aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound
AgeCommit message (Collapse)AuthorFilesLines
2024-10-29ASoC: dt-bindings: rockchip,rk3308-codec: add port propertyDmitry Yashin1-0/+4
Fix DTB warnings when rk3308-codec used with audio-graph-card by documenting port property: codec@ff560000: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Dmitry Yashin <dmt.yashin@gmail.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patch.msgid.link/20241028213314.476776-2-dmt.yashin@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-07ASoC: dt-bindings: davinci-mcasp: Fix interrupt propertiesMiquel Raynal1-9/+9
Combinations of "tx" alone, "rx" alone and "tx", "rx" together are supposedly valid (see link below), which is not the case today as "rx" alone is not accepted by the current binding. Let's rework the two interrupt properties to expose all correct possibilities. Cc: Péter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/linux-sound/20241003102552.2c11840e@xps-13/T/#m277fce1d49c50d94e071f7890aed472fa2c64052 Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241003083611.461894-1-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-02qrb4210-rb2: add HDMI audio playback supportMark Brown1-0/+1
Merge series from Alexey Klimov <alexey.klimov@linaro.org>: This series still keeps "qcom,qrb4210-rb2-sndcard" for sm8250 soundcard. As per off the list discussion with Srini it was suggested to have it since in future it may be required to add clocks, workarounds, quirks, model-specific things based on this compatible. The same as for RB5 compatible in sm8250 snd driver. This focuses on HDMI audio playback only hence there are no soundwire and dmic pins, for instance. The work to enable playback via wcd+wsa8815 amplifier is in progress (it works) and one of the routes is to merge such two patchsets together. Link to prev series: https://lore.kernel.org/linux-sound/20240628010715.438471-1-alexey.klimov@linaro.org/
2024-10-02ASoC: dt-bindings: davinci-mcasp: Fix interrupts propertyMiquel Raynal1-1/+1
My understanding of the interrupts property is that it can either be: 1/ - TX 2/ - TX - RX 3/ - Common/combined. There are very little chances that either: - TX - Common/combined or even - TX - RX - Common/combined could be a thing. Looking at the interrupt-names definition (which uses oneOf instead of anyOf), it makes indeed little sense to use anyOf in the interrupts definition. I believe this is just a mistake, hence let's fix it. Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-02ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcardAlexey Klimov1-0/+1
Add adsp-backed soundcard compatible for QRB4210 RB2 platform, which as of now looks fully compatible with SM8250. Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241002022015.867031-2-alexey.klimov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-30ASoC: dt-bindings: renesas,rsnd: correct reg-names for R-Car Gen1Wolfram Sang1-1/+1
The device at 0xffd90000 is named SRU, both in the datasheet and SoC DTSI. Fix the typo in the bindings to avoid the false positive report: sound@ffd90000: reg-names:0: 'sru' is not one of ['scu', 'ssi', 'adg'] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240926113241.24060-2-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-26Merge tag 'soc-ep93xx-dt-6.12' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC update from Arnd Bergmann: "Convert ep93xx to devicetree This concludes a long journey towards replacing the old board files with devictree description on the Cirrus Logic EP93xx platform. Nikita Shubin has been working on this for a long time, for details see the last post on https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/" * tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config net: cirrus: use u8 for addr to calm down sparse dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0 dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe() pinctrl: ep93xx: Fix raster pins typo spi: ep93xx: update kerneldoc comments for ep93xx_spi clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate() clk: ep93xx: add module license dmaengine: cirrus: remove platform code ASoC: cirrus: edb93xx: Delete driver ARM: ep93xx: soc: drop defines ARM: ep93xx: delete all boardfiles ata: pata_ep93xx: remove legacy pinctrl use pwm: ep93xx: drop legacy pinctrl ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms ARM: dts: ep93xx: Add EDB9302 DT ARM: dts: ep93xx: add ts7250 board ARM: dts: add Cirrus EP93XX SoC .dtsi ...
