| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ad7380-4 is the only device from ad738x family that doesn't have an
internal reference. Moreover its external reference is called REFIN in
the datasheet while all other use REFIO as an optional external
reference. If refio-supply is omitted the internal reference is
used.
Fix the binding by adding refin-supply and makes it required for
ad7380-4 only.
Fixes: 1a291cc8ee17 ("dt-bindings: iio: adc: ad7380: add support for ad738x-4 4 channels variants")
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Signed-off-by: Julien Stephan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
adi,ad5686.yaml and adi,ad5696.yaml duplicate all the I2C device
compatible strings with the exception of "adi,ad5337r". Since
adi,ad5686.yaml references spi-peripheral-props.yaml, drop the I2C
devices from it making it only SPI devices. Update the titles to make
the distinction clear.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Signed-off-by: Yu-Chun Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add compatible binding for the axp717.
Acked-by: Jonathan Cameron <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Chris Morgan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add device tree bindings for aw96103/aw96105 proximity sensor.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: shuaijie wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The Sophgo CV1800B SARADC is a Successive Approximation ADC that can be
found in the Sophgo CV1800B SoC.
Signed-off-by: Thomas Bonnefille <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Document asahi-kasei,ak09918 compatible as a fallback compatible,
ak09918 is register compatible with ak09912.
Signed-off-by: Danila Tikhonov <[email protected]>
Signed-off-by: Barnabás Czémán <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Fabrice Gasnier <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add device tree documentation for ENS210 family of temperature and
humidity sensors
Signed-off-by: Joshua Felmeden <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add rockchip,rk3576-saradc compatible string.
The saradc on RK3576 is compatible with the one on RK3588, so they are
used together in an arm of the oneOf.
Signed-off-by: Detlev Casanova <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The common-mode-channel property is a scalar, not an array, so we should
not be using items: in the schema when specifying allowable values.
Reported-by: Rob Herring <[email protected]>
Closes: https://lore.kernel.org/linux-iio/CAL_JsqKaddw8FnPfdnhKhHUb8AcTxFadc_eZmxjX0QxFR80=mw@mail.gmail.com/
Fixes: b40cafc11436 ("dt-bindings: iio: adc: add AD4695 and similar ADCs")
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/20240808-iio-adc-ad4695-fix-dt-bindings-v1-1-5cf37b9547b0@baylibre.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Allow to specify the reference voltage used by the SD modulator.
When the SD modulator is defined as an IIO backend, the reference
voltage can be used to evaluate scaling information of the IIO device.
The reference voltage is not used otherwise.
Signed-off-by: Olivier Moysan <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The legacy sd modulator driver registers the sigma delta modulator as
an IIO channel provider. This implementation is not convenient when the
SD modulator has to be cascaded with another IIO device. The scaling
information is distributed across devices, which makes it difficult to
report consistent scaling data on IIO devices.
The solution is to expose these cascaded IIO devices as an aggregate
device, which report global scaling information.
Add IIO backend support to SD modulator to allow scaling information
management.
Signed-off-by: Olivier Moysan <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Change the DFSDM binding to use the new IIO backend framework,
along with the adoption of IIO generic channels.
This binding change allows to add scaling support to the DFSDM.
Keep the legacy binding as deprecated for backward compatibility.
The io-backends property is supported only in generic IIO channel
binding.
- Channel description with the generic binding (Audio and Analog):
Properties superseded by generic properties:
st,adc-channels: becomes "reg" property in channel node
st,adc-channel-names: becomes "label" property in channel node
Properties moved to channel child node:
st,adc-channel-types: becomes st,adc-channel-type
st,adc-channel-clk-src, st,adc-alt-channel
- Analog binding:
DFSDM filter channel is configured as an IIO backend consumer.
Add io-backends property in channel child nodes.
DFSDM is no more configured as a channel consumer from SD modulator.
Use of io-channels in DFSDM node is deprecated.
- Audio binding:
DFSDM audio DAI is configured as a channel consumer from DFSDM filter.
No change compare to legacy.
