Age | Commit message (Collapse) | Author | Files | Lines |
|
Let's standardize the s390x KVM selftest output to the TAP output
generated via the kselftests.h interface.
Reviewed-by: Janosch Frank <[email protected]>
Signed-off-by: Thomas Huth <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
The tprot test currently does not have any output (unless one of
the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftests.h interface.
Reviewed-by: Janosch Frank <[email protected]>
Reviewed-by: Janis Schoetterl-Glausch <[email protected]>
Signed-off-by: Thomas Huth <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
The sync_regs test currently does not have any output (unless one
of the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftests.h interface.
To be able to distinguish the different sub-tests more easily, we
also break up the huge main() function here in more fine grained
parts.
Acked-by: Janosch Frank <[email protected]>
Signed-off-by: Thomas Huth <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
The memop test currently does not have any output (unless one of the
TEST_ASSERT statement fails), so it's hard to say for a user whether
a certain new sub-test has been included in the binary or not. Let's
make this a little bit more user-friendly and include some TAP output
via the kselftests.h interface.
Reviewed-by: Janosch Frank <[email protected]>
Signed-off-by: Thomas Huth <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
Fixing side effect of the so-called opportunistic change in the commit.
Fixes: dc8a9febbab0 ("KVM: selftests: x86: Fix test failure on arch lbr capable platforms")
Signed-off-by: Like Xu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix and feature for 5.19
- ultravisor communication device driver
- fix TEID on terminating storage key ops
|
|
KVM/riscv changes for 5.19
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
|
|
On Arch LBR capable platforms, LBR_FMT in perf capability msr is 0x3f,
so the last format test will fail. Use a true invalid format(0x30) for
the test if it's running on these platforms. Opportunistically change
the file name to reflect the tests actually carried out.
Suggested-by: Paolo Bonzini <[email protected]>
Signed-off-by: Yang Weijiang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Check that suppression is not indicated on injection of a key checked
protection exception caused by a memop after it already modified guest
memory, as that violates the definition of suppression.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Janosch Frank <[email protected]>
|
|
Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered. This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.
This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
select.
Signed-off-by: Aaron Lewis <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a helper function that creates a pmu event filter given an event
list. Currently, a pmu event filter can only be created with the same
hard coded event list. Add a way to create one given a different event
list.
Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.
No functional changes intended.
Signed-off-by: Aaron Lewis <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Fix the following coccicheck warnings:
./tools/testing/selftests/kvm/lib/riscv/processor.c:353:3-4: Unneeded
semicolon.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, we simply hang using "while (1) ;" upon any unexpected
guest traps because the default guest trap handler is guest_hang().
The above approach is not useful to anyone because KVM selftests
users will only see a hung application upon any unexpected guest
trap.
This patch improves unexpected guest trap handling for KVM RISC-V
selftests by doing the following:
1) Return to host user-space
2) Dump VCPU registers
3) Die using TEST_ASSERT(0, ...)
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Mayuresh Chitale <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
* kvm-arm64/psci-suspend:
: .
: Add support for PSCI SYSTEM_SUSPEND and allow userspace to
: filter the wake-up events.
:
: Patches courtesy of Oliver.
: .
Documentation: KVM: Fix title level for PSCI_SUSPEND
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2
Signed-off-by: Marc Zyngier <[email protected]>
|
|
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <[email protected]>
|
|
Assert that the vCPU exits to userspace with KVM_SYSTEM_EVENT_SUSPEND if
the guest calls PSCI SYSTEM_SUSPEND. Additionally, guarantee that the
SMC32 and SMC64 flavors of this call are discoverable with the
PSCI_FEATURES call.
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Split up the current test into several helpers that will be useful to
subsequent test cases added to the PSCI test suite.
Signed-off-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Setting a vCPU's MP state to KVM_MP_STATE_STOPPED has the effect of
powering off the vCPU. Rather than using the vCPU init feature flag, use
the KVM_SET_MP_STATE ioctl to power off the target vCPU.
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.
Signed-off-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There are other interactions with PSCI worth testing; rename the PSCI
test to make it more generic.
No functional change intended.
