aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2024-08-29dt-bindings: hwmon: Convert ltc2978.txt to yamlFrank Li2-62/+94
Convert binding doc ltc2978.txt to yaml format. Additional change: - add i2c node. Fix below warning: arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@2000000/i2c-mux@77/i2c@2/regulator@5c: failed to match any schema with compatible: ['lltc,ltc3882'] Signed-off-by: Frank Li <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Message-ID: <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2024-08-27dt-bindings: hwmon: Add Sophgo SG2042 external hardware monitor supportInochi Amaoto1-0/+43
Due to the design, Sophgo SG2042 use an external MCU to provide hardware information, thermal information and reset control. Add bindings for this monitor device. Signed-off-by: Inochi Amaoto <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Tested-by: Chen Wang <[email protected]> Reviewed-by: Chen Wang <[email protected]> Message-ID: <IA1PR20MB49538276F283C4D01364AEB6BB822@IA1PR20MB4953.namprd20.prod.outlook.com> Signed-off-by: Guenter Roeck <[email protected]>
2024-08-27dt-bindings: hwmon: Add maxim max31790Chanh Nguyen1-0/+70
Add device tree bindings and an example for max31790 device. Signed-off-by: Chanh Nguyen <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Message-ID: <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2024-07-31dt-bindings: hwmon: adt7475: Deprecate adi,pwm-active-stateChris Packham1-1/+1
Now that we have fan child nodes that can specify flags for the PWM outputs we no longer need the adi,pwm-active-state property. Signed-off-by: Chris Packham <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-07-31dt-bindings: hwmon: Add adt7475 fan/pwm propertiesChris Packham1-1/+34
Add fan child nodes that allow describing the connections for the ADT7475 to the fans it controls. This also allows setting some initial values for the pwm duty cycle and frequency. Signed-off-by: Chris Packham <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-06-18dt-bindings: hwmon: ti,tmp108: document V+ supply, add short descriptionStanislav Jakubek1-0/+12
TMP108 is powered by its V+ supply, document it. The property is called "vcc-supply" since the plus sign (+) is not an expected character. While at it, add a short description with a link to its datasheets. Signed-off-by: Stanislav Jakubek <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/ZnBmDXfnDQXNXz3k@standask-GA-A55M-S2HP Signed-off-by: Guenter Roeck <[email protected]>
2024-06-12dt-bindings: hwmon: ti,ina2xx: Add ti,alert-polarity-active-high propertyAmna Waseem1-0/+9
Add a property to the binding to configure the Alert Polarity. Alert pin is asserted based on the value of Alert Polarity bit of Mask/Enable register. It is by default 0 which means Alert pin is configured to be active low open collector. Value of 1 maps to Inverted (active high open collector). Signed-off-by: Amna Waseem <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-06-04dt-bindings: hwmon: g76x: Add support for g761Christian Marangi1-3/+26
Add support for g761 PWM Fan controller. This is an exact copy of g763 with the difference that it does also support an internal clock oscillator. With clocks property not defined, the internal clock oscillator is used. Signed-off-by: Christian Marangi <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-06-04dt-bindings: hwmon: g762: Convert to yaml schemaChristian Marangi2-47/+72
Convert g762 Documentation to yaml schema and port all the custom properties and info. Add the vendor prefix to name to follow naming standard. Signed-off-by: Christian Marangi <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-05-29dt-bindings: hwmon: Add max6639Naresh Solanki1-0/+92
Add Devicetree binding documentation for Maxim MAX6639 temperature monitor with PWM fan-speed controller. Signed-off-by: Naresh Solanki <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] [groeck: Dropped unnecessary '|' after description:] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: adm1275: add adm1281Jose Ramon San Buenaventura1-1/+3
Add support for the adm1281 Hot-Swap Controller and Digital Power and Energy Monitor Acked-by: Conor Dooley <[email protected]> Signed-off-by: Jose Ramon San Buenaventura <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: pmbus: adp1050: add bindingsRadu Sabau1-0/+49
Add dt-bindings for adp1050 digital controller for isolated power supply with pmbus interface voltage, current and temperature monitor. Signed-off-by: Radu Sabau <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: ibm,p8-occ-hwmon: move to trivial devicesJavier Carrasco1-25/+0
