aboutsummaryrefslogtreecommitdiff
path: root/tools/testing/selftests/kvm
AgeCommit message (Collapse)AuthorFilesLines
2022-06-11KVM: selftests: Split vcpu_set_nested_state() into two helpersSean Christopherson3-14/+16
Split vcpu_nested_state_set() into a wrapper that asserts, and an inner helper that does not. Passing a bool is all kinds of awful as it's unintuitive for readers and requires returning an 'int' from a function that for most users can never return anything other than "success". Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-11KVM: selftests: Drop @mode from common vm_create() helperSean Christopherson14-40/+42
Drop @mode from vm_create() and have it use VM_MODE_DEFAULT. Add and use an inner helper, __vm_create(), to service the handful of tests that want something other than VM_MODE_DEFAULT. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-11KVM: selftests: Make vcpu_ioctl() a wrapper to pretty print ioctl nameSean Christopherson2-25/+19
Make vcpu_ioctl() a macro wrapper and pretty the _name_ of the ioctl on failure instead of the number. Add inner macros to allow handling cases where the name of the ioctl needs to be resolved higher up the stack, and to allow using the formatting for non-ioctl syscalls without being technically wrong. Deliberately do not use __stringify(), as that will expand the ioctl all the way down to its numerical sequence, again the intent is to print the name of the macro. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-11KVM: selftests: Add another underscore to inner ioctl() helpersSean Christopherson13-39/+39
Add a second underscore to inner ioctl() helpers to better align with commonly accepted kernel coding style, and to allow using a single underscore variant in the future for macro shenanigans. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-11KVM: selftests: Always open VM file descriptors with O_RDWRSean Christopherson19-36/+34
Drop the @perm param from vm_create() and always open VM file descriptors with O_RDWR. There's no legitimate use case for other permissions, and if a selftest wants to do oddball negative testing it can open code the necessary bits instead of forcing a bunch of tests to provide useless information. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-11KVM: selftests: Drop stale declarations from kvm_util_base.hSean Christopherson1-5/+0
Drop declarations for allocate_kvm_dirty_log() and vm_create_device(), which no longer have implementations. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-11KVM: selftests: Fix typo in vgic_init testSean Christopherson1-2/+3
When iterating over vCPUs, invoke access_v3_redist_reg() on the "current" vCPU instead of vCPU0, which is presumably what was intended by iterating over all vCPUs. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-11KVM: selftests: Fix buggy-but-benign check in test_v3_new_redist_regions()Sean Christopherson1-2/+2
Update 'ret' with the return value of _kvm_device_access() prior to asserting that ret is non-zero. In the current code base, the flaw is benign as 'ret' is guaranteed to be -EBUSY from the previous run_vcpu(), which also means that errno==EBUSY prior to _kvm_device_access(), thus the "errno == EFAULT" part of the assert means that a false negative is impossible (unless the kernel is being truly mean and spuriously setting errno=EFAULT while returning success). Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-11KVM: Fix references to non-existent KVM_CAP_TRIPLE_FAULT_EVENTSean Christopherson1-3/+3
The x86-only KVM_CAP_TRIPLE_FAULT_EVENT was (appropriately) renamed to KVM_CAP_X86_TRIPLE_FAULT_EVENT when the patches were applied, but the docs and selftests got left behind. Fix them. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09Merge branch 'kvm-5.20-early'Paolo Bonzini17-64/+610
s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to show tests x86: * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Rewrite gfn-pfn cache refresh * Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit
2022-06-09KVM: selftests: Restrict test region to 48-bit physical addresses when using ↵David Matlack1-3/+15
nested The selftests nested code only supports 4-level paging at the moment. This means it cannot map nested guest physical addresses with more than 48 bits. Allow perf_test_util nested mode to work on hosts with more than 48 physical addresses by restricting the guest test region to 48-bits. While here, opportunistically fix an off-by-one error when dealing with vm_get_max_gfn(). perf_test_util.c was treating this as the maximum number of GFNs, rather than the maximum allowed GFN. This didn't result in any correctness issues, but it did end up shifting the test region down slightly when using huge pages. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2David Matlack8-8/+182
Add an option to dirty_log_perf_test that configures the vCPUs to run in L2 instead of L1. This makes it possible to benchmark the dirty logging performance of nested virtualization, which is particularly interesting because KVM must shadow L1's EPT/NPT tables. For now this support only works on x86_64 CPUs with VMX. Otherwise passing -n results in the test being skipped. Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Clean up LIBKVM files in MakefileDavid Matlack1-5/+31
