aboutsummaryrefslogtreecommitdiff
path: root/tools/testing/selftests/kvm/lib/x86_64
AgeCommit message (Collapse)AuthorFilesLines
2021-05-07selftests: kvm: remove reassignment of non-absolute variablesBill Wendling1-2/+2
Clang's integrated assembler does not allow symbols with non-absolute values to be reassigned. Modify the interrupt entry loop macro to be compatible with IAS by using a label and an offset. Cc: Jian Cai <[email protected]> Signed-off-by: Bill Wendling <[email protected]> References: https://lore.kernel.org/lkml/[email protected]/ Message-Id: <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-15selftests: kvm: avoid uninitialized variable warningPaolo Bonzini1-1/+2
The variable in practice will never be uninitialized, because the loop will always go through at least one iteration. In case it would not, make vcpu_get_cpuid report an assertion failure. Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-11KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.cRicardo Koller1-4/+4
Building the KVM selftests with LLVM's integrated assembler fails with: $ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang lib/x86_64/svm.c:77:16: error: too few operands for instruction asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory"); ^ <inline asm>:1:2: note: instantiated into assembly here vmsave ^ lib/x86_64/svm.c:134:3: error: too few operands for instruction "vmload\n\t" ^ <inline asm>:1:2: note: instantiated into assembly here vmload ^ This is because LLVM IAS does not currently support calling vmsave, vmload, or vmload without an explicit %rax operand. Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing this was suggested by Sean Christopherson. Tested: building without this error in clang 11. The following patch (not queued yet) needs to be applied to solve the other remaining error: "selftests: kvm: remove reassignment of non-absolute variables". Suggested-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/kvm/[email protected]/ Reviewed-by: Jim Mattson <[email protected]> Signed-off-by: Ricardo Koller <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-09KVM: x86: hyper-v: Make Hyper-V emulation enablement conditionalVitaly Kuznetsov1-0/+35
Hyper-V emulation is enabled in KVM unconditionally. This is bad at least from security standpoint as it is an extra attack surface. Ideally, there should be a per-VM capability explicitly enabled by VMM but currently it is not the case and we can't mandate one without breaking backwards compatibility. We can, however, check guest visible CPUIDs and only enable Hyper-V emulation when "Hv#1" interface was exposed in HYPERV_CPUID_INTERFACE. Note, VMMs are free to act in any sequence they like, e.g. they can try to set MSRs first and CPUIDs later so we still need to allow the host to read/write Hyper-V specific MSRs unconditionally. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> [Add selftest vcpu_set_hv_cpuid API to avoid breaking xen_vmcall_test. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-09selftests: kvm: Move kvm_get_supported_hv_cpuid() to common codeVitaly Kuznetsov1-0/+33
kvm_get_supported_hv_cpuid() may come handy in all Hyper-V related tests. Split it off hyperv_cpuid test, create system-wide and vcpu versions. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04selftest: kvm: x86: test KVM_GET_CPUID2 and guest visible CPUIDs against ↵Vitaly Kuznetsov1-0/+42
KVM_GET_SUPPORTED_CPUID Commit 181f494888d5 ("KVM: x86: fix CPUID entries returned by KVM_GET_CPUID2 ioctl") revealed that we're not testing KVM_GET_CPUID2 ioctl at all. Add a test for it and also check that from inside the guest visible CPUIDs are equal to it's output. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04selftests: kvm/x86: add test for pmu msr MSR_IA32_PERF_CAPABILITIESLike Xu1-0/+34
This test will check the effect of various CPUID settings on the MSR_IA32_PERF_CAPABILITIES MSR, check that whatever user space writes with KVM_SET_MSR is _not_ modified from the guest and can be retrieved with KVM_GET_MSR, and check that invalid LBR formats are rejected. Signed-off-by: Like Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-15KVM: selftests: Make vm_create_default commonAndrew Jones1-32/+0
The code is almost 100% the same anyway. Just move it to common and add a few arch-specific macros. Reviewed-by: Peter Xu <[email protected]> Reviewed-by: Ben Gardon <[email protected]> Signed-off-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08selftests: kvm: test enforcement of paravirtual cpuid featuresOliver Upton1-0/+29
Add a set of tests that ensure the guest cannot access paravirtual msrs and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf. Expect a #GP in the case of msr accesses and -KVM_ENOSYS from hypercalls. Cc: Jim Mattson <[email protected]> Signed-off-by: Oliver Upton <[email protected]> Reviewed-by: Peter Shier <[email protected]> Reviewed-by: Aaron Lewis <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08selftests: kvm: Add exception handling to selftestsAaron Lewis2-3/+192
Add the infrastructure needed to enable exception handling in selftests. This allows any of the exception and interrupt vectors to be overridden in the guest. Signed-off-by: Aaron Lewis <[email protected]> Reviewed-by: Alexander Graf <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08selftests: kvm: Clear uc so UCALL_NONE is being properly reportedAaron Lewis1-0/+3
