aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/light
AgeCommit message (Collapse)AuthorFilesLines
2024-08-03dt-bindings: iio: light: stk33xx: add compatible for stk3013Kaustabh Chakraborty1-4/+9
STK3013 is a proximity sensor by Sensortek, bearing chipid of 0x31. Despite being marketed as a proximity sensor, it also appears to have ambient light sensing capabilities. The part is fully compatible with the existing implementation of the device driver. Add the compatible string of stk3013 to the existing list, with a fallback of stk3310. Signed-off-by: Kaustabh Chakraborty <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-08-03dt-bindings: iio: light: ROHM BH1745Mudit Sharma1-0/+53
Add ROHM BH1745 - 4 channel I2C colour sensor's dt-bindings. Signed-off-by: Mudit Sharma <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-08-03dt-bindings: iio: light: ltrf216a: Document LTR-308 supportMarek Vasut1-1/+3
Document LiteOn LTR-308 support in LTR-F216A bindings. The two devices seem to have almost identical register map, except that the LTR-308 does not have three CLEAR_DATA registers, which are unused by this driver. Furthermore, LTR-308 and LTR-F216A use different lux calculation constants, 0.6 and 0.45 respectively. https://optoelectronics.liteon.com/upload/download/DS86-2016-0027/LTR-308ALS_Final_%20DS_V1%201.pdf https://optoelectronics.liteon.com/upload/download/DS86-2019-0016/LTR-F216A_Final_DS_V1.4.PDF Signed-off-by: Marek Vasut <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-08-03dt-bindings: iio: BU27034 => BU27034ANUCMatti Vaittinen1-6/+5
The BU27034NUC was cancelled before it entered mass production. It was replaced by a new variant BU27034ANUC (note, added 'A'). The new variant gained a few significant changes, like removal of the 3.rd data channel and dropping some of the gain settings. This means that, from software point of view these ICs are incompatible. Lux calculation based on the data from the sensors needs to be done differently, and on the BU27034ANUC the channel 3 data is missing. Also, the gain setting differencies matter. Unfortunately, the identification register was not changed so there is no safe way for the software to distinguish the variants. According to the ROHM HQ engineers, the old BU27034NUC should not be encountered in the wild. Hence it makes sense to remove the support for the old BU27034NUC and add support for the new BU27034ANUC. Change the compatible in order to not load the incompatible old driver for new sensor (or, if someone had the old sensor, the new driver for it). Drop the compatible for old sensor which should not be in the wild and add a new compatible for the new model with accurate model suffix 'anuc'. Rename the file to match the new compatible. Signed-off-by: Matti Vaittinen <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://patch.msgid.link/c39f9c67b3c07a27d7a13109c7b69cff9cfd2b9b.1720176341.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2024-06-13dt-bindings: iio: light: add VEML6040 RGBW-LSArthur Becker1-2/+7
Device tree bindings for the vishay VEML6040 RGBW light sensor iio driver Signed-off-by: Arthur Becker <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-03-25dt-bindings: iio: light: Avago APDS9306Subhajit Ghosh1-0/+2
Extend avago,apds9300.yaml schema file to support apds9306 device. Acked-by: Conor Dooley <[email protected]> Signed-off-by: Subhajit Ghosh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-03-25dt-bindings: iio: light: adps9300: Update interrupt definitionsSubhajit Ghosh1-1/+3
Include irq.h and irq level macro in the example for readability Acked-by: Conor Dooley <[email protected]> Signed-off-by: Subhajit Ghosh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-03-25dt-bindings: iio: light: adps9300: Add missing vdd-supplySubhajit Ghosh1-0/+3
All devices covered by the binding have a vdd supply. Acked-by: Conor Dooley <[email protected]> Signed-off-by: Subhajit Ghosh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-03-25dt-bindings: iio: light: Merge APDS9300 and APDS9960 schemasSubhajit Ghosh2-48/+7
Merge very similar schemas for APDS9300 and APDS9960. Suggested-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Subhajit Ghosh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-02-28dt-bindings: iio: light: vishay,veml6075: make vdd-supply requiredJavier Carrasco1-0/+1
