| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
netfslib currently defers dropping the ref on the folios it obtains during
readahead to after it has started I/O on the basis that we can do it whilst
we wait for the I/O to complete, but this runs the risk of the I/O
collection racing with this in future.
Furthermore, Matthew Wilcox strongly suggests that the refs should be
dropped immediately, as readahead_folio() does (netfslib is using
__readahead_batch() which doesn't drop the refs).
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Suggested-by: Matthew Wilcox <[email protected]>
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Fix the netfs_folio tracepoint to handle folios that have a NULL mapping
pointer. In such a case, just substitute a zero inode number.
Fixes: c38f4e96e605 ("netfs: Provide func to copy data to pagecache for buffered write")
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Kafs wants to be able to cache the contents of directories (and symlinks),
but whilst these are downloaded from the server with the FS.FetchData RPC
op and similar, the same as for regular files, they can't be updated by
FS.StoreData, but rather have special operations (FS.MakeDir, etc.).
Now, rather than redownloading a directory's content after each change made
to that directory, kafs modifies the local blob. This blob can be saved
out to the cache, and since it's using netfslib, kafs just marks the folios
dirty and lets ->writepages() on the directory take care of it, as for an
regular file.
This is fine as long as there's a cache as although the upload stream is
disabled, there's a cache stream to drive the procedure. But if the cache
goes away in the meantime, suddenly there's no way do any writes and the
code gets confused, complains "R=%x: No submit" to dmesg and leaves the
dirty folio hanging.
Fix this by just cancelling the store of the folio if neither stream is
active. (If there's no cache at the time of dirtying, we should just not
mark the folio dirty).
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v2
Signed-off-by: Christian Brauner <[email protected]>
|
|
Improve the efficiency of buffered reads in a number of ways:
(1) Overhaul the algorithm in general so that it's a lot more compact and
split the read submission code between buffered and unbuffered
versions. The unbuffered version can be vastly simplified.
(2) Read-result collection is handed off to a work queue rather than being
done in the I/O thread. Multiple subrequests can be processes
simultaneously.
(3) When a subrequest is collected, any folios it fully spans are
collected and "spare" data on either side is donated to either the
previous or the next subrequest in the sequence.
Notes:
(*) Readahead expansion is massively slows down fio, presumably because it
causes a load of extra allocations, both folio and xarray, up front
before RPC requests can be transmitted.
(*) RDMA with cifs does appear to work, both with SIW and RXE.
(*) PG_private_2-based reading and copy-to-cache is split out into its own
file and altered to use folio_queue. Note that the copy to the cache
now creates a new write transaction against the cache and adds the
folios to be copied into it. This allows it to use part of the
writeback I/O code.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v2
Signed-off-by: Christian Brauner <[email protected]>
|
|
Use the new folio_queue structures to simplify the writeback code. The
problem with referring to the i_pages xarray directly is that we may have
gaps in the sequence of folios we're writing from that we need to skip when
we're removing the writeback mark from the folios we're writing back from.
At the moment the code tries to deal with this by carefully tracking the
gaps in each writeback stream (eg. write to server and write to cache) and
divining when there's a gap that spans folios (something that's not helped
by folios not being a consistent size).
Instead, the folio_queue buffer contains pointers only the folios we're
dealing with, has them in ascending order and indicates a gap by placing
non-consequitive folios next to each other. This makes it possible to
track where we need to clean up to by just keeping track of where we've
processed to on each stream and taking the minimum.
Note that the I/O iterator is always rounded up to the end of the folio,
even if that is beyond the EOF position, so that the cache can do DIO from
the page. The excess space is cleared, though mmapped writes clobber it.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v2
Signed-off-by: Christian Brauner <[email protected]>
|
|
Make the netfs write-side routines use the new folio_queue struct to hold a
rolling buffer of folios, with the issuer adding folios at the tail and the
collector removing them from the head as they're processed instead of using
an xarray.
This will allow a subsequent patch to simplify the write collector.
