aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-03arm64: dts: lg: Fix SP805 clocksAndre Przywara2-4/+4
The SP805 DT binding requires two clocks to be specified, but the two LG platform DTs currently only specify one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux (and U-Boot) SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Andre Przywara <[email protected]> Acked-by: Chanho Min <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03ARM: mstar: Fix up the fallout from moving the dts/dtsi filesDaniel Palmer7-7/+7
Since the dtsi/dts files have been moved some includes are now broken so this fixes up the includes so the dtbs build again. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Palmer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03ARM: mstar: Add mstar prefix to all of the dtsi/dts filesDaniel Palmer11-6/+4
Based on Arnd's comment[0] all of the MStar dtsi/dts files should have had a prefix. This moves the files, fixes the Makefile that generates dtbs and fixes up the MAINTAINERS entry. Fixing up some includes in the files themselves is left for a later commit as rolling it into this commit resulted in a confusing diff. 0 - https://lore.kernel.org/linux-arm-kernel/CAK8P3a0maQhfaerwG4KgFZOrUPwueKOp2+MOeG9C=+8ZNzc2Kg@mail.gmail.com/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Palmer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03ARM: mstar: Add interrupt to pm_uartDaniel Palmer1-0/+1
Since we now have support for the interrupt controller pm_uart's interrupt is routed through it make sense to wire up it's interrupt in the device tree. The interrupt is the same for all known chips so it goes in the base dtsi. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Palmer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03ARM: mstar: Add interrupt controller to base dtsiDaniel Palmer1-0/+19
Add the IRQ and FIQ intc instances to the base MStar/SigmaStar v7 dtsi. All of the known SoCs have both and at the same place with their common IPs using the same interrupt lines. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Palmer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'hisi-arm32-dt-for-5.10-tag2' of ↵Olof Johansson4-2/+100
git://github.com/hisilicon/linux-hisi into arm/dt ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10 (take two) - Fix the system controller compatible for the hi3620 and hip04 SoCs - Add the basic device tree for the hisilicon SD5203 SoC * tag 'hisi-arm32-dt-for-5.10-tag2' of git://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'omap-for-v5.10/dt-part2-signed' of ↵Olof Johansson57-297/+220
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt More dts changes for omaps for v5.10 merge window Some more dts changes that did not make it to the first set of dts changes: - Drop unnessary nokia,nvm-size property - A series of changes to use "okay" instead of "ok" - A series of changes to move boards to use new cpsw switch driver and drop the drop legacy cpsw dt node - A series of changes to fix issues with the GPIO binding usage * tag 'omap-for-v5.10/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am3874: iceboard: fix GPIO expander reset GPIOs ARM: dts: am335x: t335: align GPIO hog names with dtschema ARM: dts: am335x: lxm: fix PCA9539 GPIO expander properties ARM: dts: am437x-l4: drop legacy cpsw dt node ARM: dts: am437x: switch to new cpsw switch drv ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver ARM: dts: dra7: drop legacy cpsw dt node ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drv ARM: dts: dra7x-evm: switch to new cpsw switch drv ARM: dts: beagle-x15: switch to new cpsw switch drv ARM: dts: am57xx-idk: switch to new cpsw switch drv ARM: dts: am5729: beagleboneai: switch to new cpsw switch drv ARM: dts: am43xx: replace status value "ok" by "okay" ARM: dts: dra7xx: replace status value "ok" by "okay" ARM: dts: omap: replace status value "ok" by "okay" ARM: dts: n9, n950: Remove nokia,nvm-size property Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'zynqmp-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson4-20/+24
