aboutsummaryrefslogtreecommitdiff
path: root/tools/power/cpupower/utils/helpers
AgeCommit message (Collapse)AuthorFilesLines
2024-05-28tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUsDhananjay Ugwekar1-3/+23
Update cpupower's P-State frequency calculation and reporting with AMD Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due to a change in the PStateDef MSR layout in AMD Family 1Ah+. Tested on 4th and 5th Gen AMD EPYC system Signed-off-by: Ananth Narayan <Ananth.Narayan@amd.com> Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18cpupower: Add turbo-boost support in cpupowerWyes Karny2-0/+21
If boost sysfs (/sys/devices/system/cpu/cpufreq/boost) file is present turbo-boost is feature is supported in the hardware. By default this feature should be enabled. But to disable/enable it write to the sysfs file. Use the same to control this feature via cpupower. To enable: cpupower set --turbo-boost 1 To disable: cpupower set --turbo-boost 0 Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18cpupower: Add support for amd_pstate mode changeWyes Karny2-0/+21
amd_pstate supports changing of its mode dynamically via `status` sysfs file. Add the same capability in cpupower. To change the mode to active mode use below command: cpupower set --amd-pstate-mode active Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18cpupower: Add EPP value change supportWyes Karny2-0/+24
amd_pstate and intel_pstate active mode drivers support energy performance preference feature. Through this user can convey it's energy/performance preference to platform. Add this value change capability to cpupower. To change the EPP value use below command: cpupower set --epp performance Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Perry Yuan <Perry.Yuan@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18cpupower: Recognise amd-pstate active mode driverWyes Karny1-1/+1
amd-pstate active mode driver name is "amd-pstate-epp". Use common prefix for string matching condition to recognise amd-pstate active mode driver. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Perry Yuan <Perry.Yuan@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Add function to print AMD P-State performance capabilitiesHuang Rui2-0/+34
AMD P-State kernel module is using the fine grain frequency instead of acpi hardware pstate. So add a function to print performance and frequency values. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Move print_speed function into misc helperHuang Rui2-0/+41
The print_speed can be as a common function, and expose it into misc helper header. Then it can be used on other helper files as well. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Enable boost state support for AMD P-State moduleHuang Rui3-0/+25
The legacy ACPI hardware P-States function has 3 P-States on ACPI table, the CPU frequency only can be switched between the 3 P-States. While the processor supports the boost state, it will have another boost state that the frequency can be higher than P0 state, and the state can be decoded by the function of decode_pstates() and read by amd_pci_get_num_boost_states(). However, the new AMD P-State function is different than legacy ACPI hardware P-State on AMD processors. That has a finer grain frequency range between the highest and lowest frequency. And boost frequency is actually the frequency which is mapped on highest performance ratio. The similar previous P0 frequency is mapped on nominal performance ratio. If the highest performance on the processor is higher than nominal performance, then we think the current processor supports the boost state. And it uses amd_pstate_boost_init() to initialize boost for AMD P-State function. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Add AMD P-State sysfs definition and access helperHuang Rui1-0/+30
Introduce the marco definitions and access helper function for AMD P-State sysfs interfaces such as each performance goals and frequency levels in amd helper file. They will be used to read the sysfs attribute from AMD P-State cpufreq driver for cpupower utilities. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Initial AMD P-State capabilityHuang Rui1-0/+13
If kernel starts the AMD P-State module, the cpupower will initial the capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State capability is set, it won't need to set legacy ACPI relative capabilities anymore. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Add the function to check AMD P-State enabledHuang Rui2-0/+28
The processor with AMD P-State function also supports legacy ACPI hardware P-States feature as well. Once driver sets AMD P-State eanbled, the processor will respond the finer grain AMD P-State feature instead of legacy ACPI P-States. So it introduces the cpupower_amd_pstate_enabled() to check whether the current kernel enables AMD P-State or AMD CPUFreq module. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Add AMD P-State capability flagHuang Rui1-0/+1
Add AMD P-State capability flag in cpupower to indicate AMD new P-State kernel module support on Ryzen processors. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26cpupower: Add cpuid cap flag for MSR_AMD_HWCR supportNathan Fontenot3-7/+7
