aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/ui/browsers/hists.c
AgeCommit message (Collapse)AuthorFilesLines
2024-08-14perf annotate: Display the branch counter histogramKan Liang1-1/+2
Display the branch counter histogram in the annotation view. Press 'B' to display the branch counter's abbreviation list as well. Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }', 4000 Hz, Event count (approx.): f3 /home/sdp/test/tchain_edit [Percent: local period] Percent │ IPC Cycle Branch Counter (Average IPC: 1.39, IPC Coverage: 29.4%) │ 0000000000401755 <f3>: 0.00 0.00 │ endbr64 │ push %rbp │ mov %rsp,%rbp │ movl $0x0,-0x4(%rbp) 0.00 0.00 │1.33 3 |A |- | ↓ jmp 25 11.03 11.03 │ 11: mov -0x4(%rbp),%eax │ and $0x1,%eax │ test %eax,%eax 17.13 17.13 │2.41 1 |A |- | ↓ je 21 │ addl $0x1,-0x4(%rbp) 21.84 21.84 │2.22 2 |AA |- | ↓ jmp 25 17.13 17.13 │ 21: addl $0x1,-0x4(%rbp) 21.84 21.84 │ 25: cmpl $0x270f,-0x4(%rbp) 11.03 11.03 │0.61 3 |A |- | ↑ jle 11 │ nop │ pop %rbp 0.00 0.00 │0.24 20 |AA |B | ← ret Originally-by: Tinghao Zhang <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Signed-off-by: Kan Liang <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-08-14perf report: Display the branch counter histogramKan Liang1-1/+16
Reusing the existing --total-cycles option to display the branch counters. Add a new PERF_HPP_REPORT__BLOCK_BRANCH_COUNTER to display the logged branch counter events. They are shown right after all the cycle-related annotations. Extend the 'struct block_info' to store and pass the branch counter related information. The annotation_br_cntr_entry() is to print the histogram of each branch counter event. If the number of logged events is less than 4, the exact number of the abbr name is printed. Otherwise, using '+' to stands for more than 3 events. Assume the number of logged events is less than 4. The annotation_br_cntr_abbr_list() prints the branch counter's abbreviation list. Press 'B' to display the list in the TUI mode. $ perf record -e "{branch-instructions:ppp,branch-misses}:S" -j any,counter $ perf report --total-cycles --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }' # Event count (approx.): 1610046 # # Branch counter abbr list: # branch-instructions:ppp = A # branch-misses = B # '-' No event occurs # '+' Event occurrences may be lost due to branch counter saturated # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles Branch Counter [Program Block Range] # ............... .............. ........... .......... .............. .................. # 57.55% 2.5M 0.00% 3 |A |- | ... 25.27% 1.1M 0.00% 2 |AA |- | ... 15.61% 667.2K 0.00% 1 |A |- | ... 0.16% 6.9K 0.81% 575 |A |- | ... 0.16% 6.8K 1.38% 977 |AA |- | ... 0.16% 6.8K 0.04% 28 |AA |B | ... 0.15% 6.6K 1.33% 946 |A |- | ... 0.11% 4.5K 0.06% 46 |AAA+|- | ... 0.10% 4.4K 0.88% 624 |A |- | ... 0.09% 3.7K 0.74% 524 |AAA+|B | ... With -v applied, # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles Branch Counter [Program Block Range] # ............... .............. ........... .......... .............. .................. # 57.55% 2.5M 0.00% 3 A=1 ,B=- ... 25.27% 1.1M 0.00% 2 A=2 ,B=- ... 15.61% 667.2K 0.00% 1 A=1 ,B=- ... 0.16% 6.9K 0.81% 575 A=1 ,B=- ... 0.16% 6.8K 1.38% 977 A=2 ,B=- ... 0.16% 6.8K 0.04% 28 A=2 ,B=1 ... 0.15% 6.6K 1.33% 946 A=1 ,B=- ... 0.11% 4.5K 0.06% 46 A=3+,B=- ... 0.10% 4.4K 0.88% 624 A=1 ,B=- ... 0.09% 3.7K 0.74% 524 A=3+,B=1 ... Reviewed-by: Andi Kleen <[email protected]> Signed-off-by: Kan Liang <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-05-06perf dso: Add reference count checking and accessor functionsIan Rogers1-4/+4
Add reference count checking to struct dso, this can help with implementing correct reference counting discipline. To avoid RC_CHK_ACCESS everywhere, add accessor functions for the variables in struct dso. The majority of the change is mechanical in nature and not easy to split up. Committer testing: 'perf test' up to this patch shows no regressions. But: util/symbol.c: In function ‘dso__load_bfd_symbols’: util/symbol.c:1683:9: error: too few arguments to function ‘dso__set_adjust_symbols’ 1683 | dso__set_adjust_symbols(dso); | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from util/symbol.c:21: util/dso.h:268:20: note: declared here 268 | static inline void dso__set_adjust_symbols(struct dso *dso, bool val) | ^~~~~~~~~~~~~~~~~~~~~~~ make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: /tmp/tmp.ZWHbQftdN6/util/symbol.o] Error 1 MKDIR /tmp/tmp.ZWHbQftdN6/tests/workloads/ make[6]: *** Waiting for unfinished jobs.... This was updated: - symbols__fixup_end(&dso->symbols, false); - symbols__fixup_duplicate(&dso->symbols); - dso->adjust_symbols = 1; + symbols__fixup_end(dso__symbols(dso), false); + symbols__fixup_duplicate(dso__symbols(dso)); + dso__set_adjust_symbols(dso); But not build tested with BUILD_NONDISTRO and libbfd devel files installed (binutils-devel on fedora). Add the missing argument: symbols__fixup_end(dso__symbols(dso), false); symbols__fixup_duplicate(dso__symbols(dso)); - dso__set_adjust_symbols(dso); + dso__set_adjust_symbols(dso, true); Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ahelenia Ziemiańska <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Changbin Du <[email protected]> Cc: Chengen Du <[email protected]> Cc: Colin Ian King <[email protected]> Cc: Dima Kogan <[email protected]> Cc: Ilkka Koskinen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Yanteng Si <[email protected]> Cc: zhaimingbing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-04-12perf report: Add a menu item to annotate data type in TUINamhyung Kim1-0/+31
When the hist entry has the type info, it should be able to display the annotation browser for the type like in `perf annotate --data-type`. Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-01-04perf TUI: Don't ignore job controlAhelenia Ziemiańska1-0/+2
In its infinite wisdom, by default, SLang sets susp undef, and this can only be un-done by calling SLtty_set_suspend_state(true). After every SLang_init_tty(). Additionally, no provisions are made for maintaining the teletype attributes across suspend/continue (outside of curses emulation mode(?!), which provides full support, naturally), so we need to save and restore the flags ourselves, as well as reset the text colours when going under. We need to also re-draw the screen, and raising SIGWINCH, shockingly, Just Works. The correct solution would be to Not Use SLang, but as a stop-gap, this makes TUI 'perf report' usable. Signed-off-by: Ahelenia Ziemiańska <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: yaowenbin <[email protected]> Link: https://lore.kernel.org/r/0354dcae23a8713f75f4fed609e0caec3c6e3cd5.1672174189.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-12-07perf ui/browser/annotate: Use global annotation_optionsNamhyung Kim1-22/+12
Now it can use the global options and no need save local browser options separately. Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-10-12perf hists browser: Avoid potential NULL dereferenceIan Rogers1-1/+1
On other code paths browser->he_selection is NULL checked, add a missing case reported by clang-tidy. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Huacai Chen <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kan Liang <[email protected]> Cc: [email protected] Cc: Ming Wang <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-10-12perf hists browser: Reorder variables to reduce paddingIan Rogers1-2/+2
Address clang-tidy warning: ``` tools/perf/ui/browsers/hists.c:2416:8: warning: Excessive padding in 'struct popup_action' (8 padding bytes, where 0 is optimal). Optimal fields order: time, thread, evsel, fn, ms, socket, rstype, ``` Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Huacai Chen <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kan Liang <[email protected]> Cc: [email protected] Cc: Ming Wang <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-08-03perf hists browser: Fix the number of entries for 'e' keyNamhyung Kim1-34/+24
The 'e' key is to toggle expand/collapse the selected entry only. But the current code has a bug that it only increases the number of entries by 1 in the hierarchy mode so users cannot move under the current entry after the key stroke. This is due to a wrong assumption in the hist_entry__set_folding(). The commit b33f922651011eff ("perf hists browser: Put hist_entry folding logic into single function") factored out the code, but actually it should be handled separately. The hist_browser__set_folding() is to update fold state for each entry so it needs to traverse all (child) entries regardless of the current fold state. So it increases the number of entries by 1. But the hist_entry__set_folding() only cares the currently selected entry and its all children. So it should count all unfolded child entries. This code is implemented in hist_browser__toggle_fold() already so we can just call it. Fixes: b33f922651011eff ("perf hists browser: Put hist_entry folding logic into single function") Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-03perf hists browser: Fix hierarchy mode headerNamhyung Kim1-1/+1