arm/dt arm64: soc: ZynqMP DT changes for v5.10 - Fix IRQ flag for PMIC - Align gpio hogs and leds with naming convention - Rename busses to match DT schema - Tune i2c cadence compatible string - Remove undocumented u-boot properties * tag 'zynqmp-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml arm64: dts: xilinx: align GPIO hog names with dtschema arm64: dts: zynqmp-zcu100-revC: correct interrupt flags arm64: dts: xilinx: Align IOMMU nodename with dtschema arm64: dts: zynqmp: Add GTR transceivers Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'sunxi-dt-for-5.10-2' of ↵Olof Johansson5-0/+361
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt A few more DT patches for 5.10, to support simple-framebuffer on the v3s and the pinecube board * tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: v3s: Add simple-framebuffer ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera dt-bindings: arm: sunxi: add Pine64 PineCube binding ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'v5.10-rockchip-dts32-1' of ↵Olof Johansson13-16/+76
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt cpu-supply fixes (supply for each cpu core not only cpu0) and a spelling for the status property. * tag 'v5.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: replace status value "ok" by "okay" ARM: dts: rockchip: update cpu supplies on rk3066a ARM: dts: rockchip: rk3066a: add label to cpu@1 ARM: dts: rockchip: update cpu supplies on rk3288 Link: https://lore.kernel.org/r/1834049.gShM3QRH0n@diego Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'actions-arm64-dt-for-v5.10' of ↵Olof Johansson1-1/+16
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi ARM64 DT for v5.10: - Fix the memory region used by pinctrl and sps drivers on the S700 SoC. The issue is fixed by limiting the address space used by pinctrl driver. In hardware these two are separate subsystems but the hw engineers somehow merged the registers space into one. So we now limit the address space with appropriate offsets for the two drivers. - Add DMA controller support for S700 SoC. The relevant driver changes are picked up by DMA Engine mainatainer. The DMA on this SoC can be used for mem-to-mem and mem-to-peripheral transfers. * tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: arm64: dts: actions: Add DMA Controller for S700 arm64: dts: actions: limit address range for pinctrl node Link: https://lore.kernel.org/r/20200922114030.GC11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'actions-arm-dt-for-v5.10' of ↵Olof Johansson5-3/+109
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi ARM DT for v5.10: - Add devicetree support for Caninos Loucos Labrador SBC manufactured by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: https://caninosloucos.org/en/ - Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU - Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: http://roseapplepi.org/ * tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: ARM: dts: owl-s500: Add RoseapplePi ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers ARM: dts: Add Caninos Loucos Labrador v2 Link: https://lore.kernel.org/r/20200922113712.GB11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'actions-bindings-for-v5.10' of ↵Olof Johansson2-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi bindings for v5.10 - Add vendor prefix for Roseapple Pi: http://roseapplepi.org/ - Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: http://roseapplepi.org/index.php/spec/ - Add vendor prefix for Caninos Loucos Program: https://caninosloucos.org/en/program-en/ - Document Caninos Loucos Labrador SBC manufactured by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: https://caninosloucos.org/en/labrador-32-en/ * tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: dt-bindings: arm: actions: Document RoseapplePi dt-bindings: Add vendor prefix for RoseapplePi.org dt-bindings: arm: actions: Document Caninos Loucos Labrador dt-bindings: Add vendor prefix for Caninos Loucos Link: https://lore.kernel.org/r/20200922113408.GA11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'sunxi-dt-for-5.10-1' of ↵Olof Johansson27-51/+770