The primary mark (as tested by folioq_is_marked()) is used to note if the
corresponding folio needs putting.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v2
Signed-off-by: Christian Brauner <[email protected]>
|
|
Remove NETFS_COPY_TO_CACHE as it isn't used anymore.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v2
Signed-off-by: Christian Brauner <[email protected]>
|
|
Reserve the 0-valued netfs_sreq_source to mean unset or unknown so that it
can be seen in the trace as such rather than appearing as
download-from-server when it's going to get switched to something else.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v2
Signed-off-by: Christian Brauner <[email protected]>
|
|
Reduce the number of conditional branches in netfs_perform_write() by
merging in netfs_how_to_modify() and then creating a separate if-statement
for each way we might modify a folio. Note that this means replicating the
data copy in each path.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v2
Signed-off-by: Christian Brauner <[email protected]>
|
|
The NETFS_RREQ_USE_PGPRIV2 and NETFS_RREQ_WRITE_TO_CACHE flags aren't used
correctly. The problem is that we try to set them up in the request
initialisation, but we the cache may be in the process of setting up still,
and so the state may not be correct. Further, we secondarily sample the
cache state and make contradictory decisions later.
The issue arises because we set up the cache resources, which allows the
cache's ->prepare_read() to switch on NETFS_SREQ_COPY_TO_CACHE - which
triggers cache writing even if we didn't set the flags when allocating.
Fix this in the following way:
(1) Drop NETFS_ICTX_USE_PGPRIV2 and instead set NETFS_RREQ_USE_PGPRIV2 in
->init_request() rather than trying to juggle that in
netfs_alloc_request().
(2) Repurpose NETFS_RREQ_USE_PGPRIV2 to merely indicate that if caching is
to be done, then PG_private_2 is to be used rather than only setting
it if we decide to cache and then having netfs_rreq_unlock_folios()
set the non-PG_private_2 writeback-to-cache if it wasn't set.
(3) Split netfs_rreq_unlock_folios() into two functions, one of which
contains the deprecated code for using PG_private_2 to avoid
accidentally doing the writeback path - and always use it if
USE_PGPRIV2 is set.
(4) As NETFS_ICTX_USE_PGPRIV2 is removed, make netfs_write_begin() always
wait for PG_private_2. This function is deprecated and only used by
ceph anyway, and so label it so.
(5) Drop the NETFS_RREQ_WRITE_TO_CACHE flag and use
fscache_operation_valid() on the cache_resources instead. This has
the advantage of picking up the result of netfs_begin_cache_read() and
fscache_begin_write_operation() - which are called after the object is
initialised and will wait for the cache to come to a usable state.
Just reverting ae678317b95e[1] isn't a sufficient fix, so this need to be
applied on top of that. Without this as well, things like:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
and:
WARNING: CPU: 13 PID: 3621 at fs/ceph/caps.c:3386
may happen, along with some UAFs due to PG_private_2 not getting used to
wait on writeback completion.
Fixes: 2ff1e97587f4 ("netfs: Replace PG_fscache by setting folio->private and marking dirty")
Reported-by: Max Kellermann <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: Ilya Dryomov <[email protected]>
cc: Xiubo Li <[email protected]>
cc: Hristo Venev <[email protected]>
cc: Jeff Layton <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
second writeback flag"
This reverts commit ae678317b95e760607c7b20b97c9cd4ca9ed6e1a.
Revert the patch that removes the deprecated use of PG_private_2 in
netfslib for the moment as Ceph is actually still using this to track
data copied to the cache.
Fixes: ae678317b95e ("netfs: Remove deprecated use of PG_private_2 as a second writeback flag")
Reported-by: Max Kellermann <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: Ilya Dryomov <[email protected]>
cc: Xiubo Li <[email protected]>
cc: Jeff Layton <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
https: //lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Provide implementation of the netfslib hooks that will be used by netfslib
to ask cifs to set up and perform operations. Of particular note are
(*) cifs_clamp_length() - This is used to negotiate the size of the next
subrequest in a read request, taking into account the credit available
and the rsize. The credits are attached to the subrequest.
(*) cifs_req_issue_read() - This is used to issue a subrequest that has
been set up and clamped.
(*) cifs_prepare_write() - This prepares to fill a subrequest by picking a
channel, reopening the file and requesting credits so that we can set
the maximum size of the subrequest and also sets the maximum number of
segments if we're doing RDMA.
(*) cifs_issue_write() - This releases any unneeded credits and issues an
asynchronous data write for the contiguous slice of file covered by
the subrequest. This should possibly be folded in to all
->async_writev() ops and that called directly.
