| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add some readonly memslot tests into page_fault_test. Mark the data and/or
page-table memory regions as readonly, perform some accesses, and check
that the right fault is triggered when expected (e.g., a store with no
write-back should lead to an mmio exit).
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some dirty logging tests into page_fault_test. Mark the data and/or
page-table memory regions for dirty logging, perform some accesses, and
check that the dirty log bits are set or clean when expected.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some userfaultfd tests into page_fault_test. Punch holes into the
data and/or page-table memslots, perform some accesses, and check that
the faults are taken (or not taken) when expected.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a new test for stage 2 faults when using different combinations of
guest accesses (e.g., write, S1PTW), backing source type (e.g., anon)
and types of faults (e.g., read on hugetlbfs with a hole). The next
commits will add different handling methods and more faults (e.g., uffd
and dirty logging). This first commit starts by adding two sanity checks
for all types of accesses: AF setting by the hw, and accessing memslots
with holes.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
allocations
Now that kvm_vm allows specifying different memslots for code, page tables,
and data, use the appropriate memslot when making allocations in
common/libraty code. Change them accordingly:
- code (allocated by lib/elf) use the CODE memslot
- stacks, exception tables, and other core data pages (like the TSS in x86)
use the DATA memslot
- page tables and the PGD use the PT memslot
- test data (anything allocated with vm_vaddr_alloc()) uses the TEST_DATA
memslot
No functional change intended. All allocators keep using memslot #0.
Cc: Sean Christopherson <[email protected]>
Cc: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Refactor virt_arch_pgd_alloc() and vm_vaddr_alloc() in both RISC-V and
aarch64 to fix the alignment of parameters in a couple of calls. This will
make it easier to fix the alignment in a future commit that adds an extra
parameter (that happens to be very long).
No functional change intended.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The vm_create() helpers are hardcoded to place most page types (code,
page-tables, stacks, etc) in the same memslot #0, and always backed with
anonymous 4K. There are a couple of issues with that. First, tests
willing to differ a bit, like placing page-tables in a different backing
source type must replicate much of what's already done by the vm_create()
functions. Second, the hardcoded assumption of memslot #0 holding most
things is spread everywhere; this makes it very hard to change.
Fix the above issues by having selftests specify how they want memory to be
laid out. Start by changing ____vm_create() to not create memslot #0; a
test (to come) will specify all memslots used by the VM. Then, add the
vm->memslots[] array to specify the right memslot for different memory
allocators, e.g.,: lib/elf should use the vm->[MEM_REGION_CODE] memslot.
This will be used as a way to specify the page-tables memslots (to be
backed by huge pages for example).
There is no functional change intended. The current commit lays out memory
exactly as before. A future commit will change the allocators to get the
region they should be using, e.g.,: like the page table allocators using
the pt memslot.
Cc: Sean Christopherson <[email protected]>
Cc: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the backing_src_type into struct userspace_mem_region. This struct
already stores a lot of info about memory regions, except the backing
source type. This info will be used by a future commit in order to
determine the method for punching a hole.
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Define macros for memory type indexes and construct DEFAULT_MAIR_EL1
with macros from asm/sysreg.h. The index macros can then be used when
constructing PTEs (instead of using raw numbers).
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Deleting a memslot (when freeing a VM) is not closing the backing fd,
nor it's unmapping the alias mapping. Fix by adding the missing close
and munmap.
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a library function to get the PTE (a host virtual address) of a
given GVA. This will be used in a future commit by a test to clear and
check the access flag of a particular page.
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Move the generic userfaultfd code out of demand_paging_test.c into a
common library, userfaultfd_util. This library consists of a setup and a
stop function. The setup function starts a thread for handling page
faults using the handler callback function. This setup returns a
uffd_desc object which is then used in the stop function (to wait and
destroy the threads).
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, the debug-exceptions test always uses only
{break,watch}point#0 and the highest numbered context-aware
breakpoint. Modify the test to use all {break,watch}points and
context-aware breakpoints supported on the system.
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, the debug-exceptions test doesn't have a test case for
a linked watchpoint. Add a test case for the linked watchpoint to
the test. The new test case uses the highest numbered context-aware
breakpoint (for Context ID match), and the watchpoint#0, which is
linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, the debug-exceptions test doesn't have a test case for
a linked breakpoint. Add a test case for the linked breakpoint to
the test. The new test case uses a pair of breakpoints. One is the
higiest numbered context-aware breakpoint (for Context ID match),
and the other one is the breakpoint#0 (for Address Match), which
is linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Change debug_version() to take the ID_AA64DFR0_EL1 value instead of
vcpu as an argument, and change its callsite to read ID_AA64DFR0_EL1
(and pass it to debug_version()).