Remove the family check for accessing the MSR_AMD_HWCR MSR and replace it with a cpupower cap flag. This update also allows for the removal of the local cpupower_cpu_info variable in cpufreq_has_boost_support() since we no longer need it to check the family. Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26cpupower: Remove family arg to decode_pstates()Nathan Fontenot2-15/+13
The decode_pstates() routine no longer uses the CPU family and the caleed routines (get_cof() and get_did()) can grab the family from the global cpupower_cpu_info struct. These update removes passing the family arg to all these routines. Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26cpupower: Condense pstate enabled bit checks in decode_pstates()Nathan Fontenot1-3/+3
The enabled bit (bit 63) is common for all families so we can remove the multiple enabled checks based on family and have a common check for HW pstate enabled. Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26cpupower: Update family checks when decoding HW pstatesNathan Fontenot3-5/+10
The family checks in get_cof() and get_did() need to use the correct MSR format depending on the family. Add a cpupower capability for using the pstatedef (family 17h and newer) to control this instead of direct family checks. Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26cpupower: Remove unused pscur variable.Nathan Fontenot1-8/+1
The pscur variable is set but not uused, just remove it. This may have previsously been set to validate the MSR_AMD_PSTATE_STATUS MSR. With the addition of the CPUPOWER_CAP_AMD_HW_PSTATE cap flag this is no longer needed since the cpuid bit to enable this cap flag also validates that the MSR_AMD_PSTATE_STATUS MSR is present. Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flagNathan Fontenot3-8/+14
Add a check in get_cpu_info() for the ability to read frequencies from hardware and set the CPUPOWER_CAP_AMD_HW_PSTATE cpuid flag. The cpuid flag is set when CPUID_80000007_EDX[7] is set, which is all families >= 10h. The check excludes family 14h because HW pstate reporting was not implemented on family 14h. This is intended to reduce family checks in the main code paths. Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Reviewed-by: skhan@linuxfoundation.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26cpupower: Correct macro name for CPB caps flagRobert Richter3-3/+3
The name is Core Performance Boost (CPB) for the cpuid flag. Correct cpuid caps flag to use this name (instead of CBP). Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26cpupower: Update msr_pstate union struct namingNathan Fontenot1-12/+14
The msr_pstate union struct named fam17h_bits is misleading since this is the struct to use for all families >= 0x17, not just for family 0x17. Rename the bits structs to be 'pstate' (for pre family 17h CPUs) and 'pstatedef' (for CPUs since fam 17h) to align closer with PPR/BDKG (1) naming. There are no functional changes as part of this update. 1: AMD Processor Programming Reference (PPR) and BIOS and Kernel Developer's Guide (BKDG) available at: http://developer.amd.com/resources/developer-guides-manuals Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Reviewed-by: skhan@linuxfoundation.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-12-15Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds2-2/+74
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-11-16tools/power/cpupower: Read energy_perf_bias from sysfsBorislav Petkov3-32/+52
... instead of poking at the MSR. For that, move the accessor functions to misc.c and add a sysfs-writing function too. There should be no functional changes resulting from this. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Cc: Thomas Renninger <trenn@suse.com> Link: https://lkml.kernel.org/r/20201029190259.3476-2-bp@alien8.de
2020-10-26cpupower: Provide online and offline CPU informationBrahadambal Srinivasan2-1/+77
When a user tries to modify cpuidle or cpufreq properties on offline CPUs, the tool returns success (exit status 0) but also does not provide any warning message regarding offline cpus that may have been specified but left unchanged. In case of all or a few CPUs being offline, it can be difficult to keep track of which CPUs didn't get the new frequency or idle state set. Silent failures are difficult to keep track of when there are a huge number of CPUs on which the action is performed. This patch adds helper functions to find both online and offline CPUs and print them out accordingly. We use these helper functions in cpuidle-set and cpufreq-set to print an additional message if the user attempts to modify offline cpus. Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com> Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06cpupower: Fix comparing pointer to 0 coccicheck warnsShuah Khan1-3/+3