(*) cifs_begin_writeback() - This gets the cached writable handle through
which we do writeback (this does not affect writethrough, unbuffered
or direct writes).
At this point, cifs is not wired up to actually *use* netfslib; that will
be done in a subsequent patch.
Signed-off-by: David Howells <[email protected]>
cc: Steve French <[email protected]>
cc: Shyam Prasad N <[email protected]>
cc: Rohith Surabattula <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Do a couple of miscellaneous tidy ups:
(1) Add a qualifier into a file banner comment.
(2) Put the writeback folio traces back into alphabetical order.
(3) Remove some unused folio traces.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
|
|
The current netfslib writeback implementation creates writeback requests of
contiguous folio data and then separately tiles subrequests over the space
twice, once for the server and once for the cache. This creates a few
issues:
(1) Every time there's a discontiguity or a change between writing to only
one destination or writing to both, it must create a new request.
This makes it harder to do vectored writes.
(2) The folios don't have the writeback mark removed until the end of the
request - and a request could be hundreds of megabytes.
(3) In future, I want to support a larger cache granularity, which will
require aggregation of some folios that contain unmodified data (which
only need to go to the cache) and some which contain modifications
(which need to be uploaded and stored to the cache) - but, currently,
these are treated as discontiguous.
There's also a move to get everyone to use writeback_iter() to extract
writable folios from the pagecache. That said, currently writeback_iter()
has some issues that make it less than ideal:
(1) there's no way to cancel the iteration, even if you find a "temporary"
error that means the current folio and all subsequent folios are going
to fail;
(2) there's no way to filter the folios being written back - something
that will impact Ceph with it's ordered snap system;
(3) and if you get a folio you can't immediately deal with (say you need
to flush the preceding writes), you are left with a folio hanging in
the locked state for the duration, when really we should unlock it and
relock it later.
In this new implementation, I use writeback_iter() to pump folios,
progressively creating two parallel, but separate streams and cleaning up
the finished folios as the subrequests complete. Either or both streams
can contain gaps, and the subrequests in each stream can be of variable
size, don't need to align with each other and don't need to align with the
folios.
Indeed, subrequests can cross folio boundaries, may cover several folios or
a folio may be spanned by multiple folios, e.g.:
+---+---+-----+-----+---+----------+
Folios: | | | | | | |
+---+---+-----+-----+---+----------+
+------+------+ +----+----+
Upload: | | |.....| | |
+------+------+ +----+----+
+------+------+------+------+------+
Cache: | | | | | |
+------+------+------+------+------+
The progressive subrequest construction permits the algorithm to be
preparing both the next upload to the server and the next write to the
cache whilst the previous ones are already in progress. Throttling can be
applied to control the rate of production of subrequests - and, in any
case, we probably want to write them to the server in ascending order,
particularly if the file will be extended.
Content crypto can also be prepared at the same time as the subrequests and
run asynchronously, with the prepped requests being stalled until the
crypto catches up with them. This might also be useful for transport
crypto, but that happens at a lower layer, so probably would be harder to
pull off.
The algorithm is split into three parts:
(1) The issuer. This walks through the data, packaging it up, encrypting
it and creating subrequests. The part of this that generates
subrequests only deals with file positions and spans and so is usable
for DIO/unbuffered writes as well as buffered writes.
(2) The collector. This asynchronously collects completed subrequests,
unlocks folios, frees crypto buffers and performs any retries. This
runs in a work queue so that the issuer can return to the caller for
writeback (so that the VM can have its kswapd thread back) or async
writes.
(3) The retryer. This pauses the issuer, waits for all outstanding
subrequests to complete and then goes through the failed subrequests
to reissue them. This may involve reprepping them (with cifs, the
credits must be renegotiated, and a subrequest may need splitting),
and doing RMW for content crypto if there's a conflicting change on
the server.