The commit ef9ff6017e3c4593 ("perf ui browser: Move the extra title lines from the hists browser") introduced ui_browser__gotorc_title() to help moving non-title lines easily. But it missed to update the title for the hierarchy mode so it won't print the header line on TUI at all. $ perf report --hierarchy Fixes: ef9ff6017e3c4593 ("perf ui browser: Move the extra title lines from the hists browser") Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-06-12perf thread: Add accessor functions for threadIan Rogers1-9/+10
Using accessors will make it easier to add reference count checking in later patches. Committer notes: thread->nsinfo wasn't wrapped as it is used together with nsinfo__zput(), where does a trick to set the field with a refcount being dropped to NULL, and that doesn't work well with using thread__nsinfo(thread), that loses the &thread->nsinfo pointer. When refcount checking is added to 'struct thread', later in this series, nsinfo__zput(RC_CHK_ACCESS(thread)->nsinfo) will be used to check the thread pointer. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ali Saidi <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Brian Robbins <[email protected]> Cc: Changbin Du <[email protected]> Cc: Dmitrii Dolgov <[email protected]> Cc: Fangrui Song <[email protected]> Cc: German Gomez <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ivan Babrou <[email protected]> Cc: James Clark <[email protected]> Cc: Jing Zhang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Miguel Ojeda <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Steinar H. Gunderson <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: Wenyu Liu <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yang Jihong <[email protected]> Cc: Ye Xingchen <[email protected]> Cc: Yuan Can <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-04-19perf dso: Fix use before NULL check introduced by map__dso() introductionArnaldo Carvalho de Melo1-2/+2
James Clark noticed that the recent 63df0e4bc368adbd ("perf map: Add accessor for dso") patch accessed map->dso before the 'map' variable was NULL checked, which is a change in logic that leads to segmentation faults, so comb thru that patch to fix similar cases. Fixes: 63df0e4bc368adbd ("perf map: Add accessor for dso") Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected] Cc: Suzuki Poulouse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-04-10perf util: Move input_name to utilIan Rogers1-1/+1
'input_name' is the name of the input perf.data file, it is used by data convert and ui code. Move it to util to make it more consistent with other global state. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chengdong Li <[email protected]> Cc: Denis Nikitin <[email protected]> Cc: Florian Fischer <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Raul Silvera <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rob Herring <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: Will Deacon <[email protected]> Cc: Xing Zhengjun <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-04-04perf map: Add accessor for dsoIan Rogers1-7/+10
Later changes will add reference count checking for struct map, with dso being the most frequently accessed variable. Add an accessor so that the reference count check is only necessary in one place. Additional changes: - add a dso variable to avoid repeated map__dso calls. - in builtin-mem.c dump_raw_samples, code only partially tested for dso == NULL. Make the possibility of NULL consistent. - in thread.c thread__memcpy fix use of spaces and use tabs. Committer notes: Did missing conversions on these files: tools/perf/arch/powerpc/util/skip-callchain-idx.c tools/perf/arch/powerpc/util/sym-handling.c tools/perf/ui/browsers/hists.c tools/perf/ui/gtk/annotate.c tools/perf/util/cs-etm.c tools/perf/util/thread.c tools/perf/util/unwind-libunwind-local.c tools/perf/util/unwind-libunwind.c Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Bayduraev <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Darren Hart <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Dmitriy Vyukov <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: German Gomez <[email protected]> Cc: Hao Luo <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Miaoqian Lin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Shunsuke Nakamura <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Stephen Brennan <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yury Norov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-04-04perf maps: Add functions to access mapsIan Rogers1-1/+2
