| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
instruction on powerpc
Use the raw instruction code and macros to identify memory instructions,
extract register fields and also offset.
The implementation addresses the D-form, X-form, DS-form instructions.
Adds "mem_ref" field to check whether source/target has memory
reference.
Add function "get_powerpc_regs" which will set these fields: reg1, reg2,
offset depending of where it is source or target ops.
Update "parse" callback for "struct ins_ops" to also pass "struct
disasm_line" as argument. This is needed in parse functions where opcode
is used to determine whether to set multi_regs and other fields
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently, the perf tool infrastructure uses the disasm_line__parse
function to parse disassembled line.
Example snippet from objdump:
objdump --start-address=<address> --stop-address=<address> -d --no-show-raw-insn -C <vmlinux>
c0000000010224b4: lwz r10,0(r9)
This line "lwz r10,0(r9)" is parsed to extract instruction name,
registers names and offset.
In powerpc, the approach for data type profiling uses raw instruction
instead of result from objdump to identify the instruction category and
extract the source/target registers.
Example: 38 01 81 e8 ld r4,312(r1)
Here "38 01 81 e8" is the raw instruction representation. Add function
"disasm_line__parse_powerpc" to handle parsing of raw instruction.
Also update "struct disasm_line" to save the binary code/
With the change, function captures:
line -> "38 01 81 e8 ld r4,312(r1)"
raw instruction "38 01 81 e8"
Raw instruction is used later to extract the reg/offset fields. Macros
are added to extract opcode and register fields. "struct disasm_line"
is updated to carry union of "bytes" and "raw_insn" of 32 bit to carry raw
code (raw).
Function "disasm_line__parse_powerpc fills the raw instruction hex value
and can use macros to get opcode. There is no changes in existing code
paths, which parses the disassembled code. The size of raw instruction
depends on architecture.
In case of powerpc, the parsing the disasm line needs to handle cases
for reading binary code directly from DSO as well as parsing the objdump
result. Hence adding the logic into separate function instead of
updating "disasm_line__parse". The architecture using the instruction
name and present approach is not altered. Since this approach targets
powerpc, the macro implementation is added for powerpc as of now.
Since the disasm_line__parse is used in other cases (perf annotate) and
not only data tye profiling, the powerpc callback includes changes to
work with binary code as well as mnemonic representation.
Also in case if the DSO read fails and libcapstone is not supported, the
approach fallback to use objdump as option. Hence as option, patch has
changes to ensure objdump option also works well.
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
[ Add check for strndup() result ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.
Fixes: ee756ef7491e ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Make the util directory into its own library. This is done to avoid
compiling code twice, once for the perf tool and once for the perf
python module. For convenience:
arch/common.c
scripts/perl/Perf-Trace-Util/Context.c
scripts/python/Perf-Trace-Util/Context.c
are made part of this library.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Every architecture can provide a register list for sampling. If an
architecture doesn't support register sampling, it won't define the data
structure 'sample_reg_masks'. Consequently, any code using this
structure must be protected by the macro 'HAVE_PERF_REGS_SUPPORT'.
This patch defines a weak function, arch__sample_reg_masks(), which will
be replaced by an architecture-defined function for returning the
architecture's register list. With this refactoring, the function always
exists, the condition checking for 'HAVE_PERF_REGS_SUPPORT' is not
needed anymore, so remove it.
Signed-off-by: Leo Yan <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Ming Wang <[email protected]>
Cc: John Garry <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Updates to struct parse_events_error needed to be carried through to
PowerPC specific event parsing.
Fixes: fd7b8e8fb20f ("perf parse-events: Print all errors")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung <[email protected]>
Cc: James Clark <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Kan Liang <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
For some ARCHs, e.g., ARM and AMD, to get the availability of the
mem-events, perf checks the existence of a specific PMU. For the other
ARCHs, e.g., Intel and Power, perf has to check the existence of some
specific events.
The current perf only iterates the mem-events-supported PMUs. It's not
required to check the existence of a specific PMU anymore.
Rename sysfs_name to event_name, which stores the specific mem-events.
Perf only needs to check those events for the availability of the
mem-events.
Rename perf_mem_event__supported to perf_pmu__mem_events_supported.
Reviewed-by: Ian Rogers <[email protected]>
Tested-by: Ravi Bangoria <[email protected]>
Tested-by: Leo Yan <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Introduce a generic perf_mem_events__name(). Remove the ARCH-specific
one.
