| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver")
declared but never implemented this.
Signed-off-by: Yue Haibing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The resource is checked in probe function, so there is
no need do this check in remove function.
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The third argument of usb_maxpacket(): in_out has been deprecated
because it could be derived from the second argument (e.g. using
usb_pipeout(pipe)).
N.B. function usb_maxpacket() was made variadic to accommodate the
transition from the old prototype with three arguments to the new one
with only two arguments (so that no renaming is needed). The variadic
argument is to be removed once all users of usb_maxpacket() get
migrated.
CC: Duncan Sands <[email protected]>
CC: Alan Stern <[email protected]>
CC: Olav Kongas <[email protected]>
CC: Rui Miguel Silva <[email protected]>
Signed-off-by: Vincent Mailhol <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.
c67x00_do_work() will now run in process context and have further
concurrency (tasklets being serialized among themselves), but this
is done holding the c67x00->lock, so it should be fine. Furthermore,
this patch fixes the usage of the lock in the callback as otherwise
it would need to be irq-safe.
Signed-off-by: Davidlohr Bueso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <[email protected]>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <[email protected]>
Signed-off-by: Allen Pais <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
comment blocks
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'sie' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'int_status' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'msg' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:267: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_start'
drivers/usb/c67x00/c67x00-hcd.c:279: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_stop'
Cc: Peter Korsgaard <[email protected]>
Cc: Oliver Neukum <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
clang static analysis flags this error
c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc]
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
^~~~~~~~~~~~
Problem happens in this block of code
c67x00_release_urb(c67x00, urb);
usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
spin_unlock(&c67x00->lock);
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
In the call to c67x00_release_urb has this freeing of urbp
urbp = urb->hcpriv;
urb->hcpriv = NULL;
list_del(&urbp->hep_node);
kfree(urbp);
And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd
parameter.
Since all is required is the status, pass the status directly as is
done in c64x00_urb_dequeue
Fixes: e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver")
Signed-off-by: Tom Rix <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
comment blocks
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'queue' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'node' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'hep' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'dev' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'next_frame' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ly_base_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'port_length' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pid_ep' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'dev_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ctrl_reg' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'status' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'retry_cnt' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'residue' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'next_td_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_list' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'data' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'urb' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'privdata' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ep_data' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pipe' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'c67x00' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'td' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'msg' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'a' not described in 'frame_add'
drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'b' not described in 'frame_add'
drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'a' not described in 'frame_after'
drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'b' not described in 'frame_after'
drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'a' not described in 'frame_after_eq'
drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'b' not described in 'frame_after_eq'
drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'c67x00' not described in 'c67x00_release_urb'
drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'urb' not described in 'c67x00_release_urb'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'c67x00' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'urb' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'data' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'len' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'pid' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'toggle' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'privdata' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'c67x00' not described in 'c67x00_add_ctrl_urb'
drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'urb' not described in 'c67x00_add_ctrl_urb'
drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'c67x00' not described in 'c67x00_parse_td'
drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'td' not described in 'c67x00_parse_td'
drivers/usb/c67x00/c67x00-sched.c:978: warning: Function parameter or member 'c67x00' not described in 'c67x00_check_td_list'
drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'c67x00' not described in 'c67x00_send_td'
drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'td' not described in 'c67x00_send_td'
drivers/usb/c67x00/c67x00-sched.c:1088: warning: Function parameter or member 'c67x00' not described in 'c67x00_do_work'
Cc: Peter Korsgaard <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
comment blocks
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'sie' not described in 'c67x00_ll_usb_clear_status'
drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'bits' not described in 'c67x00_ll_usb_clear_status'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'dev' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'addr' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'data' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'len' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'dev' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'addr' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'data' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'len' not described in 'c67x00_ll_read_mem_le16'
Cc: Peter Korsgaard <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch corrects the SPDX License Identifier style in
header files related to Cypress C67X00 USB Controller.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Nishad Kamdar <[email protected]>
Link: https://lore.kernel.org/r/20200315104022.GA3998@nishad
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
This updates the remaining drivers/usb/*Makefile* that were missing SPDX
identifiers. They all get the following identifier:
SPDX-License-Identifier: GPL-2.0
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Thomas Winischhofer <[email protected]>
Cc: Johan Hovold <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/usb/ and include/linux/usb* files with the correct
SPDX license identifier based on the license text in the file itself.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Acked-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Pointer urbp is assigned but is never read, hence it is redundant
and can be removed. Cleans up clang warning:
drivers/usb/c67x00/c67x00-sched.c:975:2: warning: Value stored to 'urbp'
is never read
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The hc_driver structure is only passed as the first argument to
usb_create_hcd, which is declared as const. Thus the hc_driver structure
itself can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Fix using the bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value is #define'd in <linux/usb/ch11.h>.