Break up the long lines for LIBKVM and alphabetize each architecture. This makes reading the Makefile easier, and will make reading diffs to LIBKVM easier. No functional change intended. Reviewed-by: Peter Xu <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Link selftests directly with lib object filesDavid Matlack1-7/+4
The linker does obey strong/weak symbols when linking static libraries, it simply resolves an undefined symbol to the first-encountered symbol. This means that defining __weak arch-generic functions and then defining arch-specific strong functions to override them in libkvm will not always work. More specifically, if we have: lib/generic.c: void __weak foo(void) { pr_info("weak\n"); } void bar(void) { foo(); } lib/x86_64/arch.c: void foo(void) { pr_info("strong\n"); } And a selftest that calls bar(), it will print "weak". Now if you make generic.o explicitly depend on arch.o (e.g. add function to arch.c that is called directly from generic.c) it will print "strong". In other words, it seems that the linker is free to throw out arch.o when linking because generic.o does not explicitly depend on it, which causes the linker to lose the strong symbol. One solution is to link libkvm.a with --whole-archive so that the linker doesn't throw away object files it thinks are unnecessary. However that is a bit difficult to plumb since we are using the common selftests makefile rules. An easier solution is to drop libkvm.a just link selftests with all the .o files that were originally in libkvm.a. Reviewed-by: Peter Xu <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Drop unnecessary rule for STATIC_LIBSDavid Matlack1-1/+0
Drop the "all: $(STATIC_LIBS)" rule. The KVM selftests already depend on $(STATIC_LIBS), so there is no reason to have an extra "all" rule. Suggested-by: Peter Xu <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Add a helper to check EPT/VPID capabilitiesDavid Matlack1-1/+6
Create a small helper function to check if a given EPT/VPID capability is supported. This will be re-used in a follow-up commit to check for 1G page support. No functional change intended. Reviewed-by: Peter Xu <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.hDavid Matlack2-3/+2
This is a VMX-related macro so move it to vmx.h. While here, open code the mask like the rest of the VMX bitmask macros. No functional change intended. Reviewed-by: Peter Xu <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Refactor nested_map() to specify target levelDavid Matlack1-4/+12
Refactor nested_map() to specify that it explicityl wants 4K mappings (the existing behavior) and push the implementation down into __nested_map(), which can be used in subsequent commits to create huge page mappings. No function change intended. Reviewed-by: Peter Xu <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Drop stale function parameter comment for nested_map()David Matlack1-1/+0
nested_map() does not take a parameter named eptp_memslot. Drop the comment referring to it. Reviewed-by: Peter Xu <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Add option to create 2M and 1G EPT mappingsDavid Matlack1-50/+60
The current EPT mapping code in the selftests only supports mapping 4K pages. This commit extends that support with an option to map at 2M or 1G. This will be used in a future commit to create large page mappings to test eager page splitting. No functional change intended. Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09KVM: selftests: Replace x86_page_size with PG_LEVEL_XXDavid Matlack4-24/+29
x86_page_size is an enum used to communicate the desired page size with which to map a range of memory. Under the hood they just encode the desired level at which to map the page. This ends up being clunky in a few ways: - The name suggests it encodes the size of the page rather than the level. - In other places in x86_64/processor.c we just use a raw int to encode the level. Simplify this by adopting the kernel style of PG_LEVEL_XX enums and pass around raw ints when referring to the level. This makes the code easier to understand since these macros are very common in KVM MMU code. Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-09Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini1-4/+33
into HEAD KVM/riscv fixes for 5.19, take #1 - Typo fix in arch/riscv/kvm/vmid.c - Remove broken reference pattern from MAINTAINERS entry
2022-06-08KVM: selftests: Add a test to get/set triple fault eventChenyi Qiang3-0/+103
Add a selftest for triple fault event: - launch the L2 and exit to userspace via I/O. - using KVM_SET_VCPU_EVENTS to pend a triple fault event. - with the immediate_exit, check the triple fault is pending. - run for real with pending triple fault and L1 can see the triple fault. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Chenyi Qiang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-08selftests: kvm: replace ternary operator with min()Guo Zhengkui4-5/+5