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Allwinner A100 initial support - Mali, DMA, cedrus and IR Support for the R40 - Crypto support for the v3s - New board: Allwinner A100 Perf1 * tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (24 commits) ARM: dts: sun8i: v3s: Enable crypto engine dt-bindings: crypto: Add compatible for V3s dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset arm64: dts: allwinner: a64: Update the audio codec compatible arm64: dts: allwinner: a64: Update codec widget names ARM: dts: sun8i: a33: Update codec widget names ARM: dts: sun8i: r40: Add video engine node ARM: dts: sun8i: r40: Add node for system controller dt-bindings: sram: allwinner, sun4i-a10-system-control: Add R40 compatibles ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable IR ARM: dts: sun8i: r40: Add IR nodes dt-bindings: media: allwinner, sun4i-a10-ir: Add R40 compatible ARM: dts: sun8i: r40: Add DMA node dt-bindings: dma: allwinner,sun50i-a64-dma: Add R40 compatible arm64: allwinner: A100: add support for Allwinner Perf1 board dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings arm64: allwinner: A100: add the basical Allwinner A100 DTSI file dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi ARM: dts: sun4i: Enable HDMI support on the Mele A1000 ... Link: https://lore.kernel.org/r/ac39ee89-ea3a-4971-8cd7-8c4b2ecef39d.lettre@localhost Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'amlogic-dt-2' of ↵Olof Johansson1-2/+0
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.10 (round 2) - GPU: remove invalid interrupt lines * tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8: remove two invalid interrupt lines from the GPU node Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'ti-k3-dt-for-v5.10-part2' of ↵Olof Johansson13-96/+1323
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Second and final device tree updates towards 5.10-rc1 for TI K3 platform. * tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits) arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders arm64: dts: ti: k3-j7200: Add I2C nodes arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node arm64: dts: ti: k3-j7200-main: add main navss cpts node arm64: dts: ti: k3-j7200: add DMA support arm64: dts: ti: Add support for J7200 Common Processor Board arm64: dts: ti: Add support for J7200 SoC dt-bindings: arm: ti: Add bindings for J7200 SoC ... Link: https://lore.kernel.org/r/20201002134559.orvmgbns57qlyn3i@akan Signed-off-by: Olof Johansson <[email protected]>
2020-10-02ARM: dts: meson8: remove two invalid interrupt lines from the GPU nodeMartin Blumenstingl1-2/+0
The 3.10 vendor kernel defines the following GPU 20 interrupt lines: #define INT_MALI_GP AM_IRQ(160) #define INT_MALI_GP_MMU AM_IRQ(161) #define INT_MALI_PP AM_IRQ(162) #define INT_MALI_PMU AM_IRQ(163) #define INT_MALI_PP0 AM_IRQ(164) #define INT_MALI_PP0_MMU AM_IRQ(165) #define INT_MALI_PP1 AM_IRQ(166) #define INT_MALI_PP1_MMU AM_IRQ(167) #define INT_MALI_PP2 AM_IRQ(168) #define INT_MALI_PP2_MMU AM_IRQ(169) #define INT_MALI_PP3 AM_IRQ(170) #define INT_MALI_PP3_MMU AM_IRQ(171) #define INT_MALI_PP4 AM_IRQ(172) #define INT_MALI_PP4_MMU AM_IRQ(173) #define INT_MALI_PP5 AM_IRQ(174) #define INT_MALI_PP5_MMU AM_IRQ(175) #define INT_MALI_PP6 AM_IRQ(176) #define INT_MALI_PP6_MMU AM_IRQ(177) #define INT_MALI_PP7 AM_IRQ(178) #define INT_MALI_PP7_MMU AM_IRQ(179) However, the driver from the 3.10 vendor kernel does not use the following four interrupt lines: - INT_MALI_PP3 - INT_MALI_PP3_MMU - INT_MALI_PP7 - INT_MALI_PP7_MMU Drop the "pp3" and "ppmmu3" interrupt lines. This is also important because there is no matching entry in interrupt-names for it (meaning the "pp2" interrupt is actually assigned to the "pp3" interrupt line). Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU") Reported-by: Thomas Graichen <[email protected]> Signed-off-by: Martin Blumenstingl <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> Tested-by: thomas graichen <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-30arm64: dts: ti: k3-j7200-common-proc-board: Add USB supportRoger Quadros1-0/+22
The board uses lane 3 of SERDES for USB. Set the mux accordingly. The USB controller and EVM supports super-speed for USB0 on the Type-C port. However, the SERDES has a limitation that upto 2 protocols can be used at a time. The SERDES is wired for PCIe, QSGMII and USB super-speed. It has been chosen to use PCI2 and QSGMII as default. So restrict USB0 to high-speed mode. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Reviewed-by: Vignesh Raghavendra <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-30arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane functionKishon Vijay Abraham I1-0/+6
