| Age | Commit message (Collapse) | Author | Files | Lines |
|
adi,ad5686.yaml and adi,ad5696.yaml duplicate all the I2C device
compatible strings with the exception of "adi,ad5337r". Since
adi,ad5686.yaml references spi-peripheral-props.yaml, drop the I2C
devices from it making it only SPI devices. Update the titles to make
the distinction clear.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add documentation for ltc2672.
Reviewed-by: Conor Dooley <[email protected]>
Co-developed-by: Michael Hennerich <[email protected]>
Signed-off-by: Michael Hennerich <[email protected]>
Signed-off-by: Kim Seer Paller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add documentation for ltc2664.
Reviewed-by: Conor Dooley <[email protected]>
Co-developed-by: Michael Hennerich <[email protected]>
Signed-off-by: Michael Hennerich <[email protected]>
Signed-off-by: Kim Seer Paller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Introduce a generalized DAC binding that can be used by DACs that have
similar properties adding output-range-microamp and output-range-microvolt.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Kim Seer Paller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
We need the char-misc and iio fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add support for ad3541r and ad3551r single output variants.
Signed-off-by: Angelo Dureghello <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The adi,gain-scaling-p/n values are an inverted log2,
so initial naming was set correctly, but the driver uses just
adi,gain-scaling-p/n, and if fdt is created accordingly with
the fdt bindings documentation, driver fails the probe.
Observing that:
- the Linux driver is the only consumer,
- there are no upstreamed dts nodes related to ad3552r,
the fix to the documentation side is preferred and less-risk.
Fixes: b0a96c5f599e ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
Signed-off-by: Angelo Dureghello <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Fix output range, as per datasheet must be -2.5 to 7.5.
Signed-off-by: Angelo Dureghello <[email protected]>
Fixes: b0a96c5f599e ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
This adds the bindings documentation for the 14 bit
RF Digital-to-Analog converter.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This adds the bindings documentation for the Analog Devices AXI DAC IP
core.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
The DAC081C081 is a TI DAC whose software interface is compatible with
the DAC5571. It is the 8-bit version of the DAC121C081, already
supported by the DAC5571 bindings. Extends the bindings to support this
chip.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Sean Nyekjaer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Adds support for MCP48xx series of DACs.
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf #MCP48x1
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf #MCP48x2
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Anshul Dalal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Added new property to support an external amplifier to be connected in a
gain of two configuration.
Signed-off-by: Michael Hennerich <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
schema does not enforce number of reset GPIOs, thus each device binding
must do it.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add documentation for MCP4728
Signed-off-by: Andrea Collamati <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/d93dd116cfa7f958c038c0c62993071ea48451d2.1691066050.git.andrea.collamati@gmail.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use 4-space indentation (for cases when it is neither 4 not 2 space).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Alexandru Lazar <[email protected]> # max1241
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use lowercase hex in addresses in examples.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Drop redundant blank lines and add such when needed.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Cleanup by removing unneeded quotes from refs and redundant blank lines.
No functional impact except adjusting to preferred coding style.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Dmitry Rokosov <[email protected]> # memsensing
Reviewed-by: Claudiu Beznea <[email protected]> # sama5d2-adc
Reviewed-by: Puranjay Mohan <[email protected]> # tmp117
Acked-by: Rob Herring <[email protected]>
Acked-by: Marcelo Schmitt <[email protected]> # ad7292
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add binding Doc for this SPI DAC.
The driver was perviously posted but was missing the DT binding document.
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Angelo Dureghello <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
AD5337 belongs to the same family as the AD5338.
The difference is that the AD5337 has 8-bit resolution instead of 10-bit.
Add a compatible entry for AD5337.
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Matti Vaittinen <[email protected]> # ROHM
Acked-by: Ulf Hansson <[email protected]> # MMC
Acked-by: Stephen Boyd <[email protected]> # clk
Acked-by: Dmitry Torokhov <[email protected]> # input
Acked-by: Mark Brown <[email protected]>
Acked-by: Hans Verkuil <[email protected]> # media
Acked-by: Sebastian Reichel <[email protected]> # power
Acked-by: Viresh Kumar <[email protected]> # cpufreq
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
'contains' applies to arrays, but 'adi,dc-dc-mode' is a scalar. So drop
'contains' from the 'if' schema.
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
As the maintainer email no longer exists, change it to myself.
Signed-off-by: Nuno Sá <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm
CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and
arm-firmware-suite bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM
memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027
RTC, and arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail"
* tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits)
dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml
dt-bindings: power: supply: drop quotes when not needed
dt-bindings: power: reset: drop quotes when not needed
dt-bindings: power: drop quotes when not needed
dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties
of/fdt: declared return type does not match actual return type
devicetree/bindings: correct possessive "its" typos
dt-bindings: net: convert emac_rockchip.txt to YAML
dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory
dt-bindings: eeprom: at25: use spi-peripheral-props.yaml
dt-bindings: display: use spi-peripheral-props.yaml
dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema
dt-bindings: power: reset: qcom,pon: use absolute path to other schema
dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat'
dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode'
of/fdt: Clean up early_init_dt_reserve_memory_arch()
dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
dt-bindings: rtc: Add EM Microelectronic EM3027 bindings
dt-bindings: rtc: ds1307: Convert to json-schema
...
|
|
'output-range-microvolts' is missing a type definition. '-microvolts' is
not a standard unit (should be '-microvolt'). As the property is already
in use, add a type reference.