This binding meets the requirements to be converted to dtschema via trivial-devices.yaml. Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: stts751: convert to dtschemaJavier Carrasco2-15/+41
Convert existing binding to support validation. This is a straightforward conversion with no new properties. Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: pwm-fan: drop text fileJavier Carrasco1-1/+0
This binding was converted to dtschema a year ago. Acked-by: Rob Herring <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: ibmpowernv: convert to dtschemaJavier Carrasco2-23/+37
Convert existing binding to support validation. The binding has been renamed to match its compatible strings, with no further additions. Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: as370: convert to dtschemaJavier Carrasco2-11/+32
Convert existing binding to support validation. This is a straightforward conversion with now new properties. Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: max6650: convert to dtschemaJavier Carrasco2-28/+70
Convert existing bindings to dtschema to support validation. This is a straightforward conversion with no new properties. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: lm87: convert to dtschemaJavier Carrasco2-30/+69
Convert existing bindings to dtschema to support validation. This is a straightforward conversion with no new properties. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-04-28dt-bindings: hwmon: adc128d818: convert to dtschemaJavier Carrasco2-38/+63
Convert adc128d818 bindings to dtschema to support validation. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-03-07dt-bindings: hwmon: Support Aspeed g6 PWM TACH ControlBilly Tsai1-0/+71
Document the compatible for aspeed,ast2600-pwm-tach device, which can support up to 16 PWM outputs and 16 fan tach input. Signed-off-by: Billy Tsai <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-03-07dt-bindings: hwmon: fan: Add fan binding to schemaNaresh Solanki1-0/+79
Add common fan properties bindings to a schema. Bindings for fan controllers can reference the common schema for the fan child nodes: patternProperties: "^fan@[0-2]": type: object $ref: fan-common.yaml# unevaluatedProperties: false Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Naresh Solanki <[email protected]> Signed-off-by: Billy Tsai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-03-07dt-bindings: hwmon: tda38640: Add interrupt & regulator propertiesNaresh Solanki1-0/+28
tda38640 has a single regulator output along with CAT_FAULT# pin to report internal events. Hence add properties for regulator & interrupt. Signed-off-by: Naresh Solanki <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-03-01dt-bindings: hwmon: lm75: use common hwmon schemaThéo Lebrun1-1/+2
Reference common hwmon schema which has the generic "label" property, parsed by Linux hwmon subsystem. To: Jean Delvare <[email protected]> To: Guenter Roeck <[email protected]> Cc: [email protected] Signed-off-by: Théo Lebrun <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-25dt-bindings: hwmon: reference common hwmon schemaKrzysztof Kozlowski6-6/+24
Reference common hwmon schema in the bindings which have and customize the "shunt-resistor-micro-ohms" property. While this does not make the binding smaller, it brings common definition of that property and also allows generic "label" (parsed by Linux hwmon core code). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-25dt-bindings: hwmon: lltc,ltc4286: use common hwmon schemaKrzysztof Kozlowski1-5/+4
Reference common hwmon schema which allows to drop the "shunt-resistor-micro-ohms" property. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-25dt-bindings: hwmon: adi,adm1275: use common hwmon schemaKrzysztof Kozlowski1-5/+2
Reference common hwmon schema which allows to drop the "shunt-resistor-micro-ohms" property. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-25dt-bindings: hwmon: ti,ina2xx: use common hwmon schemaKrzysztof Kozlowski1-4/+4
Reference common hwmon schema which allows to drop the "label" property. Acked-by: Rob Herring <[email protected]> Acked-by: Guenter Roeck <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-25dt-bindings: hwmon: add common propertiesKrzysztof Kozlowski1-0/+19