Ensure the out value 'uc' in get_ucall() is properly reporting UCALL_NONE if the call fails. The return value will be correctly reported, however, the out parameter 'uc' will not be. Clear the struct to ensure the correct value is being reported in the out parameter. Signed-off-by: Aaron Lewis <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Reviewed-by: Alexander Graf <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08selftests: kvm: Fix the segment descriptor layout to match the actual layoutAaron Lewis1-1/+2
Fix the layout of 'struct desc64' to match the layout described in the SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5 "Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added later in this series relies on this and crashes if this layout is not correct. Signed-off-by: Aaron Lewis <[email protected]> Reviewed-by: Alexander Graf <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-10-31KVM: selftests: test behavior of unmapped L2 APIC-access addressJim Mattson1-0/+9
Add a regression test for commit 671ddc700fd0 ("KVM: nVMX: Don't leak L1 MMIO regions to L2"). First, check to see that an L2 guest can be launched with a valid APIC-access address that is backed by a page of L1 physical memory. Next, set the APIC-access address to a (valid) L1 physical address that is not backed by memory. KVM can't handle this situation, so resuming L2 should result in a KVM exit for internal error (emulation). Signed-off-by: Jim Mattson <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Reviewed-by: Peter Shier <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-11KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE checkVitaly Kuznetsov2-5/+14
state_test/smm_test use KVM_CAP_NESTED_STATE check as an indicator for nested VMX/SVM presence and this is incorrect. Check for the required features dirrectly. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-06KVM: selftests: Fix build for evmcs.hPeter Xu1-0/+3
I got this error when building kvm selftests: /usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here /usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here I think it's because evmcs.h is included both in a test file and a lib file so the structs have multiple declarations when linking. After all it's not a good habit to declare structs in the header files. Cc: Vitaly Kuznetsov <[email protected]> Signed-off-by: Peter Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-03-16KVM: selftests: define and use EVMCS_VERSIONVitaly Kuznetsov1-1/+1
KVM allows to use revision_id from MSR_IA32_VMX_BASIC as eVMCS revision_id to workaround a bug in genuine Hyper-V (see the comment in nested_vmx_handle_enlightened_vmptrld()), this shouldn't be used by default. Switch to using KVM_EVMCS_VERSION(1). Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-03-16selftests: kvm: Uses TEST_FAIL in tests/utilitiesWainer dos Santos Moschetta1-3/+2
Changed all tests and utilities to use TEST_FAIL macro instead of TEST_ASSERT(false,...). Signed-off-by: Wainer dos Santos Moschetta <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-03-16KVM: selftests: Use consistent message for test skippingAndrew Jones2-2/+2
Signed-off-by: Andrew Jones <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-03-16KVM: selftests: Share common API documentationAndrew Jones1-155/+41
Move function documentation comment blocks to the header files in order to avoid duplicating them for each architecture. While at it clean up and fix up the comment blocks. Signed-off-by: Andrew Jones <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-12selftests: KVM: AMD Nested test infrastructureEric Auger1-0/+161
Add the basic infrastructure needed to test AMD nested SVM. This is largely copied from the KVM unit test infrastructure. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-12selftests: KVM: Replace get_{gdt,idt}_base() by get_{gdt,idt}()Eric Auger1-3/+3
get_gdt_base() and get_idt_base() only return the base address of the descriptor tables. Soon we will need to get the size as well. Change the prototype of those functions so that they return the whole desc_ptr struct instead of the address field. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Reviewed-by: Miaohe Lin <[email protected]> Reviewed-by: Wei Huang <[email protected]> Reviewed-by: Krish Sadhukhan <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-01-13tools/x86: Sync msr-index.h from kernel sourcesSean Christopherson1-4/+4
Sync msr-index.h to pull in recent renames of the IA32_FEATURE_CONTROL MSR definitions. Update KVM's VMX selftest and turbostat accordingly. Keep the full name in turbostat's output to avoid breaking someone's workflow, e.g. if a script is looking for the full name. While using the renamed defines is by no means necessary, do the sync now to avoid leaving a landmine that will get stepped on the next time msr-index.h needs to be refreshed for some other reason. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-10-22kvm: tests: Add test to verify MSR_IA32_XSSAaron Lewis1-9/+63