Fix the following coccicheck warnings: tools/testing/selftests/kvm/lib/s390x/ucall.c:25:15-17: WARNING opportunity for min() tools/testing/selftests/kvm/lib/x86_64/ucall.c:27:15-17: WARNING opportunity for min() tools/testing/selftests/kvm/lib/riscv/ucall.c:56:15-17: WARNING opportunity for min() tools/testing/selftests/kvm/lib/aarch64/ucall.c:82:15-17: WARNING opportunity for min() tools/testing/selftests/kvm/lib/aarch64/ucall.c:55:20-21: WARNING opportunity for min() min() is defined in tools/include/linux/kernel.h. Signed-off-by: Guo Zhengkui <[email protected]> Acked-by: Claudio Imbrenda <[email protected]> Acked-by: Anup Patel <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-08kvm: selftests: Add KVM_CAP_MAX_VCPU_ID cap testZeng Guang3-0/+56
Basic test coverage of KVM_CAP_MAX_VCPU_ID cap. This capability can be enabled before vCPU creation and only allowed to set once. if assigned vcpu id is beyond KVM_CAP_MAX_VCPU_ID capability, vCPU creation will fail. Signed-off-by: Zeng Guang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-08KVM: selftests: nSVM: Add svm_nested_soft_inject_testMaciej S. Szmigiero7-7/+249
Add a KVM self-test that checks whether a nSVM L1 is able to successfully inject a software interrupt, a soft exception and a NMI into its L2 guest. In practice, this tests both the next_rip field consistency and L1-injected event with intervening L0 VMEXIT during its delivery: the first nested VMRUN (that's also trying to inject a software interrupt) will immediately trigger a L0 NPF. This L0 NPF will have zero in its CPU-returned next_rip field, which if incorrectly reused by KVM will trigger a #PF when trying to return to such address 0 from the interrupt handler. For NMI injection this tests whether the L1 NMI state isn't getting incorrectly mixed with the L2 NMI state if a L1 -> L2 NMI needs to be re-injected. Reviewed-by: Maxim Levitsky <[email protected]> [sean: check exact L2 RIP on first soft interrupt] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Maciej S. Szmigiero <[email protected]> Message-Id: <d5f3d56528558ad8e28a9f1e1e4187f5a1e6770a.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-07Merge tag 'kvm-s390-next-5.19-2' of ↵Paolo Bonzini4-52/+197
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: pvdump and selftest improvements - add an interface to provide a hypervisor dump for secure guests - improve selftests to show tests
2022-06-07Merge branch 'kvm-5.19-early-fixes' into HEADPaolo Bonzini1-3/+7
2022-06-07KVM: selftests: Make hyperv_clock selftest more stableVitaly Kuznetsov1-3/+7
hyperv_clock doesn't always give a stable test result, especially with AMD CPUs. The test compares Hyper-V MSR clocksource (acquired either with rdmsr() from within the guest or KVM_GET_MSRS from the host) against rdtsc(). To increase the accuracy, increase the measured delay (done with nop loop) by two orders of magnitude and take the mean rdtsc() value before and after rdmsr()/KVM_GET_MSRS. Reported-by: Maxim Levitsky <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Tested-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-06-01KVM: s390: selftests: Use TAP interface in the reset testThomas Huth1-8/+30
Let's standardize the s390x KVM selftest output to the TAP output generated via the kselftests.h interface. Reviewed-by: Janosch Frank <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]>
2022-06-01KVM: s390: selftests: Use TAP interface in the tprot testThomas Huth1-5/+24
The tprot test currently does not have any output (unless one of the TEST_ASSERT statement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via the kselftests.h interface. Reviewed-by: Janosch Frank <[email protected]> Reviewed-by: Janis Schoetterl-Glausch <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]>
2022-06-01KVM: s390: selftests: Use TAP interface in the sync_regs testThomas Huth1-21/+66
The sync_regs test currently does not have any output (unless one of the TEST_ASSERT statement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via the kselftests.h interface. To be able to distinguish the different sub-tests more easily, we also break up the huge main() function here in more fine grained parts. Acked-by: Janosch Frank <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]>
2022-06-01KVM: s390: selftests: Use TAP interface in the memop testThomas Huth1-18/+77
The memop test currently does not have any output (unless one of the TEST_ASSERT statement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via the kselftests.h interface. Reviewed-by: Janosch Frank <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]>
2022-05-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds17-174/+1346
