| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This results in passing 0 or just IOMMU_CACHE to iommu_map(). Most of
the page table formats don't like this:
amdv1 - -EINVAL
armv7s - returns 0, doesn't update mapped
arm-lpae - returns 0 doesn't update mapped
dart - returns 0, doesn't update mapped
VT-D - returns -EINVAL
Unfortunately the three formats that return 0 cause serious problems:
- Returning ret = but not uppdating mapped from domain->map_pages()
causes an infinite loop in __iommu_map()
- Not writing ioptes means that VFIO/iommufd have no way to recover them
and we will have memory leaks and worse during unmap
Since almost nothing can support this, and it is a useless thing to do,
block it early in iommufd.
Cc: [email protected]
Fixes: aad37e71d5c4 ("iommufd: IOCTLs for the io_pagetable")
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Nicolin Chen <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
Centralize the _GNU_SOURCE definition to CFLAGS in lib.mk. Remove
redundant defines from Makefiles that import lib.mk. Convert any usage of
"#define _GNU_SOURCE 1" to "#define _GNU_SOURCE".
This uses the form "-D_GNU_SOURCE=", which is equivalent to
"#define _GNU_SOURCE".
Otherwise using "-D_GNU_SOURCE" is equivalent to "-D_GNU_SOURCE=1" and
"#define _GNU_SOURCE 1", which is less commonly seen in source code and
would require many changes in selftests to avoid redefinition warnings.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Edward Liaw <[email protected]>
Suggested-by: John Hubbard <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jarkko Sakkinen <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kevin Tian <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Reinette Chatre <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Lu Baolu says:
====================
This series implements the functionality of delivering IO page faults to
user space through the IOMMUFD framework. One feasible use case is the
nested translation. Nested translation is a hardware feature that supports
two-stage translation tables for IOMMU. The second-stage translation table
is managed by the host VMM, while the first-stage translation table is
owned by user space. This allows user space to control the IOMMU mappings
for its devices.
When an IO page fault occurs on the first-stage translation table, the
IOMMU hardware can deliver the page fault to user space through the
IOMMUFD framework. User space can then handle the page fault and respond
to the device top-down through the IOMMUFD. This allows user space to
implement its own IO page fault handling policies.
User space application that is capable of handling IO page faults should
allocate a fault object, and bind the fault object to any domain that it
is willing to handle the fault generatd for them. On a successful return
of fault object allocation, the user can retrieve and respond to page
faults by reading or writing to the file descriptor (FD) returned.
The iommu selftest framework has been updated to test the IO page fault
delivery and response functionality.
====================
* iommufd_pri:
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Extend the selftest tool to add coverage of testing IOPF handling. This
would include the following tests:
- Allocating and destroying an iommufd fault object.
- Allocating and destroying an IOPF-capable HWPT.
- Attaching/detaching/replacing an IOPF-capable HWPT on a device.
- Triggering an IOPF on the mock device.
- Retrieving and responding to the IOPF through the file interface.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
commit a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
added tests covering edge cases in the boundaries of iova bitmap. Although
it used buffer sizes thinking in PAGE_SIZE (4K) as opposed to the
MOCK_PAGE_SIZE (2K) that is used in iommufd mock selftests. This meant that
isn't correctly exercising everything specifically the u32 and 4K bitmap
test cases. Fix selftests buffer sizes to be based on mock page size.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Kevin Tian <[email protected]>
Closes: https://lore.kernel.org/linux-iommu/[email protected]/
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Matt Ochs <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Add more tests for bitmaps smaller than or equal to an u8, though skip the
tests if the IOVA buffer size is smaller than the mock page size.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Matt Ochs <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
With 64k base pages, the first 128k iova length test requires less than a
byte for a bitmap, exposing a bug in the tests that assume that bitmaps are
at least a byte.
Rather than dealing with bytes, have _test_mock_dirty_bitmaps() pass the
number of bits. The caller functions are adjusted to also use bits as well,
and converting to bytes when clearing, allocating and freeing the bitmap.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Matt Ochs <[email protected]>
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Matt Ochs <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Add FAULT_INJECTION_DEBUG_FS and FAILSLAB configurations to the kconfig
fragment for the iommfd selftests. These kconfigs are needed by the
iommufd_fail_nth test.