[!] Note that some of the functions are prefixed with "new_" to avoid
clashes with existing functions. These will be renamed in a later patch
that cuts over to the new algorithm.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: Eric Van Hensbergen <[email protected]>
cc: Latchesar Ionkov <[email protected]>
cc: Dominique Martinet <[email protected]>
cc: Christian Schoenebeck <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Switch to using unsigned long long rather than loff_t in netfslib to avoid
problems with the sign flipping in the maths when we're dealing with the
byte at position 0x7fffffffffffffff.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: Ilya Dryomov <[email protected]>
cc: Xiubo Li <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Remove support for ->launder_folio() from netfslib and expect filesystems
to use filemap_invalidate_inode() instead. netfs_launder_folio() can then
be got rid of.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: Eric Van Hensbergen <[email protected]>
cc: Latchesar Ionkov <[email protected]>
cc: Dominique Martinet <[email protected]>
cc: Christian Schoenebeck <[email protected]>
cc: David Howells <[email protected]>
cc: Marc Dionne <[email protected]>
cc: Steve French <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
When dirty data is being written to the cache, setting/waiting on/clearing
the fscache flag is always done in tandem with setting/waiting on/clearing
the writeback flag. The netfslib buffered write routines wait on and set
both flags and the write request cleanup clears both flags, so the fscache
flag is almost superfluous.
The reason it isn't superfluous is because the fscache flag is also used to
indicate that data just read from the server is being written to the cache.
The flag is used to prevent a race involving overlapping direct-I/O writes
to the cache.
Change this to indicate that a page is in need of being copied to the cache
by placing a magic value in folio->private and marking the folios dirty.
Then when the writeback code sees a folio marked in this way, it only
writes it to the cache and not to the server.
If a folio that has this magic value set is modified, the value is just
replaced and the folio will then be uplodaded too.
With this, PG_fscache is no longer required by the netfslib core, 9p and
afs.
Ceph and nfs, however, still need to use the old PG_fscache-based tracking.
To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the
flags in the netfs_inode struct for those filesystems. This reenables the
use of PG_fscache in that inode. 9p and afs use the netfslib write helpers
so get switched over; cifs, for the moment, does page-by-page manual access
to the cache, so doesn't use PG_fscache and is unaffected.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: Matthew Wilcox (Oracle) <[email protected]>
cc: Eric Van Hensbergen <[email protected]>
cc: Latchesar Ionkov <[email protected]>
cc: Dominique Martinet <[email protected]>
cc: Christian Schoenebeck <[email protected]>
cc: Marc Dionne <[email protected]>
cc: Ilya Dryomov <[email protected]>
cc: Xiubo Li <[email protected]>
cc: Steve French <[email protected]>
cc: Paulo Alcantara <[email protected]>
cc: Ronnie Sahlberg <[email protected]>
cc: Shyam Prasad N <[email protected]>
cc: Tom Talpey <[email protected]>
cc: Bharath SM <[email protected]>
cc: Trond Myklebust <[email protected]>
cc: Anna Schumaker <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Provide a flag whereby a filesystem may request that cifs_perform_write()
perform write-through caching. This involves putting pages directly into
writeback rather than dirty and attaching them to a write operation as we
go.
Further, the writes being made are limited to the byte range being written
rather than whole folios being written. This can be used by cifs, for
example, to deal with strict byte-range locking.
This can't be used with content encryption as that may require expansion of
the write RPC beyond the write being made.
This doesn't affect writes via mmap - those are written back in the normal
way; similarly failed writethrough writes are marked dirty and left to
writeback to retry. Another option would be to simply invalidate them, but
the contents can be simultaneously accessed by read() and through mmap.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Provide a launder_folio implementation for netfslib.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Implement support for unbuffered writes and direct I/O writes. If the
write is misaligned with respect to the fscrypt block size, then RMW cycles
are performed if necessary. DIO writes are a special case of unbuffered
writes with extra restriction imposed, such as block size alignment
requirements.
Also provide a field that can tell the code to add some extra space onto
the bounce buffer for use by the filesystem in the case of a
content-encrypted file.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Implement support for unbuffered and DIO reads in the netfs library,
utilising the existing read helper code to do block splitting and
individual queuing. The code also handles extraction of the destination
buffer from the supplied iterator, allowing async unbuffered reads to take
place.
The read will be split up according to the rsize setting and, if supplied,
the ->clamp_length() method. Note that the next subrequest will be issued
as soon as issue_op returns, without waiting for previous ones to finish.
The network filesystem needs to pause or handle queuing them if it doesn't
want to fire them all at the server simultaneously.