Introduce functions to access struct maps. These functions reduce the number of places reference counting is necessary. While tidying APIs do some small const-ification, in particlar to unwind_libunwind_ops. Committer notes: Fixed up tools/perf/util/unwind-libunwind.c: - return ops->get_entries(cb, arg, thread, data, max_stack); + return ops->get_entries(cb, arg, thread, data, max_stack, best_effort); Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Bayduraev <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Darren Hart <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Dmitriy Vyukov <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: German Gomez <[email protected]> Cc: Hao Luo <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Miaoqian Lin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Shunsuke Nakamura <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Stephen Brennan <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yury Norov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-04-29perf hists: Split hists_stats from events_statsNamhyung Kim1-8/+9
Each struct hists have events_stats but most of the fields were not used. It's to count number of samples and periods whether filtered or not. And other fields are used only by evlist. So it'd be better to split hists_stats and events_stats to reduce wasted memory in the struct hists. This makes the output of event statistics in the perf report compact by skipping 0 events in each evsel/hists. Reviewed-by: Andi Kleen <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-03-23perf tools: Fix various typos in commentsIngo Molnar1-1/+1
Fix ~124 single-word typos and a few spelling errors in the perf tooling code, accumulated over the years. Signed-off-by: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-30perf evlist: Use the right prefix for 'struct evlist' event selection methodsArnaldo Carvalho de Melo1-1/+1
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-30perf evlist: Use the right prefix for 'struct evlist' evsel list methodsArnaldo Carvalho de Melo1-2/+2
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-30perf evlist: Use the right prefix for 'struct evlist' browser methodsArnaldo Carvalho de Melo1-17/+8
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-30perf evlist: Use the right prefix for 'struct evlist' 'toggle' methodsArnaldo Carvalho de Melo1-1/+1
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-30perf evsel: Convert last 'struct evsel' methods to the right evsel__ prefixArnaldo Carvalho de Melo1-18/+10
As 'perf_evsel__' means its a function in tools/lib/perf/. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-03perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()Song Liu1-1/+1
Making perf with gcc-9.1.1 generates the following warning: CC ui/browsers/hists.o ui/browsers/hists.c: In function 'perf_evsel__hists_browse': ui/browsers/hists.c:3078:61: error: '%d' directive output may be \ truncated writing between 1 and 11 bytes into a region of size \ between 2 and 12 [-Werror=format-truncation=] 3078 | "Max event group index to sort is %d (index from 0 to %d)", | ^~ ui/browsers/hists.c:3078:7: note: directive argument in the range [-2147483648, 8] 3078 | "Max event group index to sort is %d (index from 0 to %d)", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/stdio.h:937, from ui/browsers/hists.c:5: IOW, the string in line 3078 might be too long for buf[] of 64 bytes. Fix this by increasing the size of buf[] to 128. Fixes: dbddf1747441 ("perf report/top TUI: Support hotkeys to let user select any event for sorting") Signed-off-by: Song Liu <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Jin Yao <[email protected]> Cc: [email protected] # v5.7+ Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-09-01perf top/report: Fix infinite loop in the TUI for grouped eventsArnaldo Carvalho de Melo1-1/+2
For a while we need to have a dummy event for doing things like receiving PERF_RECORD_COMM, PERF_RECORD_EXEC, etc for threads being created and dying while we synthesize the pre-existing ones at tool start. This 'dummy' event is needed for keeping track of thread lifetime events early in the session but are uninteresting otherwise, i.e. no need to have it in a initial events menu for the non-grouped case, i.e. for: # perf top -e cycles,instructions or even for plain: # perf top When 'cycles' and that 'dummy' event are in place. The code to remove that 'dummy' event ended up creating an endless loop for the grouped case, i.e.: # perf top -e '{cycles,instructions}' Fix it. Fixes: bee9ca1c8a237ca1 ("perf report TUI: Remove needless 'dummy' event from menu") Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-07-06perf report TUI: Remove needless 'dummy' event from menuArnaldo Carvalho de Melo1-1/+18