The VEML6075 requires a single supply to operate. The property already exists in the bindings and it is used in the example, but it is still not on the list of required properties. Signed-off-by: Javier Carrasco <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-01-22dt-bindings: iio: light: as73211: add support for as7331Javier Carrasco1-2/+5
This device has the same properties and I2C addresses as the as73211. The only difference between them is the photodiodes they use internally, which in this case is irrelevant for the bindings. Acked-by: Conor Dooley <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2023-12-11dt-bindings: iio: light: add ltr390Anshul Dalal1-0/+56
Add binding for Lite-On LTR390 which is an Ambient/UV light sensor that communicates over i2c with an address of 0x53. Datasheet: https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Anshul Dalal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-12-04dt-bindings: iio: light: add support for Vishay VEML6075Javier Carrasco1-0/+39
The Vishay VEML6075 is a 16-bit digital UVA and UVB sensor with I2C interface. Add bindings and an example for the Vishay VEML6075. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-10-05dt-bindings: iio: rohm,bu27010: add missing vdd-supply to exampleKrzysztof Kozlowski1-0/+1
Bindings require vdd-supply but the example DTS was missing one. This fixes dt_binding_check error: Documentation/devicetree/bindings/iio/light/rohm,bu27010.example.dtb: light-sensor@38: 'vdd-supply' is a required property Fixes: ce2a8c160066 ("dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor") Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Rob Herring <[email protected]> Reviewed-by: Matti Vaittinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-08-08dt-bindings: iio: ROHM BU27010 RGBC + flickering sensorMatti Vaittinen1-0/+49
The ROHM BU27010 is a sensor with 6 photodiodes (red, green, blue, clear, IR and flickering detection) with five configurable channels. Red, green and flickering detection being always available and two out of the rest three (blue, clear, IR) can be selected to be simultaneously measured. Typical application is adjusting LCD/OLED backlight of TVs, mobile phones and tablet PCs. Add binding document for ROHM BU27010. Signed-off-by: Matti Vaittinen <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/717d30694ba6864b8c28772d7478bed93ea10138.1690958450.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-23dt-bindings: iio: light: ROHM BU27008Matti Vaittinen1-0/+49
The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear and IR) with four configurable channels. Red and green being always available and two out of the rest three (blue, clear, IR) can be selected to be simultaneously measured. Typical application is adjusting LCD backlight of TVs, mobile phones and tablet PCs. Add BU27008 dt-bindings. Signed-off-by: Matti Vaittinen <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/f24196e11ee73511312b629daa20c7d783d8bf6c.1683541225.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13dt-bindings: iio: light: Document TI OPT4001 light sensorStefan Windfeldt-Prytz1-0/+68
Add devicetree bindings for opt4001 ambient light sensor. Signed-off-by: Stefan Windfeldt-Prytz <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-04-10dt-bindings: iio: light: Support ROHM BU27034Matti Vaittinen1-0/+46
ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes capable of detecting a very wide range of illuminance. Typical application is adjusting LCD and backlight power of TVs and mobile phones. Add dt-bindings. Signed-off-by: Matti Vaittinen <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/66a222574176ee2adbfccf6d9a591c04571a18d9.1680263956.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2022-08-15dt-bindings: Document ltrf216a light sensor bindingsShreeya Patel1-0/+49
Add devicetree bindings for ltrf216a ambient light sensor. Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Shreeya Patel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-04-28dt-bindings: iio: light: stk33xx: Add proximity-near-levelArnaud Ferraris1-0/+6
This allows exporting the value from which userspace should assert an object is "near". Signed-off-by: Arnaud Ferraris <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-12-04dt-bindings: iio: light: ltr501: Add proximity-near-levelNikita Travkin1-0/+7
This value inidcates the proximity level that should be considered "close". Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-10-20dt-bindings: iio: light: Document ltr501 light sensor bindingsNikita Travkin1-0/+51
