| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Close a socket with dump in progress. We need a dump which generates
enough info not to fit into a single skb. Policy dump fits the bill.
Use the trick discovered by syzbot for keeping a ref on the socket
longer than just close, with mqueue.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN global.test_sanity ...
# OK global.test_sanity
ok 1 global.test_sanity
# RUN global.close_in_progress ...
# OK global.close_in_progress
ok 2 global.close_in_progress
# RUN global.close_with_ref ...
# OK global.close_with_ref
ok 3 global.close_with_ref
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Note that this test is not expected to fail but rather crash
the kernel if we get the cleanup wrong.
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ncdevmem is a devmem TCP netcat. It works similarly to netcat, but it
sends and receives data using the devmem TCP APIs. It uses udmabuf as
the dmabuf provider. It is compatible with a regular netcat running on
a peer, or a ncdevmem running on a peer.
In addition to normal netcat support, ncdevmem has a validation mode,
where it sends a specific pattern and validates this pattern on the
receiver side to ensure data integrity.
Suggested-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Mina Almasry <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/[email protected]
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
bind_wildcard is compiled but not run, bind_timewait is not compiled.
These two tests complete in a very short time, use the test harness
properly, and seem reasonable to enable.
The author of the tests confirmed via email that these were
intended to be run.
Enable these two tests.
Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Fixes: 2c042e8e54ef ("tcp: Add selftest for bind() and TIME_WAIT.")
Signed-off-by: Jamie Bainbridge <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do
three things:
1. rename tcp_so_peek_off.c
2. adjust for UDP protocol
3. add selftests into it
Suggested-by: Jon Maloy <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: Jason Xing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We add a selftest to check that the new feature added in
commit 05ea491641d3 ("tcp: add support for SO_PEEK_OFF socket option")
works correctly.
Reviewed-by: Jason Xing <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Tested-by: Stefano Brivio <[email protected]>
Signed-off-by: Jon Maloy <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Nothing special, just test how long insertion of x policies takes.
This should ideally show linear insertion speeds.
Do not run this by default, it has little value, but it can be useful to
check for insertion speed chahnges when altering the xfrm policy db
implementation.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
Centralize the _GNU_SOURCE definition to CFLAGS in lib.mk. Remove
redundant defines from Makefiles that import lib.mk. Convert any usage of
"#define _GNU_SOURCE 1" to "#define _GNU_SOURCE".
This uses the form "-D_GNU_SOURCE=", which is equivalent to
"#define _GNU_SOURCE".
Otherwise using "-D_GNU_SOURCE" is equivalent to "-D_GNU_SOURCE=1" and
"#define _GNU_SOURCE 1", which is less commonly seen in source code and
would require many changes in selftests to avoid redefinition warnings.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Edward Liaw <[email protected]>
Suggested-by: John Hubbard <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jarkko Sakkinen <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kevin Tian <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Reinette Chatre <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
this selftest is designed for evaluating the SRv6 End.DX6 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv6 L3 VPN use cases.
Signed-off-by: Jianguo Wu <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
this selftest is designed for evaluating the SRv6 End.DX4 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv4 L3 VPN use cases.
Signed-off-by: Jianguo Wu <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Add a selftest which checks that the sysctl is present in a netns,
that the value is read from the init one, and that it's readonly.
Signed-off-by: Matteo Croce <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a simple test for the epoll busy poll ioctls, using the kernel
selftest harness.
This test ensures that the ioctls have the expected return codes and
that the kernel properly gets and sets epoll busy poll parameters.
The test can be expanded in the future to do real busy polling (provided
another machine to act as the client is available).
Signed-off-by: Joe Damato <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:
- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum
- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion
The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.
In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.
Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.
Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.
Tested:
make -C tools/testing/selftests/ \
TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft
cd /tmp/ksft
sudo NETIF=ens4 REMOTE_TYPE=ssh \
REMOTE_ARGS="[email protected]" \
LOCAL_V4="10.40.0.1" \
REMOTE_V4="10.40.0.2" \
./run_kselftest.sh -t drivers/net/hw:csum.py
Signed-off-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The BPF sample building code looks a little bit spaghetti-ish
so move it out to its own Makefile snippet. Similar in the spirit
to how we include lib.mk. libynl will soon get a similar snippet.