Fix cocciccheck wanrns found by: make coccicheck MODE=report M=tools/power/cpupower/ tools/power/cpupower/utils/helpers/bitmask.c:29:12-13: WARNING comparing pointer to 0, suggest !E tools/power/cpupower/utils/helpers/bitmask.c:29:12-13: WARNING comparing pointer to 0 tools/power/cpupower/utils/helpers/bitmask.c:43:12-13: WARNING comparing pointer to 0 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-11-05cpupower: mperf_monitor: Update cpupower to use the RDPRU instructionJanakarajan Natarajan2-0/+5
AMD Zen 2 introduces the RDPRU instruction which can be used to access some processor registers which are typically only accessible in privilege level 0. ECX specifies the register to read and EDX:EAX will contain the value read. ECX: 0 - Register MPERF 1 - Register APERF This has the added advantage of not having to use the msr module, since the userspace to kernel transitions which occur during each read_msr() might cause APERF and MPERF to go out of sync. Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166Thomas Gleixner3-6/+3
Based on 1 normalized pattern(s): licensed under the terms of the gnu gpl license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 62 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-23Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds4-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed based on the AMD Zen architecture, and are built and sold in China, for domestic datacenter use. The code is pretty close to AMD support, mostly with a few quirks and enumeration differences. (Pu Wen) - Enable CPUID support on Cyrix 6x86/6x86L processors" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/cpupower: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support ACPI: Add Hygon Dhyana support x86/xen: Add Hygon Dhyana support to Xen x86/kvm: Add Hygon Dhyana support to KVM x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/apic: Add Hygon Dhyana support x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/amd_nb: Check vendor in AMD-only functions x86/alternative: Init ideal_nops for Hygon Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu: Create Hygon Dhyana architecture support file x86/CPU: Change query logic so CPUID is enabled before testing x86/CPU: Use correct macros for Cyrix calls
2018-10-08cpupower: Fix coredump on VMWarePrarit Bhargava1-0/+5
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR (0xC0010064 + state number) set to zero. As a result fid and did are zero and the crash occurs because of a divide by zero (cof = fid/did). This can be prevented by checking the enable bit in the PStateDef MSR before calculating cof. By doing this the value of pstate[i] remains zero and the value can be tested before displaying the active Pstates. Check the enable bit in the PstateDef register for all supported families and only print out enabled Pstates. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-08cpupower: Fix AMD Family 0x17 msr_pstate sizePrarit Bhargava1-1/+1
The msr_pstate data is only 63 bits long and should be 64 bits. Add in the missing bit from res1 for AMD Family 0x17. Reference: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf, page 138. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-04tools/cpupower: Add Hygon Dhyana supportPu Wen4-7/+9
The tool cpupower is useful to get CPU frequency information and monitor power stats on the Hygon Dhyana platform. So add Hygon Dhyana support to it by checking vendor and family to share the code path of AMD family 17h. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> CC: Prarit Bhargava <prarit@redhat.com> CC: Shuah Khan <shuah@kernel.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Thomas Renninger <trenn@suse.com> CC: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman8-0/+8
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-31tools/power/cpupower: allow running without cpu0Prarit Bhargava3-5/+6
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0, allowing systems to offline cpu0. But when cpu0 is offline, cpupower monitor will not display all processor and Mperf information: [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Idle_Stats CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.00| 0.00| 0.00| 0.00| 0.90| 0.00| 96.13 1| 0.00| 0.00| 5.49| 0.00| 0.01| 0.00| 92.26 5| 0.00| 0.00| 0.00| 0.00| 0.46| 0.00| 99.50 2| 45.42| 0.00| 0.00| 0.00| 22.94| 0.00| 28.84 6| 0.00| 37.54| 0.00| 0.00| 0.00| 0.00| 0.00 3| 0.00| 0.00| 0.00| 0.00| 0.30| 0.00| 91.99 7| 0.00| 0.00| 0.00| 0.00| 4.70| 0.00| 0.70 This patch replaces the hard-coded use of cpu0 in cpupower with the current cpu, allowing it to run without a cpu0. After the patch is applied, [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Nehalem || Mperf || Idle_Stats CPU | C3 | C6 | PC3 | PC6 || C0 | Cx | Freq || POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.01| 1.27| 0.00| 0.00|| 0.04| 99.96| 3957|| 0.00| 0.00| 0.00| 0.00| 1.43| 0.00| 98.52 1| 0.00| 98.82| 0.00| 0.00|| 0.05| 99.95| 3361|| 0.00| 0.00| 0.01| 0.00| 0.03| 0.00| 99.88 5| 0.00| 98.82| 0.00| 0.00|| 0.09| 99.91| 3917|| 0.00| 0.00| 0.00| 0.00| 99.38| 0.00| 0.50 2| 0.33| 0.00| 0.00| 0.00|| 0.00|100.00| 3890|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00|100.00 6| 0.33| 0.00| 0.00| 0.00|| 0.01| 99.99| 3903|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 99.99 3| 0.01| 0.71| 0.00| 0.00|| 0.06| 99.94| 3678|| 0.00| 0.00| 0.00| 0.00| 0.80| 0.00| 99.13 7| 0.01| 0.71| 0.00| 0.00|| 0.03| 99.97| 3538|| 0.00| 0.69| 11.70| 0.00| 0.00| 0.00| 87.57 There are some minor cleanups included in this patch. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpupower: Add support for new AMD family 0x17Sherry Hurwitz3-11/+44