Subsequent patches will reuse the register value in the callsite.
No functional change intended.
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, debug-exceptions test unnecessarily tracks some test stages
using GUEST_SYNC(). The code for it needs to be updated as test cases
are added or removed. Stop doing the unnecessary stage tracking,
as they are not so useful and are a bit pain to maintain.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add helpers to enable breakpoint and watchpoint exceptions.
No functional change intended.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Ricardo Koller <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Remove the hard-coded {break,watch}point #0 from the guest_code() in
debug-exceptions to allow {break,watch}point number to be specified.
Change reset_debug_state() to zeroing all dbg{b,w}{c,v}r_el0 registers
so that guest_code() can use the function to reset those registers
even when non-zero {break,watch}points are specified for guest_code().
Subsequent patches will add test cases for non-zero {break,watch}points.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Ricardo Koller <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce helpers in the debug-exceptions test to write to
dbg{b,w}{c,v}r registers. Those helpers will be useful for
test cases that will be added to the test in subsequent patches.
No functional change intended.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Use FIELD_GET() macro to extract ID register fields for existing
aarch64 selftests code. No functional change intended.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The memory area in each slot should be aligned to host page size.
Otherwise, the test will fail. For example, the following command
fails with the following messages with 64KB-page-size-host and
4KB-pae-size-guest. It's not user friendly to abort the test.
Lets do something to report the optimal memory slots, instead of
failing the test.
# ./memslot_perf_test -v -s 1000
Number of memory slots: 999
Testing map performance with 1 runs, 5 seconds each
Adding slots 1..999, each slot with 8 pages + 216 extra pages last
==== Test Assertion Failure ====
lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages
pid=19872 tid=19872 errno=0 - Success
1 0x00000000004065b3: vm_userspace_mem_region_add at kvm_util.c:822
2 0x0000000000401d6b: prepare_vm at memslot_perf_test.c:273
3 (inlined by) test_execute at memslot_perf_test.c:756
4 (inlined by) test_loop at memslot_perf_test.c:994
5 (inlined by) main at memslot_perf_test.c:1073
6 0x0000ffff7ebb4383: ?? ??:0
7 0x00000000004021ff: _start at :?
Number of guest pages is not compatible with the host. Try npages=16
Report the optimal memory slots instead of failing the test when
the memory area in each slot isn't aligned to host page size. With
this applied, the optimal memory slots is reported.
# ./memslot_perf_test -v -s 1000
Number of memory slots: 999
Testing map performance with 1 runs, 5 seconds each
Memslot count too high for this test, decrease the cap (max is 514)
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The addresses and sizes passed to vm_userspace_mem_region_add() and
madvise() should be aligned to host page size, which can be 64KB on
aarch64. So it's wrong by passing additional fixed 4KB memory area
to various tests.
Fix it by passing additional fixed 64KB memory area to various tests.
We also add checks to ensure that none of host/guest page size exceeds
64KB. MEM_TEST_MOVE_SIZE is fixed up to 192KB either.
With this, the following command works fine on 64KB-page-size-host and
4KB-page-size-guest.
# ./memslot_perf_test -v -s 512
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The test case is obviously broken on aarch64 because non-4KB guest
page size is supported. The guest page size on aarch64 could be 4KB,
16KB or 64KB.
This supports variable guest page size, mostly for aarch64.
- The host determines the guest page size when virtual machine is
created. The value is also passed to guest through the synchronization
area.
- The number of guest pages are unknown until the virtual machine
is to be created. So all the related macros are dropped. Instead,
their values are dynamically calculated based on the guest page
size.
- The static checks on memory sizes and pages becomes dependent
on guest page size, which is unknown until the virtual machine
is about to be created. So all the static checks are converted
to dynamic checks, done in check_memory_sizes().
- As the address passed to madvise() should be aligned to host page,
the size of page chunk is automatically selected, other than one
page.
- MEM_TEST_MOVE_SIZE has fixed and non-working 64KB. It will be
consolidated in next patch. However, the comments about how
it's calculated has been correct.
- All other changes included in this patch are almost mechanical
replacing '4096' with 'guest_page_size'.
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
prepare_vm() is called in every iteration and run. The allowed memory
slots (KVM_CAP_NR_MEMSLOTS) are probed for multiple times. It's not
free and unnecessary.
Move the probing logic for the allowed memory slots to parse_args()
for once, which is upper layer of prepare_vm().