There is a small change hiding in the move, the relative
paths (../../.., ../.. etc) are replaced with variables
from lib.mk such as top_srcdir and selfdir.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The BPF sources moved with bpf_offload.py have a suffix of .bpf.c
which seems to be useful convention. Rename the 2 other BPF sources
we had. Use wildcard in the Makefile, since we can match all those
files easily now.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
selftest build is fairly noisy, it's easy to miss warnings.
It's standard practice to add alternative messages in
the Makefile. I was grepping for existing solutions,
and found that bpf already has the right knobs.
Move them to lib.mk and adopt in net.
Convert the basic rules in lib.mk.
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Non-ancient ip (iproute2-5.15.0, libbpf 0.7.0) refuses to load
the sample with maps because we don't generate BTF:
libbpf: BTF is required, but is missing or corrupted.
ERROR: opening BPF object file failed
Enable BTF by adding -g to clang flags. With that done
neither of the programs load:
libbpf: prog 'func': error relocating .BTF.ext function info: -22
libbpf: prog 'func': failed to relocate calls: -22
libbpf: failed to load object 'ksft-net-drv/net/sample_ret0.bpf.o'
Andrii explains that this is because we don't specify
section names for the code. Add the section names, too.
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We're building more python tests on the netdev side, and some
of the classes from the venerable BPF offload tests can be reused.
Acked-by: Stanislav Fomichev <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a trivial test using YNL.
$ ./tools/testing/selftests/net/nl_netdev.py
KTAP version 1
1..2
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
Instantiate the family once, it takes longer than the test itself.
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The tests in net/forwarding are generally expected to be HW-independent.
There are however several tests that, while not depending on any HW in
particular, nevertheless depend on being used on HW interfaces. Placing
these selftests to net/forwarding is confusing, because the selftest will
just report it can't be run on veth pairs. At the same time, placing them
to a particular driver's selftests subdirectory would be wrong.
Instead, add a new directory, drivers/net/hw, where these generic but HW
independent selftests should be placed. Move over several such tests
including one helper library.
Since typically these tests will not be expected to run, omit the directory
drivers/net/hw from the TARGETS list in selftests/Makefile. Retain a
Makefile in the new directory itself, so that a user can make -C into that
directory and act on those tests explicitly.
Cc: Roger Quadros <[email protected]>
Cc: Tobias Waldekranz <[email protected]>
Cc: Danielle Ratson <[email protected]>
Cc: Davide Caratti <[email protected]>
Cc: Johannes Nixdorf <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/e11dae1f62703059e9fc2240004288ac7cc15756.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The altnames test uses the forwarding/lib.sh and that dependency
currently causes failures when running the test after install:
make -C tools/testing/selftests/ TARGETS=net install
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:altnames.sh
# ...
# ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory
# RTNETLINK answers: Operation not permitted
# ./altnames.sh: line 73: tests_run: command not found
# ./altnames.sh: line 65: pre_cleanup: command not found
Address the issue leveraging the TEST_INCLUDES infrastructure
provided by commit 2a0683be5b4c ("selftests: Introduce Makefile variable
to list shared bash scripts")
Signed-off-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/f7b1e9d468224cbc136d304362315499fe39848f.1707298927.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Move those utility scripts to
TEST_FILES.
Fixes: 1751eb42ddb5 ("selftests: net: use TEST_PROGS_EXTENDED")
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Fixes: b99ac1841147 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile")
Fixes: f5173fe3e13b ("selftests: net: included needed helper in the install targets")
Suggested-by: Petr Machata <[email protected]>
Signed-off-by: Benjamin Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The blamed commit below introduce a dependency in some net self-tests
towards a newly introduce helper script.
Such script is currently not included into the TEST_PROGS_EXTENDED list
and thus is not installed, causing failure for the relevant tests when
executed from the install dir.
Fix the issue updating the install targets.
Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/076e8758e21ff2061cc9f81640e7858df775f0a9.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Several net tests requires an XDP program build under the ebpf
directory, and error out if such program is not available.
That makes running successful net test hard, let's duplicate into the
net dir the [very small] program, re-using the existing rules to build
it, and finally dropping the bogus dependency.
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
tools/testing/selftests/net/Makefile
2258b666482d ("selftests: add vlan hw filter tests")
a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add one basic vlan hw filter test.
Signed-off-by: Liu Jian <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a lib.sh for net selftests. This file can be used to define commonly
used variables and functions. Some commonly used functions can be moved
from forwarding/lib.sh to this lib file. e.g. busywait().
Add function setup_ns() for user to create unique namespaces with given
prefix name.
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Commit 29f834aa326e ("net_sched: sch_fq: add 3 bands and WRR
scheduling") introduces multiple traffic bands, and per-band maximum
packet count.
Per-band limits ensures that packets in one class cannot fill the
entire qdisc and so cause DoS to the traffic in the other classes.
Verify this behavior:
1. set the limit to 10 per band
2. send 20 pkts on band A: verify that 10 are queued, 10 dropped
3. send 20 pkts on band A: verify that 0 are queued, 20 dropped
4. send 20 pkts on band B: verify that 10 are queued, 10 dropped
Packets must remain queued for a period to trigger this behavior.
Use SO_TXTIME to store packets for 100 msec.
The test reuses existing upstream test infra. The script is a fork of
cmsg_time.sh. The scripts call cmsg_sender.
The test extends cmsg_sender with two arguments:
* '-P' SO_PRIORITY
There is a subtle difference between IPv4 and IPv6 stack behavior:
PF_INET/IP_TOS sets IP header bits and sk_priority
PF_INET6/IPV6_TCLASS sets IP header bits BUT NOT sk_priority
* '-n' num pkts
Send multiple packets in quick succession.
I first attempted a for loop in the script, but this is too slow in
virtualized environments, causing flakiness as the 100ms timeout is
reached and packets are dequeued.
Also do not wait for timestamps to be queued unless timestamps are
requested.
Signed-off-by: Willem de Bruijn <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull io_uring {get,set}sockopt support from Jens Axboe:
"This adds support for using getsockopt and setsockopt via io_uring.
The main use cases for this is to enable use of direct descriptors,
rather than first instantiating a normal file descriptor, doing the
option tweaking needed, then turning it into a direct descriptor. With
this support, we can avoid needing a regular file descriptor
completely.
The net and bpf bits have been signed off on their side"
* tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux:
selftests/bpf/sockopt: Add io_uring support
io_uring/cmd: Introduce SOCKET_URING_OP_SETSOCKOPT
io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT
io_uring/cmd: return -EOPNOTSUPP if net is disabled
selftests/net: Extract uring helpers to be reusable
tools headers: Grab copy of io_uring.h
io_uring/cmd: Pass compat mode in issue_flags
net/socket: Break down __sys_getsockopt
net/socket: Break down __sys_setsockopt
bpf: Add sockptr support for setsockopt
bpf: Add sockptr support for getsockopt
|
|
Instead of defining basic io_uring functions in the test case, move them
to a common directory, so, other tests can use them.
This simplify the test code and reuse the common liburing
infrastructure. This is basically a copy of what we have in
io_uring_zerocopy_tx with some minor improvements to make checkpatch
happy.
A follow-up test will use the same helpers in a BPF sockopt test.
Signed-off-by: Breno Leitao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
net/mac80211/key.c
02e0e426a2fb ("wifi: mac80211: fix error path key leak")
2a8b665e6bcc ("wifi: mac80211: remove key_mtx")
7d6904bf26b9 ("Merge wireless into wireless-next")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
drivers/net/ethernet/ti/Kconfig
a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object")
98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add selftest for fixes around naming netdevs and namespaces.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Test all the supported arguments for FDB flush. The test checks
configuration, not traffic. Note that the flag 'offloaded' is not checked
as it is not relevant when there is no hardware.