Add support for new AMD family 0x17 - Add bit field changes to the msr_pstate structure - Add the new formula for the calculation of cof - Changed method to access to CpbDis Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Acked-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpupower: Fix bug where return value was not usedSherry Hurwitz1-3/+2
Save return value from amd_pci_get_num_boost_states and remove redundant setting of *support Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13cpupower: Fix turbo frequency reporting for pre-Sandy Bridge coresBen Hutchings1-0/+1
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com> References: https://bugs.debian.org/859978 Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-28cpupower: Add cpuidle parts into libraryThomas Renninger2-130/+3
This more or less is a renaming and moving of functions and should not introduce any functional change. cpupower was built from cpufrequtils (which had a C library providing easy access to cpu frequency platform info). In the meantime it got enhanced by quite some neat cpuidle userspace tools. Now the cpu idle functions have been separated and added to the cpupower.so library. So beside an already existing public header file: cpufreq.h cpupower now also exports these cpu idle functions in: cpuidle.h Here again pasted for better review of the interfaces: ====================================== int cpuidle_is_state_disabled(unsigned int cpu, unsigned int idlestate); int cpuidle_state_disable(unsigned int cpu, unsigned int idlestate, unsigned int disable); unsigned long cpuidle_state_latency(unsigned int cpu, unsigned int idlestate); unsigned long cpuidle_state_usage(unsigned int cpu, unsigned int idlestate); unsigned long long cpuidle_state_time(unsigned int cpu, unsigned int idlestate); char *cpuidle_state_name(unsigned int cpu, unsigned int idlestate); char *cpuidle_state_desc(unsigned int cpu, unsigned int idlestate); unsigned int cpuidle_state_count(unsigned int cpu); char *cpuidle_get_governor(void); char *cpuidle_get_driver(void); ====================================== Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: Fix precedence issueThomas Renninger1-1/+1
Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02cpupower: cpupower monitor reports uninitialized values for offline cpusJacob Tanenbaum1-8/+15
[root@hp-dl980g7-02 linux]# cpupower monitor ... 5472| 0| 1|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 10567| 0| 159|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 1661206560|859272560| 150|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 1661206560|943093104| 140|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline because of this cpupower also holds the incorrect value for the number of physical packages in the machine Changed cpupower to initialize the values of an offline cpu's socket and core to -1, warn the user that one or more cpus is/are offline and not print statistics for offline cpus. This fix hides offlined cores where topology cannot be accessed. With a recent kernel patch suggested from Prarit Bhargava it may be possible that soft offlined cores' topology can still be parsed. This patch would then show which cores in which package/socket are offline, when sane toplogoy information is available. Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29tools: cpupower: Fix error when running cpupower monitorShreyas B. Prabhu1-0/+2
get_cpu_topology() tries to get topology info from all cpus by reading files in the topology sysfs dir. If a cpu is offlined, since it doesn't have topology dir, this function fails and returns -1. This causes functions relying on get_cpu_topology() to fail. For example- $ cpupower monitor Cannot read number of available processors Fix this by skipping fetching topology info for offline cpus. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reported-by: Pavaman Subramaniyam <pavsubra@linux.vnet.ibm.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-15cpupower: fix breakage from libpci API changeLucas Stach1-2/+9
libpci 3.3.0 introduced an additional member in the pci_filter struct which needs to be initialized to -1 to get the same behavior as before the API change. The libpci internal helpers got updated accordingly, but as the cpupower pci helpers initialized the struct themselves the behavior changed. Use the libpci helper pci_filter_init() to fix this and guard against similar breakages in the future. This fixes probing of the AMD fam12h/14h cpuidle monitor on systems with libpci >= 3.3.0. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-19tools / cpupower: Fix no idle state information return valuePrarit Bhargava1-1/+1