2024-09-19Merge tag 'devicetree-for-6.12' of ↵Linus Torvalds3-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Drop duplicate devices in trivial-devices.yaml - Add a common serial peripheral device schema and reference it in serial device schemas. - Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt, snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis, fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522, aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer, ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema - Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p, fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc, isil,isl69260, ti,tps546d24, and lpc32xx DMA mux - Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and mediatek,mt6795-sys-clock.yaml - Add arm,gic ESPI and EPPI interrupt type specifiers - Add another batch of legacy compatible strings which we have no intention of documenting - Add dmas/dma-names properties to FSL lcdif - Fix wakeup-source reference to m8921-keypad.yaml - Treewide fixes of typos in bindings DT Core: - Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429 - More conversions to scoped iterators and __free() initializer - Handle overflows in address resources on 32-bit systems - Extend extracting compatible strings in sources from function parameters - Use of_property_present() in DT unittest - Clean-up of_irq_to_resource() to use helpers - Support #msi-cells=<0> in of_msi_get_domain() - Improve the kerneldoc for of_property_match_string() - kselftest: Ignore nodes that have ancestors disabled" * tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits) dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml of/irq: Use helper to define resources of/irq: Make use of irq_get_trigger_type() dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required drivers/of: Improve documentation for match_string of: property: Do some clean up with use of __free() dt-bindings: watchdog: qcom-wdt: document support on SA8255p dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers dt-bindings: dma: Add lpc32xx DMA mux binding dt-bindings: trivial-devices: Drop duplicate "maxim,max1237" dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices dt-bindings: trivial-devices: Deprecate "ad,ad7414" dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles dt-bindings: wakeup-source: update reference to m8921-keypad.yaml dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p dt-bindings: Fix various typos of: address: Unify resource bounds overflow checking ...
2024-09-13dt-bindings: Fix various typosYu-Chun Lin2-2/+2
Corrected several typos in Documentation/devicetree/bindings files. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-12ASoC: dt-bindings: ep93xx: Document Audio Port supportNikita Shubin1-0/+4
Document Audio Graph Port support in binding document. Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-12ASoC: dt-bindings: ep93xx: Document DMA supportNikita Shubin1-0/+12
Document DMA support in binding document. Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andy@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11ASoC: dt-bindings: microchip,sama7g5-spdifrx: Add common DAI referenceAndrei Simion1-1/+4
Update the spdifrx yaml file to reference the dai-common.yaml schema, enabling the use of the 'sound-name-prefix' property Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240910082202.45972-1-andrei.simion@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11ASoC: dt-bindings: renesas,rsnd: add post-init-providers propertyKuninori Morimoto1-0/+6
At least if rsnd is using DPCM connection on Audio-Graph-Card2, fw_devlink might doesn't have enough information to break the cycle (Same problem might occur with Multi-CPU/Codec or Codec2Codec). In such case, rsnd driver will not be probed. Add post-init-providers support to break the link cycle. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/87wmjkifob.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03Fixes for the audio setup on the rk3588-nanopc-t6Mark Brown1-0/+12
Merge series from Heiko Stuebner <heiko@sntech.de>: The Nanopc-T6 board does contain some devicetree errors, that came to light with recent changes to the board.
2024-09-03ASoC: dt-bindings: mediatek,mt8365-mt6357: Add audio sound card documentAlexandre Mergnat1-0/+107
Add soundcard bindings for the MT8365 SoC with the MT6357 audio codec. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://patch.msgid.link/20240226-audio-i350-v7-2-6518d953a141@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03ASoC: dt-bindings: mediatek,mt8365-afe: Add audio afe documentAlexandre Mergnat1-0/+130
Add MT8365 audio front-end bindings Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://patch.msgid.link/20240226-audio-i350-v7-1-6518d953a141@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03ASoC: dt-bindings: realtek,rt5616: Document audio graph portHeiko Stuebner1-0/+4
The codec can be used in conjunction with an audio-graph-card to provide an endpoint for binding with the other side of the audio link. Document the 'port' property that is used for this to prevent dtbscheck errors like: rockchip/rk3588-nanopc-t6-lts.dtb: codec@1b: Unevaluated properties are not allowed ('port' was unexpected) from schema $id: http://devicetree.org/schemas/sound/realtek,rt5616.yaml# Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240830203819.1972536-3-heiko@sntech.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03ASoC: dt-bindings: realtek,rt5616: document mclk clockHeiko Stuebner1-0/+8
Both devicetrees and driver implementation already use the specified mclk in the field, so at least document the clock too, similarly to other Realtek codec. This has the nice additional effect of getting rid of dtbscheck warning. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240830203819.1972536-2-heiko@sntech.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-29ASoC: dt-bindings: amlogic-sound-cards: documentMark Brown2-0/+14
Merge series from Neil Armstrong <neil.armstrong@linaro.org>: Following an off-list discution with Jerome about fixing the following DTBs check errors: sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml# sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml# sound: 'anyOf' conditional failed, one must be fixed: 'clocks' is a required property '#clock-cells' is a required property from schema $id: http://devicetree.org/schemas/clock/clock.yaml# It has been agreed documenting the clock in the sound card is a better solution than moving them to a random clock controller or consumer node which is not related to the actual meaning of those root frequencies. The patchset adds the clocks proprty to the bindings and finally adds the properties to the DT files.