Once all the subrequests have finished, the state will be assessed and the
amount of data to be indicated as having being obtained will be
determined. As the subrequests may finish in any order, if an intermediate
subrequest is short, any further subrequests may be copied into the buffer
and then abandoned.
In the future, this will also take care of doing an unbuffered read from
encrypted content, with the decryption being done by the library.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
netfs_read_folio() needs to handle partially-valid pages that are marked
dirty, but not uptodate in the event that someone tries to read a page was
used to cache data by a streaming write.
In such a case, make netfs_read_folio() set up a bvec iterator that points
to the parts of the folio that need filling and to a sink page for the data
that should be discarded and use that instead of i_pages as the iterator to
be written to.
This requires netfs_rreq_unlock_folios() to convert the page into a normal
dirty uptodate page, getting rid of the partial write record and bumping
the group pointer over to folio->private.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Provide a netfs write helper, netfs_perform_write() to buffer data to be
written in the pagecache and mark the modified folios dirty.
It will perform "streaming writes" for folios that aren't currently
resident, if possible, storing data in partially modified folios that are
marked dirty, but not uptodate. It will also tag pages as belonging to
fs-specific write groups if so directed by the filesystem.
This is derived from generic_perform_write(), but doesn't use
->write_begin() and ->write_end(), having that logic rolled in instead.
Signed-off-by: David Howells <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Dispatch one or more write reqeusts to process a writeback slice, where a
slice is tailored more to logical block divisions within the file (such as
crypto blocks, an object layout or cache granules) than the protocol RPC
maximum capacity.
The dispatch doesn't happen until throttling allows, at which point the
entire writeback slice is processed and queued. A slice may be written to
multiple destinations (one or more servers and the local cache) and the
writes to each destination might be split up along different lines.
The writeback slice holds the required folios pinned. An iov_iter is
provided in netfs_write_request that describes the buffer to be used. This
may be part of the pagecache, may have auxiliary padding pages attached or
may be a bounce buffer resulting from crypto or compression. Consequently,
the filesystem must not twiddle the folio markings directly.
The following API is available to the filesystem:
(1) The ->create_write_requests() method is called to ask the filesystem
to create the requests it needs. This is passed the writeback slice
to be processed.
(2) The filesystem should then call netfs_create_write_request() to create
the requests it needs.
(3) Once a request is initialised, netfs_queue_write_request() can be
called to dispatch it asynchronously, if not completed immediately.
(4) netfs_write_request_completed() should be called to note the
completion of a request.
(5) netfs_get_write_request() and netfs_put_write_request() are provided
to refcount a request. These take constants from the netfs_wreq_trace
enum for logging into ftrace.
(6) The ->free_write_request is method is called to ask the filesystem to
clean up a request.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Make the refcounting of netfs_begin_read() easier to use by not eating the
caller's ref on the netfs_io_request it's given. This makes it easier to
use when we need to look in the request struct after.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Modify the netfs_io_request struct to act as a point around which writes
can be coordinated. It represents and pins a range of pages that need
writing and a list of regions of dirty data in that range of pages.
If RMW is required, the original data can be downloaded into the bounce
buffer, decrypted if necessary, the modifications made, then the modified
data can be reencrypted/recompressed and sent back to the server.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Limit a subrequest to a maximum size and/or a maximum number of contiguous
physical regions. This permits, for instance, an subreq's iterator to be
limited to the number of DMA'able segments that a large RDMA request can
handle.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
Add a function to do the steps needed to begin a read request, allowing
this code to be removed from several other functions and consolidated.
Changes
=======
ver #2)
- Move before the unstaticking patch so that some functions can be left
static.
- Set uninitialised return code in netfs_begin_read()[1][2].
- Fixed a refleak caused by non-removal of a get from netfs_write_begin()
when the request submission code got moved to netfs_begin_read().
- Use INIT_WORK() to (re-)init the request work_struct[3].
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]/ [2]
Link: https://lore.kernel.org/r/[email protected]/ [3]
Link: https://lore.kernel.org/r/164623004355.3564931.7275693529042495641.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678214287.1200972.16734134007649832160.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692911113.2099075.1060868473229451371.stgit@warthog.procyon.org.uk/ # v3
|
|
Pass start and len to the rreq allocator. This should ensure that the
fields are set so that ->init_request() can use them.