Add devicetree bindings for ltr501, ltr559 and ltr301. Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-05-17dt-bindings: iio: light: Added AMS tsl2591 device tree bindingJoe Sandom1-0/+50
Device tree binding for AMS/TAOS tsl2591 ambient light sensor. This driver supports configuration via device tree and sysfs. Supported channels for raw infrared light intensity, raw combined light intensity and illuminance in lux. The driver additionally supports iio events on lower and upper thresholds. This is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal. Signed-off-by: Joe Sandom <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-03-23dt-bindings: Clean-up undocumented compatible stringsRob Herring1-2/+2
Adding checks for undocumented compatible strings reveals a bunch of warnings in the DT binding examples. Fix the cases which are typos, just a mismatch between the schema and the example, or aren't documented at all. In a couple of cases, fixing the compatible revealed some schema errors which are fixed. There's a bunch of others remaining after this which have bindings, but those aren't converted to schema yet. Cc: Thierry Reding <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Pavel Machek <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Stephen Boyd <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Kishon Vijay Abraham I <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Acked-by: Maxime Ripard <[email protected]> Acked-by: Vinod Koul <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Acked-by: Alain Volmat <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-23dt-bindings: More cleanup of standard unit propertiesRob Herring1-1/+0
Properties with standard unit suffixes already have a type and don't need type references. Fix a few more cases which have gotten added. Cc: Bjorn Andersson <[email protected]> Cc: Zhang Rui <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Kevin Tsai <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]> Acked-by: Dmity Baryshkov <[email protected]> Acked-by: Mark Brown <[email protected]> Reviewed-by: Luca Ceresoli <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-18dt-bindings: Fix JSON pointersRob Herring1-1/+1
The correct syntax for JSON pointers begins with a '/' after the '#'. Without a '/', the string should be interpreted as a subschema identifier. The jsonschema module currently doesn't handle subschema identifiers and incorrectly allows JSON pointers to begin without a '/'. Let's fix this before it becomes a problem when jsonschema module is fixed. Converted with: perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"` Cc: Maxime Ripard <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Pavel Machek <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Mark Brown <[email protected]> Cc: [email protected] Acked-By: Vinod Koul <[email protected]> Acked-by: Lee Jones <[email protected]> Acked-by: Guenter Roeck <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Acked-by: Florian Fainelli <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2020-12-03dt-bindings:iio:light:capella,cm3605: txt to yaml conversion.Jonathan Cameron2-41/+79
Simple conversion using the new iio-consumers.yaml binding in the dt-schema. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-24Merge tag 'iio-for-5.11a' of ↵Greg Kroah-Hartman21-251/+486
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.11 cycle Usual mixed bag of new drivers / device support + cleanups etc with the addition of a fairly big set of yaml conversions. Txt to yaml format conversions. In some cases dropped separate binding and moved to trivial devices (drop). Listed by manufacturer - dht11 temperature(drop) - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303 adi,adis16480 adi,adf4350 - ams,as3935 - asahi-kasei,ak8974 - atmel,sama5d2-adc - avago,apds9300 avago,apds9960 - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180 - brcm,iproc-static-adc - capella,cm36651 - domintech,dmard06(drop) - fsl,mag3110 fsl,mma8452 fsl,vf610-dac - hoperf,hp03 - honeywell,hmc5843 - kionix,kxcjk1013 - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102 maxim,max31856 maxim,max31855k maxim,max44009 maxim,max5481 maxim,max5821 - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop) - mediatek,mt2701-auxadc - melexis,mlx90614 melexis,mlx90632 - memsic,mmc35240(drop) - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725 - murata,zap2326 - nxp,fxas21002c nxp,lpc1850-dac - pni,rm3100 - qcom,pm8018-adc qcom,spmi-iadc - renesas,isl29501 renesas,rcar-gyroadc - samsung,sensorhub-rinato - sensiron,sgp30 - sentech,sx9500 - sharp,gp2ap020a00f - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180 - ti,adc084s021 ti,ads124s08 ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612 ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07 - upisemi,us51882 - vishay,vcnl4035 - x-powers,axp209 New device support * adi,ad5685 - Add support for AD5338R dual output 10-bit DAC - Add DT-binding doc. * mediatek,mt6360 - New driver for this SoC ADC with bindings and using new channel label support in the IIO core. * st,lsm6dsx - Add support for LSM6DST Core: * Add "label" to device channels, provided via a new core callback. Including DT docs for when that is the source, and ABI docs. * Add devm_iio_triggered_buffer_setup_ext to take extra attributes. * dmaengine, unwrap use of iio_buffer_set_attrs() * Drop iio_buffer_set_attrs() * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if no handler has run. * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect any known existing drivers, but will impact a future one. * kernel-doc fix in trigger.h * file-ops ordering cleanup Features * semtech,sx9310 - Add control of hardware gain, proximity thresholds, hysteresis and debounce. - Increase what information on hardware configuration can be provided via DT. Cleanup and minor features * adi,ad5685 - Add of_match_table * adi,ad7292 - Drop pointless spi_set_drvdata() call * adi,ad7298 - Drop platform data and tidy up external reference config. * adi,ad7303 - Drop platform data handling as unused. * adi,ad7768 - Add new label attribute for channels provided from dt. * adi,ad7887 - devm_ usage in probe simplifying remove and error handling. * adi,adis16201 - Drop pointless spi_set_drvdata() call * adi,adis16209 - Drop pointless spi_set_drvdata() call * adi,adis16240 - White space fixup * adi,adxl372 - use new devm_iio_triggered-buffer_setup_ext() * amlogic,meson-saradc - Drop pointless semicolon. * amstaos,tsl2563 - Put back i2c_device_id table as needed for greybus probing. * atmel,at91_adc - Use of_device_get_match_data() instead of open coding it. - Constify some driver data - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr() - Drop platform data as mostly dead code. - Tidy up reference voltage logic * atmel-sama5d2 - Drop a pointless semicolon - Merge buffer and trigger init into a separate function - Use new devm_iio_triggered_buff_setup_ext() * avago,apds9960 - Drop a pointless semicolon * bosch,bmc150 - Drop a pointless semicolon - Use new iio_triggered_buffer_setup_ext() * bosch,bmp280 - Drop a pointless semicolon * fsl,mma8452 - Constification * (google),cros_ec - Use new devm_iio_triggered_buffer_setup_ext() * hid-sensors - Use new iio_triggered_buffer_setup_ext() * ingenic,adc - Drop a pointless semicolon * invensense,icm426xx - Fix MAINTAINERS entry missing : * mediatek,mt6577_audxac - Add binding doc for mt8516 compatible with mt8173 * motorola,cpcap-adc - Fix an implicit fallthrough marking that clang needs to avoid warning. * samsung,exynos-adc - Stop relying on users counter form input device in ISR. * st,lsm6dsx - add vdd and vddio regulator control (including binding update) * st,stm32-adc - Tidy up code for dma transfers. - Adapt clock duty cycle for proper functioning. Note no known problems with existing boards. * st,vl53l0x-i2c - Put back i2c_device_id table as needed for greybus probing. * vishay,vcnl4035 - Put back i2c_device_id table as needed for greybus probing. * tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion. dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion. dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion. dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion dt-bindings:iio:light:st,vl6180: txt to yaml format conversion. dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion. dt-bindings:iio:light:ti,opt3001: txt to yaml conversion dt-bindings:iio:light:maxim,max44009: txt to yaml conversion. dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion. dt-bindings:iio:light:capella,cm36651: txt to yaml conversion. dt-bindings:iio:light:avago,apds9960: txt to yaml conversion dt-bindings:iio:light:avago,apds9300: txt to yaml conversion. dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion ...