Signed-off-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the psuedo-firmware registers KVM_REG_ARM_STD_BMAP,
KVM_REG_ARM_STD_HYP_BMAP, and KVM_REG_ARM_VENDOR_HYP_BMAP to
the base_regs[] list.
Also, add the COPROC support for KVM_REG_ARM_FW_FEAT_BMAP.
Signed-off-by: Raghavendra Rao Ananta <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce a KVM selftest to check the hypercall interface
for arm64 platforms. The test validates the user-space'
[GET|SET]_ONE_REG interface to read/write the psuedo-firmware
registers as well as its effects on the guest upon certain
configurations.
Signed-off-by: Raghavendra Rao Ananta <[email protected]>
Reviewed-by: Gavin Shan <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.
Signed-off-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There are other interactions with PSCI worth testing; rename the PSCI
test to make it more generic.
No functional change intended.
Signed-off-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Clean up code that was hardcoding masks for various fields,
now that the masks are included in processor.h.
For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux.
PAGE_SIZE in particular was defined by several tests.
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Red Hat's QE team reported test failure on access_tracking_perf_test:
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0x3fffbffff000
Populating memory : 0.684014577s
Writing to populated memory : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
lib/kvm_util.c:1411: false
pid=125806 tid=125809 errno=4 - Interrupted system call
1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
2 (inlined by) addr_gpa2hva at kvm_util.c:1405
3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
6 0x00007fefe9ff81ce: ?? ??:0
7 0x00007fefe9c64d82: ?? ??:0
No vm physical memory at 0xffbffff000
I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.
It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated. In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.
The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield. Remove the bit fields and using manual masking
instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036
Reported-by: Nana Liu <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Tested-by: Peter Xu <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When compiling kvm_page_table_test.c, I get this compiler warning
with gcc 11.2:
kvm_page_table_test.c: In function 'pre_init_before_test':
../../../../tools/include/linux/kernel.h:44:24: warning: comparison of
distinct pointer types lacks a cast
44 | (void) (&_max1 == &_max2); \
| ^~
kvm_page_table_test.c:281:21: note: in expansion of macro 'max'
281 | alignment = max(0x100000, alignment);
| ^~~
Fix it by adjusting the type of the absolute value.
Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Claudio Imbrenda <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
+WARNING: Possible comma where semicolon could be used
+#397: FILE: tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c:700:
++ tmr.type = KVM_XEN_VCPU_ATTR_TYPE_TIMER,
++ vcpu_ioctl(vm, VCPU_ID, KVM_XEN_VCPU_GET_ATTR, &tmr);
Fixes: 25eaeebe710c ("KVM: x86/xen: Add self tests for KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
Signed-off-by: Like Xu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Merge branch for features that did not make it into 5.18:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The tsc_scaling_sync's binary should be present in the .gitignore
file for the git to ignore it.
Signed-off-by: Like Xu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The guest_hang() function is used as the default exception handler
for various KVM selftests applications by setting it's address in
the vstvec CSR. The vstvec CSR requires exception handler base address
to be at least 4-byte aligned so this patch fixes alignment of the
guest_hang() function.
Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Mayuresh Chitale <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Supporting hardware updates of PTE A and D bits is optional for any
RISC-V implementation so current software strategy is to always set
these bits in both G-stage (hypervisor) and VS-stage (guest kernel).
If PTE A and D bits are not set by software (hypervisor or guest)
then RISC-V implementations not supporting hardware updates of these
bits will cause traps even for perfectly valid PTEs.
Based on above explanation, the VS-stage page table created by various
KVM selftest applications is not correct because PTE A and D bits are
not set. This patch fixes VS-stage page table programming of PTE A and
D bits for KVM selftests.
Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Mayuresh Chitale <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
In order to correctly destroy a VM, all references to the VM must be
freed. The arch_timer selftest creates a VGIC for the guest, which
itself holds a reference to the VM.
Close the GIC FD when cleaning up a VM.
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
dirty_log_perf_test instantiates a VGICv3 for the guest (if supported by
hardware) to reduce the overhead of guest exits. However, the test does
not actually close the GIC fd when cleaning up the VM between test
iterations, meaning that the VM is never actually destroyed in the
kernel.