Also add a parameter to indicates the origin of the request. Ceph can use
this to tell whether to get caps.
Changes
=======
ver #3)
- Change the author to me as Jeff feels that most of the patch is my
changes now.
ver #2)
- Show the request origin in the netfs_rreq tracepoint.
Signed-off-by: Jeff Layton <[email protected]>
Co-developed-by: David Howells <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/164622989020.3564931.17517006047854958747.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678208569.1200972.12153682697842916557.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692904155.2099075.14717645623034355995.stgit@warthog.procyon.org.uk/ # v3
|
|
Adjust the netfs_failure tracepoint to indicate a subrequest number of -1
when it's a full-request failure unrelated to any particular subrequest,
such as a failure to encrypt its data buffer.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/164623001948.3564931.2353852999649380059.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678204587.1200972.14893513018190383961.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692903233.2099075.15414355147237641274.stgit@warthog.procyon.org.uk/ # v3
|
|
Add refcount tracing for the netfs_io_subrequest structure.
Changes
=======
ver #3)
- Switch 'W=' to 'R=' in the traceline to match other request debug IDs.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/164622998584.3564931.5052255990645723639.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678202603.1200972.14726007419792315578.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692901860.2099075.4845820886851239935.stgit@warthog.procyon.org.uk/ # v3
|
|
Add refcount tracing for the netfs_io_request structure.
Changes
=======
ver #3)
- Switch 'W=' to 'R=' in the traceline to match other request debug IDs.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/164622997668.3564931.14456171619219324968.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678200943.1200972.7241495532327787765.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692900920.2099075.11847712419940675791.stgit@warthog.procyon.org.uk/ # v3
|
|
Adjust the netfs_rreq tracepoint to include the origin of the request and
to increase the size of the "what trace" output strings by a character so
that "ENCRYPT" and "DECRYPT" will fit without abbreviation.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/164622996715.3564931.4252319907990358129.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678199468.1200972.17275585970238114726.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692898684.2099075.12153225958137716567.stgit@warthog.procyon.org.uk/ # v3
|
|
Rename netfs_read_*request to netfs_io_*request so that the same structures
can be used for the write helpers too.
perl -p -i -e 's/netfs_read_(request|subrequest)/netfs_io_$1/g' \
`git grep -l 'netfs_read_\(sub\|\)request'`
perl -p -i -e 's/nr_rd_ops/nr_outstanding/g' \
`git grep -l nr_rd_ops`
perl -p -i -e 's/nr_wr_ops/nr_copy_ops/g' \
`git grep -l nr_wr_ops`
perl -p -i -e 's/netfs_read_source/netfs_io_source/g' \
`git grep -l 'netfs_read_source'`
perl -p -i -e 's/netfs_io_request_ops/netfs_request_ops/g' \
`git grep -l 'netfs_io_request_ops'`
perl -p -i -e 's/init_rreq/init_request/g' \
`git grep -l 'init_rreq'`
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/164622988070.3564931.7089670190434315183.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678195157.1200972.366609966927368090.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692891535.2099075.18435198075367420588.stgit@warthog.procyon.org.uk/ # v3
|
|
netfs has a number of lists of symbols for use in tracing, listed in an
enum and then listed again in a symbol->string mapping for use with
__print_symbolic(). This is, however, redundant.
Instead, use the symbol->string mapping list to also generate the enum
where the enum is in the same file.
Changes
=======
ver #3)
- #undef EM and E_ at the end of the trace file[1].
Signed-off-by: David Howells <[email protected]>
Acked-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/164622980839.3564931.5673300162465266909.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678192454.1200972.4428834328108580460.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/CALF+zOkB38_MB5QwNUtqTU4WjMaLUJ5+Piwsn3pMxkO3d4J7Kg@mail.gmail.com/ # v2
Link: https://lore.kernel.org/r/164692890614.2099075.12960653141802151575.stgit@warthog.procyon.org.uk/ # v3
|
|
Display the netfs inode number in the netfs_read tracepoint so that this
can be used to correlate with the cachefiles_prep_read tracepoint.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/163819581097.215744.17476611915583897051.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906885903.143852.12229407815154182247.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967078164.1823006.15286989199782861123.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021487412.640689.7544388469390936443.stgit@warthog.procyon.org.uk/ # v4
|
|
Move the cookie debug ID from struct netfs_read_request to struct
netfs_cache_resources and drop the 'cookie_' prefix. This makes it
available for things that want to use netfs_cache_resources without having
a netfs_read_request.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/162431190784.2908479.13386972676539789127.stgit@warthog.procyon.org.uk/
|
|
Add a tracepoint to log internal failures (such as cache errors) that we
don't otherwise want to pass back to the netfs.