Signed-off-by: Amit Cohen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End.X behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs, according to the topology depicted in the selftest script file.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.
The NEXT-C-SID is provided as a "flavor" of the SRv6 End.X behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End.X behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Paolo Lungaroni <[email protected]>
Co-developed-by: Andrea Mayer <[email protected]>
Signed-off-by: Andrea Mayer <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add test cases for bridge backup port and backup nexthop ID, testing
both good and bad flows.
Example truncated output:
# ./test_bridge_backup_port.sh
[...]
Tests passed: 83
Tests failed: 0
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
fixes coccinelle WARNING: Use ARRAY_SIZE
Signed-off-by: Mahmoud Maatuq <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The -target option has been deprecated since clang 3.4 in 2013. Therefore, use
the preferred --target=bpf form instead. This also matches how we use --target=
in scripts/Makefile.clang.
Signed-off-by: Fangrui Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://github.com/llvm/llvm-project/commit/274b6f0c87a6a1798de0a68135afc7f95def6277
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add test to make sure that the localbypass option is on by default.
Add test to change vxlan localbypass to nolocalbypass and check
that packets are delivered to userspace.
Signed-off-by: Vladimir Nikishkin <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add test cases for bridge neighbor suppression, testing both per-port
and per-{Port, VLAN} neighbor suppression with both ARP and NS packets.
Example truncated output:
# ./test_bridge_neigh_suppress.sh
[...]
Tests passed: 148
Tests failed: 0
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add option to compute and send SHA256 over data sent (-i).
This is to ensure the correctness of data received.
Data is randomly populated from /dev/urandom.
Tested:
./tcp_mmap -s -z -i
./tcp_mmap -z -H $ADDR -i
SHA256 is correct
./tcp_mmap -s -i
./tcp_mmap -H $ADDR -i
SHA256 is correct
Signed-off-by: Coco Li <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
net/wireless/nl80211.c
b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy")
cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping")
https://lore.kernel.org/all/[email protected]
tools/testing/selftests/net/Makefile
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add test cases for VXLAN MDB, testing the control and data paths. Two
different sets of namespaces (i.e., ns{1,2}_v4 and ns{1,2}_v6) are used
in order to test VXLAN MDB with both IPv4 and IPv6 underlays,
respectively.
Example truncated output:
# ./test_vxlan_mdb.sh
[...]
Tests passed: 620
Tests failed: 0
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The test checks if (IPv4, IPv6) address pair properly conflict or not.
* IPv4
* 0.0.0.0
* 127.0.0.1
* IPv6
* ::
* ::1
If the IPv6 address is [::], the second bind() always fails.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This test runs on the client-router-server topo, and monitors the traffic
on the RX devices of router and server while sending BIG TCP packets with
netperf from client to server. Meanwhile, it changes 'tso' on the TX devs
and 'gro' on the RX devs. Then it checks if any BIG TCP packets appears
on the RX devs with 'ip/ip6tables -m length ! --length 0:65535' for each
case.
Note that we also add tc action ct in link1 ingress to cover the ipv6
jumbo packets process in nf_ct_skb_network_trim() of nf_conntrack_ovs.
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: Aaron Conole <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
This selftest is designed for testing the PSP flavor in SRv6 End behavior.
It instantiates a virtual network composed of several nodes: hosts and
SRv6 routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test makes use of the SRv6 End behavior and of the PSP flavor needed
for removing the SRH from the IPv6 header at the penultimate node.
The correct execution of the behavior is verified through reachability
tests carried out between hosts.
Signed-off-by: Andrea Mayer <[email protected]>
Signed-off-by: Paolo Lungaroni <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Ensure that RPS default mask changes take place on
all newly created netns/devices and don't affect
existing ones.
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Exercise IP_LOCAL_PORT_RANGE socket option in various scenarios:
1. pass invalid values to setsockopt
2. pass a range outside of the per-netns port range
3. configure a single-port range
4. exhaust a configured multi-port range
5. check interaction with late-bind (IP_BIND_ADDRESS_NO_PORT)
6. set then get the per-socket port range
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|