aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/accel
AgeCommit message (Collapse)AuthorFilesLines
2024-09-26Merge tag 'char-misc-6.12-rc1' of ↵Linus Torvalds2-0/+93
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystem changes for 6.12-rc1. Lots of changes in here, primarily dominated by the usual IIO driver updates and additions, but there are also small driver subsystem updates all over the place. Included in here are: - lots and lots of new IIO drivers and updates to existing ones - interconnect subsystem updates and new drivers - nvmem subsystem updates and new drivers - mhi driver updates - power supply subsystem updates - kobj_type const work for many different small subsystems - comedi driver fix - coresight subsystem and driver updates - fpga subsystem improvements - slimbus fixups - binder new feature addition for "frozen" notifications - lots and lots of other small driver updates and cleanups All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits) greybus: gb-beagleplay: Add firmware upload API arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7 dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios MAINTAINERS: Update path for U-Boot environment variables YAML nvmem: layouts: add U-Boot env layout comedi: ni_routing: tools: Check when the file could not be opened ocxl: Remove the unused declarations in headr file hpet: Fix the wrong format specifier uio: Constify struct kobj_type cxl: Constify struct kobj_type binder: modify the comment for binder_proc_unlock iio: adc: axp20x_adc: add support for AXP717 ADC dt-bindings: iio: adc: Add AXP717 compatible iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0 tools: iio: rm .*.cmd when make clean iio: adc: standardize on formatting for id match tables iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems ...
2024-09-13dt-bindings: Fix various typosYu-Chun Lin1-1/+1
Corrected several typos in Documentation/devicetree/bindings files. Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Kuan-Wei Chiu <[email protected]> Reviewed-by: Matti Vaittinen <[email protected]> Signed-off-by: Yu-Chun Lin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-08-03dt-bindings: iio: kionix,kxcjk1013: Document KX022-1020Rayyan Ansari1-0/+1
Document the KX022-1020 accelerometer, which has the same register layout as the KX023-1025 and so can use the same driver. Signed-off-by: Rayyan Ansari <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-08-03dt-bindings: iio: accel: add ADXL380Antoniu Miclaus1-0/+92
Add dt-bindings for ADXL380/ADLX382 low noise density, low power, 3-axis accelerometer with selectable measurement ranges. Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Ramona Gradinariu <[email protected]> Signed-off-by: Antoniu Miclaus <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-04-06dt-bindings: iio: accel: adxl345: Add spi-3wireLothar Rubusch1-0/+2
Add spi-3wire because the device allows to be configured for spi 3-wire communication. Signed-off-by: Lothar Rubusch <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-10-05dt-bindings: iio: Add KX132ACR-LBZ accelerometerMatti Vaittinen1-4/+6
ROHM KX132ACR-LBZ is an accelerometer for industrial applications. It has a subset of KX022A functionalities, dropping support for tap, free fall and tilt detection engines. Also, the register interface is an exact subset of what is found on KX022A. Extend the kionix,kx022a.yaml file to support the KX132ACR-LBZ device Signed-off-by: Matti Vaittinen <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/5c9e03ffad5e6e5970d6e71fb02eab4b652e109f.1695879676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2023-09-17dt-bindings: iio: Add KX132-1211 accelerometerMehdi Djait1-5/+7
Extend the kionix,kx022a.yaml file to support the kx132-1211 device Acked-by: Krzysztof Kozlowski <[email protected]> Acked-by: Matti Vaittinen <[email protected]> Signed-off-by: Mehdi Djait <[email protected]> Link: https://lore.kernel.org/r/735004c624082aead6e08ae37ea4fc086b11cf86.1694867379.git.mehdi.djait.k@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2023-08-24dt-bindings: Drop remaining unneeded quotesRob Herring1-2/+2
Cleanup bindings dropping the last remaining unneeded quotes. With this, the check for this can be enabled in yamllint. Acked-by: Miquel Raynal <[email protected]> # for mtd Acked-by: Sudeep Holla <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Wolfram Sang <[email protected]> # for AT24/I2C Acked-by: Guenter Roeck <[email protected]> Acked-by: Ulf Hansson <[email protected]> # For MMC Acked-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-01-28dt-bindings: iio: cleanup examples - indentationKrzysztof Kozlowski2-50/+50
Use 4-space indentation (for cases when it is neither 4 not 2 space). Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Alexandru Lazar <[email protected]> # max1241 Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-01-28dt-bindings: iio: use lowercase hex in examplesKrzysztof Kozlowski1-1/+1
Use lowercase hex in addresses in examples. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-01-28dt-bindings: iio: correct node names in examplesKrzysztof Kozlowski6-8/+8
Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in examples. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-01-28dt-bindings: iio: drop unneeded quotesKrzysztof Kozlowski1-3/+2
Cleanup by removing unneeded quotes from refs and redundant blank lines. No functional impact except adjusting to preferred coding style. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Rokosov <[email protected]> # memsensing Reviewed-by: Claudiu Beznea <[email protected]> # sama5d2-adc Reviewed-by: Puranjay Mohan <[email protected]> # tmp117 Acked-by: Rob Herring <[email protected]> Acked-by: Marcelo Schmitt <[email protected]> # ad7292 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-11-23dt-bindings: iio: accel: Add docs for ADXL359Ramona Bolboaca1-3/+5
Update ADXL355 existing documentation with documentation for ADXL359 device. Signed-off-by: Ramona Bolboaca <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-11-23dt-bindings: iio: Add KX022A accelerometerMatti Vaittinen1-0/+65
KX022A is a 3-axis Accelerometer from ROHM/Kionix. The sensor features include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ, tap/motion detection, wake-up & back-to-sleep events, four acceleration ranges (2, 4, 8 and 16g) and probably some other cool features. Add the basic device tree description for the accelerometer. Only basic accelerometer features are considered as of now - new properties may or may not be needed in the future when rest of the features are supported. Signed-off-by: Matti Vaittinen <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/06f8e1ab29d02ed216db10091a269df4b6abad9a.1666614295.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2022-09-21dt-bindings: iio: accel: adxl313: Add compatibles for adxl312 and adxl314George Mois1-3/+7
Extend the adi,adxl313.yaml file with information regrding the ADXL312 and ADXL314 devices. Signed-off-by: George Mois <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-08-30dt-bindings: iio: accel: add dt-binding schema for msa311 accel driverDmitry Rokosov1-0/+53
Introduce devicetree binding json-schema for MSA311 tri-axial, low-g accelerometer driver. Signed-off-by: Dmitry Rokosov <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-08-19dt-bindings: iio: accel: use spi-peripheral-props.yamlKrzysztof Kozlowski14-38/+56
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-08-12dt-bindings: iio: Drop Joachim EastwoodKrzysztof Kozlowski1-1/+0
Emails to Joachim Eastwood bounce ("552 5.2.2 The email account that you tried to reach is over quota and inactive."). Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-18dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C addressMarek Vasut1-1/+1
Align the example node address and reg content to be 0x2a for both. Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandru Ardelean <[email protected]> Cc: Hartmut Knaack <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Michael Hennerich <[email protected]> Cc: Peter Meerwald-Stadler <[email protected]> Cc: Rob Herring <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-06-14dt-bindings: iio: accel: sca3300: Document murata,scl3300LI Qingwu1-0/+1
Add DT bindings for Murata scl3300 inclinometer. Reviewed-by: Rob Herring <[email protected]> Signed-off-by: LI Qingwu <[email protected]> Reviewed-by: Tomas Melin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-06-11dt-bindings: iio: accel: Add bmi085 and bmi090l bindingsLI Qingwu1-0/+2
Adds the device-tree bindings for the Bosch BMI085 and BMI090L IMU, the accelerometer part. Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi085-ds001.pdf Datasheet: https://media.digikey.com/pdf/Data%20Sheets/Bosch/BST-BMI090L-DS000-00.pdf Signed-off-by: LI Qingwu <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-06-11dt-bindings: iio: accel: ADIS16240: update maintainersAlexandru Tachici1-1/+1
Update bindings maintainerns section. Signed-off-by: Alexandru Tachici <[email protected]> Acked-by: Alexandru Ardelean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2022-02-21dt-bindings: iio: accel: add ADXL367Cosmin Tanislav1-0/+79
The ADXL367 is an ultralow power, 3-axis MEMS accelerometer. The ADXL367 does not alias input signals to achieve ultralow power consumption, it samples the full bandwidth of the sensor at all data rates. Measurement ranges of +-2g, +-4g, and +-8g are available, with a resolution of 0.25mg/LSB on the +-2 g range. In addition to its ultralow power consumption, the ADXL367 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and an internal ADC for synchronous conversion of an additional analog input. Signed-off-by: Cosmin Tanislav <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-10-17dt-bindings: iio: kionix,kxcjk1013: driver support interruptsDavid Heidelberg1-0/+3
Device has interrupts support, which description was missing in the bindings. Signed-off-by: David Heidelberg <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-09-14dt-bindings: iio: accel: Add binding documentation for ADXL313Lucas Stankus1-0/+86