The mem_load events may have a different format. Add ldlat and aux_event
in the struct perf_mem_event to indicate the format and the extra aux
event.
Add perf_mem_events_intel_aux[] to support the extra mem_load_aux event.
Rename perf_mem_events__name to perf_pmu__mem_events_name.
Reviewed-by: Ian Rogers <[email protected]>
Tested-by: Ravi Bangoria <[email protected]>
Tested-by: Leo Yan <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Simple expression parser test fails in powerpc as below:
4: Simple expression parser
test child forked, pid 170385
Using CPUID 004e2102
division by zero
syntax error
syntax error
FAILED tests/expr.c:65 parse test failed
test child finished with -1
Simple expression parser: FAILED!
This is observed after commit:
'commit 9d5da30e4ae9 ("perf jevents: Add a new expression builtin strcmp_cpuid_str()")'
With this commit, a new expression builtin strcmp_cpuid_str
got added. This function takes an 'ID' type value, which is
a string. So expression parse for strcmp_cpuid_str expects
const char * as cpuid value type. In case of powerpc, CPU IDs
are numbers. Hence it doesn't get interpreted correctly by
bison parser. Example in case of power9, cpuid string returns
as: 004e2102
cpuid of string type is expected in two cases:
1. char *get_cpuid_str(struct perf_pmu *pmu __maybe_unused);
Testcase "tests/expr.c" uses "perf_pmu__getcpuid" which calls
get_cpuid_str to get the cpuid string.
2. cpuid field in :struct pmu_events_map
struct pmu_events_map {
const char *arch;
const char *cpuid;
Here cpuid field is used in "perf_pmu__find_events_table"
function as "strcmp_cpuid_str(map->cpuid, cpuid)". The
value for cpuid field is picked from mapfile.csv.
Fix the mapfile.csv and get_cpuid_str function to prefix
cpuid with 0x so that it gets correctly interpreted by
the bison parser
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Disha Goel<[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
The PMU name could be NULL in the case of the fake_pmu. Initialize the
name for the fake_pmu to "fake" so that all other logic can assume it
is initialized. Add a const to the type of name so that a literal can
be used to avoid additional initialization code. Propagate the cost
through related routines and remove now unnecessary "(char *)"
casts. Doing this located a bug in builtin-list for the pmu_glob that
was missing a strdup.
Signed-off-by: Ian Rogers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: K Prateek Nayak <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: James Clark <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Wei Li <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: [email protected]
Cc: Ming Wang <[email protected]>
Cc: John Garry <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
util/perf_regs.h includes another perf_regs.h:
#include <perf_regs.h>
Here it includes architecture specific header, for example, if we build
arm64 target, the header tools/perf/arch/arm64/include/perf_regs.h is
included.
We use this implicit way to include architecture specific header, which
is not directive; furthermore, util/perf_regs.c is coupled with the
architecture specific definitions.
This patch moves out arch specific header from util/perf_regs.h for
generalizing the 'util' folder, as a result, the source files in 'arch'
folder explicitly include architecture's perf_regs.h.
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Eric Lin <[email protected]>
Cc: Fangrui Song <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Babrou <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Ming Wang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The macros PERF_REGS_MAX and PERF_REGS_MASK are architecture specific,
let's remove them from the common file util/perf_regs.c.
As a side effect, the weak functions arch__intr_reg_mask() and
arch__user_reg_mask() just return zeros, every arch defines its own
functions in the 'arch' folder for returning right values.
Note, we don't need to return intr/user register masks dynamically, this
is because these two functions are invoked during recording phase but
not decoding phase, they are always invoked on the native environment,
thus we don't need to parse them dynamically.