2024-08-29ASoC: dt-bindings: cirrus,cs4271: Convert to dtschemaNikita Shubin2-57/+101
Convert the Cirrus Logic CS4271 audio CODEC bindings to DT schema. Add missing spi-cpha, spi-cpol, '#sound-dai-cells' and port, as they are already being used in the DTS and the driver for this device. Switch to 'reset-gpios' and drop legacy 'reset-gpio' used in original bindings. Based on Animesh Agarwal cs42xx8 conversion patch. Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/all/20240715-ep93xx-v11-0-4e924efda795@maquefel.me Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240829-cs4271-yaml-v3-1-f1624cc838f6@maquefel.me Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-28ASoC: dt-bindings: Convert mxs-saif.txt to fsl,saif.yaml (imx28 saif)Lukasz Majewski2-41/+83
The 'fsl,imx28-saif' compatible has already the mxs-saif.txt description. This patch converts (and removes it) this file to fsl,saif.yaml (to follow current fsl convention). Changes for the mxs-saif.txt: - Adds 'clocks', '#clock-cells' and '#sound-dai-cells' properties - Provide device description Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240828092709.2626359-1-lukma@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-28ASoC: dt-bindings: amlogic,gx-sound-card: document clocks propertyNeil Armstrong1-0/+7
The sound card design is based on reference PLL frequencies that are the root of all clock rates calculations. Today, those frequencies are currently specified in DT via assigned-clocks, because they correspond to the basic audio use-case. It makes no sense to setup clock rates for a sound card without referencing the clocks for the sound card, mainly because at some point more complex audio use cases will be supported and those root rates would need to change. To solve this situation, let's legitimize the presence of assigned-clocks in the sound card by documenting those clocks, as it describes a true dependency of the sound card and paths the way of more complex audio uses-cases involving those root frequencies. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-2-58159abf0779@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-28ASoC: dt-bindings: amlogic,axg-sound-card: document clocks propertyNeil Armstrong1-0/+7
The sound card design is based on reference PLL frequencies that are the root of all clock rates calculations. Today, those frequencies are currently specified in DT via assigned-clocks, because they correspond to the basic audio use-case. It makes no sense to setup clock rates for a sound card without referencing the clocks for the sound card, mainly because at some point more complex audio use cases will be supported and those root rates would need to change. To solve this situation, let's legitimize the presence of assigned-clocks in the sound card by documenting those clocks, as it describes a true dependency of the sound card and paths the way of more complex audio uses-cases involving those root frequencies. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-1-58159abf0779@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-20ASoC: dt-bindings: Convert tpa6130a2.txt to yamlFrank Li2-27/+55
Convert binding doc tpa6130a2.txt to yaml format. Additional change: - add ref to dai-common.yaml - add i2c node in example Fix below warning: arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a20000/amp@60: failed to match any schema with compatible: ['ti,tpa6130a2'] Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20240820184604.499017-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-20ASoC: dt-bindings: samsung,odroid: drop stale clocksKrzysztof Kozlowski1-5/+0
Clocks property was present only to allow usage of assigned-clocks in the sound card node, however in upstream DTS the assigned-clocks were moved in commit 4afb06afd768 ("ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4") to respective I2S nodes. Linux drivers never parsed "clocks" so it can be safely dropped. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240818173037.122152-1-krzysztof.kozlowski@linaro.org Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-19ASoC: dt-bindings: serial-midi: reference serial-peripheral-props.yamlKrzysztof Kozlowski1-0/+3
Reference common serial properties schema (for children of UART controllers) to bring common definition of "current-speed" and "max-speed" properties. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-6-1dba258b7492@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-08-19ASoC: Intel: Remove skylake driverMark Brown4-5/+7
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: A spiritual successor to haswell/baytrail removal series [1]. The avs-driver found in sound/soc/intel/avs is a direct replacement to the existing skylake-driver. It covers all features supported by it and more and aligns with the recommended flows and requirements based on Windows driver equivalent. The skylake-driver related UAPI has been removed with "ASoC: Drop soc-topology ABI v4 support" [2]. For the official kernel tree the deprecation begun with v6.0. Most skylake-drivers users moved to avs- or SOF-driver when AudioDSP capabilities are available on the platform or to snd-hda-intel (sound/pci/hda) when such capabilities are not. For the supported trees the deprecation begun with v5.4 with v5.15 being the first where the skylake-driver is disabled entirely. All machine board drivers that consume this DSP driver have their replacements present within sound/soc/intel/avs/boards/ directory. [1]: https://lore.kernel.org/alsa-devel/20201006064907.16277-1-cezary.rojewski@intel.com/ [2]: https://lore.kernel.org/alsa-devel/20240403091629.647267-1-cezary.rojewski@intel.com/