Signed-off-by: Olivier Moysan <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97fa0 ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Adding ad7386/7/8 single-ended compatible parts, and the corresponding
ad7386-4/7-4/8-4 4 channels.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Julien Stephan <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-1-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
spi: Support MOSI idle configuration
Add support for configuring the idle state of the MOSI signal in
controllers.
|
|
The adf4378 provides only one output channel. Therefore there is only
one gpio available to enable the output. Reflect that into the bindings
using property conditions.
Add product link for the adf4378.
Signed-off-by: Antoniu Miclaus <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
STK3013 is a proximity sensor by Sensortek, bearing chipid of 0x31. Despite
being marketed as a proximity sensor, it also appears to have ambient
light sensing capabilities.
The part is fully compatible with the existing implementation of the
device driver. Add the compatible string of stk3013 to the existing
list, with a fallback of stk3310.
Signed-off-by: Kaustabh Chakraborty <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Sensirion SDP500 is a digital differential pressure sensor. It provides
a digital I2C output. Add devicetree bindings requiring the compatible
string and I2C slave address (reg).
Signed-off-by: Petar Stoykov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add binging for Microchip PAC1921 Power/Current monitor
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Matteo Martelli <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add ROHM BH1745 - 4 channel I2C colour sensor's dt-bindings.
Signed-off-by: Mudit Sharma <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Internal clock of AD719X devices can be made available on MCLK2 pin. Add
clock provider to support this functionality when clock cells property
is present.
The clock source can be either provided externally or the internal clock
is used. Pair of clocks and clock-names property is mutally exclusive
with #clock-cells property.
Modify second example to showcase the mode where internal clock is used.
Signed-off-by: Alisa-Dariana Roman <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
There are actually 4 configuration modes of clock source for AD719X
devices. Either a crystal can be attached externally between MCLK1 and
MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
pin. The other 2 modes make use of the 4.92MHz internal clock.
To configure external clock as either a crystal or a CMOS-compatible
clock, changing the register settings is necessary. Therefore, add clock
name xtal alongside mclk. By selecting one or the other, the register is
configured.
The presence of an external clock source is optional, not required. When
both clocks and clock-names properties are present, an external clock
source is used. If the intention is to use the internal clock, both
properties should be absent. Modify required properties accordingly.
Signed-off-by: Alisa-Dariana Roman <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Document the mount-matrix property, which is used in device trees such
as msm8916-samsung-fortuna-common.dtsi, and supported by the driver.
Signed-off-by: Rayyan Ansari <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Document the KX022-1020 accelerometer, which has the same register
layout as the KX023-1025 and so can use the same driver.
Signed-off-by: Rayyan Ansari <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add device tree bindings for AD4695 and similar ADCs.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: David Lechner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add documentation for ltc2672.
Reviewed-by: Conor Dooley <[email protected]>
Co-developed-by: Michael Hennerich <[email protected]>
Signed-off-by: Michael Hennerich <[email protected]>
Signed-off-by: Kim Seer Paller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add documentation for ltc2664.
Reviewed-by: Conor Dooley <[email protected]>
Co-developed-by: Michael Hennerich <[email protected]>
Signed-off-by: Michael Hennerich <[email protected]>
Signed-off-by: Kim Seer Paller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Introduce a generalized DAC binding that can be used by DACs that have
similar properties adding output-range-microamp and output-range-microvolt.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Kim Seer Paller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add dt-bindings for ADXL380/ADLX382 low noise density, low
power, 3-axis accelerometer with selectable measurement ranges.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Ramona Gradinariu <[email protected]>
Signed-off-by: Antoniu Miclaus <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Document LiteOn LTR-308 support in LTR-F216A bindings.
The two devices seem to have almost identical register map, except that
the LTR-308 does not have three CLEAR_DATA registers, which are unused
by this driver. Furthermore, LTR-308 and LTR-F216A use different lux
calculation constants, 0.6 and 0.45 respectively.
https://optoelectronics.liteon.com/upload/download/DS86-2016-0027/LTR-308ALS_Final_%20DS_V1%201.pdf
https://optoelectronics.liteon.com/upload/download/DS86-2019-0016/LTR-F216A_Final_DS_V1.4.PDF
Signed-off-by: Marek Vasut <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The BU27034NUC was cancelled before it entered mass production. It was
replaced by a new variant BU27034ANUC (note, added 'A'). The new
variant gained a few significant changes, like removal of the 3.rd data
channel and dropping some of the gain settings. This means that, from
software point of view these ICs are incompatible. Lux calculation based
on the data from the sensors needs to be done differently, and on the
BU27034ANUC the channel 3 data is missing. Also, the gain setting
differencies matter.