sysfs_get_idlestate_count() returns an unsigned int. Returning -ENODEV is not the right thing to do here, and in any case is handled the same way as if there are no states found. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-19PM / tools: cpupower: drop negativity check on unsigned valueAndrey Utkin1-1/+1
Link: https://bugzilla.kernel.org/show_bug.cgi?id=80621 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-25tools: cpupower: fix wrong err msg not supported vs not availableThomas Renninger1-2/+2
idlestates in sysfs are counted from 0. This fixes a wrong error message. Current behavior on a machine with 4 sleep states is: cpupower idle-set -e 4 Idlestate 4 enabled on CPU 0 -----Wrong--------------------- cpupower idle-set -e 5 Idlestate enabling not supported by kernel -----Must and now will be ----- cpupower idle-set -e 5 Idlestate 6 not available on CPU 0 ------------------------------- cpupower idle-set -e 6 Idlestate 6 not available on CPU 0 Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05cpupower: Implement disabling of cstate interfaceThomas Renninger2-1/+123
Latest kernel allows to disable C-states via: /sys/devices/system/cpu/cpuX/cpuidle/stateY/disable This patch provides lower level sysfs access functions to make use of this interface. A later patch will implement the higher level stuff. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05cpupower: Make idlestate usage unsignedThomas Renninger2-2/+2
Use unsigned int as the data type for some variables related to CPU idle states which allows the code to be simplified slightly. [rjw: Changelog] Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower: IvyBridge (0x3a and 0x3e models) supportThomas Renninger1-0/+2
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower: Provide -c param for cpupower monitor to schedule process on all coresThomas Renninger1-0/+1
If an MSR based monitor is run in parallel this is not needed. This is the default case on all/most Intel machines. But when only sysfs info is read via cpupower monitor -m Idle_Stats (typically the case for non root users) or when other monitors are PCI based (AMD), Idle_Stats, read from sysfs can be totally bogus: cpupower monitor -m Idle_Stats PKG |CORE|CPU | POLL | C1-N | C3-N | C6-N 0| 0| 0| 0.00| 0.00| 0.24| 99.81 0| 0| 32| 0.00| 0.00| 0.00| 100.7 ... 0| 17| 20| 0.00| 0.00| 0.00| 173.1 0| 17| 52| 0.00| 0.00| 0.07| 173.0 0| 18| 68| 0.00| 0.00| 0.00| 0.00 0| 18| 76| 0.00| 0.00| 0.00| 0.00 ... With the -c option all cores are woken up and the kernel did update cpuidle statistics before reading out sysfs. This causes some overhead. Therefore avoid if possible, use if needed: cpupower monitor -c -m Idle_Stats PKG |CORE|CPU | POLL | C1-N | C3-N | C6-N 0| 0| 0| 0.00| 0.00| 0.00| 100.2 0| 0| 32| 0.00| 0.00| 0.00| 100.2 ... 0| 8| 8| 0.00| 0.00| 0.00| 99.82 0| 8| 40| 0.00| 0.00| 0.00| 99.81 0| 9| 24| 0.00| 0.00| 0.00| 100.3 0| 9| 56| 0.00| 0.00| 0.00| 100.2 0| 16| 4| 0.00| 0.00| 0.00| 99.75 0| 16| 36| 0.00| 0.00| 0.00| 99.38 ... Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Fix warning and a bug with the cpu package countPalmer Cox1-5/+13
The pkgs member of cpupower_topology is being used as the number of cpu packages. As the comment in get_cpu_topology notes, the package ids are not guaranteed to be contiguous. So, simply setting pkgs to the value of the highest physical_package_id doesn't actually provide a count of the number of cpu packages. Instead, calculate pkgs by setting it to the number of distinct physical_packge_id values which is pretty easy to do after the core_info structs are sorted. Calculating pkgs this way also has the nice benefit of getting rid of a sign comparison warning that GCC 4.6 was reporting. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Fix malloc of cpu_info structurePalmer Cox2-19/+12
The cpu_info member of cpupower_topology was being declared as an unnamed structure. This member was then being malloced using the size of the parent cpupower_topology * the number of cpus. This works because cpu_info is smaller than cpupower_topology. However, there is no guarantee that will always be the case. Making cpu_info its own top level structure (named cpuid_core_info) allows for mallocing the actual size of this structure. This also lets us get rid of a redefinition of the structure in topology.c with slightly different field names. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Fix issues with sysfs_topology_read_filePalmer Cox1-8/+13
Fix a variety of issues with sysfs_topology_read_file: * The return value of sysfs_topology_read_file function was not properly being checked for failure. * The function was reading int valued sysfs variables and then returning their value. So, even if a function was trying to check the return value of this function, a caller would not be able to tell an failure code apart from reading a negative value. This also conflicted with the comment on the function which said that a return value of 0 indicated success. * The function was parsing int valued sysfs values with strtoul instead of strtol. * The function was non-static even though it was only used in the file it was declared in. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.