aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/phy/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-01-12usb: phy: remove phy-isp1301-omap driverArnd Bergmann1-17/+0
With the H2 and H3 board support removed from the driver, there are actually no other users, so the entire driver can go away. Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/ Suggested-by: Aaro Koskinen <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2022-11-09usb: phy: jz4770: Remove driverPaul Cercueil1-8/+0
This driver has been replaced by the Ingenic PHY driver that uses the generic PHY framework. Signed-off-by: Paul Cercueil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-08usb: phy: phy-gpio-vbus-usb: Add device tree probingLinus Walleij1-1/+5
Make it possible to probe the GPIO VBUS detection driver from the device tree compatible for GPIO USB B connectors. Since this driver is using the "gpio-usb-b-connector" compatible, it is important to discern it from the role switch connector driver (which does not provide a phy), so we add some Kconfig text and depend on !USB_CONN_GPIO. Cc: Rob Herring <[email protected]> Cc: Prashant Malani <[email protected]> Cc: Felipe Balbi <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: omap: avoid mach/*.h headersArnd Bergmann1-1/+2
The omap usb drivers still rely on mach/*.h headers that are explicitly or implicitly included, but all the required definitions are now in include/linux/soc/ti/, so use those instead and allow compile-testing on other architectures. Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Felipe Balbi <[email protected]> Acked-by: Tony Lindgren <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-12-09usb: phy: Fix spelling mistake in Kconfig help textColin Ian King1-1/+1
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-24USB: PHY: JZ4770: Add support for new Ingenic SoCs.周琰杰 (Zhou Yanjie)1-2/+2
Add support for probing the phy-jz4770 driver on the JZ4780 SoC, the X1000 SoC and the X1830 SoC from Ingenic. Tested-by: 周正 (Zhou Zheng) <[email protected]> Co-developed-by: 漆鹏振 (Qi Pengzhen) <[email protected]> Signed-off-by: 漆鹏振 (Qi Pengzhen) <[email protected]> Signed-off-by: 周琰杰 (Zhou Yanjie) <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2020-03-12usb: phy: Add driver for the Ingenic JZ4770 USB transceiverPaul Cercueil1-0/+8
Add a driver to support the USB PHY found in the JZ4770 SoC from Ingenic. Signed-off-by: Paul Cercueil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-30usb: phy: Enable compile testing for some of driversKrzysztof Kozlowski1-2/+2
Some of the USB phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-03usb: gadget: fsl: fix link error against usb-gadget moduleArnd Bergmann1-1/+1
The dependency to ensure this driver links correctly fails since it can not be a loadable module: drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_set_peripheral': phy-fsl-usb.c:(.text+0x2224): undefined reference to `usb_gadget_vbus_disconnect' Make the option 'tristate' so it can work correctly. Fixes: 5a8d651a2bde ("usb: gadget: move gadget API functions to udc-core") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2019-02-11Merge 5.0-rc6 into usb-nextGreg Kroah-Hartman1-1/+1
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-28usb: phy: fix link errorsAnders Roxell1-1/+1
Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is set to module then the following link error occurs. aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl': drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp': drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host': drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp': drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum': drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral': drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' make[1]: *** [Makefile:1020: vmlinux] Error 1 make[1]: Target 'Image' not remade because of errors. make: *** [Makefile:152: sub-make] Error 2 make: Target 'Image' not remade because of errors. Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin. Signed-off-by: Anders Roxell <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2019-01-22USB: add missing SPDX lines to Kconfig and MakefilesGreg Kroah-Hartman1-0/+1
There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-05-31phy: tegra: select USB_COMMONArnd Bergmann1-0/+1
A built-in PHY driver cannot link against modular USB core code: drivers/usb/phy/phy-tegra-usb.o: In function `tegra_usb_phy_probe': phy-tegra-usb.c:(.text+0x6bc): undefined reference to `usb_get_dr_mode' This uses a 'select' statement in Kconfig like we have for other such PHY drivers. Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Dmitry Osipenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-04-23usb: phy: Add Kconfig entry for Tegra PHY driverDmitry Osipenko1-0/+9