Add device tree binding documentation for ADXL313 3-axis accelerometer. Signed-off-by: Lucas Stankus <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/2eff22d1d22f7e72efdabdc681d02e922682c434.1630523106.git.lucas.p.stankus@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2021-09-14dt-bindings: iio: accel: Add DT binding doc for ADXL355Puranjay Mohan1-0/+88
Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer. Signed-off-by: Puranjay Mohan <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-08-08dt-bindings: iio: accel: bma255: Add bosch,bmc156_accelStephan Gerhold1-0/+18
BMC156 is very smilar to BMC150, but it has only one accelerometer interrupt pin. It would make sense if only INT1 was exposed but someone at Bosch decided to only have an INT2 pin. In this case, it does not make sense if the first interrupt pin is treated as INT1 (since that pin does not exist). Add a note to the bindings that the first interrupt pin is treated as INT2 for BMC156. Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-08-08dt-bindings: iio: accel: bma255: Add interrupt-namesStephan Gerhold1-3/+13
The binding already allows specifying both interrupt pins, but there is currently no way to describe a board where (for whatever reason) only INT2 is connected. Make it possible to use "interrupt-names" to make it explicit which interrupt pin is meant in the interrupts. Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-07-24dt-bindings: iio: accel: bma255: Merge bosch,bma180 schemaStephan Gerhold2-61/+9
In Linux the bma180 and bmc150-accel driver cover fairly similar chips from Bosch (just with minor register differences). For the DT schema, this does not make any difference: They both represent I2C/SPI devices, have one or two interrupts plus a vdd/vddio-supply. This means there is no need to duplicate the schema, we can just document the compatibles for both drivers in a single DT schema. Suggested-by: Jonathan Cameron <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-07-24dt-bindings: iio: accel: bma255: Sort compatiblesStephan Gerhold1-5/+5
Similar to recent rework in the bmc150-accel driver, sort the compatible list in the DT schema so there is a consistent order. Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-07-24dt-bindings: iio: accel: bma255: Fix interrupt typeStephan Gerhold1-2/+2
Bosch accelerometers similar to BMA255 are initially configured to emit an active-high interrupt signal. This is currently not re-configured in the bmc150-accel driver so the interrupt should most certainly be IRQ_TYPE_EDGE_RISING (or potentially IRQ_TYPE_LEVEL_HIGH). (Unless there is some kind of inverter installed on the board...) At the moment the bmc150-accel driver forcefully requests the IRQ using IRQF_TRIGGER_RISING, which means that the IRQ type is currently ignored in all existing device trees. Fixes: 6259551cf19b ("iio: accel: bmc150-accel: Add DT bindings") Cc: Linus Walleij <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-06-13dt-bindings: iio: accel: bma180/bma255: Move bma254 to bma255 schemaStephan Gerhold2-2/+2
BMA254 is very similar to BMA253/BMA255 which are both supported by the bmc150-accel driver. In general, there is quite some overlap between the bma180 and bmc150-accel driver, but the bmc150-accel driver has a few more features (e.g. motion trigger/interrupt). Let's move bma254 over to the bma255 schema (bmc150-accel driver). Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-06-13dt-bindings: iio: bma255: Allow multiple interruptsStephan Gerhold1-1/+6
BMA253 has two interrupt pins (INT1 and INT2) that can be configured independently. At the moment the bmc150-accel driver does not make use of them but it might be able to in the future, so it's useful to already specify all available interrupts in the device tree. Set maxItems: 2 for interrupts to allow specifying a second one. This is necessary as preparation to move the bosch,bma254 compatible from bosch,bma180.yaml to bosch,bma255.yaml since bma180 allows two interrupts, but BMA254 is better supported by the bmc150-accel driver. Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-06-13dt-bindings: iio: accel: bma255: Document bosch,bma253Stephan Gerhold1-0/+1
BMA253 is mostly like BMA255 that is already supported by the bmc150-accel driver. Document an extra bosch,bma253 compatible for it. Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-05-17dt-bindings: iio: kionix,kxcjk1013: Document kionix,kx023-1025Stephan Gerhold1-0/+1
The KX023-1025 accelerometer uses similar register bits as kxcjk1023, so it can make use of the same driver. Document the new kionix,kx023-1025 compatible that is also supported by the kxcjk-1013 driver now. Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2021-05-17dt-bindings: iio: accel: fxls8962af: add bindingsSean Nyekjaer1-0/+80
Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF accelerometer sensor. Signed-off-by: Sean Nyekjaer <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2021-05-17dt-bindings: iio: accel: Add SCA3300 documentationTomas Melin1-0/+44