No functional change intended.
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There are two loops in prepare_vm(), which have different conditions.
'slot' is treated as meory slot index in the first loop, but index of
the host virtual address array in the second loop. It makes it a bit
hard to understand the code.
Change the usage of 'slot' in the second loop, to treat it as the
memory slot index either.
No functional change intended.
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In prepare_vm(), 'data->nslots' is assigned with 'max_mem_slots - 1'
at the beginning, meaning they are interchangeable.
Use 'data->nslots' isntead of 'max_mem_slots - 1'. With this, it
becomes easier to move the logic of probing number of slots into
upper layer in subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In the dirty ring case, we rely on vcpu exit due to full dirty ring
state. On ARM64 system, there are 4096 host pages when the host
page size is 64KB. In this case, the vcpu never exits due to the
full dirty ring state. The similar case is 4KB page size on host
and 64KB page size on guest. The vcpu corrupts same set of host
pages, but the dirty page information isn't collected in the main
thread. This leads to infinite loop as the following log shows.
# ./dirty_log_test -M dirty-ring -c 65536 -m 5
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory offset: 0xffbffe0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
Iteration 1 collected 576 pages
<No more output afterwards>
Fix the issue by automatically choosing the best dirty ring size,
to ensure vcpu exit due to full dirty ring state. The option '-c'
becomes a hint to the dirty ring count, instead of the value of it.
Signed-off-by: Gavin Shan <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There are two states, which need to be cleared before next mode
is executed. Otherwise, we will hit failure as the following messages
indicate.
- The variable 'dirty_ring_vcpu_ring_full' shared by main and vcpu
thread. It's indicating if the vcpu exit due to full ring buffer.
The value can be carried from previous mode (VM_MODE_P40V48_4K) to
current one (VM_MODE_P40V48_64K) when VM_MODE_P40V48_16K isn't
supported.
- The current ring buffer index needs to be reset before next mode
(VM_MODE_P40V48_64K) is executed. Otherwise, the stale value is
carried from previous mode (VM_MODE_P40V48_4K).
# ./dirty_log_test -M dirty-ring
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory offset: 0xffbfffc000
:
Dirtied 995328 pages
Total bits checked: dirty (1012434), clear (7114123), track_next (966700)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
vcpu continues now.
Notifying vcpu to continue
Iteration 1 collected 0 pages
vcpu stops because dirty ring is full...
vcpu continues now.
vcpu stops because dirty ring is full...
vcpu continues now.
vcpu stops because dirty ring is full...
==== Test Assertion Failure ====
dirty_log_test.c:369: cleared == count
pid=10541 tid=10541 errno=22 - Invalid argument
1 0x0000000000403087: dirty_ring_collect_dirty_pages at dirty_log_test.c:369
2 0x0000000000402a0b: log_mode_collect_dirty_pages at dirty_log_test.c:492
3 (inlined by) run_test at dirty_log_test.c:795
4 (inlined by) run_test at dirty_log_test.c:705
5 0x0000000000403a37: for_each_guest_mode at guest_modes.c:100
6 0x0000000000401ccf: main at dirty_log_test.c:938
7 0x0000ffff9ecd279b: ?? ??:0
8 0x0000ffff9ecd286b: ?? ??:0
9 0x0000000000401def: _start at ??:?
Reset dirty pages (0) mismatch with collected (35566)
Fix the issues by clearing 'dirty_ring_vcpu_ring_full' and the ring
buffer index before next new mode is to be executed.
Signed-off-by: Gavin Shan <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In vcpu_map_dirty_ring(), the guest's page size is used to figure out
the offset in the virtual area. It works fine when we have same page
sizes on host and guest. However, it fails when the page sizes on host
and guest are different on arm64, like below error messages indicates.
# ./dirty_log_test -M dirty-ring -m 7
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
==== Test Assertion Failure ====
lib/kvm_util.c:1477: addr == MAP_FAILED
pid=9000 tid=9000 errno=0 - Success
1 0x0000000000405f5b: vcpu_map_dirty_ring at kvm_util.c:1477
2 0x0000000000402ebb: dirty_ring_collect_dirty_pages at dirty_log_test.c:349
3 0x00000000004029b3: log_mode_collect_dirty_pages at dirty_log_test.c:478
4 (inlined by) run_test at dirty_log_test.c:778
5 (inlined by) run_test at dirty_log_test.c:691
6 0x0000000000403a57: for_each_guest_mode at guest_modes.c:105
7 0x0000000000401ccf: main at dirty_log_test.c:921
8 0x0000ffffb06ec79b: ?? ??:0
9 0x0000ffffb06ec86b: ?? ??:0
10 0x0000000000401def: _start at ??:?