Tegra's EHCI driver has a build dependency on Tegra's PHY driver and currently Tegra's PHY driver is built only when Tegra's EHCI driver is built. Add own Kconfig entry for the Tegra's PHY driver so that drivers other than ehci-tegra (like ChipIdea UDC) could work with ehci-tegra driver being disabled in kernels config by allowing user to manually select the PHY driver. Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-11-01usb: phy: remove phy-qcom-8x16-usb.cAlex Elder1-14/+0
No Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driver support any more, so remove the code. Suggested-by: Stephen Boyd <[email protected]> Signed-off-by: Alex Elder <[email protected]> Acked-by: Bjorn Andersson <[email protected]> Acked-by: Andy Gross <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-11-01usb: phy: remove phy-msm-usb.cAlex Elder1-15/+0
No Qualcomm SoC requires the "phy-msm-usb.c" USB phy driver support any more, so remove the code. Suggested-by: Stephen Boyd <[email protected]> Signed-off-by: Alex Elder <[email protected]> Acked-by: Bjorn Andersson <[email protected]> Acked-by: Andy Gross <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-05-17usb: phy: Introduce one extcon device into usb phyBaolin Wang1-3/+3
Usually usb phy need register one extcon device to get the connection notifications. It will remove some duplicate code if the extcon device is registered using common code instead of each phy driver having its own related extcon APIs. So we add one pointer of extcon device into usb phy structure, and some other helper functions to register extcon. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2017-03-23usb: phy: Remove unused configBaolin Wang1-7/+0
Since the old common Samsung USB PHY code has been removed by commit ea2fdf8423 ("usb: phy: samsung: remove old common USB PHY code"), thus remove the unused config. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-11-18usb: twl6030-usb: make driver DT onlyNicolae Rosia1-0/+1
All users are DT-only and it makes no sense to keep unused code Acked-by: Tony Lindgren <[email protected]> Signed-off-by: Nicolae Rosia <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-06-21usb: gadget: move gadget API functions to udc-coreFelipe Balbi1-2/+9
instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <[email protected]> Acked-by: Peter Chen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-12-16usb: phy: phy-am335x: bypass first VBUS sensing for host-only modeBin Liu1-0/+1
To prevent VBUS contention, the am335x MUSB phy senses VBUS first before transitioning to host mode. However, for host-only mode, VBUS could be directly tied to 5V power rail which could prevent MUSB transitions to host mode. This change receives dr_mode of the controller then bypass the first VBUS sensing for host-only mode, so that MUSB can work in host mode event if VBUS is tied to 5V. Signed-off-by: Bin Liu <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-12-15usb: phy: Remove unused Renesas R-Car (Gen1) USB PHY driverGeert Uytterhoeven1-13/+0
As of commit 3d7608e4c169af03 ("ARM: shmobile: bockw: remove legacy board file and config"), the Renesas R-Car (Gen1) USB PHY driver is no longer used. In theory it could still be used on R-Car Gen1 SoCs, but that would require adding DT support to the driver. Instead, a new driver using the generic PHY framework should be written, as was done for R-Car Gen2. Remove the driver for good. Acked-by: Simon Horman <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-11-19usb: kconfig: fix warning of select USB_OTGPeter Chen1-3/+1
When choose randconfig for kernel build, it reports below warning: "warning: (USB_OTG_FSM && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && PM)" In fact, USB_OTG is visible symbol and depends on PM, so the driver needs to depend on it to reduce dependency problem. Signed-off-by: Peter Chen <[email protected]> Reported-by: Arnd Bergmann <[email protected]> Cc: Felipe Balbi <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-09-14usb: phy: fix phy-qcom-8x16-usb buildRandy Dunlap1-1/+1
Fix build errors that happen when USB_QCOM_8X16_PHY=y and EXTCON=m: drivers/built-in.o: In function `phy_8x16_init': phy-qcom-8x16-usb.c:(.text+0x86ef4): undefined reference to `extcon_get_cable_state' drivers/built-in.o: In function `phy_8x16_probe': phy-qcom-8x16-usb.c:(.text+0x870bf): undefined reference to `extcon_get_edev_by_phandle' phy-qcom-8x16-usb.c:(.text+0x87133): undefined reference to `extcon_register_interest' phy-qcom-8x16-usb.c:(.text+0x87151): undefined reference to `extcon_unregister_interest' drivers/built-in.o: In function `phy_8x16_remove': phy-qcom-8x16-usb.c:(.text+0x872ec): undefined reference to `extcon_unregister_interest' Signed-off-by: Randy Dunlap <[email protected]> Cc: Felipe Balbi <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-07-29usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driverIvan T. Ivanov1-0/+14
Driver handles PHY initialization, clock management, power management and workarounds required after resetting the hardware. Signed-off-by: Ivan T. Ivanov <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-05-07usb: phy: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-1/+1