2024-08-19ASoC: dt-bindings: convert tlv320aic31xx.txt to yamlFrank Li2-77/+127
Convert binding doc tlv320aic31xx.txt to yaml format. Additional change: - add i2c node in example. - replace MICBIAS_OFF with MICBIAS_2_0v in example because MICBIAS_OFF have been defined in header file. - add ref to dai-common.yaml. - add #sound-dai-cells. Fix below warning: arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a30000/codec@18: failed to match any schema with compatible: ['ti,tlv320dac3100'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240814174422.4026100-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-16ASoC: dt-bindings: qcom,lpass-wsa-macro: correct clocks on SM8250Srinivas Kandagatla1-20/+2
we seems to have ended up with duplicate clocks for frame-sync on sm8250, it has both va and fsgen which are exactly same things. Remove the redundant va clock and make it align with other SoCs. Codec driver does not even handle va clock, so remove this from the bindings and examples to avoid any confusion. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240815165320.18836-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-08ASoC: dt-bindings: qcom,wcd939x: Correct reset GPIO polarity in exampleKrzysztof Kozlowski1-2/+2
The reset GPIO of WCD9390/WCD9395 is active low and that's how it is routed on typical boards, so correct the example DTS to use expected polarity, instead of IRQ flag (which is a logical mistake on its own). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240806114931.40090-4-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-08ASoC: dt-bindings: qcom,wcd938x: Correct reset GPIO polarity in exampleKrzysztof Kozlowski1-1/+2
The reset GPIO of WCD9380/WCD9385 is active low and that's how it is routed on typical boards, so correct the example DTS to use expected polarity. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240806114931.40090-3-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-08ASoC: dt-bindings: qcom,wcd934x: Correct reset GPIO polarity in exampleKrzysztof Kozlowski1-1/+2
The reset GPIO of WCD9340/WCD9341 is active low and that's how it is routed on typical boards, so correct the example DTS to use expected polarity. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240806114931.40090-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-08ASoC: dt-bindings: qcom,wcd937x: Correct reset GPIO polarity in exampleKrzysztof Kozlowski1-1/+1
The reset GPIO of WCD9370/WCD9375 is active low and that's how it is routed on typical boards, so correct the example DTS to use expected polarity. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240806114931.40090-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-29Add HDMI Audio supportMark Brown1-0/+4
Merge series from Biju Das <biju.das.jz@bp.renesas.com>: This patch series aims to add HDMI audio support for RZ/{G2L,G2LC,V2L} SMARC EVKs.
2024-07-29ASoC: dt-bindings: dlg,da7213: Convert to json-schemaGeert Uytterhoeven2-45/+103
Convert the Dialog Semiconductor DA7212/DA7213 Audio Codec Device Tree binding documentation to json-schema. Add missing properties. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/7645c9024a1762d281f4067504bc32a7a3d27caa.1721649741.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-29ASoC: dt-bindings: qcom,apq8016-sbc-sndcard: move to separate bindingKrzysztof Kozlowski2-137/+205
The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from others: they have additional IO muxing address space and pin control. Move them to separate schema, so the original qcom,sm8250.yaml will be easier to manage. New schema is going to grow for other platforms having more of IO muxing address spaces. Cc: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240723083300.35605-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-29ASoC: dt-bindings: fsl,imx-audio-es8328: Convert to dtschemaAnimesh Agarwal2-60/+111
Convert the Freescale i.MX audio complex with ES8328 codec bindings to DT schema format. Cc: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240722063657.23018-1-animeshagarwal28@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-29ASoC: dt-bindings: ti,pcm512x: Convert to dtschemaAnimesh Agarwal2-53/+101
Convert the PCM512x and TAS575x audio CODECs/amplifiers bindings to DT schema format. Add missing sound-dai-cells property. Cc: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240717134729.51661-1-animeshagarwal28@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-29ASoC: dt-bindings: renesas,rz-ssi: Document port propertyBiju Das1-0/+4
Document optional port property that connects to I2S signals. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20240725084559.13127-2-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-12ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschemaAnimesh Agarwal2-34/+81
Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT schema format. Set power supply properties to required only for CS42888. Cc: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240710072756.99765-1-animeshagarwal28@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-11ASoC: dt-bindings: convert qcom sound bindings toMark Brown4-148/+56
Merge series from Rayyan Ansari <rayyan.ansari@linaro.org>: These patches convert the remaining plain text bindings for Qualcomm sound drivers to dt schema, so device trees can be validated against them.