Add a common hwmon schema for two properties: 1. "label", because Linux hwmon core code parses it. 2. "shunt-resistor-micro-ohms", because several devices already use it. Acked-by: Guenter Roeck <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-25dt-bindings: hwmon/pmbus: ti,lm25066: document regulatorsConor Dooley1-0/+12
All devices documented in the lm25066 binding are intended for use with a regulator, be that for purely monitoring purposes (lm25056) or, for the other devices, as the controller of that regulator. The binding does not currently allow regulator child nodes, so add one. Each of these devices interacts with only a single regulator and documentation refers to it as "Vout", hence the choice of child node name. Acked-by: Zev Weiss <[email protected]> Signed-off-by: Conor Dooley <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20240223-tingling-mutt-dd55dd87ff5e@spud Signed-off-by: Guenter Roeck <[email protected]>
2024-02-25dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799Guenter Roeck1-0/+1
While NCT6799 is mostly compatible to NCT6798, it needs a separate compatible entry because it is not completely compatible and does require chip specific code in the driver. Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Conor Dooley <[email protected]> Acked-by: Zev Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-25dt-bindings: hwmon: Add Amphenol ChipCap 2Javier Carrasco1-0/+77
Add device tree bindings and an example for the ChipCap 2 humidity and temperature sensor. Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Javier Carrasco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-11dt-bindings: hwmon: Add LTC4282 bindingsNuno Sa1-0/+159
Add bindings for the LTC4282 High Current Hot Swap Controller with I2C Compatible Monitoring. Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Nuno Sa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-02-11dt-bindings: hwmon: ina2xx: Describe ina260 chipMichal Simek1-0/+1
Describe ina260 chip which is precision digital current and power monitor with precision integrated shunt resistor. Signed-off-by: Michal Simek <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/4c82dc4d412e91d1601c1da5bca1cdf1a91cd9b8.1704724242.git.michal.simek@amd.com Signed-off-by: Guenter Roeck <[email protected]>
2024-02-11dt-bindings: hwmon: ina2xx: Describe #io-channel-cells propertyMichal Simek1-0/+4
There are two drivers in the Linux kernel. One is hwmon based and second IIO. IIO version requires to define #io-channel-cells to operate. Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/aa303b9fe3116e7f98d6b72822f7f57694366db3.1703077926.git.michal.simek@amd.com Signed-off-by: Guenter Roeck <[email protected]>
2024-02-11dt-bindings: hwmon: ina2xx: Add label propertyMichal Simek1-0/+4
Add a label property to allow a custom name to be used for identifying a device on the board. This is useful when multiple devices are present on the same board. Similar change was done by commit ffae65fb1ae4 ("dt-bindings: spi: spi-cadence: Add label property"). Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/6f3c57d08984c1978569d3918cb38eb295c0c67d.1703077926.git.michal.simek@amd.com Signed-off-by: Guenter Roeck <[email protected]>
2024-01-02dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensorAbdel Alkuor1-0/+33
as6200 is a temperature sensor with a range between -40°C to 125°C degrees and an accuracy of ±0.4°C degree between 0 and 65°C and ±1°C for the other ranges. Signed-off-by: Abdel Alkuor <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/17ba2dfdb3d25bf1b5b4ed9f858b6e28902bedbe.1703127334.git.alkuor@gmail.com Signed-off-by: Guenter Roeck <[email protected]>
2024-01-02dt-bindings: hwmon: gpio-fan: Convert txt bindings to yamlDavid Heidelberg2-41/+60
Convert fan devices connected to GPIOs to the YAML syntax. Signed-off-by: David Heidelberg <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-12-11dt-bindings: hwmon: Add lltc ltc4286 driver bindingsDelphine CC Chiu1-0/+50
Add a device tree bindings for ltc4286 device. Signed-off-by: Delphine CC Chiu <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] [groeck: Fixed path to ltc4286.rst] Signed-off-by: Guenter Roeck <[email protected]>
2023-12-11dt-bindings: hwmon: Increase max number of io-channelsMichal Simek1-1/+1
The Analog Monitoring System (AMS) defines 51 channels (Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml) that's why increase number to 51. Signed-off-by: Michal Simek <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/5110a313a5ce52ce6d7b5cb6b08368d42063dc30.1701419691.git.michal.simek@amd.com Signed-off-by: Guenter Roeck <[email protected]>