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <[email protected]> Cc: <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-04-28usb: phy: Remove the phy-rcar-gen2-usb driverGeert Uytterhoeven1-13/+0
The phy-rcar-gen2-usb driver, which supports legacy platform data only, is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy board support"). This driver was superseded by the DT-only phy-rcar-gen2 driver, which was introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHY driver"). Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-04-28usb: phy: msm: Use extcon framework for VBUS and ID detectionIvan T. Ivanov1-0/+1
On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-03-24usb: phy: Fix USB_ULPI_VIEWPORT Kconfig dependencyIvan T. Ivanov1-1/+1
USB_ULPI_VIEWPORT didn't depend on USB_ULPI, while USB_ULPI is using non user selectable USB_ULPI_VIEWPORT. Fix this. Signed-off-by: Ivan T. Ivanov <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-03-13usb: phy: msm: Remove dead codeStephen Boyd1-1/+1
This code is no longer used now that mach-msm has been removed. Delete it. Cc: Felipe Balbi <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Cc: David Brown <[email protected]> Cc: Bryan Huntsman <[email protected]> Cc: Daniel Walker <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2015-01-07kconfig: use bool instead of boolean for type definition attributesChristoph Jaeger1-1/+1
Support for keyword 'boolean' will be dropped later on. No functional change. Reference: http://lkml.kernel.org/r/[email protected] Signed-off-by: Christoph Jaeger <[email protected]> Signed-off-by: Michal Marek <[email protected]>
2014-12-13PM / Kconfig: Replace PM_RUNTIME with PM in dependenciesRafael J. Wysocki1-2/+2
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so Kconfig options depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace PM_RUNTIME with PM in Kconfig dependencies throughout the tree. Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Felipe Balbi <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Tejun Heo <[email protected]>
2014-09-02usb: phy: samsung: remove old USB 3.0 PHY driverBartlomiej Zolnierkiewicz1-8/+0
drivers/usb/phy/phy-samsung-usb3 driver got replaced by drivers/phy/phy-samsung-usb3 one and is no longer used. Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Acked-by: Kyungmin Park <[email protected]> Reviewed-by: Vivek Gautam <[email protected]> Reviewed-by: Jingoo Han <[email protected]> Acked-by: Kishon Vijay Abraham I <[email protected]> Cc: Kamil Debski <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2014-09-02usb: phy: samsung: remove old USB 2.0 PHY driverBartlomiej Zolnierkiewicz1-8/+0
drivers/usb/phy/phy-samsung-usb2 driver got replaced by drivers/phy/phy-samsung-usb2 one and is no longer used. Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Acked-by: Kyungmin Park <[email protected]> Reviewed-by: Vivek Gautam <[email protected]> Reviewed-by: Jingoo Han <[email protected]> Acked-by: Kishon Vijay Abraham I <[email protected]> Cc: Kamil Debski <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2014-05-27phy: Enable USB PHY support for arm64Liviu Dudau1-1/+1
Signed-off-by: Liviu Dudau <[email protected]> Signed-off-by: Ryan Harkin <[email protected]> Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-05-27usb: common: rename phy-fsm-usb.c to usb-otg-fsm.cPeter Chen1-9/+0
Since usb otg fsm implementation is not related to usb phy. We move it from usb/phy/ to usb/common/, and rename it to reflect its real meaning. Cc: Felipe Balbi <[email protected]> Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-05-27usb: phy: add run-time dependencies to R-Car driverJean Delvare1-0/+1
The Renesas R-Car USB PHY driver only supports the R8A7778 and R8A7779, it isn't useful on other systems unless build testing. Signed-off-by: Jean Delvare <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Laurent Pinchart <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-05-23Merge tag 'usb-for-v3.16' of ↵Greg Kroah-Hartman1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.16 merge window Not a lot here during this merge window. Mostly we just have the usual miscellaneous patches (removal of unnecessary prints, proper dependencies being added to Kconfig, build warning fixes, new device ID, etc. Other than those, the only important new features are the new support for OS Strings which should help Linux Gadget Drivers behave better under MS Windows. Also Babble Recovery implementation for MUSB on AM335x. Lastly, we also have ARCH_QCOM PHY support though phy-msm. Signed-of-by: Felipe Balbi <[email protected]> Conflicts: drivers/usb/phy/phy-mv-u3d-usb.c
2014-05-14usb: phy: msm: reset controller is mandatory nowArnd Bergmann1-0/+1