Fixing the common case of: perf record perf report And getting just the cycles events. We now have a 'dummy' event to get perf metadata events that take place while we synthesize metadata records for pre-existing processes by traversing procfs, so we always have this extra 'dummy' evsel, but we don't have to offer it as there will be no samples on it, remove this distraction. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-07-06perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()Wei Li1-6/+11
The segmentation fault can be reproduced as following steps: 1) Executing perf report in tui. 2) Typing '/xxxxx' to filter the symbol to get nothing matched. 3) Pressing enter with no entry selected. Then it will report a segmentation fault. It is caused by the lack of check of browser->he_selection when accessing it's member res_samples in perf_evsel__hists_browse(). These processes are meaningful for specified samples, so we can skip these when nothing is selected. Fixes: 4968ac8fb7c3 ("perf report: Implement browsing of individual samples") Signed-off-by: Wei Li <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: Jin Yao <[email protected]> Cc: Mark Rutland <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-05-05perf evsel: Rename perf_evsel__{prev,next}() to evsel__{prev,next}()Arnaldo Carvalho de Melo1-2/+2
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-05-05perf evsel: Rename perf_evsel__is_*() to evsel__is*()Arnaldo Carvalho de Melo1-3/+3
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-05-05perf evsel: Rename *perf_evsel__*name() to *evsel__*name()Arnaldo Carvalho de Melo1-4/+4
As they are 'struct evsel' methods or related routines, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf report/top TUI: Fix title line formattingArnaldo Carvalho de Melo1-4/+4
In d10ec006dcd7 ("perf hists browser: Allow passing an initial hotkey") the hist_entry__title() call was cut'n'pasted to a function where the 'title' variable is a pointer, not an array, so the sizeof(title) continues syntactically valid but ends up reducing the real size of the buffer where to format the first line in the screen to 8 bytes, which makes the formatting at the title at each refresh to produce just the string "Samples ", duh, fix it by passing the size of the buffer. Cc: Adrian Hunter <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Fixes: d10ec006dcd7 ("perf hists browser: Allow passing an initial hotkey") Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-24perf report/top TUI: Support hotkeys to let user select any event for sortingJin Yao1-1/+27
When performing "perf report --group", it shows the event group information together. In previous patch, we have supported a new option "--group-sort-idx" to sort the output by the event at the index n in event group. It would be nice if we can use a hotkey in browser to select a event to sort. For example, # perf report --group Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ... Overhead Command Shared Object Symbol 92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1 3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515 1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7 1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce 1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair 0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single 0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle 0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check 0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt 0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] check_preempt_curr When user press hotkey '3' (event index, starting from 0), it indicates to sort output by the forth event in group. Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ... Overhead Command Shared Object Symbol 92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1 0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle 3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515 0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns 1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7 0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se v6: --- Jiri provided a good improvement to eliminate unneeded refresh. This improvement is added to v6. v2: --- 1. Report warning at helpline when index is invalid. 2. Report warning at helpline when it's not group event. 3. Use "case '0' ... '9'" to refine the code 4. Split K_RELOAD implementation to another patch. Signed-off-by: Jin Yao <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-24perf report: Support a new key to reload the browserJin Yao1-0/+1