First two lanes of SERDES is connected to PCIe, third lane is connected to QSGMII and the last lane is connected to USB. However, Cadence torrent SERDES doesn't support more than 2 protocols at the same time. Configure it only for PCIe and QSGMII. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Reviewed-by: Vignesh Raghavendra <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-30arm64: dts: ti: k3-j7200-main: Add USB controllerRoger Quadros1-0/+30
j7200 has on USB controller instance. Add that. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Reviewed-by: Vignesh Raghavendra <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-30arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUXRoger Quadros1-0/+6
The USB controller can be connected to one of the 2 lanes of SERDES0 using a MUX. Add a MUX controller node for that. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Reviewed-by: Vignesh Raghavendra <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-30arm64: dts: ti: k3-j7200-main: Add SERDES lane control muxRoger Quadros1-0/+15
The SERDES lane control mux registers are present in the CTRLMMR space. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Reviewed-by: Vignesh Raghavendra <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-30dt-bindings: ti-serdes-mux: Add defines for J7200 SoCRoger Quadros1-0/+22
There are 4 lanes in each J7200 SERDES. Each SERDES lane mux can select upto 4 different IPs. Define all the possible functions. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Reviewed-by: Vignesh Raghavendra <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Peter Rosin <[email protected]> Cc: Peter Rosin <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-30Merge tag 'ti-k3-dt-fixes-for-v5.9' into ti-k3-dts-nextNishanth Menon4-64/+84
Merge fix up for TI serdes mux definition introduced in 5.9 as dependency for 5.10 series on J7200 USB. Signed-off-by: Nishanth Menon <[email protected]>
2020-09-30ARM: dts: hisilicon: add SD5203 dtsKefeng Wang2-0/+98
Add sd5203.dts for Hisilicon SD5203 SoC platform. Signed-off-by: Kefeng Wang <[email protected]> Signed-off-by: Zhen Lei <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-30ARM: dts: hisilicon: fix the system controller compatible nodesZhen Lei2-2/+2
The DT binding for Hisilicon system controllers require to have a "syscon" compatible string. Signed-off-by: Zhen Lei <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-29arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1Michal Simek1-4/+4
Fix the leds subnode names to match (^led-[0-9a-f]$|led). Similar change has been also done by commit 08dc0e5dd9aa ("arm64: dts: meson: fix leds subnodes name"). The patch is fixing this warning: avnet-ultra96-rev1.dt.yaml: leds: 'ds2', 'ds3', 'ds4', 'ds5' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/1a69c3fa0291f991ffcf113ea222c713ba4d4ff0.1598264917.git.michal.simek@xilinx.com
2020-09-29arm64: dts: zynqmp: Remove undocumented u-boot propertiesMichal Simek2-6/+0
u-boot, DT properties are not documented anywhere in Linux DT binding that's why remove them. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/8ba339425b9c9f319bdedce7741367055a30713c.1598257720.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <[email protected]>
2020-09-29arm64: dts: zynqmp: Remove additional compatible string for i2c IPsMichal Simek1-2/+2
DT binding permits only one compatible string which was decribed in past by commit 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC"). The commit aea37006e183 ("dt-bindings: i2c: cadence: Migrate i2c-cadence documentation to YAML") has converted binding to yaml and the following issues is reported: ...: i2c@ff030000: compatible: Additional items are not allowed ('cdns,i2c-r1p10' was unexpected) From schema: .../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds ...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too long The commit c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string") has added the second compatible string but without removing origin one. The patch is only keeping one compatible string "cdns,i2c-r1p14". Fixes: c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string") Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <[email protected]>
