| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add dt-bindings for adp1050 digital controller for isolated power supply
with pmbus interface voltage, current and temperature monitor.
Signed-off-by: Radu Sabau <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
tda38640 has a single regulator output along with CAT_FAULT# pin to
report internal events. Hence add properties for regulator & interrupt.
Signed-off-by: Naresh Solanki <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Reference common hwmon schema in the bindings which have and customize
the "shunt-resistor-micro-ohms" property. While this does not make the
binding smaller, it brings common definition of that property and also
allows generic "label" (parsed by Linux hwmon core code).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
All devices documented in the lm25066 binding are intended for use with
a regulator, be that for purely monitoring purposes (lm25056) or, for
the other devices, as the controller of that regulator. The binding does
not currently allow regulator child nodes, so add one.
Each of these devices interacts with only a single regulator and
documentation refers to it as "Vout", hence the choice of child node
name.
Acked-by: Zev Weiss <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240223-tingling-mutt-dd55dd87ff5e@spud
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Add the DT property 'infineon,en-pin-fixed-level' to
indicated that the chip EN pin is at fixed level
or left unconnected(has internal pull-down).
Signed-off-by: Patrick Rudolph <[email protected]>
Signed-off-by: Naresh Solanki <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[groeck: Dropped empty line at end]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Signed-off-by: Zev Weiss <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.
Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.
So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Acked-by: Alexandru Ardelean <[email protected]>
Reviewed-by: Benjamin Gaignard <[email protected]>
Acked-by: Stephen Boyd <[email protected]> # clock
Acked-by: Lee Jones <[email protected]>
|
|
Document the UCD90320 device tree binding.
Signed-off-by: Jim Wright <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|