Sometimes we may need to reload the browser to update the output since some options are changed. This patch creates a new key K_RELOAD. Once the __cmd_report() returns K_RELOAD, it would repeat the whole process, such as, read samples from data file, sort the data and display in the browser. v5: --- 1. Fix the 'make NO_SLANG=1' error. Define K_RELOAD in util/hist.h. 2. Skip setup_sorting() in repeat path if last key is K_RELOAD. v4: --- Need to quit in perf_evsel_menu__run if key is K_RELOAD. Signed-off-by: Jin Yao <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-24perf report/top TUI: Support hotkey 'a' for annotation of unresolved addressesJin Yao1-11/+35
In previous patch, we have supported the annotation functionality even without symbols. For this patch, it supports the hotkey 'a' on address in report view. Note that, for branch mode, we only support the annotation for "branch to" address. Signed-off-by: Jin Yao <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-24perf report: Support interactive annotation of code without symbolsJin Yao1-6/+37
For perf report on stripped binaries it is currently impossible to do annotation. The annotation state is all tied to symbols, but there are either no symbols, or symbols are not covering all the code. We should support the annotation functionality even without symbols. This patch fakes a symbol and the symbol name is the string of address. After that, we just follow current annotation working flow. For example, 1. perf report Overhead Command Shared Object Symbol 20.67% div libc-2.27.so [.] __random_r 17.29% div libc-2.27.so [.] __random 10.59% div div [.] 0x0000000000000628 9.25% div div [.] 0x0000000000000612 6.11% div div [.] 0x0000000000000645 2. Select the line of "10.59% div div [.] 0x0000000000000628" and ENTER. Annotate 0x0000000000000628 Zoom into div thread Zoom into div DSO (use the 'k' hotkey to zoom directly into the kernel) Browse map details Run scripts for samples of symbol [0x0000000000000628] Run scripts for all samples Switch to another data file in PWD Exit 3. Select the "Annotate 0x0000000000000628" and ENTER. Percent│ │ │ │ Disassembly of section .text: │ │ 0000000000000628 <.text+0x68>: │ divsd %xmm4,%xmm0 │ divsd %xmm3,%xmm1 │ movsd (%rsp),%xmm2 │ addsd %xmm1,%xmm0 │ addsd %xmm2,%xmm0 │ movsd %xmm0,(%rsp) Now we can see the dump of object starting from 0x628. v5: --- Remove the hotkey 'a' implementation from this patch. It will be moved to a separate patch. v4: --- 1. Support the hotkey 'a'. When we press 'a' on address, now it supports the annotation. 2. Change the patch title from "Support interactive annotation of code without symbols" to "perf report: Support interactive annotation of code without symbols" v3: --- Keep just the ANNOTATION_DUMMY_LEN, and remove the opts->annotate_dummy_len since it's the "maybe in future we will provide" feature. v2: --- Fix a crash issue when annotating an address in "unknown" object. The steps to reproduce this issue: perf record -e cycles:u ls perf report 75.29% ls ld-2.27.so [.] do_lookup_x 23.64% ls ld-2.27.so [.] __GI___tunables_init 1.04% ls [unknown] [k] 0xffffffff85c01210 0.03% ls ld-2.27.so [.] _start When annotating 0xffffffff85c01210, the crash happens. v2 adds checking for ms->map in add_annotate_opt(). If the object is "unknown", ms->map is NULL. Committer notes: Renamed new_annotate_sym() to symbol__new_unresolved(). Use PRIx64 to fix this issue in some 32-bit arches: ui/browsers/hists.c: In function 'symbol__new_unresolved': ui/browsers/hists.c:2474:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=] snprintf(name, sizeof(name), "%-#.*lx", BITS_PER_LONG / 4, addr); ~~~~~~^ ~~~~ %-#.*llx Signed-off-by: Jin Yao <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Ravi Bangoria <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf report/top: Make 'e' visible in the help and make it toggle showing ↵Arnaldo Carvalho de Melo1-1/+7
callchains The 'e' and 'c' hotkeys were present for a long time, but not documented in the help window, change 'e' to be a toggle so that it gets consistent with other toggles like '+' and document it in the help window. Keep 'c' as is for people used to it but don't document, as it is easier to just use 'e' to show/hide all the callchains for a top level histogram entry. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf report/top: Do not offer annotation for symbols without samplesArnaldo Carvalho de Melo1-1/+10