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706fe ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Leverage previously added MOCK_FLAGS_DEVICE_HUGE_IOVA flag to create an
IOMMU domain with more than MOCK_IO_PAGE_SIZE supported.
Plumb the hugetlb backing memory for buffer allocation and change the
expected page size to MOCK_HUGE_PAGE_SIZE (1M) when hugepage variant test
cases are used. These so far are limited to 128M and 256M IOVA range tests
cases which is when 1M hugepages can be used.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Rework the functions that test and set the bitmaps to receive a new
parameter (the pte_page_size) that reflects the expected PTE size in the
page tables. The same scheme is still used i.e. even bits are dirty and
odd page indexes aren't dirty. Here it just refactors to consider the size
of the PTE rather than hardcoded to IOMMU mock base page assumptions.
While at it, refactor dirty bitmap tests to use the idev_id created by the
fixture instead of creating a new one.
This is in preparation for doing tests with IOMMU hugepages where multiple
bits set as part of recording a whole hugepage as dirty and thus the
pte_page_size will vary depending on io hugepages or io base pages.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Exercise the dirty tracking bitmaps with byte unaligned addresses in
addition to the PAGE_SIZE unaligned bitmaps, using a address towards the
end of the page boundary.
In doing so, increase the tailroom we allocate for the bitmap from
MOCK_PAGE_SIZE(2K) into PAGE_SIZE(4K), such that we can test end of bitmap
boundary.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Add test cases for the IOMMU_HWPT_INVALIDATE ioctl and verify it by using
the new IOMMU_TEST_OP_MD_CHECK_IOTLB.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Co-developed-by: Yi Liu <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Allow to test whether IOTLB has been invalidated or not.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The ASSERT_EQ() macro sneakily expands to two statements, so the loop here
needs braces to ensure it captures both and actually terminates the test
upon failure. Where these tests are currently failing on my arm64 machine,
this reduces the number of logged lines from a rather unreasonable
~197,000 down to 10. While we're at it, we can also clean up the
tautologous "count" calculations whose assertions can never fail unless
mathematics and/or the C language become fundamentally broken.
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://lore.kernel.org/r/90e083045243ef407dd592bb1deec89cd1f4ddf2.1700153535.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Joao Martins <[email protected]>
Tested-by: Joao Martins <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The IOMMU_HWPT_ALLOC ioctl now supports passing user_data to allocate a
user-managed domain for nested HWPTs. Add its coverage for that. Also,
update _test_cmd_hwpt_alloc() and add test_cmd/err_hwpt_alloc_nested().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Change test_mock_dirty_bitmaps() to pass a flag where it specifies the flag
under test. The test does the same thing as the GET_DIRTY_BITMAP regular
test. Except that it tests whether the dirtied bits are fetched all the
same a second time, as opposed to observing them cleared.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Enumerate the capabilities from the mock device and test whether it
advertises as expected. Include it as part of the iommufd_dirty_tracking
fixture.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Add a new test ioctl for simulating the dirty IOVAs in the mock domain, and
implement the mock iommu domain ops that get the dirty tracking supported.
The selftest exercises the usual main workflow of:
1) Setting dirty tracking from the iommu domain
2) Read and clear dirty IOPTEs
Different fixtures will test different IOVA range sizes, that exercise
corner cases of the bitmaps.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Change mock_domain to supporting dirty tracking and add tests to exercise
the new SET_DIRTY_TRACKING API in the iommufd_dirty_tracking selftest
fixture.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
In order to selftest the iommu domain dirty enforcing implement the
mock_domain necessary support and add a new dev_flags to test that the
hwpt_alloc/attach_device fails as expected.
Expand the existing mock_domain fixture with a enforce_dirty test that
exercises the hwpt_alloc and device attachment.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Expand mock_domain test to be able to manipulate the device capabilities.
This allows testing with mockdev without dirty tracking support advertised
and thus make sure enforce_dirty test does the expected.
To avoid breaking IOMMUFD_TEST UABI replicate the mock_domain struct and
thus add an input dev_flags at the end.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
TEST_LENGTH passing ".size = sizeof(struct _struct) - 1" expects -EINVAL
from "if (ucmd.user_size < op->min_size)" check in iommufd_fops_ioctl().