Dirty ring mapped private
Fix the issue by using host's page size to map the ring buffer.
Signed-off-by: Gavin Shan <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When using the flags in KVM_X86_SET_MSR_FILTER and
KVM_CAP_X86_USER_SPACE_MSR it is expected that an attempt to write to
any of the unused bits will fail. Add testing to walk over every bit
in each of the flag fields in MSR filtering and MSR exiting to verify
that unused bits return and error and used bits, i.e. valid bits,
succeed.
Signed-off-by: Aaron Lewis <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Some users of KVM implement the UEFI variable store through a paravirtual device
that does not require the "SMM lockbox" component of edk2; allow them to
compile out system management mode, which is not a full implementation
especially in how it interacts with nested virtualization.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Tag "guest_saw_irq" as "volatile" to ensure that the compiler will never
optimize away lookups. Relying on the compiler thinking that the flag
is global and thus might change also works, but it's subtle, less robust,
and looks like a bug at first glance, e.g. risks being "fixed" and
breaking the test.
Make the flag "static" as well since convincing the compiler it's global
is no longer necessary.
Alternatively, the flag could be accessed with {READ,WRITE}_ONCE(), but
literally every access would need the wrappers, and eking out performance
isn't exactly top priority for selftests.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Tests for races between shinfo_cache (de)activation and hypercall+ioctl()
processing. KVM has had bugs where activating the shared info cache
multiple times and/or with concurrent users results in lock corruption,
NULL pointer dereferences, and other fun.
For the timer injection testcase (#22), re-arm the timer until the IRQ
is successfully injected. If the timer expires while the shared info
is deactivated (invalid), KVM will drop the event.
Signed-off-by: Michal Luczaj <[email protected]>
Co-developed-by: Sean Christopherson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.1, take #1
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
|
|
memslot_modification_stress_test
It's required by vm_userspace_mem_region_add() that memory size
should be aligned to host page size. However, one guest page is
provided by memslot_modification_stress_test. It triggers failure
in the scenario of 64KB-page-size-host and 4KB-page-size-guest,
as the following messages indicate.
# ./memslot_modification_stress_test
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory: [0xffbfff0000, 0xffffff0000)
Finished creating vCPUs
Started all vCPUs
==== Test Assertion Failure ====
lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages
pid=5712 tid=5712 errno=0 - Success
1 0x0000000000404eeb: vm_userspace_mem_region_add at kvm_util.c:822
2 0x0000000000401a5b: add_remove_memslot at memslot_modification_stress_test.c:82
3 (inlined by) run_test at memslot_modification_stress_test.c:110
4 0x0000000000402417: for_each_guest_mode at guest_modes.c:100
5 0x00000000004016a7: main at memslot_modification_stress_test.c:187
6 0x0000ffffb8cd4383: ?? ??:0
7 0x0000000000401827: _start at :?
Number of guest pages is not compatible with the host. Try npages=16
Fix the issue by providing 16 guest pages to the memory slot for this
particular combination of 64KB-page-size-host and 4KB-page-size-guest
on aarch64.
Fixes: ef4c9f4f65462 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Signed-off-by: Gavin Shan <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit 98f94ce42ac6 ("KVM: selftests: Move KVM_CREATE_DEVICE_TEST code to
separate helper") wrongly converted a "real" GIC device creation to
__kvm_test_create_device() and caused the test failure on my D05 (which
supports v2 emulation). Fix it.
Fixes: 98f94ce42ac6 ("KVM: selftests: Move KVM_CREATE_DEVICE_TEST code to separate helper")
Signed-off-by: Zenghui Yu <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v6.1
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
|
|
* kvm-arm64/misc-6.1:
: .
: Misc KVM/arm64 fixes and improvement for v6.1
:
: - Simplify the affinity check when moving a GICv3 collection
:
: - Tone down the shouting when kvm-arm.mode=protected is passed
: to a guest
:
: - Fix various comments
:
: - Advertise the new [email protected] and deprecate the
: old Columbia list
: .
KVM: arm64: Advertise new kvmarm mailing list
KVM: arm64: Fix comment typo in nvhe/switch.c
KVM: selftests: Update top-of-file comment in psci_test
KVM: arm64: Ignore kvm-arm.mode if !is_hyp_mode_available()
KVM: arm64: vgic: Remove duplicate check in update_affinity_collection()
Signed-off-by: Marc Zyngier <[email protected]>
|
|
* kvm-arm64/dirty-log-ordered:
: .