This can happen in the --children mode, i.e. the default mode when callchains are present, where one of the main entries may be a callchain entry with no samples. So far we were not providing any information about why an annotation couldn't be provided even offering the Annotation option in the popup menu. Work is needed to allow for no-samples "annotation', i.e. to show the disassembly anyway and allow for navigation, etc. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf report/top: Allow pressing hotkeys in the options popup menuArnaldo Carvalho de Melo1-6/+10
When the users presses ENTER in the main 'perf report/top' screen a popup menu is presented, in it some hotkeys are suggested as alternatives to using the menu, or for additional features. At that point the user may try those hotkeys, so allow for that by recording the key used and exiting, the caller then can check for that possibility and process the hotkey. I.e. try pressing ENTER, and then 'k' to exit and zoom into the kernel map, using ESC then zooms out, etc. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06tools ui popup: Allow returning hotkeysArnaldo Carvalho de Melo1-2/+2
With this patch if an optional pointer is passed to ui__popup_menu() then when any key that is not being handled (ENTER, ESC, etc) is typed, it'll record that key in the pointer and return, allowing for hotkey processing on the caller. If NULL is passed, no change in logic, unhandled keys continue to be ignored. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf hists browser: Allow passing an initial hotkeyArnaldo Carvalho de Melo1-74/+79
Sometimes we're in an outer code, like the main hists browser popup menu and the user follows a suggestion about using some hotkey, and that hotkey is really handled by hists_browser__run(), so allow for calling it with that hotkey, making it handle it instead of waiting for the user to press one. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf report/top: Add 'k' hotkey to zoom directly into the kernel mapArnaldo Carvalho de Melo1-1/+8
As a convenience, equivalent to pressing Enter in a line with a kernel symbol and then selecting "Zoom" into the kernel DSO. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf hists browser: Generalize the do_zoom_dso() functionArnaldo Carvalho de Melo1-4/+7
We'll use it to provide a top level hotkey to zoom into the kernel dso directly. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf report/top: Improve toggle callchain menu optionArnaldo Carvalho de Melo1-3/+51
Taking into account the current status of the callchain, i.e. if folded, show "Expand", otherwise "Collapse", also show the name of the entry that will be affected and mention the hotkeys for expanding/collapsing all callchains below the main entry, the one that appears with/without callchains. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf report/top: Add menu entry for toggling callchain expansionArnaldo Carvalho de Melo1-0/+21
Since previously pressing ENTER toggled expansion/collapse of callchain entries and now brings up the same menu used when callchains are not present, add an entry so that users can quickly figure out the change in behaviour. Its worth mentioning that we also always had 'e'/'c' to expand/collapse all entries in a hist entry and 'E'/'C' for all hist entries. Suggested-by: Linus Torvalds <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf report/top: Make ENTER consistently bring up menuArnaldo Carvalho de Melo1-1/+2
When callchains are present the ENTER key switches from bringing up the menu that offers Annotation, Zoom by DSO, etc to expanding/collapsing one callchain level, causing confusion, fix it by making it consistently bring up the menu and use '+' to expand/collapse one callchain level. Next patch will also add an entry to the menu to allow expanding/collapsing, so that people used to ENTER expanding one callchain level can quickly find it and use it instead. Reported-by: Linus Torvalds <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-01-06perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etcArnaldo Carvalho de Melo1-0/+1
We need to set actions->ms.map since 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions"), as in that patch we bail out if map is NULL. Reviewed-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Namhyung Kim <[email protected]> Fixes: 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions") Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-19perf report: Jump to symbol source view from total cycles viewJin Yao1-2/+23