Signed-off-by: David Howells <[email protected]>
Tested-by: Jeff Layton <[email protected]>
Tested-by: Dave Wysochanski <[email protected]>
Tested-By: Marc Dionne <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/161781048813.463527.1557000804674707986.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/161789082749.6155.15498680577213140870.stgit@warthog.procyon.org.uk/ # v6
|
|
Add an interface to the netfs helper library for reading data from the
cache instead of downloading it from the server and support for writing
data just downloaded or cleared to the cache.
The API passes an iov_iter to the cache read/write routines to indicate the
data/buffer to be used. This is done using the ITER_XARRAY type to provide
direct access to the netfs inode's pagecache.
When the netfs's ->begin_cache_operation() method is called, this must fill
in the cache_resources in the netfs_read_request struct, including the
netfs_cache_ops used by the helper lib to talk to the cache. The helper
lib does not directly access the cache.
Changes:
v6:
- Call trace_netfs_read() after beginning the cache op so that the cookie
debug ID can be logged[3].
- Don't record the error from writing to the cache. We don't want to pass
it back to the netfs[4].
- Fix copy-to-cache subreq amalgamation to not round up as it goes along
otherwise it overcalculates the length of the write[5].
v5:
- Use end_page_fscache() rather than unlock_page_fscache()[2].
v4:
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
- Add missing inc of netfs_n_rh_read stat.
- Move initial definition of fscache_begin_read_operation() elsewhere.
- Need to call op->begin_cache_operation() from netfs_write_begin().
Signed-off-by: David Howells <[email protected]>
Reviewed-and-tested-by: Jeff Layton <[email protected]>
Tested-by: Dave Wysochanski <[email protected]>
Tested-By: Marc Dionne <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]/ [2]
Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4]
Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5]
Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
|
|
Add a helper to do the pre-reading work for the netfs write_begin address
space op.
Changes
v6:
- Fixed a missing rreq put in netfs_write_begin()[3].
- Use DEFINE_READAHEAD()[4].
v5:
- Made the wait for PG_fscache in netfs_write_begin() killable[2].
v4:
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
Signed-off-by: David Howells <[email protected]>
Reviewed-and-tested-by: Jeff Layton <[email protected]>
Tested-by: Dave Wysochanski <[email protected]>
Tested-By: Marc Dionne <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]/ [2]
Link: https://lore.kernel.org/r/161781042127.463527.9154479794406046987.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/[email protected]/ [4]
Link: https://lore.kernel.org/r/160588543960.3465195.2792938973035886168.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118140165.1232039.16418853874312234477.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161035539.2537118.15674887534950908530.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340398368.1303470.11242918276563276090.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539541541.286939.1889738674057013729.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653798616.2770958.17213315845968485563.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789080530.6155.1011847312392330491.stgit@warthog.procyon.org.uk/ # v6
|
|
Add three tracepoints to track the activity of the read helpers:
(1) netfs/netfs_read
This logs entry to the read helpers and also expansion of the range in
a readahead request.
(2) netfs/netfs_rreq
This logs the progress of netfs_read_request objects which track
read requests. A read request may be a compound of multiple
subrequests.
(3) netfs/netfs_sreq
This logs the progress of netfs_read_subrequest objects, which track
the contributions from various sources to a read request.
Signed-off-by: David Howells <[email protected]>
Reviewed-and-tested-by: Jeff Layton <[email protected]>
Tested-by: Dave Wysochanski <[email protected]>
Tested-By: Marc Dionne <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/161118138060.1232039.5353374588021776217.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161033468.2537118.14021843889844001905.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340395843.1303470.7355519662919639648.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539538693.286939.10171713520419106334.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653796447.2770958.1870655382450862155.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789078003.6155.17814844411672989942.stgit@warthog.procyon.org.uk/ # v6
|