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Eric Lin <[email protected]>
Cc: Fangrui Song <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Babrou <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Ming Wang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
arch_skip_callchain_idx function
'perf record; with callchain recording fails as below
in powerpc:
./perf record -a -gR sleep 10
./perf report
perf: Segmentation fault
gdb trace points to thread__find_map
0 0x00000000101df314 in atomic_cmpxchg (newval=1818846826, oldval=1818846827, v=0x1001a8f3) at /home/athira/linux/tools/include/asm-generic/atomic-gcc.h:70
1 refcount_sub_and_test (i=1, r=0x1001a8f3) at /home/athira/linux/tools/include/linux/refcount.h:135
2 refcount_dec_and_test (r=0x1001a8f3) at /home/athira/linux/tools/include/linux/refcount.h:148
3 map__put (map=0x1001a8b3) at util/map.c:311
4 0x000000001016842c in __map__zput (map=0x7fffffffa368) at util/map.h:190
5 thread__find_map (thread=0x105b92f0, cpumode=<optimized out>, addr=13835058055283572736, al=al@entry=0x7fffffffa358) at util/event.c:582
6 0x000000001016882c in thread__find_symbol (thread=<optimized out>, cpumode=<optimized out>, addr=<optimized out>, al=0x7fffffffa358) at util/event.c:656
7 0x00000000102e12b4 in arch_skip_callchain_idx (thread=<optimized out>, chain=<optimized out>) at arch/powerpc/util/skip-callchain-idx.c:255
8 0x00000000101d3bf4 in thread__resolve_callchain_sample (thread=0x105b92f0, cursor=0x1053d160, evsel=<optimized out>, sample=0x7fffffffa908, parent=0x7fffffffa778, root_al=0x7fffffffa710,
max_stack=<optimized out>) at util/machine.c:2940
9 0x00000000101cd210 in sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=<optimized out>, evsel=<optimized out>, al=<optimized out>, max_stack=<optimized out>)
at util/callchain.c:1112
10 0x000000001022a9d8 in hist_entry_iter__add (iter=0x7fffffffa750, al=0x7fffffffa710, max_stack_depth=<optimized out>, arg=0x7fffffffbbd0) at util/hist.c:1232
11 0x0000000010056d98 in process_sample_event (tool=0x7fffffffbbd0, event=0x7ffff6223c38, sample=0x7fffffffa908, evsel=<optimized out>, machine=0x10524ef8) at builtin-report.c:332
Here arch_skip_callchain_idx calls thread__find_symbol and which
invokes thread__find_map with uninitialised "addr_location".
Snippet:
thread__find_symbol(thread, PERF_RECORD_MISC_USER, ip, &al);
Recent change with commit 0dd5041c9a0eaf8c ("perf addr_location: Add
init/exit/copy functions") , introduced "maps__zput" in the function
thread__find_map. This could result in segfault while accessing
uninitialised map from "struct addr_location". Fix this by adding
addr_location__init and addr_location__exit in arch_skip_callchain_idx.
Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions")
Reported-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf_pmus__have_event()
Missed function rename from pmu_have_event to perf_pmus__have_event made
the perf build fail on powerpc.
Committer notes:
The perf_pmus__have_event() is declared in util/pmus.h, so use it
instead of by now needless util/pmu.h.
Fixes: 1eaf496ed386934f ("perf pmu: Separate pmu and pmus")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
equal to a given string
This makes the logic a bit clear by avoiding the !strcmp() pattern and
also a way to intercept the pointer if we need to do extra validation on
it or to do lazy setting of evsel->name via evsel__name(evsel).
Reviewed-by: "Liang, Kan" <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Later changes will add reference count checking for struct map, add a
helper function to invoke the map_ip and unmap_ip function pointers. The
helper allows the reference count check to be in fewer places.
Committer notes:
Add missing conversions to:
tools/perf/util/map.c
tools/perf/util/cs-etm.c
tools/perf/util/annotate.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/arch/s390/annotate/instructions.c
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Later changes will add reference count checking for struct map, start
and end are frequently accessed variables. Add an accessor so that the
reference count check is only necessary in one place.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Later changes will add reference count checking for struct map, with
dso being the most frequently accessed variable. Add an accessor so
that the reference count check is only necessary in one place.
Additional changes:
- add a dso variable to avoid repeated map__dso calls.
- in builtin-mem.c dump_raw_samples, code only partially tested for
dso == NULL. Make the possibility of NULL consistent.
- in thread.c thread__memcpy fix use of spaces and use tabs.
Committer notes:
Did missing conversions on these files:
tools/perf/arch/powerpc/util/skip-callchain-idx.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/ui/browsers/hists.c
tools/perf/ui/gtk/annotate.c
tools/perf/util/cs-etm.c
tools/perf/util/thread.c
tools/perf/util/unwind-libunwind-local.c
tools/perf/util/unwind-libunwind.c
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The variable 'decode_str_len' defines the string length for KVM event
name and every arch defines its own values.
This introduces complexity that the variable definition are spreading in
multiple source files under arch folder. This patch refactors code to
use a macro KVM_EVENT_NAME_LEN to define event name length and thus
remove the definitions in arch files.