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add device tree bindings for the MCP4921 DAC.
Signed-off-by: Kory Maincent <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Update bindings maintainerns section.
Signed-off-by: Alexandru Tachici <[email protected]>
Acked-by: Alexandru Ardelean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
It works much the same as ti,dac7571, so it fits in the "family" even
if the name is a little bit different.
Reviewed-by: Sean Nyekjaer <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of IIO new device support, features and cleanup for 5.19
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
* tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits)
iio: ti-ads8688: use of_device_id for OF matching
iio: stmpe-adc: use of_device_id for OF matching
dt-bindings: iio: Fix incorrect compatible strings in examples
iio: gyro: mpu3050: Make mpu3050_common_remove() return void
iio: dac: ltc2632: Make use of device properties
iio: temperature: max31865: Make use of device properties
iio: proximity: mb1232: Switch to use fwnode_irq_get()
iio: imu: adis16480: Improve getting the optional clocks
iio: imu: adis16480: Use temporary variable for struct device
iio: imu: adis16480: Make use of device properties
staging: iio: ad2s1210: remove redundant assignment to variable negative
iio: adc: sc27xx: add support for PMIC sc2730
iio: adc: sc27xx: add support for PMIC sc2720 and sc2721
iio: adc: sc27xx: refactor some functions for support more PMiCs
iio: adc: sc27xx: structure adjustment and optimization
iio: adc: sc27xx: Fine tune the scale calibration values
iio: adc: sc27xx: fix read big scale voltage not right
dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding
iio: proximity: stk3310: Export near level property for proximity sensor
dt-bindings: iio: light: stk33xx: Add proximity-near-level
...
|
|
Fix a couple of examples using incorrect compatible strings.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Slawomir Stepien <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
As the maintainer email no longer exists, change it to myself.
Signed-off-by: Nuno Sá <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Pick up new meta-schema warning fixes.
|
|
Remove trailing white-spaces and trailing blank lines (yamllint with
default options does not like them).
Suggested-by: Corentin Labbe <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
A recent review highlighted that the json-schema meta-schema allows any
combination of if/then/else schema keywords even though if, then or else
by themselves makes little sense. With an added meta-schema to only
allow valid combinations, there's a handful of schemas found which need
fixing in a variety of ways. Incorrect indentation is the most common
issue.
Cc: Lars-Peter Clausen <[email protected]>
Cc: Michael Hennerich <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Olivier Moysan <[email protected]>
Cc: Arnaud Pouliquen <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Georgi Djakov <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Fabrice Gasnier <[email protected]>
Cc: Grygorii Strashko <[email protected]>
Cc: Dmitry Osipenko <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Document the LTC2688 devicetree properties.
Signed-off-by: Nuno Sá <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add documentation for ad3552r and ad3542r
Signed-off-by: Mihail Chindris <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Probably a cut and paste error, but the binding header used in the
example is for the wrong device and nothing from it is used.
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Sean Nyekjaer <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
|
|
Add device tree bindings for the AD7293 Power Amplifier.
Signed-off-by: Antoniu Miclaus <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Not all @st.com email address are concerned, only people who have
a specific @foss.st.com email will see their entry updated.
For some people, who left the company, remove their email.
Cc: Alexandre Torgue <[email protected]>
Cc: Arnaud Pouliquen <[email protected]>
Cc: Fabien Dessenne <[email protected]>
Cc: Christophe Roullier <[email protected]>
Cc: Gabriel Fernandez <[email protected]>
Cc: Lionel Debieve <[email protected]>
Cc: Amelie Delaunay <[email protected]>
Cc: Pierre-Yves MORDRET <[email protected]>
Cc: Ludovic Barre <[email protected]>
Cc: Christophe Kerello <[email protected]>
Cc: pascal Paillet <[email protected]>
Cc: Erwan Le Ray <[email protected]>
Cc: Philippe CORNU <[email protected]>
Cc: Yannick Fertre <[email protected]>
Cc: Fabrice Gasnier <[email protected]>
Cc: Olivier Moysan <[email protected]>
Cc: Hugues Fruchet <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Lee Jones <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
A correct value for output-range-microvolts is -5 to 5 Volts
not -5 to 5 milivolts
Fixes: e904cc899293f ("dt-bindings: iio: dac: AD5766 yaml documentation")
Signed-off-by: Mihail Chindris <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Simple binding for this family of microchip DACs.
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Michael Welling <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Nuno Sá <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This device was missing a binding document. Simple binding with the
ad8803 requiring two both low and high references whilst the 8801
only has a high reference.
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Gwenhael Goavec-Merou <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Nuno Sá <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Documenting existing bindings for this device.
The Linux driver in theory 'works' without the two supplies that I have
listed as required, but without a valid scale. As such I've
documented it as required.
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Michael Hennerich <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Nuno Sá <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This binding covers the ad5744, ad5744r, ad5764 and ad5764r DACs.
Note that the driver currently assumes the internal reference is used for
the r parts. The binding as defined relaxes this constraint.
There is no support in the binding or driver for the two digital IO
signals. I do not propose to add that until we have a means to
test any such binding.
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Nuno Sá <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|