2023-10-29dt-bindings: hwmon: npcm: Add npcm845 compatible stringTomer Maimon1-1/+5
Add a compatible string for Nuvoton BMC NPCM845 Pulse Width Modulation (PWM) and Fan tach controller. Signed-off-by: Tomer Maimon <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-10-28dt-bindings: hwmon: ltc2991: add bindingsAntoniu Miclaus1-0/+128
Add dt-bindings for ltc2991 octal i2c voltage, current and temperature monitor. Signed-off-by: Antoniu Miclaus <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-10-28dt-bindings: hwmon: ti,ina2xx: add ti,ina237Richard Leitner1-0/+1
Add ti,ina237 binding to ti,ina2xx as they are very similar and may share the same properties. Signed-off-by: Richard Leitner <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-10-28dt-bindings: hwmon: ina3221: Add ti,summation-disableJon Hunter1-0/+19
The INA3221 has a critical alert pin that can be controlled by the summation control function. This function adds the single shunt-voltage conversions for the desired channels in order to compare the combined sum to the programmed limit. The Shunt-Voltage Sum Limit register contains the programmed value that is compared to the value in the Shunt-Voltage Sum register in order to determine if the total summed limit is exceeded. If the shunt-voltage sum limit value is exceeded, the critical alert pin pulls low. For the summation limit to have a meaningful value, it is necessary to use the same shunt-resistor value on all included channels. Add a new vendor specific property, 'ti,summation-disable', to allow specific channels to be excluded from the summation control function if the shunt resistor is different to other channels or the channel should not be considered for triggering the critical alert pin. Note that the ina3221 has always supported summing the various input channels and summation is enabled by default if the shunt-resistor values are the same. This change simply provides a way to exclude inputs from the summation. If this property is not populated, then the functionality of the driver does not change. Signed-off-by: Jon Hunter <[email protected]> Signed-off-by: Ninad Malwade <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-10-28dt-bindings: hwmon: ina3221: Convert to json-schemaNinad Malwade2-54/+102
Convert the TI INA3221 bindings from the free-form text format to json-schema. Note that the INA3221 input channels default to enabled in the chip. Unless channels are explicitly disabled in device-tree, input channels will be enabled. Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Ninad Malwade <[email protected]> Signed-off-by: Jon Hunter <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-10-28dt-bindings: hwmon: Add possible new properties to max31827 bindingsDaniel Matyas1-0/+66
These modify the corresponding bits in the configuration register. adi,comp-int is a hardware property, because it affects the behavior of the interrupt signal and whatever it is connected to. adi,timeout-enable is a hardware property, because it affects i2c bus operation. Signed-off-by: Daniel Matyas <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-10-27dt-bindings: hwmon: Add Infineon TDA38640Patrick Rudolph1-0/+49
Add the DT property 'infineon,en-pin-fixed-level' to indicated that the chip EN pin is at fixed level or left unconnected(has internal pull-down). Signed-off-by: Patrick Rudolph <[email protected]> Signed-off-by: Naresh Solanki <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] [groeck: Dropped empty line at end] Signed-off-by: Guenter Roeck <[email protected]>
2023-08-24dt-bindings: Drop remaining unneeded quotesRob Herring2-6/+6
Cleanup bindings dropping the last remaining unneeded quotes. With this, the check for this can be enabled in yamllint. Acked-by: Miquel Raynal <[email protected]> # for mtd Acked-by: Sudeep Holla <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Wolfram Sang <[email protected]> # for AT24/I2C Acked-by: Guenter Roeck <[email protected]> Acked-by: Ulf Hansson <[email protected]> # For MMC Acked-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-08-23dt-bindings: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski9-9/+9
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Guenter Roeck <[email protected]> Acked-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-08-21Merge branch 'dt/linus' into dt/nextRob Herring1-3/+3
Pick up changeset fixes for further rework.
Powered by cgit, Gruvboxed by Blaster4385.