2020-09-29arm64: dts: zynqmp: Rename buses to be align with simple-bus yamlMichal Simek1-2/+2
Rename amba-apu and amba to AXI. Based on Xilinx ZynqMP TRM (Chapter 15) chip is "using the advanced eXtensible interface (AXI) point-to-point channels for communicating addresses, data, and response transactions between master and slave clients." Issues are reported as: ...: amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml ...: amba-apu@0: $nodename:0: 'amba-apu@0' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <[email protected]>
2020-09-29arm64: dts: xilinx: align GPIO hog names with dtschemaKrzysztof Kozlowski1-4/+4
The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2020-09-28ARM: dts: sun8i: v3s: Add simple-framebufferMartin Cerveny1-0/+16
Add support for "allwinner,simple-framebuffer" with "mixer0-lcd0" pipeline from boot loader (u-boot). It depends on boot loader implementation of DE2/TCON0 setup with LCD. Signed-off-by: Martin Cerveny <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP cameraIcenowy Zheng2-0/+236
The Pine64 PineCube IP camera is an IP camera with SoChip S3 SoC. It comes with a main board, an expansion board and a camera. The main board features a Micro-USB power-only jack, a USB Type-A port, an Ethernet port connected to the internal PHY of the SoC and a Realtek RTL8189ES SDIO Wi-Fi module. A RGB LCD connector is reserved on the board. The expansion board features a TF slot, a microphone, a speaker connector with on-board amplifier and a few IR LEDs. Add support for the kit, with features on the main board and the expansion board now. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28dt-bindings: arm: sunxi: add Pine64 PineCube bindingIcenowy Zheng1-0/+5
Document board compatible names for Pine64 PineCube IP camera. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bankIcenowy Zheng1-0/+6
I2C1 controller is available at PE bank, usually used for connecting an I2C-controlled camera sensor. Add pinctrl node for it. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSIIcenowy Zheng1-0/+14
The CSI1 controller of V3/V3s/S3/S3L SoCs is used for parallel CSI. As we're going to add support for Pine64 SCC board, which uses 8-bit parallel CSI (and the MCLK output), add the pinctrl node of 8-bit CSI and MCLK to the DTSI file. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device nodeIcenowy Zheng1-0/+12
The CSI1 controller of V3/V3s/S3/S3L chips is used for parallel CSI. Add the device tree node of it. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TXIcenowy Zheng1-0/+7
The UART2 RX/TX pins on Allwinner V3 series is at PB0/1, which is used as debugging UART on some boards. Add pinctrl node for them. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet supportIcenowy Zheng2-0/+65
The Allwinner V3/V3s/S3L/SoChip S3 Ethernet MAC and internal PHY is quite similar to the ones on Allwinner H3, except for V3s the external MII is not wired out. Add ethernet support to V3/V3s/S3/S3L. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-26Merge tag 'tegra-for-5.10-arm-dt' of ↵Olof Johansson2-11/+73
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Changes for v5.10-rc1 These changes extend support on the Nexus 7 and Acer A500 devices. * tag 'tegra-for-5.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: nexus7: Add SMB347 battery charger ARM: tegra: nexus7: Add touchscreen ARM: tegra: nexus7: Use PLLC for WiFi MMC clock parent ARM: tegra: acer-a500: Use PLLC for WiFi MMC clock parent ARM: tegra: acer-a500: Set WiFi MMC clock rate to 50 MHz ARM: tegra: acer-a500: Correct PINCTRL configuration ARM: tegra: acer-a500: Remove atmel,cfg_name property ARM: tegra: acer-a500: Add aliases for MMC ARM: tegra: nexus7: Add aliases for MMC dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx dt-bindings: tegra: pmc: Add Tegra234 support dt-bindings: fuse: tegra: Add Tegra234 support dt-bindings: tegra: Add Tegra234 VDK compatible dt-bindings: misc: tegra186-misc: Add Tegra234 support dt-bindings: misc: tegra186-misc: Add missing compatible string dt-bindings: misc: tegra-apbmisc: Add missing compatible strings Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'v5.9-next-dts32' of ↵Olof Johansson5-126/+478