Unfortunately, the identification register was not changed so there is no
safe way for the software to distinguish the variants.
According to the ROHM HQ engineers, the old BU27034NUC should not be
encountered in the wild. Hence it makes sense to remove the support for
the old BU27034NUC and add support for the new BU27034ANUC. Change the
compatible in order to not load the incompatible old driver for new sensor
(or, if someone had the old sensor, the new driver for it).
Drop the compatible for old sensor which should not be in the wild and
add a new compatible for the new model with accurate model suffix
'anuc'. Rename the file to match the new compatible.
Signed-off-by: Matti Vaittinen <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/c39f9c67b3c07a27d7a13109c7b69cff9cfd2b9b.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
A capacitive proximity sensor
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Yasin Lee <[email protected]>
Link: https://patch.msgid.link/20240702-add-tyhx-hx9023s-sensor-driver-v9-2-c030f1801d9b@gmail.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Since the driver supports several parts that present differences in
their layout and behaviour, it is necessary to describe the differences
from one chip to another.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Guillaume Stols <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Example uses adi,ad7606-8 as compatible, but adi,sw-mode is not
available for it. So remove this property from example.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Guillaume Stols <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add voltage supplies
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Guillaume Stols <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Reword a few descriptions, and normalize the text width to 80 characters.
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Guillaume Stols <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Normalize textwidth to 80 columns on the descriptions.
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Guillaume Stols <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add support for new devices:
* Analog Devices AD9652 16-bit 310 MSPS ADC;
* Analog Devices AD9643 14-Bit, 170/210/250 MSPS ADC;
* Analog Devices AD9649 14-bit 20/40/65/80 MSPS ADC.
Note all these parts have subtle differences in their programming model
(different scales, number of channels, etc..) so fallbacks are not
possible.
Signed-off-by: Nuno Sa <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add device tree documentation for AD4000 series of ADC devices.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Marcelo Schmitt <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Link: https://patch.msgid.link/98c82e0a2a868a1578989fe69527347aa92083d7.1720810545.git.marcelo.schmitt@analog.com
Signed-off-by: Mark Brown <[email protected]>
|
|
The 'single-channel' property is an uint32, not an array, so 'items' is
an incorrect constraint. This didn't matter until dtschema recently
changed how properties are decoded. This results in this warning:
Documentation/devicetree/bindings/iio/adc/adi,ad7192.example.dtb: adc@0: \
channel@1:single-channel: 1 is not of type 'array'
Fixes: caf7b7632b8d ("dt-bindings: iio: adc: ad7192: Add AD7194 support")
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
|
|
Emails to Anson Huang bounce:
Diagnostic-Code: smtp; 550 5.4.1 Recipient address rejected: Access denied.
Add IMX platform maintainers for bindings which would become orphaned.
Acked-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Acked-by: Peng Fan <[email protected]>
Acked-by: Wolfram Sang <[email protected]> # for I2C
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Jonathan Cameron <[email protected]> # for IIO
Acked-by: Andi Shyti <[email protected]>
Acked-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add a new binding for the MT6350 Series (MT6357/8/9) PMIC AUXADC,
providing various ADC channels for both internal temperatures and
voltages, audio accessory detection (hp/mic/hp+mic and buttons,
usually on a 3.5mm jack) other than some basic battery statistics
on boards where the battery is managed by this PMIC.
Also add the necessary dt-binding headers for devicetree consumers.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
AD7606-8 is referred to as AD7606 by Analog Devices. This comment aims
to avoid confusion. Also the compatible names were not sorted by
alphabetical order.
Signed-off-by: Guillaume Stols <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add AD7606-5 datasheet link.
Signed-off-by: Guillaume Stols <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|