Commit a27345434134 "usb: phy: msm: Use reset framework for LINK and PHY resets" introduced a mandatory call to reset_control_get into the msm usb phy driver, which means we have to add a Kconfig dependency on the API to avoid this build error: phy/phy-msm-usb.c: In function 'msm_otg_read_dt': phy/phy-msm-usb.c:1461:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] motg->link_rst = devm_reset_control_get(&pdev->dev, "link"); ^ Since the usb-ehci-msm driver currently selects the OTG driver, we could still get a broken dependency here. To solve that, this patch also removes the 'select', which turns out to be unnecessary. Reviewed-by: Ivan T. Ivanov <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2014-05-12usb: phy: msm: enable build on other architecturesFelipe Balbi1-1/+1
By adding COMPILE_TEST to the list of dependencies we can build test this driver on all other architectures which is very valuable for maintainers applying patches and to find silly mistakes during development. Reviewed-by: Ivan T. Ivanov <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2014-04-30usb: phy: msm: Make driver selectable on ARCH_QCOMIvan T. Ivanov1-3/+3
Controller could be found on APQ and MSM platforms, make configuration description more generic. Signed-off-by: Ivan T. Ivanov <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2014-04-24usb: phy: mv_u3d: Remove usb phy driver for mv_u3dPaul Bolle1-8/+0
The usb phy driver for mv_u3d got added in v3.7 through commit a67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver for mv_u3d"). It then depended on USB_MV_U3D. And that symbol depended on CPU_MMP3 at that time. But CPU_MMP3 has never been part of the tree. This means that this drive was unbuildable when it was added. In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency") MV_U3D_PHY was made depended directly on CPU_MMP3. That kept it unbuildable, of course. Remove this driver. It can be re-added once its dependencies are part of the tree. Signed-off-by: Paul Bolle <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-03-09phy: rename struct omap_control_usb to struct omap_control_phyKishon Vijay Abraham I1-10/+0
Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Roger Quadros <[email protected]> Acked-by: Felipe Balbi <[email protected]>
2014-03-06drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY FrameworkKishon Vijay Abraham I1-11/+0
Adapted omap-usb3 PHY driver to Generic PHY Framework and moved phy-omap-usb3 driver in drivers/usb/phy to drivers/phy and also renamed the file to phy-ti-pipe3 since this same driver will be used for SATA PHY and PCIE PHY. Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2013-12-23Merge tag 'v3.13-rc5' into nextFelipe Balbi1-1/+3
Linux 3.13-rc5 * tag 'v3.13-rc5': (231 commits) Linux 3.13-rc5 aio: clean up and fix aio_setup_ring page mapping aio/migratepages: make aio migrate pages sane aio: fix kioctx leak introduced by "aio: Fix a trinity splat" Don't set the INITRD_COMPRESS environment variable automatically mm: fix build of split ptlock code pstore: Don't allow high traffic options on fragile devices mm: do not allocate page->ptl dynamically, if spinlock_t fits to long mm: page_alloc: revert NUMA aspect of fair allocation policy Revert "mm: page_alloc: exclude unreclaimable allocations from zone fairness policy" mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure target: Remove extra percpu_ref_init arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled events ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h target/file: Update hw_max_sectors based on current block_size iser-target: Move INIT_WORK setup into isert_create_device_ib_res iscsi-target: Fix incorrect np->np_thread NULL assignment mm/hugetlb: check for pte NULL pointer in __page_check_address() fix build with make 3.80 ... Conflicts: drivers/usb/phy/Kconfig
2013-12-23usb: phy: fix some Kconfig descriptionsAaro Koskinen1-3/+3
Some module names are not up to date in Kconfig help texts. Fix that. Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2013-12-16usb: phy: fix driver dependenciesFelipe Balbi1-1/+3
both isp1301-omap and fsl_usb2_otg drivers depend on usb_bus_start_enum() which is only defined if CONFIG_USB != n. There is a problem, however, where both those drivers could be statically linked, while CONFIG_USB=m. Fix the problem by fixing driver dependency. Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-12-12usb: phy: add Keystone usb phy driverWingMan Kwok1-0/+9
Add Keystone platform USB PHY driver support. Current main purpose of this driver is to enable the PHY reference clock gate on the Keystone SoC. Otherwise it is a nop PHY. [ [email protected] : add COMPILE_TEST as a possible dependency make sure drvdata is initialized before adding PHY ] Cc: Greg Kroah-Hartman <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: WingMan Kwok <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2013-12-06usb: omap1: Tahvo USB transceiver driverAaro Koskinen1-0/+15
Add Tahvo USB transceiver driver. Based on old code from linux-omap tree. The original driver was written by Juha Yrjölä, Tony Lindgren, and Timo Teräs. Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2013-12-06usb: omap1: OTG controller driverAaro Koskinen1-0/+10
Transceivers need to manage OTG controller state on OMAP1 to enable switching between peripheral and host modes. Provide a driver for that. Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.