Signed-off-by: Leo Yan <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Rather than use a string to encode aggr_mode, use an enum value.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Create a new pmu_metric for the metric related variables from pmu_event
but that is initially just a clone of pmu_event. Add iterators for
pmu_metric and use in places that metrics are desired rather than
events. Make the event iterator skip metric only events, and the metric
iterator skip event only events.
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Kajol Jain <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kang Minchul <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Athira Rajeev <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
disentangle headers
Some places were including event.h just to get 'struct perf_sample',
move it to a separate place so that we speed up a bit the build.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now the generic code can handle kallsyms fixup properly so no need to
keep the arch-functions anymore.
Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Update the arch_support_sort_key() function in powerpc to enable
presenting local and global variants of sort key 'p_stage_cyc'.
Update the "se_header" strings for these in arch_perf_header_entry()
along with instruction latency.
Reported-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Jajeev <[email protected]>
Tested-by: Nageswara R Sastry <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
parse_events() may succeed but leave string memory allocations reachable
in the error.
Add an init/exit that must be called to initialize and clean up the
error. This fixes a leak in metricgroup parse_ids.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Group error functions and name after the data type they manipulate.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Got following build fail on powerpc:
CC arch/powerpc/util/skip-callchain-idx.o
In function ‘check_return_reg’,
inlined from ‘check_return_addr’ at arch/powerpc/util/skip-callchain-idx.c:213:7,
inlined from ‘arch_skip_callchain_idx’ at arch/powerpc/util/skip-callchain-idx.c:265:7:
arch/powerpc/util/skip-callchain-idx.c:54:18: error: ‘dwarf_frame_register’ accessing 96 bytes \
in a region of size 64 [-Werror=stringop-overflow=]
54 | result = dwarf_frame_register(frame, ra_regno, ops_mem, &ops, &nops);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/util/skip-callchain-idx.c: In function ‘arch_skip_callchain_idx’:
arch/powerpc/util/skip-callchain-idx.c:54:18: note: referencing argument 3 of type ‘Dwarf_Op *’
In file included from /usr/include/elfutils/libdwfl.h:32,
from arch/powerpc/util/skip-callchain-idx.c:10:
/usr/include/elfutils/libdw.h:1069:12: note: in a call to function ‘dwarf_frame_register’
1069 | extern int dwarf_frame_register (Dwarf_Frame *frame, int regno,
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The dwarf_frame_register args changed with [1],
Updating ops_mem accordingly.
[1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=5621fe5443da23112170235dd5cac161e5c75e65
Reviewed-by: Kajol Jain <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Mark Wieelard <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
as part of extended regs
This patch enables presenting Sampled Instruction Address Register
(SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended
registers for the perf tool.
Add these SPR's to sample_reg_mask in the tool side (to use with -I?
option).
Reviewed-by: Kajol Jain <[email protected]>
Signed-off-by: Athira Jajeev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nageswara R Sastry <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make lookup nature of data structures clearer through their type. Reduce
scope of architecture specific pmu_event tables by making them static.
Suggested-by: John Garry <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Andi Kleen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Antonov <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrew Kilroy <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Denys Zagorui <[email protected]>
Cc: Fabian Hemmer <[email protected]>
Cc: Felix Fietkau <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jacob Keller <[email protected]>
Cc: Jiapeng Chong <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Joakim Zhang <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicholas Fraser <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Sami Tolvanen <[email protected]>
Cc: ShihCheng Tu <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Wan Jiabing <[email protected]>
Cc: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf_mem_events__name() can generate the mem-load event name.
It uses a variable 'mem_loads_name__init' to avoid generating the
event name every time (because perf_pmu__scan takes some time).
The perf_mem_events__name() assumes the pmu is "cpu" but it's not
correct for hybrid platform. For Alderlake, the pmu is "cpu_core" or
"cpu_atom"
Introduce a new parameter 'pmu_name' in perf_mem_events__name
to let the caller specify a pmu name.
Considering such event name is x86 specific, so move
perf_mem_events[] to arch/x86/util/mem-events.c.
We still keep the variable 'mem_loads_name__init' but it's only
used when pmu_name is NULL (compatible for original behavior). When
pmu_name is not NULL (e.g. "cpu_core"), this patch doesn't have
optimization. That can be implemented in follow up patch.
Signed-off-by: Jin Yao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The sort dimension "p_stage_cyc" is used to represent pipeline
stage cycle information. Presently, this is used only in powerpc.
For unsupported platforms, we don't want to display it
in the perf report output columns. Hence add check in sort_dimension__add()
and skip the sort key incase it is not applicable for the particular arch.