Ensure that IA32_XSS appears in KVM_GET_MSR_INDEX_LIST if it can be set to a non-zero value. Reviewed-by: Jim Mattson <[email protected]> Signed-off-by: Aaron Lewis <[email protected]> Change-Id: Ia2d644f69e2d6d8c27d7e0a7a45c2bf9c42bf5ff Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-22selftests: kvm: consolidate VMX support checksVitaly Kuznetsov1-0/+10
vmx_* tests require VMX and three of them implement the same check. Move it to vmx library. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-09-27KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failureVitaly Kuznetsov1-1/+1
When KVM_GET_MSRS fail the report looks like ==== Test Assertion Failure ==== lib/x86_64/processor.c:1089: r == nmsrs pid=28775 tid=28775 - Argument list too long 1 0x000000000040a55f: vcpu_save_state at processor.c:1088 (discriminator 3) 2 0x00000000004010e3: main at state_test.c:171 (discriminator 4) 3 0x00007fb8e69223d4: ?? ??:0 4 0x0000000000401287: _start at ??:? Unexpected result from KVM_GET_MSRS, r: 36 (failed at 194) and it's not obvious that '194' here is the failed MSR index and that it's printed in hex. Change that. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-09-27selftests: kvm: add test for dirty logging inside nested guestsPaolo Bonzini1-2/+199
Check that accesses by nested guests are logged according to the L1 physical addresses rather than L2. Most of the patch is really adding EPT support to the testing framework. Signed-off-by: Paolo Bonzini <[email protected]>
2019-09-25KVM: selftests: fix ucall on x86Vitaly Kuznetsov1-1/+1
After commit e8bb4755eea2("KVM: selftests: Split ucall.c into architecture specific files") selftests which use ucall on x86 started segfaulting and apparently it's gcc to blame: it "optimizes" ucall() function throwing away va_start/va_end part because it thinks the structure is not being used. Previously, it couldn't do that because the there was also MMIO version and the decision which particular implementation to use was done at runtime. With older gccs it's possible to solve the problem by adding 'volatile' to 'struct ucall' but at least with gcc-8.3 this trick doesn't work. 'memory' clobber seems to do the job. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-09-24KVM: selftests: Introduce VM_MODE_PXXV48_4KPeter Xu1-4/+26
The naming VM_MODE_P52V48_4K is explicit but unclear when used on x86_64 machines, because x86_64 machines are having various physical address width rather than some static values. Here's some examples: - Intel Xeon E3-1220: 36 bits - Intel Core i7-8650: 39 bits - AMD EPYC 7251: 48 bits All of them are using 48 bits linear address width but with totally different physical address width (and most of the old machines should be less than 52 bits). Let's create a new guest mode called VM_MODE_PXXV48_4K for current x86_64 tests and make it as the default to replace the old naming of VM_MODE_P52V48_4K because it shows more clearly that the PA width is not really a constant. Meanwhile we also stop assuming all the x86 machines are having 52 bits PA width but instead we fetch the real vm->pa_bits from CPUID 0x80000008 during runtime. We currently make this exclusively used by x86_64 but no other arch. As a slight touch up, moving DEBUG macro from dirty_log_test.c to kvm_util.h so lib can use it too. Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-09-11Merge tag 'kvm-s390-next-5.4-1' of ↵Paolo Bonzini1-0/+56
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD * More selftests * Improved KVM_S390_MEM_OP ioctl input checking * Add kvm_valid_regs and kvm_dirty_regs invalid bit checking
2019-08-21selftests: kvm: fix state save/load on processors without XSAVEPaolo Bonzini1-6/+10
state_test and smm_test are failing on older processors that do not have xcr0. This is because on those processor KVM does provide support for KVM_GET/SET_XSAVE (to avoid having to rely on the older KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS. Signed-off-by: Paolo Bonzini <[email protected]>
2019-08-15selftests: kvm: provide common function to enable eVMCSPaolo Bonzini1-0/+20
There are two tests already enabling eVMCS and a third is coming. Add a function that enables the capability and tests the result. Signed-off-by: Paolo Bonzini <[email protected]>
2019-08-02KVM: selftests: Split ucall.c into architecture specific filesThomas Huth1-0/+56
The way we exit from a guest to userspace is very specific to the architecture: On x86, we use PIO, on aarch64 we are using MMIO and on s390x we're going to use an instruction instead. The possibility to select a type via the ucall_type_t enum is currently also completely unused, so the code in ucall.c currently looks more complex than required. Let's split this up into architecture specific ucall.c files instead, so we can get rid of the #ifdefs and the unnecessary ucall_type_t handling. Reviewed-by: Andrew Jones <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Acked-by: Paolo Bonzini <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]>
2019-07-20KVM: selftests: Remove superfluous define from vmx.cThomas Huth1-2/+0
The code in vmx.c does not use "program_invocation_name", so there is no need to "#define _GNU_SOURCE" here. Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-07-15Merge tag 'kvm-s390-next-5.3-1' of ↵Paolo Bonzini1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: add kselftests This is the initial implementation for KVM selftests on s390.