2024-07-10ASoC: dt-bindings: cirrus,cs4270: Convert to dtschemaAnimesh Agarwal2-21/+59
Convert the Cirrus Logic CS4270 audio CODEC bindings to DT schema. Add missing va-supply, vd-supply and vlc-supply properties, because they are already being used in the DTS and the driver for this device. Cc: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709184231.125207-1-animeshagarwal28@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-10ASoC: dt-bindings: qcom,apq8096-sndcard: use dtschemaRayyan Ansari2-128/+1
Remove old txt bindings and add apq8096 soundcard entry to existing dt schema. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240710113833.39859-4-rayyan.ansari@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-10ASoC: dt-bindings: qcom,msm8916-wcd-digital-codec: convert to dtschemaRayyan Ansari2-20/+55
Convert the Qualcomm MSM8916 WCD Digital Audio Codec bindings from text to yaml dt schema format. Make bindings complete by adding #sound-dai-cells. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240710113833.39859-2-rayyan.ansari@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-08ASoC: dt-bindings: update fsl-asoc-card bindings after imx-spdif mergeElinor Montmasson2-70/+49
The S/PDIF audio card support with compatible "fsl,imx-audio-spdif" was merged from imx-spdif into the fsl-asoc-card driver. It makes possible to use an S/PDIF with an ASRC. This merge introduces new DT bindings to use with compatible "fsl,imx-audio-spdif" to follow the way fsl-asoc-card works: * the "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an SPDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". In an upcoming commit, in-tree DTs will be modified to follow these new properties: * Property "spdif-controller" will be renamed "audio-cpu". * spdif_transmitter and spdif_receiver nodes will be declared and linked to the fsl-asoc-card node with the property "audio-codec". To keep backward compatibility with other DTs, support for "spdif-controller", "spdif-in" and "spdif-out" properties is kept. However, it is recommended to use the new properties if possible. It is better to declare transmitter and/or receiver in DT than using the dummy codec. DTs using compatible "fsl,imx-audio-spdif" are still supported, and fsl-asoc-card will behave the same as imx-spdif for these DTs. Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240627083104.123357-6-elinor.montmasson@savoirfairelinux.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-04dt-bindings: sound: fsl,qmc-audio: Add support for multiple QMC channels per DAIHerve Codina1-6/+35
The QMC audio uses one QMC channel per DAI and uses this QMC channel to transmit interleaved audio channel samples. In order to work in non-interleave mode, a QMC audio DAI needs to use multiple QMC channels. In that case, the DAI maps each QMC channel to exactly one audio channel. Allow QMC audio DAIs with multiple QMC channels attached. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240701113038.55144-10-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-02Add master clock handling for nau8824Mark Brown1-0/+8
Merge series from Maxim Kochetkov <fido_max@inbox.ru>: nau8824 has external MCLK pin. So add enable/disable external clock management.
2024-07-02ASoC: dt-bindings: realtek,rt5645: Convert to dtschemaAnimesh Agarwal2-82/+131
Convert the RT5650/RT5645 audio CODEC bindings to DT schema. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://patch.msgid.link/20240702120106.17100-1-animeshagarwal28@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-02ASoC: dt-bindings: nau8824: Add master clock handlingMaxim Kochetkov1-0/+8
Use master clock "mclk" if provided through device tree. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240701211631.92384-2-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-02ASoC: simple-audio-mux: add state-labelsMark Brown1-0/+6
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: simple-audio-mux is designed to be used generally, thus "Input 1" or "Input 2" are used to selecting MUX input. This numbered inputs would work, but might be not user friendly in some case, for example in case of system hardware design has some clear labels. Adds new "state-labels" property and enable to select MUX by own state names. Original > amixer set "MUX" "Input 1" > amixer set "MUX" "Input 2" Use mux-names sound_mux: mux { compatible = "simple-audio-mux"; mux-gpios = <...>; => state-labels = "Label_A", "Label_B"; }; > amixer set "MUX" "Label_A" > amixer set "MUX" "Label_B"
Powered by cgit, Gruvboxed by Blaster4385.