2020-11-22dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.Jonathan Cameron2-15/+45
I'm not sure anyone would use this part primarily as an ALS, given the time of flight laser also present, but I'll stick with the original decision on where to put the binding. Added interrupts property as the device has a GPIO interrupt even if the driver is not currently using it. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Manivannan Sadhasivam <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Cc: Peter Meerwald-Stadler <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversionJonathan Cameron2-18/+45
Only significant change in here was dropping the statement that the i2c address should be 60. The datasheet suggests there are variants available with several different addresses. Parthiban's email address is bouncing, so I've listed myself as maintainer for this one until someone else steps up. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensorJonathan Cameron2-22/+42
For the example, node name is uv-sensor because the standard option of light-sensor seemed a little too generic for this. This one could have just been moved to trivial-devices.yaml but for now I have kept it as a separate doc. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.Jonathan Cameron2-45/+78
I don't have an up to date address for Adriana Reus so I've put myself as the binding maintainer for this one. I'm happy to hand over to Adriana or anyone else who wants take it on! This has a lot of optional tuning parameters. The docs are modified to try and put the default values in the description of each one rather than a forwards reference to the example. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:ti,opt3001: txt to yaml conversionJonathan Cameron2-25/+47
Straight forward format conversion of this simple binding. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Andreas Dannenberg <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.Jonathan Cameron2-24/+45
Straight forward format conversion. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Robert Eshleman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.Jonathan Cameron2-21/+48
Simple conversion. Jacek's email bounced, by Kyungmin's still seems good so just dropped Jacek from maintainer list. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Kyungmin Park <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.Jonathan Cameron2-26/+48
Straight forward conversion with no changes beyond the node name in the example Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Beomho Seo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:avago,apds9960: txt to yaml conversionJonathan Cameron2-21/+44
Very simple binding that we could move into trivial-devices.yaml with a small loss of documentation. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Matt Ranostay <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.Jonathan Cameron2-21/+44
This could have gone in trivial-devices.yaml, but there was a datasheet link so I've given it a minimal file of it's own. Very simple binding and so a very simple conversion. Oleksandr's email address is bouncing so I've put myself as fallback maintainer until someone else steps forward. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-16dt-bindings:iio:light:renesas,isl29501: Move to trivial devices.Jonathan Cameron1-13/+0
This binding is so simple there is no obvious advantage in maintaining a separate binding doc file for it. As such, move it to trivial-devices.yaml Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-15Merge tag 'staging-5.10-rc1' of ↵Linus Torvalds2-0/+58
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no staging drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits) staging: comedi: check validity of wMaxPacketSize of usb endpoints found staging: wfx: improve robustness of wfx_get_hw_rate() staging: wfx: drop unicode characters from strings staging: wfx: gpiod_get_value() can return an error staging: wfx: increase robustness of hif_generic_confirm() staging: wfx: wfx_init_common() returns NULL on error staging: wfx: standardize the error when vif does not exist staging: wfx: check memory allocation staging: wfx: improve error handling of hif_join() staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c staging: rtl8188eu: Fix long lines dt-bindings: staging: wfx: silabs,wfx yaml conversion staging: wfx: update copyrights dates staging: wfx: fix QoS priority for slow buses staging: wfx: fix BA sessions for older firmwares staging: wfx: remove remaining code of 'secure link' feature staging: wfx: fix handling of MMIC error staging: vchiq: Fix list_for_each exit tests staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t ...