2019-07-11Merge tag 'kvm-arm-for-5.3' of ↵Paolo Bonzini2-4/+18
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for 5.3 - Add support for chained PMU counters in guests - Improve SError handling - Handle Neoverse N1 erratum #1349291 - Allow side-channel mitigation status to be migrated - Standardise most AArch64 system register accesses to msr_s/mrs_s - Fix host MPIDR corruption on 32bit
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482Thomas Gleixner2-4/+2
Based on 1 normalized pattern(s): this work is licensed under the terms of the gnu gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 48 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Enrico Weigelt <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-19tests: kvm: Check for a kernel warningAaron Lewis1-0/+16
When running with /sys/module/kvm_intel/parameters/unrestricted_guest=N, test that a kernel warning does not occur informing us that vcpu->mmio_needed=1. This can happen when KVM_RUN is called after a triple fault. This test was made to detect a bug that was reported by Syzkaller (https://groups.google.com/forum/#!topic/syzkaller/lHfau8E3SOE) and fixed with commit bbeac2830f4de ("KVM: X86: Fix residual mmio emulation request to userspace"). Signed-off-by: Aaron Lewis <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Reviewed-by: Peter Shier <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-06-05kvm: selftests: hide vcpu_setup in processor codePaolo Bonzini1-2/+3
This removes the processor-dependent arguments from vm_vcpu_add. Signed-off-by: Paolo Bonzini <[email protected]>
2019-06-04KVM: selftests: Introduce a VM_MODE_DEFAULT macro for the default bitsThomas Huth1-1/+1
This will be required later for tests like the kvm_create_max_vcpus test that do not use the vm_create_default() function. Reviewed-by: Andrew Jones <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Borntraeger <[email protected]>
2019-05-24KVM: selftests: Compile code with warnings enabledThomas Huth1-3/+1
So far the KVM selftests are compiled without any compiler warnings enabled. That's quite bad, since we miss a lot of possible bugs this way. Let's enable at least "-Wall" and some other useful warning flags now, and fix at least the trivial problems in the code (like unused variables). Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-04-16selftests: kvm: add a selftest for SMMVitaly Kuznetsov1-6/+6
Add a simple test for SMM, based on VMX. The test implements its own sync between the guest and the host as using our ucall library seems to be too cumbersome: SMI handler is happening in real-address mode. This patch also fixes KVM_SET_NESTED_STATE to happen after KVM_SET_VCPU_EVENTS, in fact it places it last. This is because KVM needs to know whether the processor is in SMM or not. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-04-16selftests: kvm/evmcs_test: complete I/O before migrating guest statePaolo Bonzini1-0/+8
Starting state migration after an IO exit without first completing IO may result in test failures. We already have two tests that need this (this patch in fact fixes evmcs_test, similar to what was fixed for state_test in commit 0f73bbc851ed, "KVM: selftests: complete IO before migrating guest state", 2019-03-13) and a third is coming. So, move the code to vcpu_save_state, and while at it do not access register state until after I/O is complete. Signed-off-by: Paolo Bonzini <[email protected]>
2018-10-17KVM: selftests: add Enlightened VMCS testVitaly Kuznetsov1-12/+36
Modify test library and add eVMCS test. This includes nVMX save/restore testing. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2018-10-17KVM: selftests: state_test: test bare VMXON migrationVitaly Kuznetsov1-0/+5
Split prepare_for_vmx_operation() into prepare_for_vmx_operation() and load_vmcs() so we can inject GUEST_SYNC() in between. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2018-10-17kvm: selftests: introduce new VM mode for 64K pagesAndrew Jones1-5/+5
Rename VM_MODE_FLAT48PG to be more descriptive of its config and add a new config that has the same parameters, except with 64K pages. Signed-off-by: Andrew Jones <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2018-10-17kvm: selftests: tidy up kvm_utilAndrew Jones1-0/+245
Tidy up kvm-util code: code/comment formatting, remove unused code, and move x86 specific code out. We also move vcpu_dump() out of common code, because not all arches (AArch64) have KVM_GET_REGS. Signed-off-by: Andrew Jones <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2018-10-17kvm: selftests: move arch-specific files to arch-specific locationsAndrew Jones2-0/+1171
Signed-off-by: Andrew Jones <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.