initial DT bindings for Murata SCA3300 Accelerometer. Signed-off-by: Tomas Melin <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-05-17dt-bindings:iio:accel:fsl,mma7455 binding docJonathan Cameron1-0/+82
Binding documentation for this driver was missing. Note that the binding and some in tree dts files specifiy interrupts etc but the driver is fairly simple and does not yet make use of them. Listed both Joachim and myself as maintainers for this binding on basis it's Joachim's driver but I don't want to volunteer Joachim too strongly to look after this doc. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Joachim Eastwood <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-05-17dt-bindings:iio:accel:bosch,bma220 device tree binding documentationJonathan Cameron1-0/+50
Linux driver currently relies on the driver.name to match to the compatible, but that doesn't mean it isn't a good idea to document it. Only real complexity is the 3 separate power supplies. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-05-17dt-bindings:iio:accel:adis16201 and adis16209 bindingsJonathan Cameron1-0/+55
These two devices have different internal characteristics, but their external connectivity and as a result device tree descriptions are identical. Note that neither driver in Linux currently has an of_match_table but instead rely on matching via name alone. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-11dt-bindings: iio: accel: Add bmi088 accelerometer bindingsMike Looijmans1-0/+68
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, the accelerometer part. Signed-off-by: Mike Looijmans <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-01-25Merge 5.11-rc5 into staging-nextGreg Kroah-Hartman1-2/+2
We need the IIO/Staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-22dt-bindings: iio: accel: kxcjk1013: Document regulator suppliesDevajith V S1-0/+3
kxcjk1013 devices have VDD and VDDIO power lines. Need to make sure the regulators are enabled before any communication with kxcjk1013. Document support for vdd/vddio-supply to implement this. Signed-off-by: Devajith V S <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2021-01-14dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatibleStephan Gerhold1-2/+2
The bmc150-accel-i2c.c driver has an "_accel" suffix for the compatibles of BMC150 and BMI055. This is necessary because BMC150 contains both accelerometer (bosch,bmc150_accel) and magnetometer (bosch,bmc150_magn) and therefore "bosch,bmc150" would be ambiguous. However, the binding documentation suggests using "bosch,bmc150". Add the "_accel" suffix for BMC150 and BMI055 so the binding docs match what is expected by the driver. Fixes: 6259551cf19b ("iio: accel: bmc150-accel: Add DT bindings") Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2020-12-03iio: accel: bmc150-accel: Add DT bindingsLinus Walleij1-0/+73
These accelerometers have bindings used in the kernel and several device trees but no proper bindings documentation. Add it. Also add a compatible for the BMA222 that I am right now adding support for in the driver. Signed-off-by: Linus Walleij <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2020-11-25dt-bindings:iio:accel:fsl,mma8452: txt to yaml conversion.Jonathan Cameron2-35/+65
Simple binding so mostly straight forward to convert. Original binding was unclear on how many interrupts there are. The device has two such lines, whilst I believe the driver currently only uses one at a time. The binding should allow both to be specified. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Martin Kepplinger <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-25dt-bindings:iio:accel:kionix,kxcjk1013: txt to yaml format conversion.Jonathan Cameron2-24/+46
Very simple binding hence a straight forward conversion. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Dmitry Osipenko <[email protected]> Cc: Robert Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-25dt-bindings:iio:accel:bosch,bma180: txt to yaml format conversion.Jonathan Cameron2-35/+62
One question in here is whether we want to constrain the number of interrupts. Some parts definitely only have 1 such pin, and others 2 pins but I can not find information on the bma254. Oleksandr's email address is bouncing so I've listed myself as maintainer for this binding until someone else steps up. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-24Merge tag 'iio-for-5.11a' of ↵Greg Kroah-Hartman1-19/+0