2020-10-06dt-bindings: Another round of adding missing 'additionalProperties'Rob Herring4-0/+8
Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Cc: Linus Walleij <[email protected]> Cc: Stephen Boyd <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Baolin Wang <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Daniel Lezcano <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Acked-By: Vinod Koul <[email protected]> Acked-by: Lee Jones <[email protected]> Acked-by: Ulf Hansson <[email protected]> Acked-by: Jonathan Cameron <[email protected]> # for iio Acked-by: Thierry Reding <[email protected]> Acked-by: Mark Brown <[email protected]> Reviewd-by: Corey Minyard <[email protected]> Acked-by: Pavel Machek <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2020-09-21dt-bindings: iio: vishay,vcnl4000: add interrupts propertyKrzysztof Kozlowski1-0/+4
The dtschema should list all properties, including the common ones like interrupts. This fixes dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dt.yaml: prox@60: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2020-08-22dt-bindings: iio: light: add AMS AS73211 supportChristian Eggers1-0/+54
Add DT bindings for AMS AS73211 XYZ True Color Sensor. Signed-off-by: Christian Eggers <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-08-14dt-bindings: Whitespace clean-ups in schema filesRob Herring1-11/+11
Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Acked-by: Sam Ravnborg <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-07-17Merge tag 'iio-for-5.9a-take2' of ↵Greg Kroah-Hartman4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, cleanups and features for IIO in the 5.9 cycle Some new devices, but particularly good this time is the core rework coming from Alexandru. Some of this has been in Analog's tree a long time, but other parts are motivated by closing down common mistakes in new drivers. Changes since first try at this pull request: * Add missed patch to actually remove iio_priv_to_dev and as a result also drop a few ingenic patches that need to be updated to take this into account. * Fix an ordering issue int he pollfunc attach in the core rework. New device support * qcom pmic7 adc - New driver using common qcom-vadc library. Some associated cleanups and refactors. * invensense icm42600 - New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c or spi. These are all 6 axis IMUs with gyro and accelerometers. Driver supports buffered modes using the hardware fifo and interpolation for accurate timestamps. * sensirion scd30 - New driver for this carbon dioxide sensor including i2c and serial interfaces + bindings. Features * ak8975 - Add reset gpio support. * bma400 - Support SPI. * bmc150 - Document and add support for bmc156b and bmm150b, tidy up _magn endings. * bmi160 - Regulator and mount matrix support. * mxc4005 - Add ID for mxc6655 * rockchip-saradc - Triggered buffer support. DT bindings * qcom spmi-vadc converted to yaml + pmic7 bindings * ak8975 tidy up and convert to yaml + add reset-gpio binding * ingenic-adc -convert to yaml. Core rework all carried through by Alexandru Ardelean. * Assign parent device in the core rather than every driver. A few devices need to provide specific non standard parents, so there is support for overriding. * Start to take parts of struct iio_dev opaque to the drivers. This will be a long term job, but should reduce the number of drivers we get that use parts that are currently only 'internal' by documentation. * Move attach and detach of pollfunc to the core. Every triggered buffer using driver had to do the same thing, so lets do it in the core. The hard part here was getting all the drivers into canonical form so there would be no functional changes in this final patch. That's taken quite a lot of work over last couple of cycles! Cleanups and minor fixes. * docs - Improve IIO_CONCENTRATION channel type description in ABI docs. - Drop doubled word cases. - Http to Https conversion. * core - Make iio_device_get_drvdata take a const struct iio_dev * avoiding some nasty casts. * ADCs - Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these drivers and get coppied into lots of new drivers. * ad5380 - Constify iio_chan_spec_ext_info * ad5592r - Constify iio_chan_spec_ext_info - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * ad8366 - Make gpio optional as doesn't matter if its there or not. * adis16480 - Use irq types instead of the flags. * atlas-ezo-sensor - Minimize scope of ret variable. * at91-adc - Add COMPILE_TEST dependency to driver to improve build coverage. - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * at91-sama5d2 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) - Drop Ludovic as a co-maintaienr. * cros_ec - Reapply the range after resume. - Add a read only frequency entry for legacy version. - Typo fixes * hts221 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * inv_mpu - Drop double check on ACPI companion device. * iqs621 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * iqs624 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * max11100 - Constify iio_chan_spec * mmc35240 - Constify reg_default * rockchip-saradc - Move to managed allocators for everything in probe. - Use more distinctive prefix for channel macros. * stk3310 - Constify regmap_config. * stm32-adc - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * stm32-dfsdm-adc - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * ti-am335x - Use managed allocations where straight forward in probe function. * tsl2563 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits) iio: buffer: fix attach/detach pollfunc order iio: core: remove iio_priv_to_dev() helper Replace HTTP links with HTTPS ones: drivers/iio Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio dt-bindings: iio/adc: Convert ingenic-adc docs to YAML. iio: cros_ec_accel_legacy: Add Read Only frequency entries MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc() iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections. iio:adc:ti-adc161s626: Drop of_match_ptr protection. iio:adc:ti-adc084s021: drop of_match_ptr protection iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include ...