Signed-off-by: Athira Rajeev <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The pipeline stage cycles details can be recorded on powerpc from the
contents of Performance Monitor Unit (PMU) registers. On ISA v3.1
platform, sampling registers exposes the cycles spent in different
pipeline stages. Patch adds perf tools support to present two of the
cycle counter information along with memory latency (weight).
Re-use the field 'ins_lat' for storing the first pipeline stage cycle.
This is stored in 'var2_w' field of 'perf_sample_weight'.
Add a new field 'p_stage_cyc' to store the second pipeline stage cycle
which is stored in 'var3_w' field of perf_sample_weight.
Add new sort function 'Pipeline Stage Cycle' and include this in
default_mem_sort_order[]. This new sort function may be used to denote
some other pipeline stage in another architecture. So add this to list
of sort entries that can have dynamic header string.
Signed-off-by: Athira Rajeev <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add arch specific arch_evsel__set_sample_weight() to set the new
sample type for powerpc.
Add arch specific arch_perf_parse_sample_weight() to store the
sample->weight values depending on the sample type applied.
if the new sample type (PERF_SAMPLE_WEIGHT_STRUCT) is applied,
store only the lower 32 bits to sample->weight. If sample type
is 'PERF_SAMPLE_WEIGHT', store the full 64-bit to sample->weight.
Signed-off-by: Athira Rajeev <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix ~124 single-word typos and a few spelling errors in the perf tooling code,
accumulated over the years.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need to use "%#" PRIx64 for u64 values, not "%lx", fixing this build
problem on powerpc 32-bit:
72 13.69 ubuntu:18.04-x-powerpc : FAIL powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
arch/powerpc/util/machine.c: In function 'arch__symbols__fixup_end':
arch/powerpc/util/machine.c:23:12: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'u64 {aka long long unsigned int}' [-Werror=format=]
pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
^
/git/linux/tools/perf/util/debug.h:18:21: note: in definition of macro 'pr_fmt'
#define pr_fmt(fmt) fmt
^~~
/git/linux/tools/perf/util/debug.h:33:29: note: in expansion of macro 'pr_debugN'
#define pr_debug4(fmt, ...) pr_debugN(4, pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~
/git/linux/tools/perf/util/debug.h:33:42: note: in expansion of macro 'pr_fmt'
#define pr_debug4(fmt, ...) pr_debugN(4, pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~
arch/powerpc/util/machine.c:23:2: note: in expansion of macro 'pr_debug4'
pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
^~~~~~~~~
cc1: all warnings being treated as errors
/git/linux/tools/build/Makefile.build:139: recipe for target 'util' failed
make[5]: *** [util] Error 2
/git/linux/tools/build/Makefile.build:139: recipe for target 'powerpc' failed
make[4]: *** [powerpc] Error 2
/git/linux/tools/build/Makefile.build:139: recipe for target 'arch' failed
make[3]: *** [arch] Error 2
73 30.47 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
Fixes: 557c3eadb7712741 ("perf powerpc: Fix gap between kernel end and module start")
Cc: Athira Rajeev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
extended regs
To enable presenting of Performance Monitor Counter Registers (PMC1 to
PMC6) as part of extended regsiters, this patch adds these to
sample_reg_mask in the tool side (to use with -I? option).
Simplified the PERF_REG_PMU_MASK_300/31 definition. Excluded the
unsupported SPRs (MMCR3, SIER2, SIER3) from extended mask value for
CPU_FTR_ARCH_300.
Signed-off-by: Athira Jajeev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running "perf mem report" in TUI mode fails with ENOMEM message in
powerpc:
failed to process sample
Running with debug and verbose options points that issue is while
allocating memory for sample histograms.
The error path is:
symbol__inc_addr_samples() ->
__symbol__inc_addr_samples() ->
annotated_source__histogram()
symbol__inc_addr_samples() calls annotated_source__alloc_histograms ()
to allocate memory for sample histograms using calloc(). Here calloc()
fails since the size of symbol is huge. The size of a symbol is
calculated as difference between its start and end address.
Example histogram allocation that fails is:
sym->name is _end
sym->start is 0xc0000000027a0000
sym->end is 0xc008000003890000
symbol__size(sym) is 0x80000010f0000
In the above case, the difference between sym->start
(0xc0000000027a0000) and sym->end (0xc008000003890000) is huge.