This has been working when min_size is exactly the size of the structure.
However, if the size of the structure becomes larger than min_size, i.e.
the passing size above is larger than min_size, that min_size sanity no
longer works.
Since the first test in TEST_LENGTH() was to test that min_size sanity
routine, rework it to support a min_size calculation, rather than using
the full size of the structure.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolin Chen <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Add mock_domain_alloc_user() and a new test case for
IOMMU_HWPT_ALLOC_NEST_PARENT.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Nicolin Chen <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The point in iterating variant->mock_domains is to test the idev_ids[0]
and idev_ids[1]. So use it instead of keeping testing idev_ids[0] only.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolin Chen <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
requres -> requires
dramtically -> dramatically
Link: https://lore.kernel.org/r/31680D47D9533D91+20230904023236.GA12494@xgk8823
Signed-off-by: GuokaiXu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Add a mock_domain_hw_info function and an iommu_test_hw_info data
structure. This allows to test the IOMMU_GET_HW_INFO ioctl passing the
test_reg value for the mock_dev.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Add a new IOMMU_TEST_OP_ACCESS_REPLACE_IOAS to allow replacing the
access->ioas, corresponding to the iommufd_access_replace() helper.
Then add replace coverage as a part of user_copy test case, which
basically repeats the copy test after replacing the old ioas with a new
one.
Link: https://lore.kernel.org/r/a4897f93d41c34b972213243b8dbf4c3832842e4.1690523699.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Test the basic flow.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Now that we actually call iommufd_device_bind() we can return the
idev_id from that function to userspace for use in other APIs.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Allow the selftest to call the function on the mock idev, add some tests
to exercise it.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Inspired by the syzkaller reproducer check the batch carry path with a
simple test.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
argument
This can now be covered since we have a full struct device.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
iommufd wants to use more infrastructure, like the iommu_group, that the
mock device does not support. Create a more complete mock device that can
go through the whole cycle of ownership, blocking domain, and has an
iommu_group.
This requires creating a real struct device on a real bus to be able to
connect it to a iommu_group. Unfortunately we cannot formally attach the
mock iommu driver as an actual driver as the iommu core does not allow
more than one driver or provide a general way for busses to link to
iommus. This can be solved with a little hack to open code the dev_iommus
struct.
With this infrastructure things work exactly the same as the normal domain
path, including the auto domains mechanism and direct attach of hwpts. As
the created hwpt is now an autodomain it is no longer required to destroy
it and trying to do so will trigger a failure.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
For consistency.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
In this case the domain_id was acting as the hwpt_id, so be clearer.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Nothing uses this for anything more than checking if a mock domain had
been created. Rename it to stdev_id to match our naming system. Currently
domain_id is the hwpt_id.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
It is too confusing now that we have the 'dev_id' as part of the main
interface. Make it clear this is the special selftest device object. This
object is analogous to the VFIO device FD.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
|
|
Use $(KHDR_INCLUDES) as lookup path for installed kernel headers rather
than using kernel headers in include/uapi from the source kernel tree
kernel headers.
Remove bogus ../../../../include/ from the search path, because
kernel source headers are not needed by those user-space selftests, and
it causes issues because -I paths are searched before -isystem paths,
and conflicts for files appearing both in kernel sources and in uapi
headers with incompatible semantics (e.g. types.h).
Signed-off-by: Mathieu Desnoyers <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The test_cmd_destroy_access() should end with a semicolon, so add one.
There is a test_ioctl_destroy(ioas_id) following already, so drop one.
Fixes: 57f0988706fe ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolin Chen <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Cover the essential functionality of the iommufd with a directed test from
userspace. This aims to achieve reasonable functional coverage using the
in-kernel self test framework.
A second test does a failure injection sweep of the success paths to study
error unwind behaviors.
This allows achieving high coverage of the corner cases in pages.c.
The selftest requires CONFIG_IOMMUFD_TEST to be enabled, and several huge
pages which may require:
echo 4 > /proc/sys/vm/nr_hugepages
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Nicolin Chen <[email protected]>
Tested-by: Matthew Rosato <[email protected]> # s390
Tested-by: Yi Liu <[email protected]>
Tested-by: Eric Auger <[email protected]> # aarch64
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|