While this is generally a bad idea, the bug was detected from the kernel
spewing about duplicate debugfs entries as subsequent VMs happen to
reuse the same FD even though the debugfs directory is still present.
Abstract away the notion of setup/cleanup of the GIC FD from the test
by creating arch-specific helpers for test setup/cleanup. Close the GIC
FD on VM cleanup and do nothing for the other architectures.
Fixes: c340f7899af6 ("KVM: selftests: Add vgic initialization for dirty log perf test for ARM")
Reviewed-by: Jing Zhang <[email protected]>
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When testing a kernel with commit a5905d6af492 ("KVM: arm64:
Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
get-reg-list output
vregs: Number blessed registers: 234
vregs: Number registers: 238
vregs: There are 1 new registers.
Consider adding them to the blessed reg list with the following lines:
KVM_REG_ARM_FW_REG(3),
vregs: PASS
...
That output inspired two changes: 1) add the new register to the
blessed list and 2) explain why "Number registers" is actually four
larger than "Number blessed registers" (on the system used for
testing), even though only one register is being stated as new.
The reason is that some registers are host dependent and they get
filtered out when comparing with the blessed list. The system
used for the test apparently had three filtered registers.
Signed-off-by: Andrew Jones <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce a test for aarch64 that ensures non-mixed-width vCPUs
(all 64bit vCPUs or all 32bit vcPUs) can be configured, and
mixed-width vCPUs cannot be configured.
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Signed-off-by: David Woodhouse <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add test cases for timers in the past, and reading the status of a timer
which has already fired.
Signed-off-by: David Woodhouse <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Test a combination of event channel send, poll and timer operations.
Signed-off-by: David Woodhouse <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add support for SCHEDOP_poll hypercall.
This implementation is optimized for polling for a single channel, which
is what Linux does. Polling for multiple channels is not especially
efficient (and has not been tested).
PV spinlocks slow path uses this hypercall, and explicitly crash if it's
not supported.
[ dwmw2: Rework to use kvm_vcpu_halt(), not supported for 32-bit guests ]
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a test that asserts KVM rewrites guest hypercall instructions to
match the running architecture (VMCALL on VMX, VMMCALL on SVM).
Additionally, test that with the quirk disabled, KVM no longer rewrites
guest instructions and instead injects a #UD.
Signed-off-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several build and cleanup fixes:
- removing obsolete config options
- removing dependency on internal kernel macros
- adding config options
- several build fixes related to headers and install paths"
* tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (22 commits)
selftests: Fix build when $(O) points to a relative path
selftests: netfilter: fix a build error on openSUSE
selftests: kvm: add generated file to the .gitignore
selftests/exec: add generated files to .gitignore
selftests: add kselftest_install to .gitignore
selftests/rtc: continuously read RTC in a loop for 30s
selftests/lkdtm: Add UBSAN config
selftests/lkdtm: Remove dead config option
selftests/exec: Rename file binfmt_script to binfmt_script.py
selftests: Use -isystem instead of -I to include headers
selftests: vm: remove dependecy from internal kernel macros
selftests: vm: Add the uapi headers include variable
selftests: mptcp: Add the uapi headers include variable
selftests: net: Add the uapi headers include variable
selftests: landlock: Add the uapi headers include variable
selftests: kvm: Add the uapi headers include variable
selftests: futex: Add the uapi headers include variable
selftests: Correct the headers install path
selftests: Add and export a kernel uapi headers path
selftests: set the BUILD variable to absolute path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.18
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix, test and feature for 5.18 part 2
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
|
|
Test that errors occur if key protection disallows access, including
tests for storage and fetch protection override. Perform tests for both
logical vcpu and absolute vm ioctls.
Also extend the existing tests to the vm ioctl.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
Do not just test the actual copy, but also that success is indicated
when using the check only flag.
Add copy test with storage key checking enabled, including tests for
storage and fetch protection override.
These test cover both logical vcpu ioctls as well as absolute vm ioctls.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|
|
The stages synchronize guest and host execution.
This helps the reader and constraits the execution of the test -- if the
observed staging differs from the expected the test fails.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
|