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt2701: - add jpeg enconder node mt7623: - refactor dts and add hdmi support * tag 'v5.9-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: add missing pause for switchport arm: dts: mt7623: add lima related regulator arm: dts: mt7623: add display subsystem related device nodes arm: dts: mt7623: move display nodes to separate mt7623n.dtsi arm: dts: mt2701: Add jpeg enc device tree node Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'v5.9-next-dts64' of ↵Olof Johansson5-7/+60
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - make nor flash work - fix da9211 regulator modes mt8183: - add support for system companion processor mt8516: - set reset gpio for gpio expander in pumpkin board * tag 'v5.9-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8183: update watchdog device node arm64: dts: mt8173: elm: Fix nor_flash node property arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin arm64: dts: mt8183: add scp node arm64: dts: mt8173-elm: fix supported values for regulator-allowed-modes of da9211 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'amlogic-dt64' of ↵Olof Johansson9-793/+1071
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dtc: amlogic updates for v5.10 - new boards: libretch s905x cc v2, Hardkernel ODROID-N2+ - vim3: sound updates * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: initial support for aml-s905x-cc v2 dt-bindings: arm: amlogic: add support for libretch s905x cc v2 arm64: dts: meson: add support for the ODROID-N2+ dt-bindings: arm: amlogic: add support for the ODROID-N2+ arm64: dts: meson: convert ODROID-N2 to dtsi arm64: dts: meson: vim3l: remove sound card definition arm64: dts: meson: vim3: make sound card common to all variants arm64: dts: meson: vim3: correct led polarity Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'amlogic-dt' of ↵Olof Johansson1-7/+7
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.10 - minor cleanup * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: move the L2 cache-controller inside the SoC node Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'stm32-dt-for-v5.10-1' of ↵Olof Johansson17-71/+708
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.10, round 1 Highlights: ---------- MCU part: -Some changes on stm32h743: enable display controler, add SPI resets, use "st,stm32h7-uart" compatible. MPU part: -Add new Odyssey SOM board based on STM32MP157CAC. It embeds 4GB eMMC, 512 MB DDR3 RAM, USB and ETH connectors and a combo wifi/BT (AP6236 chip). -Add FMC2 EBI support on EV1 board. -Add arm-pmu node. -LXA: -Change ethernet phy delays to avoid kernel warnings. -Enable DDR50 eMMC mode. -DH: -Add new DH DRC02 unit board. -Add USB OTG support on PDK2 board. -Use uart8 RTS/CTS on PDK2 board. -Fix display PWM channel on PDK2 board. -Swap phy reset line and touchscreen irq on DHCOM SOM. -Drop QSPI CS2 on DHCOM SOM. -Update SDMMC pin config on AV96. -Enable uart7 RTS/CTS on AV96. * tag 'stm32-dt-for-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: add arm-pmu node on stm32mp15 ARM: dts: stm32: add FMC2 EBI support for stm32mp157c ARM: dts: stm32: lxa-mc1: enable DDR50 mode on eMMC ARM: dts: stm32: Fix DH PDK2 display PWM channel ARM: dts: stm32: Enable RTS/CTS for DH AV96 UART7 ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM ARM: dts: stm32: use stm32h7 usart compatible string for stm32h743 ARM: dts: stm32: add resets property to spi device nodes on stm32h743 ARM: dts: stm32: add display controller node to stm32h743 ARM: dts: stm32: Enable RTS/CTS for DH PDK2 UART8 ARM: dts: stm32: Drop QSPI CS2 pinmux on DHCOM ARM: dts: stm32: Add STM32MP1 UART8 RTS/CTS pinmux ARM: dts: stm32: add initial support for stm32mp157-odyssey board dt-bindings: arm: stm32: document Odyssey compatible dt-bindings: vendor-prefixes: add Seeed Studio ARM: dts: stm32: lxa-mc1: Fix kernel warning about PHY delays ARM: dts: stm32: Add USB OTG support to DH PDK2 ARM: dts: stm32: Fix sdmmc2 pins on AV96 ARM: dts: stm32: Add DHSOM based DRC02 board ARM: dts: stm32: Move ethernet PHY into DH SoM DT Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'qcom-arm64-for-5.10' of ↵Olof Johansson38-2097/+6415