This is same problem as in s390 and arm64 which are fixed in commits:
b9c0a64901d5 ("perf annotate: Fix s390 gap between kernel end and module start")
78886f3ed37e ("perf symbols: Fix arm64 gap between kernel start and module end")
When this symbol was read first, its start and end address was set to
address which matches with data from /proc/kallsyms.
After symbol__new():
symbol__new: _end 0xc0000000027a0000-0xc0000000027a0000
From /proc/kallsyms:
...
c000000002799370 b backtrace_flag
c000000002799378 B radix_tree_node_cachep
c000000002799380 B __bss_stop
c0000000027a0000 B _end
c008000003890000 t icmp_checkentry [ip_tables]
c008000003890038 t ipt_alloc_initial_table [ip_tables]
c008000003890468 T ipt_do_table [ip_tables]
c008000003890de8 T ipt_unregister_table_pre_exit [ip_tables]
...
Perf calls function symbols__fixup_end() which sets the end of symbol to
0xc008000003890000, which is the next address and this is the start
address of first module (icmp_checkentry in above) which will make the
huge symbol size of 0x80000010f0000.
After symbols__fixup_end:
symbols__fixup_end: sym->name: _end
sym->start: 0xc0000000027a0000
sym->end: 0xc008000003890000
On powerpc, kernel text segment is located at 0xc000000000000000 whereas
the modules are located at very high memory addresses,
0xc00800000xxxxxxx. Since the gap between end of kernel text segment and
beginning of first module's address is high, histogram allocation using
calloc fails.
Fix this by detecting the kernel's last symbol and limiting the range of
last kernel symbol to pagesize.
Signed-off-by: Athira Rajeev<[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-By: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
arch_get_runtimeparam()
This patch adds passing of pmu_event as a parameter in function
'arch_get_runtimeparam' which can be used to get details like if the
event is percore/perchip.
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"New features:
- Introduce controlling how 'perf stat' and 'perf record' works via a
control file descriptor, allowing starting with events configured
but disabled until commands are received via the control file
descriptor. This allows, for instance for tools such as Intel VTune
to make further use of perf as its Linux platform driver.
- Improve 'perf record' to to register in a perf.data file header the
clockid used to help later correlate things like syslog files and
perf events recorded.
- Add basic syscall and find_next_bit benchmarks to 'perf bench'.
- Allow using computed metrics in calculating other metrics. For
instance:
{
.metric_expr = "l2_rqsts.demand_data_rd_hit + l2_rqsts.pf_hit + l2_rqsts.rfo_hit",
.metric_name = "DCache_L2_All_Hits",
},
{
.metric_expr = "max(l2_rqsts.all_demand_data_rd - l2_rqsts.demand_data_rd_hit, 0) + l2_rqsts.pf_miss + l2_rqsts.rfo_miss",
.metric_name = "DCache_L2_All_Miss",
},
{
.metric_expr = "dcache_l2_all_hits + dcache_l2_all_miss",
.metric_name = "DCache_L2_All",
}
- Add suport for 'd_ratio', '>' and '<' operators to the expression
resolver used in calculating metrics in 'perf stat'.
Support for new kernel features:
- Support TEXT_POKE and KSYMBOL_TYPE_OOL perf metadata events to cope
with things like ftrace, trampolines, i.e. changes in the kernel
text that gets in the way of properly decoding Intel PT hardware
traces, for instance.
Intel PT:
- Add various knobs to reduce the volume of Intel PT traces by
reducing the level of details such as decoding just some types of
packets (e.g., FUP/TIP, PSB+), also filtering by time range.
- Add new itrace options (log flags to the 'd' option, error flags to
the 'e' one, etc), controlling how Intel PT is transformed into
perf events, document some missing options (e.g., how to synthesize
callchains).
BPF:
- Properly report BPF errors when parsing events.
- Do not setup side-band events if LIBBPF is not linked, fixing a
segfault.
Libraries:
- Improvements to the libtraceevent plugin mechanism.
- Improve libtracevent support for KVM trace events SVM exit reasons.
- Add a libtracevent plugins for decoding syscalls/sys_enter_futex
and for tlb_flush.
- Ensure sample_period is set libpfm4 events in 'perf test'.
- Fixup libperf namespacing, to make sure what is in libperf has the
perf_ namespace while what is now only in tools/perf/ doesn't use
that prefix.
Arch specific:
- Improve the testing of vendor events and metrics in 'perf test'.
- Allow no ARM CoreSight hardware tracer sink to be specified on
command line.
- Fix arm_spe_x recording when mixed with other perf events.
- Add s390 idle functions 'psw_idle' and 'psw_idle_exit' to list of
idle symbols.