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.11 cycle Usual mixed bag of new drivers / device support + cleanups etc with the addition of a fairly big set of yaml conversions. Txt to yaml format conversions. In some cases dropped separate binding and moved to trivial devices (drop). Listed by manufacturer - dht11 temperature(drop) - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303 adi,adis16480 adi,adf4350 - ams,as3935 - asahi-kasei,ak8974 - atmel,sama5d2-adc - avago,apds9300 avago,apds9960 - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180 - brcm,iproc-static-adc - capella,cm36651 - domintech,dmard06(drop) - fsl,mag3110 fsl,mma8452 fsl,vf610-dac - hoperf,hp03 - honeywell,hmc5843 - kionix,kxcjk1013 - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102 maxim,max31856 maxim,max31855k maxim,max44009 maxim,max5481 maxim,max5821 - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop) - mediatek,mt2701-auxadc - melexis,mlx90614 melexis,mlx90632 - memsic,mmc35240(drop) - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725 - murata,zap2326 - nxp,fxas21002c nxp,lpc1850-dac - pni,rm3100 - qcom,pm8018-adc qcom,spmi-iadc - renesas,isl29501 renesas,rcar-gyroadc - samsung,sensorhub-rinato - sensiron,sgp30 - sentech,sx9500 - sharp,gp2ap020a00f - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180 - ti,adc084s021 ti,ads124s08 ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612 ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07 - upisemi,us51882 - vishay,vcnl4035 - x-powers,axp209 New device support * adi,ad5685 - Add support for AD5338R dual output 10-bit DAC - Add DT-binding doc. * mediatek,mt6360 - New driver for this SoC ADC with bindings and using new channel label support in the IIO core. * st,lsm6dsx - Add support for LSM6DST Core: * Add "label" to device channels, provided via a new core callback. Including DT docs for when that is the source, and ABI docs. * Add devm_iio_triggered_buffer_setup_ext to take extra attributes. * dmaengine, unwrap use of iio_buffer_set_attrs() * Drop iio_buffer_set_attrs() * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if no handler has run. * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect any known existing drivers, but will impact a future one. * kernel-doc fix in trigger.h * file-ops ordering cleanup Features * semtech,sx9310 - Add control of hardware gain, proximity thresholds, hysteresis and debounce. - Increase what information on hardware configuration can be provided via DT. Cleanup and minor features * adi,ad5685 - Add of_match_table * adi,ad7292 - Drop pointless spi_set_drvdata() call * adi,ad7298 - Drop platform data and tidy up external reference config. * adi,ad7303 - Drop platform data handling as unused. * adi,ad7768 - Add new label attribute for channels provided from dt. * adi,ad7887 - devm_ usage in probe simplifying remove and error handling. * adi,adis16201 - Drop pointless spi_set_drvdata() call * adi,adis16209 - Drop pointless spi_set_drvdata() call * adi,adis16240 - White space fixup * adi,adxl372 - use new devm_iio_triggered-buffer_setup_ext() * amlogic,meson-saradc - Drop pointless semicolon. * amstaos,tsl2563 - Put back i2c_device_id table as needed for greybus probing. * atmel,at91_adc - Use of_device_get_match_data() instead of open coding it. - Constify some driver data - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr() - Drop platform data as mostly dead code. - Tidy up reference voltage logic * atmel-sama5d2 - Drop a pointless semicolon - Merge buffer and trigger init into a separate function - Use new devm_iio_triggered_buff_setup_ext() * avago,apds9960 - Drop a pointless semicolon * bosch,bmc150 - Drop a pointless semicolon - Use new iio_triggered_buffer_setup_ext() * bosch,bmp280 - Drop a pointless semicolon * fsl,mma8452 - Constification * (google),cros_ec - Use new devm_iio_triggered_buffer_setup_ext() * hid-sensors - Use new iio_triggered_buffer_setup_ext() * ingenic,adc - Drop a pointless semicolon * invensense,icm426xx - Fix MAINTAINERS entry missing : * mediatek,mt6577_audxac - Add binding doc for mt8516 compatible with mt8173 * motorola,cpcap-adc - Fix an implicit fallthrough marking that clang needs to avoid warning. * samsung,exynos-adc - Stop relying on users counter form input device in ISR. * st,lsm6dsx - add vdd and vddio regulator control (including binding update) * st,stm32-adc - Tidy up code for dma transfers. - Adapt clock duty cycle for proper functioning. Note no known problems with existing boards. * st,vl53l0x-i2c - Put back i2c_device_id table as needed for greybus probing. * vishay,vcnl4035 - Put back i2c_device_id table as needed for greybus probing. * tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion. dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion. dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion. dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion dt-bindings:iio:light:st,vl6180: txt to yaml format conversion. dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion. dt-bindings:iio:light:ti,opt3001: txt to yaml conversion dt-bindings:iio:light:maxim,max44009: txt to yaml conversion. dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion. dt-bindings:iio:light:capella,cm36651: txt to yaml conversion. dt-bindings:iio:light:avago,apds9960: txt to yaml conversion dt-bindings:iio:light:avago,apds9300: txt to yaml conversion. dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion ...
2020-11-16dt-bindings:iio:accel:domintech,dmard06: Move to trivial-devices.yamlJonathan Cameron1-19/+0
No need to maintain a separate document for such a simple binding. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.