: Retrofit some ordering into the existing API dirty-ring by:
:
: - relying on acquire/release semantics which are the default on x86,
: but need to be explicit on arm64
:
: - adding a new capability that indicate which flavor is supported, either
: with explicit ordering (arm64) or both implicit and explicit (x86),
: as suggested by Paolo at KVM Forum
:
: - documenting the requirements for this new capability on weakly ordered
: architectures
:
: - updating the selftests to do the right thing
: .
KVM: selftests: dirty-log: Use KVM_CAP_DIRTY_LOG_RING_ACQ_REL if available
KVM: selftests: dirty-log: Upgrade flag accesses to acquire/release semantics
KVM: Document weakly ordered architecture requirements for dirty ring
KVM: x86: Select CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL
KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option
KVM: Use acquire/release semantics when accessing dirty ring GFN state
Signed-off-by: Marc Zyngier <[email protected]>
|
|
KVM x86 updates for 6.1, batch #2:
- Misc PMU fixes and cleanups.
- Fixes for Hyper-V hypercall selftest
|
|
Map the test's huge page region with 2MiB virtual mappings when TDP is
disabled so that KVM can shadow the region with huge pages. This fixes
nx_huge_pages_test on hosts where TDP hardware support is disabled.
Purposely do not skip this test on TDP-disabled hosts. While we don't
care about NX Huge Pages on TDP-disabled hosts from a security
perspective, KVM does support it, and so we should test it.
For TDP-enabled hosts, continue mapping the region with 4KiB pages to
ensure that KVM can map it with huge pages irrespective of the guest
mappings.
Fixes: 8448ec5993be ("KVM: selftests: Add NX huge pages test")
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add helper functions for reading the value of kvm_intel and kvm_amd
boolean module parameters. Use the kvm_intel variant in
vm_is_unrestricted_guest() to simplify the check for
kvm_intel.unrestricted_guest.
No functional change intended.
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add __builtin_unreachable() to TEST_FAIL() so that the compiler knows
that any code after a TEST_FAIL() is unreachable.
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Revert back to using memset() in generic_svm_setup() now that KVM
selftests override memset() and friends specifically to prevent the
compiler from generating fancy code and/or linking to the libc
implementation.
This reverts commit ed290e1c20da19fa100a3e0f421aa31b65984960.
Suggested-by: Jim Mattson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Combine fix_hypercall_test's two subtests into a common routine, the only
difference between the two is whether or not the quirk is disabled.
Passing a boolean is a little gross, but using an enum to make it super
obvious that the callers are enabling/disabling the quirk seems like
overkill.
No functional change intended.
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Explicitly verify that KVM doesn't patch in the native hypercall if the
FIX_HYPERCALL_INSN quirk is disabled. The test currently verifies that
a #UD occurred, but doesn't actually verify that no patching occurred.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Hardcode the VMCALL/VMMCALL opcodes in dedicated arrays instead of
extracting the opcodes from inline asm, and patch in the "other" opcode
so as to preserve the original opcode, i.e. the opcode that the test
executes in the guest.
Preserving the original opcode (by not patching the source), will make
it easier to implement a check that KVM doesn't modify the opcode (the
test currently only verifies that a #UD occurred).
Use INT3 (0xcc) as the placeholder so that the guest will likely die a
horrible death if the test's patching goes awry.
As a bonus, patching from within the test dedups a decent chunk of code.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Use input constraints to load RAX and RBX when testing that KVM correctly
does/doesn't patch the "wrong" hypercall. There's no need to manually
load RAX and RBX, and no reason to clobber them either (KVM is not
supposed to modify anything other than RAX).
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Directly compare the expected versus observed hypercall instructions when
verifying that KVM patched in the native hypercall (FIX_HYPERCALL_INSN
quirk enabled). gcc rightly complains that doing a 4-byte memcpy() with
an "unsigned char" as the source generates an out-of-bounds accesses.
Alternatively, "exp" and "obs" could be declared as 3-byte arrays, but
there's no known reason to copy locally instead of comparing directly.
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:63:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
63 | memcpy(&exp, exp_insn, sizeof(exp));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:64:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
64 | memcpy(&obs, obs_insn, sizeof(obs));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [../lib.mk:135: tools/testing/selftests/kvm/x86_64/fix_hypercall_test] Error 1
Fixes: 6c2fa8b20d0c ("selftests: KVM: Test KVM_X86_QUIRK_FIX_HYPERCALL_INSN")
Cc: Oliver Upton <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|