- List kernel supplied event aliases for arm64 in 'perf list'.
- Add support for extended register capability in PowerPC 9 and 10.
- Added nest IMC power9 metric events.
Miscellaneous:
- No need to setup sample_regs_intr/sample_regs_user for dummy
events.
- Update various copies of kernel headers, some causing perf to
handle new syscalls, MSRs, etc.
- Improve usage of flex and yacc, enabling warnings and addressing
the fallout.
- Add missing '--output' option to 'perf kmem' so that it can pass it
along to 'perf record'.
- 'perf probe' fixes related to adding multiple probes on the same
address for the same event.
- Make 'perf probe' warn if the target function is a GNU indirect
function.
- Remove //anon mmap events from 'perf inject jit' to fix supporting
both using ELF files for generated functions and the perf-PID.map
approaches"
* tag 'perf-tools-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (144 commits)
perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set
perf tools powerpc: Add support for extended regs in power10
perf tools powerpc: Add support for extended register capability
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: update linux/in.h copy
tools headers API: Update close_range affected files
perf script: Add 'tod' field to display time of day
perf script: Change the 'enum perf_output_field' enumerators to be 64 bits
perf data: Add support to store time of day in CTF data conversion
perf tools: Move clockid_res_ns under clock struct
perf header: Store clock references for -k/--clockid option
perf tools: Add clockid_name function
perf clockid: Move parse_clockid() to new clockid object
tools lib traceevent: Handle possible strdup() error in tep_add_plugin_path() API
libtraceevent: Fixed description of tep_add_plugin_path() API
libtraceevent: Fixed type in PRINT_FMT_STING
libtraceevent: Fixed broken indentation in parse_ip4_print_args()
libtraceevent: Improve error handling of tep_plugin_add_option() API
...
|
|
Added support for supported regs which are new in power10 ( MMCR3,
SIER2, SIER3 ) to sample_reg_mask in the tool side to use with `-I?`
option. Also added PVR check to send extended mask for power10 at kernel
while capturing extended regs in each sample.
Signed-off-by: Athira Jajeev <[email protected]>
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Ravi Bangoria <[email protected]>
Tested-by: Ravi Bangoria <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michael Neuling <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add extended regs to sample_reg_mask in the tool side to use with `-I?`
option. Perf tools side uses extended mask to display the platform
supported register names (with -I? option) to the user and also send
this mask to the kernel to capture the extended registers in each
sample. Hence decide the mask value based on the processor version.
Currently definitions for `mfspr`, `SPRN_PVR` are part of
`arch/powerpc/util/header.c`. Move this to a header file so that these
definitions can be re-used in other source files as well.
Signed-off-by: Anju T Sudhakar <[email protected]>
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
Reviewed--by: Ravi Bangoria <[email protected]>
Tested-by: Ravi Bangoria <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michael Neuling <[email protected]> <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
[Decide extended mask at run time based on platform]
Signed-off-by: Athira Jajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got
defined as H_DISABLE_AND_GETC instead.
This define was introduced with a typo in commit <b13a96cfb055>
("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was
later used without having the typo noticed.
Signed-off-by: Leonardo Bras <[email protected]>
Acked-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This is currently working due to extra include paths in the build.
Before:
$ cd tools/perf/arch/arm64/util
$ ls -la ../../util/unwind-libdw.h
ls: cannot access '../../util/unwind-libdw.h': No such file or directory
After:
$ ls -la ../../../util/unwind-libdw.h
-rw-r----- 1 irogers irogers 553 Apr 17 14:31 ../../../util/unwind-libdw.h
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 7eec00a74720 ("perf symbols: Consolidate symbol fixup issue")
removed powerpc specific sym-handling.c file from Build. This wasn't
caught by build CI because all functions in this file are declared
as __weak in common code. Fix it.
Fixes: 7eec00a74720 ("perf symbols: Consolidate symbol fixup issue")
Reported-by: Sandipan Das <[email protected]>
Signed-off-by: Ravi Bangoria <[email protected]>
Reviewed-by: Leo Yan <[email protected]>
Reviewed-by: Naveen N. Rao <[email protected]>
Acked-by: Sandipan Das <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
metehods to to evsel__*()
As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Patch enhances current metric infrastructure to handle "?" in the metric
expression. The "?" can be use for parameters whose value not known
while creating metric events and which can be replace later at runtime
to the proper value. It also add flexibility to create multiple events
out of single metric event added in JSON file.
