aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/humidity
AgeCommit message (Collapse)AuthorFilesLines
2024-08-17dt-bindings: iio: humidity: add ENS210 sensor familyJoshua Felmeden1-0/+55
Add device tree documentation for ENS210 family of temperature and humidity sensors Signed-off-by: Joshua Felmeden <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-03-25dt-bindings: iio: humidity: hdc3020: add reset-gpiosJavier Carrasco1-0/+5
The HDC3020 provides an active low reset signal that is still not described in the bindings. Add reset-gpios to the bindings and the example. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-02-28dt-bindings: iio: humidity: hdc20x0: add optional interrupts propertyJosua Mayer1-0/+3
HDC2010 and HDC2080 humidity sensors both have an interrupt / data-ready signal which can be used for signaling to the host. Add binding for "interrupts" property so that boards wiring this signal may describe the connection. Acked-by: Rob Herring <[email protected]> Signed-off-by: Josua Mayer <[email protected]> Link: https://lore.kernel.org/r/20240219-iio-hdc20x0-interrupt-binding-v7-1-c8ffb39c3768@solid-run.com Signed-off-by: Jonathan Cameron <[email protected]>
2024-02-17dt-bindings: iio: humidity: hdc3020: add interrupt bindings in exampleDimitri Fedrau1-0/+3
Add interrupt bindings in example. Signed-off-by: Dimitri Fedrau <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-12-11dt-bindings: iio: humidity: Add TI HDC302x supportLi peiyu1-0/+55
Add device tree bindings for HDC3020/HDC3021/HDC3022 humidity and temperature sensors. Signed-off-by: Li peiyu <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-08-18dt-bindings: Fix typosBjorn Helgaas1-1/+1
Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-01-28dt-bindings: iio: cleanup examples - indentationKrzysztof Kozlowski1-6/+6
Use 4-space indentation (for cases when it is neither 4 not 2 space). Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Alexandru Lazar <[email protected]> # max1241 Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-01-28dt-bindings: iio: correct node names in examplesKrzysztof Kozlowski2-2/+2
Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in examples. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2020-12-22dt-bindings: Drop unnecessary *-supply schemas propertiesRob Herring1-2/+1
*-supply properties are always a single phandle, so binding schemas don't need a type $ref nor 'maxItems'. A meta-schema check for this is pending once these existing cases are fixed. Cc: Jonathan Cameron <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Acked-by: Sam Ravnborg <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Acked-by: Lee Jones <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2020-12-03dt-bindings: iio: humidity: hts221: introduce vdd regulator bindingsLorenzo Bianconi1-0/+2
Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/9579804f52ccab74a5ca5c7a55b5072b7304bea9.1606045688.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron <[email protected]>
2020-11-24Merge tag 'iio-for-5.11a' of ↵Greg Kroah-Hartman6-74/+93
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.11 cycle Usual mixed bag of new drivers / device support + cleanups etc with the addition of a fairly big set of yaml conversions. Txt to yaml format conversions. In some cases dropped separate binding and moved to trivial devices (drop). Listed by manufacturer - dht11 temperature(drop) - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303 adi,adis16480 adi,adf4350 - ams,as3935 - asahi-kasei,ak8974 - atmel,sama5d2-adc - avago,apds9300 avago,apds9960 - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180 - brcm,iproc-static-adc - capella,cm36651 - domintech,dmard06(drop) - fsl,mag3110 fsl,mma8452 fsl,vf610-dac - hoperf,hp03 - honeywell,hmc5843 - kionix,kxcjk1013 - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102 maxim,max31856 maxim,max31855k maxim,max44009 maxim,max5481 maxim,max5821 - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop) - mediatek,mt2701-auxadc - melexis,mlx90614 melexis,mlx90632 - memsic,mmc35240(drop) - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725 - murata,zap2326 - nxp,fxas21002c nxp,lpc1850-dac - pni,rm3100 - qcom,pm8018-adc qcom,spmi-iadc - renesas,isl29501 renesas,rcar-gyroadc - samsung,sensorhub-rinato - sensiron,sgp30 - sentech,sx9500 - sharp,gp2ap020a00f - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180 - ti,adc084s021 ti,ads124s08 ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612 ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07 - upisemi,us51882 - vishay,vcnl4035 - x-powers,axp209 New device support * adi,ad5685 - Add support for AD5338R dual output 10-bit DAC - Add DT-binding doc. * mediatek,mt6360 - New driver for this SoC ADC with bindings and using new channel label support in the IIO core. * st,lsm6dsx - Add support for LSM6DST Core: * Add "label" to device channels, provided via a new core callback. Including DT docs for when that is the source, and ABI docs. * Add devm_iio_triggered_buffer_setup_ext to take extra attributes. * dmaengine, unwrap use of iio_buffer_set_attrs() * Drop iio_buffer_set_attrs() * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if no handler has run. * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect any known existing drivers, but will impact a future one. * kernel-doc fix in trigger.h * file-ops ordering cleanup Features * semtech,sx9310 - Add control of hardware gain, proximity thresholds, hysteresis and debounce. - Increase what information on hardware configuration can be provided via DT. Cleanup and minor features * adi,ad5685 - Add of_match_table * adi,ad7292 - Drop pointless spi_set_drvdata() call * adi,ad7298 - Drop platform data and tidy up external reference config. * adi,ad7303 - Drop platform data handling as unused. * adi,ad7768 - Add new label attribute for channels provided from dt. * adi,ad7887 - devm_ usage in probe simplifying remove and error handling. * adi,adis16201 - Drop pointless spi_set_drvdata() call * adi,adis16209 - Drop pointless spi_set_drvdata() call * adi,adis16240 - White space fixup * adi,adxl372 - use new devm_iio_triggered-buffer_setup_ext() * amlogic,meson-saradc - Drop pointless semicolon. * amstaos,tsl2563 - Put back i2c_device_id table as needed for greybus probing. * atmel,at91_adc - Use of_device_get_match_data() instead of open coding it. - Constify some driver data - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr() - Drop platform data as mostly dead code. - Tidy up reference voltage logic * atmel-sama5d2 - Drop a pointless semicolon - Merge buffer and trigger init into a separate function - Use new devm_iio_triggered_buff_setup_ext() * avago,apds9960 - Drop a pointless semicolon * bosch,bmc150 - Drop a pointless semicolon - Use new iio_triggered_buffer_setup_ext() * bosch,bmp280 - Drop a pointless semicolon * fsl,mma8452 - Constification * (google),cros_ec - Use new devm_iio_triggered_buffer_setup_ext() * hid-sensors - Use new iio_triggered_buffer_setup_ext() * ingenic,adc - Drop a pointless semicolon * invensense,icm426xx - Fix MAINTAINERS entry missing : * mediatek,mt6577_audxac - Add binding doc for mt8516 compatible with mt8173 * motorola,cpcap-adc - Fix an implicit fallthrough marking that clang needs to avoid warning. * samsung,exynos-adc - Stop relying on users counter form input device in ISR. * st,lsm6dsx - add vdd and vddio regulator control (including binding update) * st,stm32-adc - Tidy up code for dma transfers. - Adapt clock duty cycle for proper functioning. Note no known problems with existing boards. * st,vl53l0x-i2c - Put back i2c_device_id table as needed for greybus probing. * vishay,vcnl4035 - Put back i2c_device_id table as needed for greybus probing. * tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion. dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion. dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion. dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion dt-bindings:iio:light:st,vl6180: txt to yaml format conversion. dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion. dt-bindings:iio:light:ti,opt3001: txt to yaml conversion dt-bindings:iio:light:maxim,max44009: txt to yaml conversion. dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion. dt-bindings:iio:light:capella,cm36651: txt to yaml conversion. dt-bindings:iio:light:avago,apds9960: txt to yaml conversion dt-bindings:iio:light:avago,apds9300: txt to yaml conversion. dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion ...
2020-11-16dt-bindings:iio:humidity:dht11 yaml conversionJonathan Cameron2-14/+41
The conversion is straight forward, but leaves an open question. The compatible for this device has never had a vendor. Harald Geyer has identified as probably being made by aosong, but we have no current match to any of their more specific part numbers. As such, this is noted in the file but the compatible doesn't include the vendor prefix. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-By: Harald Geyer <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-16dt-bindings:iio:humidity:st,hts221 yaml conversion.Jonathan Cameron2-30/+52
Straight forward conversion of this temperature and pressure sensor binding. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-16dt-bindings:iio:humidity:htu21 Drop separate doc + add to trivial-devicesJonathan Cameron1-13/+0
Very simple binding for this i2c device with no properties beyond reg and compatible. Hence doesn't need it's own document. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-16dt-bindings:iio:humidity:hdc100x Drop separate doc + add to trivial-devicesJonathan Cameron1-17/+0
Very simple binding for this i2c device with no properties beyond reg and compatible. Hence doesn't need it's own document. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Matt Ranostay <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26dt-bindings: Another round of adding missing ↵Rob Herring1-0/+2
'additionalProperties/unevalutatedProperties' Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Signed-off-by: Rob Herring <[email protected]>
2020-09-03dt-bindings: iio: humidity: Add TI HDC20x0 supportEugene Zaikonnikov1-0/+45
Add device tree bindings for HDC2010/HDC2080 family of humidity and temperature sensors. Signed-off-by: Eugene Zaikonnikov <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2018-07-25dt-bindings: remove 'interrupt-parent' from bindingsRob Herring1-1/+0
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2017-07-25dt-bindings: iio: humidity: hts221: support open drain modeLorenzo Bianconi1-0/+8
Signed-off-by: Lorenzo Bianconi <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-07-22dt-bindings: iio: humidity: hts221: support active-low interruptsLorenzo Bianconi1-1/+2
Update hts221 device binding with active-low interrupts support (IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING). Acked-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-07-01dt-bindings: iio: humidity: Add bindings for HTU21 and MS8607 sensorsManivannan Sadhasivam1-0/+13
Add device tree bindings for Measurement-Specialties HTU21 temperature & humidity sensor and humidity part of MS8607 sensor Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-07-01dt-bindings: iio: humidity: add bindings for HDC100x sensorsMichael Stecklein1-0/+17
Add the bindings for the family of HDC100x sensors. Signed-off-by: Michael Stecklein <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2016-10-23Documentation: dt: iio: humidity: add hts221 sensor device bindingLorenzo Bianconi1-0/+22
Signed-off-by: Lorenzo Bianconi <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2013-12-03iio: Add new driver dht11Harald Geyer1-0/+14
This driver handles DHT11 and DHT22 sensors. Signed-off-by: Harald Geyer <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.