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.10 Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device and platform specific parts to their respective files, add and use labels for reference nodes and use IRQ defines. Migrate TCSR mutex off the depricated binding, add resin node for PM8916. Add LPASS clock controller for SC7180. Fix the LLCC reg, increase interconnect-cells, drop flags on MDSS irqs. Add interconnects for display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal zones, improve pinconf states related to UART and Bluetooth. Add new DT for Lazor and Trogdor. Increase #interconnect-cells for SDM845 to allow tags, add OPP tables and power-domains for Venus and interconnects for display. Fix the ports on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1. Add interconnect providers, fix up primary USB's clock and use dt-binding defines for GPU clocks on SM8150. Add interconnect providers, CPUfreq, thermal configuration and missing uarts for SM8250. Fix up naming of debug uart, add always-on supply clock to gcc, fix up the sleep clock rate and define OPP tables for all QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board. Enable watchdog on IPQ8074 and use the appropriate compatible for the PMU node. Enable DVFS support for IPQ6018. Finally correct the spelling of "interrupts" in MSM8992 uart node, fix missing # in PM660 #interrupt-cells, add second VFE power-domain to camss in MSM8996 and sort the Makefile. * tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits) arm64: dts: qcom: sm8250: Add thermal zones and throttling support arm64: dts: qcom: sm8250: Add cpufreq hw node arm64: dts: qcom: sdm845: Add interconnects property for display arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider arm64: dts: qcom: sm8250: add interconnect nodes arm64: dts: qcom: sm8150: add interconnect nodes arm64: dts: qcom: sc7180: Increase the number of interconnect cells arm64: dts: qcom: sdm845: Increase the number of interconnect cells arm64: dts: qcom: Makefile: Sort lines arm64: dts: qcom: pm8916: Sort nodes arm64: dts: qcom: msm8916: Sort nodes arm64: dts: qcom: msm8916: Pad addresses arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x" arm64: dts: qcom: msm8916: Use more generic node names arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS arm64: dts: qcom: msm8916: Minor style fixes arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'v5.10-rockchip-dts64-1' of ↵Olof Johansson17-37/+937
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants. Khadas-edge additions and a some fixes. * tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S dt-bindings: Add doc for FriendlyARM NanoPi R2S arm64: dts: rockchip: replace status value "ok" by "okay" arm64: dts: rockchip: fix cpu-supply for rk3328-evb arm64: dts: rockchip: add rk3318 A95X Z2 board dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd. arm64: dts: rockchip: Add Radxa ROCK Pi 4C support arm64: dts: rockchip: Add Radxa ROCK Pi 4B support arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts dt-bindings: arm: rockchip: Update ROCKPi 4 binding arm64: dts: rockchip: change spdif fallback compatible on rk3308 arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'imx-dt64-5.10' of ↵Olof Johansson44-956/+4136
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree change for 5.10: - New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite VAR-SOM-MX8MN SoM and Symphony board. - Add NWL MIPI DSI controller support for i.MX8MQ. - Several series from Krzysztof Kozlowski to clean and fix up i.MX8 based device trees according to DT schema. - A series from Michael Walle to add sl28cpld support for Kontron sl28 device based on LS1028A. - Add two parameters for Samsung picophy tuning on imx8mm-evk and imx8mn-evk boards. - Add more thermal zones for Layerscape SoCs. - Various random update and minor fix-ups. * tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits) arm64: dts: imx8mq-librem5: correct GPIO hog property arm64: dts: imx8mm-var-som-symphony: Drop wake-up source from RTC arm64: dts: imx8mq: correct interrupt flags arm64: dts: imx8mn: correct interrupt flags arm64: dts: imx8mm: correct interrupt flags arm64: dts: imx8mm-var-som-symphony: fix ptn5150 interrupts arm64: dts: layerscape: correct watchdog clocks for LS1088A arm64: dts: freescale: sl28: enable fan support arm64: dts: freescale: sl28: enable LED support arm64: dts: freescale: sl28: map GPIOs to input events arm64: dts: freescale: sl28: enable sl28cpld arm64: dts: imx8mq-evk: Add MIPI DSI support arm64: dts: layerscape: Add label to pcie nodes arm64: dts: imx8mn-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MN arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module arm64: dts: imx8mn-ddr4-evk: Remove unneeded PMIC pin configuration arm64: dts: imx8mm-var-som-symphony: Adjust ethernet pin configuration arm64: dts: imx8mm-var-som-symphony: Remove unneeded i2c3 properties arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrp arm64: dts: imx8mq-librem5: Add interrupt-names to ti,tps6598x ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'imx-dt-5.10' of ↵Olof Johansson110-168/+1425
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm32 device tree change for 5.10: - New board/device support: Tolino Shine 2 HD, TQMa6 SoM, Y Soft IOTA Orion board. - update GPMI NAND node name to nand-controller for aligning with DT schema. - Remove the legacy fsl,spi-num-chipselects property from a few board. - A series to update imx6q-logicpd support, using GPIO chipselect, adding board compatible string, and enabling DTB build for the board. - Complete RNG device node in i.MX6SL device tree, and add RNG node for i.MX6SLL and i.MX6ULL. - Correct interrupt flags for imx6qdl-gw5xxx boards. - Add missing enet_out clock for i.MX6Q/DL Ethernet device. - Enable PCIe support for imx6qp-sabreauto board. - A series from Shengjiu Wang to add audio sound card for imx7d-sdb and imx6sll-evk board, add headphone detection for sound card on a few NXP development boards. - A couple of minor fix-ups on i.MX25 pin functions. - Some random update on various boards. * tag 'imx-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits) ARM: dts: imx6qdl-gw5xxx: correct interrupt flags ARM: dts: imx6q-logicpd: Use GPIO chipselect ARM: dts: imx: Add an entry for imx6q-logicpd.dtb ARM: dts: imx6q-logicpd: Add a specific board compatible string ARM: dts: imx6q: align GPIO hog names with dtschema ARM: dts: imx6qdl-tqma6: fix LM75 compatible string ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselects ARM: dts: imx6qdl-tqma6: fix indentation ARM: dts: imx28-m28: Align GPMI NAND node name with schema ARM: dts: imx6qdl: add enet_out clk support ARM: dts: imx6qdl: move iomuxc compatible assignment out of root node ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1 ARM: dts: imx: add devicetree for Tolino Shine 2 HD ARM: dts: imx6qdl-gw553x: Remove unneeded #address-cells/#size-cells ARM: dts: imx6sll-evk: Add audio sound card node ARM: dts: imx6sl-evk: Add headphone detection for sound card ARM: dts: imx6sx-sdb: Add headphone detection for sound card ARM: dts: imx6q-kontron-samx6i: Remove old fsl,spi-num-chipselects ARM: dts: imx: Fix the SPI chipselect polarity ARM: dts: imx25-pinfunc: Fix GPT function names ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-26Merge tag 'imx-bindings-5.10' of ↵Olof Johansson2-2/+97
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.10: - Various board compatible string additions to fsl.ymal. - Update Vybrid OCOTP binding for syscon compatible string, which is required to access the UID. * tag 'imx-bindings-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MN dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings dt-bindings: arm: fsl: Add an entry for the i.MX6 LogicPD board dt-bindings: arm: fsl: Fix matching Purism Librem5 phones dt-bindings: arm: fsl: Add imx8mm ddr4 evk board dt-bindings: arm: fsl: add compatible string for Tolino Shine 2 HD dt-bindings: nvmem: Add syscon to Vybrid OCOTP driver dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MM dt-bindings: arm: fsl: Add binding for Variscite VAR-SOM-MX8MM module dt-bindings: arm: fsl: Add ZII Ultra boards binding dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding dt-bindings: arm: fsl: Add Beacon i.MX8M Mini Development Kit binding dt-bindings: arm: fsl: Add the librem 5 phone dt-bindings: arm: fsl: Add Y Soft IOTA Orion board Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.