Patch adds function 'arch_get_runtimeparam' which is a arch specific
function, returns the count of metric events need to be created. By
default it return 1.
This infrastructure needed for hv_24x7 socket/chip level events.
"hv_24x7" chip level events needs specific chip-id to which the data is
requested. Function 'arch_get_runtimeparam' implemented in header.c
which extract number of sockets from sysfs file "sockets" under
"/sys/devices/hv_24x7/interface/".
With this patch basically we are trying to create as many metric events
as define by runtime_param.
For that one loop is added in function 'metricgroup__add_metric', which
create multiple events at run time depend on return value of
'arch_get_runtimeparam' and merge that event in 'group_list'.
To achieve that we are actually passing this parameter value as part of
`expr__find_other` function and changing "?" present in metric
expression with this value.
As in our JSON file, there gonna be single metric event, and out of
which we are creating multiple events.
To understand which data count belongs to which parameter value,
we also printing param value in generic_metric function.
For example,
command:# ./perf stat -M PowerBUS_Frequency -C 0 -I 1000
1.000101867 9,356,933 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0
1.000101867 9,366,134 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1
2.000314878 9,365,868 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0
2.000314878 9,366,092 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1
So, here _0 and _1 after PowerBUS_Frequency specify parameter value.
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anju T Sudhakar <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mamatha Inamdar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
After copying Arm64's perf archive with object files and perf.data file
to x86 laptop, the x86's perf kernel symbol resolution fails. It
outputs 'unknown' for all symbols parsing.
This issue is root caused by the function elf__needs_adjust_symbols(),
x86 perf tool uses one weak version, Arm64 (and powerpc) has rewritten
their own version. elf__needs_adjust_symbols() decides if need to parse
symbols with the relative offset address; but x86 building uses the weak
function which misses to check for the elf type 'ET_DYN', so that it
cannot parse symbols in Arm DSOs due to the wrong result from
elf__needs_adjust_symbols().
The DSO parsing should not depend on any specific architecture perf
building; e.g. x86 perf tool can parse Arm and Arm64 DSOs, vice versa.
And confirmed by Naveen N. Rao that powerpc64 kernels are not being
built as ET_DYN anymore and change to ET_EXEC.
This patch removes the arch specific functions for Arm64 and powerpc and
changes elf__needs_adjust_symbols() as a common function.
In the common elf__needs_adjust_symbols(), it checks an extra condition
'ET_DYN' for elf header type. With this fixing, the Arm64 DSO can be
parsed properly with x86's perf tool.
Before:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 [unknown] ([kernel.kallsyms]) => ffff800010c4eaec [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec [unknown] ([kernel.kallsyms]) => ffff800010c4eb00 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 [unknown] ([kernel.kallsyms]) => ffff800010c4e780 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 [unknown] ([kernel.kallsyms]) => ffff800010c4eeac [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc [unknown] ([kernel.kallsyms]) => ffff800010c4ed80 [unknown] ([kernel.kallsyms])
After:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c coresight_timeout+0x54 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 coresight_timeout+0x68 ([kernel.kallsyms]) => ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms]) => ffff800010c4eb00 etm4_enable_hw+0x3e0 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 etm4_enable_hw+0x3e8 ([kernel.kallsyms]) => ffff800010c4e780 etm4_enable_hw+0x60 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 etm4_enable_hw+0x80 ([kernel.kallsyms]) => ffff800010c4eeac etm4_enable+0x2d4 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc etm4_enable+0x2e4 ([kernel.kallsyms]) => ffff800010c4ed80 etm4_enable+0x1a8 ([kernel.kallsyms])
v3: Changed to check for ET_DYN across all architectures.
v2: Fixed Arm64 and powerpc native building.
Reported-by: Mike Leach <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Reviewed-by: Naveen N. Rao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Allison Randal <[email protected]>
Cc: Enrico Weigelt <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is currently working due to extra include paths in the build.
Committer testing:
$ cd tools/include/uapi/asm/
Before this patch:
$ ls -la ../../arch/x86/include/uapi/asm/errno.h
ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory
$
After this patch;
$ ls -la ../../../arch/x86/include/uapi/asm/errno.h
-rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h
$
Check that that is still under tools/, i.e. hasn't escaped into the main
kernel sources:
$ cd ../../../arch/x86/include/uapi/asm/
$ pwd
/home/acme/git/perf/tools/arch/x86/include/uapi/asm
$
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexios Zavras <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Igor Lubashev <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wei Li <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|