This patch supports jumping from tui total cycles view to symbol source view. For example, perf record -b ./div perf report --total-cycles In total cycles view, we can select one entry and press 'a' or press ENTER key to jump to symbol source view. This patch also sets sort_order to NULL in cmd_report() which will use the default branch sort order. The percent value in new annotate view will be consistent with the percent in annotate view switched from perf report (we observed the original percent gap with previous patches). v2: --- Fix the 'make NO_SLANG=1' error. (set __maybe_unused to annotation_opts in block_hists_tui_browse()). Signed-off-by: Jin Yao <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-19perf util: Move block TUI function to ui browsersJin Yao1-0/+55
It would be nice if we could jump to the assembler/source view (like the normal perf report) from total cycles view. This patch moves the block_hists_tui_browse from block-info.c to ui/browsers/hists.c in order to reuse some browser codes (i.e do_annotate) for implementing new annotation view. v2: --- Fix the 'make NO_SLANG=1' error. (Change 'int block_hists_tui_browse()' to 'static inline int block_hists_tui_browse()') Signed-off-by: Jin Yao <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-12pref tools: Make 'struct addr_map_symbol' contain 'struct map_symbol'Arnaldo Carvalho de Melo1-12/+8
So that we pass that substructure around and with it consolidate lots of functions that receive a (map, symbol) pair and now can receive just a 'struct map_symbol' pointer. This further paves the way to add 'struct map_groups' to 'struct map_symbol' so that we can have all we need for annotation so that we can ditch 'struct map'->groups, i.e. have the map_groups pointer in a more central place, avoiding the pointer in the 'struct map' that have tons of instances. Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-11-07perf report: Sort by sampled cycles percent per block for tuiJin Yao1-1/+6
Previous patch has implemented a new option "--total-cycles". But only stdio mode is supported. This patch supports the tui mode and support '--percent-limit'. For example, perf record -b ./div perf report --total-cycles --percent-limit 1 # Samples: 2753248 of event 'cycles' Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object 26.04% 2.8M 0.40% 18 [div.c:42 -> div.c:39] div 15.17% 1.2M 0.16% 7 [random_r.c:357 -> random_r.c:380] libc-2.27.so 5.11% 402.0K 0.04% 2 [div.c:27 -> div.c:28] div 4.87% 381.6K 0.04% 2 [random.c:288 -> random.c:291] libc-2.27.so 4.53% 381.0K 0.04% 2 [div.c:40 -> div.c:40] div 3.85% 300.9K 0.02% 1 [div.c:22 -> div.c:25] div 3.08% 241.1K 0.02% 1 [rand.c:26 -> rand.c:27] libc-2.27.so 3.06% 240.0K 0.02% 1 [random.c:291 -> random.c:291] libc-2.27.so 2.78% 215.7K 0.02% 1 [random.c:298 -> random.c:298] libc-2.27.so 2.52% 198.3K 0.02% 1 [random.c:293 -> random.c:293] libc-2.27.so 2.36% 184.8K 0.02% 1 [rand.c:28 -> rand.c:28] libc-2.27.so 2.33% 180.5K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so 2.28% 176.7K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so 2.20% 168.8K 0.02% 1 [rand@plt+0 -> rand@plt+0] div 1.98% 158.2K 0.02% 1 [random_r.c:388 -> random_r.c:388] libc-2.27.so 1.57% 123.3K 0.02% 1 [div.c:42 -> div.c:44] div 1.44% 116.0K 0.42% 19 [random_r.c:357 -> random_r.c:394] libc-2.27.so -------------------------------------------------- v7: --- 1. Since we have used use_browser in report__browse_block_hists to support stdio mode, now we also add supporting for tui. 2. Move block tui browser code from ui/browsers/hists.c to block-info.c. v6: --- Create report__tui_browse_block_hists in block-info.c (codes are moved from builtin-report.c). v5: --- Fix a crash issue when running perf report without '--total-cycles'. The issue is because the internal flag is renamed from 'total_cycles' to 'total_cycles_mode' in previous patch but this patch still uses 'total_cycles' to check if the '--total-cycles' option is enabled, which causes the code to be inconsistent. v4: --- Since the block collection is moved out of printing in previous patch, this patch is updated accordingly for tui supporting. v3: --- Minor change since the function name is changed: block_total_cycles_percent -> block_info__total_cycles_percent Signed-off-by: Jin Yao <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-09-25libperf: Add perf_evlist__first()/last() functionsJiri Olsa1-3/+3
Add perf_evlist__first()/last() functions to libperf, as internal functions and rename perf's origins to evlist__first/last. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.