aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/rt5677.txt
AgeCommit message (Collapse)AuthorFilesLines
2024-07-01ASoC: dt-bindings: realtek,rt5677: Convert to dtschemaAnimesh Agarwal1-78/+0
Convert the RT5677 audio CODEC bindings to DT schema. Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240627105030.14360-1-animeshagarwal28@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: dt-bindings: Correct interrupt flags in examplesKrzysztof Kozlowski1-1/+1
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted some logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200908145954.4629-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: rt5677: use 'active low' logic for reset pinAnatol Pomozov1-1/+1
According to the datasheet RESET is active low pin, i.e. system goes to reset state when pin signal is low. The previous implementeation was assuming the pin is configured as 'active high' in DTS. Changle the gpio handling code and DTS configuration to 'active low'. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-16ASoC: rt5677: Add reset-gpio dts optionAnatol Pomozov1-0/+2
It allows to configure codec's RESET pin gpio Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-22ASoC: rt5677: add GPIO IRQ supportOder Chiou1-0/+10
This allows to enable Mic Jack detection feature Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Modified-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20ASoC: rt5677: Add option to configure gpio as floating/pullup/pulldownAnatol Pomozov1-0/+7
gpio_config is array of 6 elements that allows to set GPIO as floating, pullup, pulldown. Sponsored: Google ChromeOS Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-29ASoC: rt5677: Add dts properties for input/output differential configurationAnatol Pomozov1-0/+9
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-25ASoC: rt5677: Add gpio-controller DTS documentationAnatol Pomozov1-0/+9
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-24ASoC: rt5677: Add a configuration option for LDO2_POW pinAnatol Pomozov1-0/+41
Some boards have this pin statically tied and do not require any configuration, some other boards allow to enable chip using GPIO. Add an option that tells which GPIO is used to power the audio codec. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.