Pull kvm updates from Paolo Bonzini: "S390: - ultravisor communication device driver - fix TEID on terminating storage key ops RISC-V: - Added Sv57x4 support for G-stage page table - Added range based local HFENCE functions - Added remote HFENCE functions based on VCPU requests - Added ISA extension registers in ONE_REG interface - Updated KVM RISC-V maintainers entry to cover selftests support ARM: - Add support for the ARMv8.6 WFxT extension - Guard pages for the EL2 stacks - Trap and emulate AArch32 ID registers to hide unsupported features - Ability to select and save/restore the set of hypercalls exposed to the guest - Support for PSCI-initiated suspend in collaboration with userspace - GICv3 register-based LPI invalidation support - Move host PMU event merging into the vcpu data structure - GICv3 ITS save/restore fixes - The usual set of small-scale cleanups and fixes x86: - New ioctls to get/set TSC frequency for a whole VM - Allow userspace to opt out of hypercall patching - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr AMD SEV improvements: - Add KVM_EXIT_SHUTDOWN metadata for SEV-ES - V_TSC_AUX support Nested virtualization improvements for AMD: - Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE, nested vGIF) - Allow AVIC to co-exist with a nested guest running - Fixes for LBR virtualizations when a nested guest is running, and nested LBR virtualization support - PAUSE filtering for nested hypervisors Guest support: - Decoupling of vcpu_is_preempted from PV spinlocks" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits) KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest KVM: selftests: x86: Sync the new name of the test case to .gitignore Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND x86, kvm: use correct GFP flags for preemption disabled KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer x86/kvm: Alloc dummy async #PF token outside of raw spinlock KVM: x86: avoid calling x86 emulator without a decoded instruction KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) s390/uv_uapi: depend on CONFIG_S390 KVM: selftests: x86: Fix test failure on arch lbr capable platforms KVM: LAPIC: Trace LAPIC timer expiration on every vmentry KVM: s390: selftest: Test suppression indication on key prot exception KVM: s390: Don't indicate suppression on dirtying, failing memop selftests: drivers/s390x: Add uvdevice tests drivers/s390/char: Add Ultravisor io device MAINTAINERS: Update KVM RISC-V entry to cover selftests support RISC-V: KVM: Introduce ISA extension register RISC-V: KVM: Cleanup stale TLB entries when host CPU changes RISC-V: KVM: Add remote HFENCE functions based on VCPU requests ...
2022-05-25KVM: selftests: x86: Sync the new name of the test case to .gitignoreLike Xu1-1/+1
Fixing side effect of the so-called opportunistic change in the commit. Fixes: dc8a9febbab0 ("KVM: selftests: x86: Fix test failure on arch lbr capable platforms") Signed-off-by: Like Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-25Merge tag 'kvm-s390-next-5.19-1' of ↵Paolo Bonzini1-1/+45
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix and feature for 5.19 - ultravisor communication device driver - fix TEID on terminating storage key ops
2022-05-25Merge tag 'kvm-riscv-5.19-1' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini3-18/+32
KVM/riscv changes for 5.19 - Added Sv57x4 support for G-stage page table - Added range based local HFENCE functions - Added remote HFENCE functions based on VCPU requests - Added ISA extension registers in ONE_REG interface - Updated KVM RISC-V maintainers entry to cover selftests support
2022-05-25Merge tag 'kvmarm-5.19' of ↵Paolo Bonzini18-261/+711
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 5.19 - Add support for the ARMv8.6 WFxT extension - Guard pages for the EL2 stacks - Trap and emulate AArch32 ID registers to hide unsupported features - Ability to select and save/restore the set of hypercalls exposed to the guest - Support for PSCI-initiated suspend in collaboration with userspace - GICv3 register-based LPI invalidation support - Move host PMU event merging into the vcpu data structure - GICv3 ITS save/restore fixes - The usual set of small-scale cleanups and fixes [Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated from 4 to 6. - Paolo]
2022-05-25KVM: selftests: x86: Fix test failure on arch lbr capable platformsYang Weijiang2-9/+11
On Arch LBR capable platforms, LBR_FMT in perf capability msr is 0x3f, so the last format test will fail. Use a true invalid format(0x30) for the test if it's running on these platforms. Opportunistically change the file name to reflect the tests actually carried out. Suggested-by: Paolo Bonzini <[email protected]> Signed-off-by: Yang Weijiang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20KVM: s390: selftest: Test suppression indication on key prot exceptionJanis Schoetterl-Glausch1-1/+45
Check that suppression is not indicated on injection of a key checked protection exception caused by a memop after it already modified guest memory, as that violates the definition of suppression. Signed-off-by: Janis Schoetterl-Glausch <[email protected]> Reviewed-by: Christian Borntraeger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Janosch Frank <[email protected]>
2022-05-20selftests: kvm/x86: Verify the pmu event filter matches the correct eventAaron Lewis1-0/+19