2020-07-13Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iioAlexander A. Klimov4-4/+4
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Reviewed-by: Matt Ranostay <[email protected]> #for Matt's drivers Signed-off-by: Jonathan Cameron <[email protected]>
2020-06-11dt-bindings: Remove more cases of 'allOf' containing a '$ref'Rob Herring1-3/+2
Another round of 'allOf' removals that came in this cycle. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring <[email protected]>
2020-06-07Merge tag 'staging-5.8-rc1' of ↵Linus Torvalds4-43/+99
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver changes for 5.8-rc1 Nothing major, but a lot of new IIO drivers are included in here, along with other core iio cleanups and changes. On the staging driver front, again, nothing noticable. No new deletions or additions, just a ton of tiny cleanups all over the tree done by a lot of different people. Most coding style, but many actual real fixes and cleanups that are nice to see. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits) staging: rtl8723bs: Use common packet header constants staging: sm750fb: Add names to proc_setBLANK args staging: most: usb: init return value in default path of switch/case expression staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason staging: vchiq: move vchiq_release_message() into vchiq staging: vchi: Get rid of C++ guards staging: vchi: Get rid of not implemented function declarations staging: vchi: Get rid of vchiq_status_to_vchi() staging: vchi: Get rid of vchi_service_set_option() staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message() staging: vchiq: Move copy callback handling into vchiq staging: vchi: Get rid of vchi_queue_user_message() staging: vchi: Get rid of vchi_service_destroy() staging: most: usb: use function sysfs_streq staging: most: usb: add missing put_device calls staging: most: usb: use correct error codes staging: most: usb: replace code to calculate array index staging: most: usb: don't use error path to exit function on success staging: most: usb: move allocation of URB out of critical section staging: most: usb: return 0 instead of variable ...
2020-05-03dt-bindings: Remove cases of 'allOf' containing a '$ref'Rob Herring1-7/+6
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring <[email protected]> Acked-by: Maxime Ripard <[email protected]> Acked-by: Lee Jones <[email protected]> Acked-By: Vinod Koul <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Acked-by: Wolfram Sang <[email protected]> # for I2C Reviewed-by: Linus Walleij <[email protected]> Acked-by: Jonathan Cameron <[email protected]> #for-iio Reviewed-by: Stephen Boyd <[email protected]> # clock Signed-off-by: Rob Herring <[email protected]>
2020-04-23Merge tag 'iio-for-5.8a' of ↵Greg Kroah-Hartman4-43/+99
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new IIO device support, features and cleanup for the 5.8 cycle Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. * tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits) iio: magnetometer: ak8974: Silence deferred-probe error Documentation: ABI: document IIO in_proximity_nearlevel file iio: vcnl4000: Export near level property for proximity sensor dt-bindings: iio: light: vcnl4000: Add proximity-near-level dt-bindings: iio: Introduce common properties for iio sensors dt-bindings: iio: vcnl4000: convert bindings to YAML format iio: Fix misspellings of "Analog Devices" iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource iio: adc: at91-adc: Use devm_platform_ioremap_resource iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk* iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions. iio:chemical:bme680: Tidy up parameters to regmap_bulk_read iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver iio: buffer: drop devm_iio_kfifo_free() API call iio: buffer: drop devm_iio_hw_consumer_free() API call ...
Powered by cgit, Gruvboxed by Blaster4385.