to imx6sx-lcdif. MXSFB_V6 supports overlay by using LCDC_AS_CTRL register. This registers used by overlay plane: * LCDC_AS_CTRL * LCDC_AS_BUF * LCDC_AS_NEXT_BUF are listed in i.MX7D RM as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7d: Fix coresight funnel portsAlexander Stein2-4/+5
imx7d uses two ports for 'in-ports', so the syntax port@<num> has to be used. imx7d has both port and port@1 nodes present, raising these error: funnel@30041000: in-ports: More than one condition true in oneOf schema funnel@30041000: Unevaluated properties are not allowed ('in-ports' was unexpected) Fix this by also using port@0 for imx7s as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx7d-pico-pi: Disable USDHC1Fabio Estevam1-0/+4
The imx7d-pico-pi board does not have an SD card slot connected to the USDHC1 port. Only eMMC and Wifi SDIO ports are used. Disable the USDHC1 node. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx28: Fix dcp compatibleFabio Estevam1-1/+1
Per fsl-dcp.yaml, passing "fsl,imx28-dcp", "fsl,imx23-dcp" is not valid. Change it to pass only "fsl,imx28-dcp" to fix the following schema warning: crypto@80028000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx28-dcp', 'fsl,imx23-dcp'] is too long 'fsl,imx28-dcp' is not one of ['fsl,imx6sl-dcp', 'fsl,imx6ull-dcp'] 'fsl,imx28-dcp' was expected Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx7s: Remove #power-domain-cells from gpcv2Fabio Estevam1-1/+0
Per fsl,imx-gpcv2.yaml, '#power-domain-cells' is not a valid property for the top-level gpcv2 node. It is only valid for its children nodes. Remove it to fix the following schema warning: gpc@303a0000: '#power-domain-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.