Add a test to demonstrate that when the guest programs an event select it is matched correctly in the pmu event filter and not inadvertently filtered. This could happen on AMD if the high nybble[1] in the event select gets truncated away only leaving the bottom byte[2] left for matching. This is a contrived example used for the convenience of demonstrating this issue, however, this can be applied to event selects 0x28A (OC Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up being denied when the event select was only set up to deny 0x28A. [1] bits 35:32 in the event select register and bits 11:8 in the event select. [2] bits 7:0 in the event select register and bits 7:0 in the event select. Signed-off-by: Aaron Lewis <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20selftests: kvm/x86: Add the helper function create_pmu_event_filterAaron Lewis1-4/+14
Add a helper function that creates a pmu event filter given an event list. Currently, a pmu event filter can only be created with the same hard coded event list. Add a way to create one given a different event list. Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify it's purpose given the introduction of create_pmu_event_filter. No functional changes intended. Signed-off-by: Aaron Lewis <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20KVM: selftests: riscv: Remove unneeded semicolonJiapeng Chong1-1/+1
Fix the following coccicheck warnings: ./tools/testing/selftests/kvm/lib/riscv/processor.c:353:3-4: Unneeded semicolon. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2022-05-20KVM: selftests: riscv: Improve unexpected guest trap handlingAnup Patel3-17/+31
Currently, we simply hang using "while (1) ;" upon any unexpected guest traps because the default guest trap handler is guest_hang(). The above approach is not useful to anyone because KVM selftests users will only see a hung application upon any unexpected guest trap. This patch improves unexpected guest trap handling for KVM RISC-V selftests by doing the following: 1) Return to host user-space 2) Dump VCPU registers 3) Die using TEST_ASSERT(0, ...) Signed-off-by: Anup Patel <[email protected]> Tested-by: Mayuresh Chitale <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2022-05-16Merge branch kvm-arm64/psci-suspend into kvmarm-master/nextMarc Zyngier1-31/+132
* kvm-arm64/psci-suspend: : . : Add support for PSCI SYSTEM_SUSPEND and allow userspace to : filter the wake-up events. : : Patches courtesy of Oliver. : . Documentation: KVM: Fix title level for PSCI_SUSPEND selftests: KVM: Test SYSTEM_SUSPEND PSCI call selftests: KVM: Refactor psci_test to make it amenable to new tests selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test KVM: arm64: Implement PSCI SYSTEM_SUSPEND KVM: arm64: Add support for userspace to suspend a vCPU KVM: arm64: Return a value from check_vcpu_requests() KVM: arm64: Rename the KVM_REQ_SLEEP handler KVM: arm64: Track vCPU power state using MP state values KVM: arm64: Dedupe vCPU power off helpers KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2 Signed-off-by: Marc Zyngier <[email protected]>
2022-05-16Merge branch kvm-arm64/hcall-selection into kvmarm-master/nextMarc Zyngier8-29/+406
* kvm-arm64/hcall-selection: : . : Introduce a new set of virtual sysregs for userspace to : select the hypercalls it wants to see exposed to the guest. : : Patches courtesy of Raghavendra and Oliver. : . KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace Documentation: Fix index.rst after psci.rst renaming selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list selftests: KVM: aarch64: Introduce hypercall ABI test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test tools: Import ARM SMCCC definitions Docs: KVM: Add doc for the bitmap firmware registers Docs: KVM: Rename psci.rst to hypercalls.rst KVM: arm64: Add vendor hypervisor firmware register KVM: arm64: Add standard hypervisor firmware register KVM: arm64: Setup a framework for hypercall bitmap firmware registers KVM: arm64: Factor out firmware register handling from psci.c Signed-off-by: Marc Zyngier <[email protected]>
2022-05-04selftests: KVM: Test SYSTEM_SUSPEND PSCI callOliver Upton1-0/+69
Assert that the vCPU exits to userspace with KVM_SYSTEM_EVENT_SUSPEND if the guest calls PSCI SYSTEM_SUSPEND. Additionally, guarantee that the SMC32 and SMC64 flavors of this call are discoverable with the PSCI_FEATURES call. Signed-off-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-04selftests: KVM: Refactor psci_test to make it amenable to new testsOliver Upton1-37/+60
Split up the current test into several helpers that will be useful to subsequent test cases added to the PSCI test suite. Signed-off-by: Oliver Upton <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-04selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_testOliver Upton1-2/+11
Setting a vCPU's MP state to KVM_MP_STATE_STOPPED has the effect of powering off the vCPU. Rather than using the vCPU init feature flag, use the KVM_SET_MP_STATE ioctl to power off the target vCPU. Signed-off-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-04selftests: KVM: Create helper for making SMCCC callsOliver Upton4-27/+58
The PSCI and PV stolen time tests both need to make SMCCC calls within the guest. Create a helper for making SMCCC calls and rework the existing tests to use the library function. Signed-off-by: Oliver Upton <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.