Signed-off-by: Sergei Shtylyov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Signed-off-by: Rahul Bedarkar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This fixes the following warning:
BUG: sleeping function called from invalid context at mm/slub.c:940
in_atomic(): 1, irqs_disabled(): 1, pid: 17, name: khubd
CPU: 0 PID: 17 Comm: khubd Not tainted 3.12.0-00004-g938dd60-dirty #1
__might_sleep+0xbe/0xc0
kmem_cache_alloc_trace+0x36/0x170
c67x00_urb_enqueue+0x5c/0x254
usb_hcd_submit_urb+0x66e/0x724
usb_submit_urb+0x2ac/0x308
usb_start_wait_urb+0x2c/0xb8
usb_control_msg+0x8c/0xa8
hub_port_init+0x191/0x718
hub_thread+0x804/0xe14
kthread+0x72/0x78
ret_from_kernel_thread+0x8/0xc
Signed-off-by: Max Filippov <[email protected]>
Acked-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
According to CY7C67300 specification HPI read and write cycle duration
Tcyc must be at least 6T long, where T is 1/48MHz, which is 125ns.
Without this delay fast host processor cannot write to chip registers.
Add proper ndelay to hpi_{read,write}_reg.
Signed-off-by: Max Filippov <[email protected]>
Acked-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This removes the usage of CONFIG_USB_DEBUG in the c67x00 driver. There
was only one place, where the TD was dumped to the kernel log, and that
was using the dynamic debug infrastructure already, with the exception
of the call to print_hex_dump(). So move everything to the dynamic
debug infrastructure, including one odd printk(KERN_DEBUG...) line that
looks like it was forgotten about a long time ago.
Acked-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Individual controller driver has different requirement for wakeup
setting, so move it from core to itself. In order to align with
current etting the default wakeup setting is enabled (except for
chipidea host).
Pass compile test with below commands:
make O=outout/all allmodconfig
make -j$CPU_NUM O=outout/all drivers/usb
Signed-off-by: Peter Chen <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.
[[email protected]: linux-next resyncs]
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Linus Walleij <[email protected]> (personally at LCE13)
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.
Signed-off-by: Jingoo Han <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
RetryCnt value in c67x00 TD should be 3 (both bits set to 1). Reference
Cypress Semiconductor BIOS User's Manual 1.2, page 3-14
Signed-off-by: Dave Tubbs <[email protected]>
Acked-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
TD data length is 10 bits, correct TD_PORTLENMASK_DL. Reference
Cypress Semiconductor BIOS User's Manual 1.2, page 3-10
Signed-off-by: Dave Tubbs <[email protected]>
Acked-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The callers expect this function to return zero on success or -EIO if it
times out. The type should be int instead of unsigned short.
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: Bill Pemberton <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Wan ZongShun <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Kukjin Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Cc: Li Yang <[email protected]>
Acked-by: Alan Stern <[email protected]>
Cc: Geoff Levand <[email protected]>
Cc: Wan ZongShun <[email protected]>
Cc: Olav Kongas <[email protected]>
Cc: Lennert Buytenhek <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Kukjin Kim <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Wan ZongShun <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Kukjin Kim <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Acked-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch converts the drivers in drivers/usb/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: Felipe Balbi <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Kuninori Morimoto <[email protected]>
Cc: Sarah Sharp <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Alan Stern <[email protected]>
Signed-off-by: Axel Lin <[email protected]>
Acked-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The HCD_FLAG_SAW_IRQ flag was introduced in order to catch IRQ routing
errors: If an URB was unlinked and the host controller hadn't gotten
any IRQs, it seemed likely that the IRQs were directed to the wrong
vector.
This warning hasn't come up in many years, as far as I know; interrupt
routing now seems to be well under control. Therefore there's no
reason to keep the flag around any more. This patch (as1495) finally
removes it.
Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The situation up to this point meant that module.h was pretty
much everywhere, regardless of whether you asked for it or not.
We are fixing that, so give the USB folks who want it an actual
include of it.
Signed-off-by: Paul Gortmaker <[email protected]>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
For all modules, change <module>-objs to <module>-y; remove
if-statements and replace with lists using the kbuild idiom; move
flags to the top of the file; and fix alignment while trying to
maintain the original scheme in each file.
None of the dependencies are modified.
Signed-off-by: matt mooney <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch (as1393) converts several of the single-bit fields in
struct usb_hcd to atomic flags. This is for safety's sake; not all
CPUs can update bitfield values atomically, and these flags are used
in multiple contexts.
The flag fields that are set only during registration or removal can
remain as they are, since non-atomic accesses at those times will not
cause any problems.
(Strictly speaking, the authorized_default flag should become atomic
as well. I didn't bother with it because it gets changed only via
sysfs. It can be done later, if anyone wants.)
Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The usbcore headers: hcd.h and hub.h are shared between usbcore,
HCDs and a couple of other drivers (e.g. USBIP modules).
So, it makes sense to move them into a more public location and
to cleanup dependency of those modules on kernel internal headers.
This patch moves hcd.h from drivers/usb/core into include/linux/usb/
Signed-of-by: Eric Lescouet <[email protected]>
Cc: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <[email protected]>
Guess-its-ok-by: Christoph Lameter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Lee Schermerhorn <[email protected]>
|
|
Signed-off-by: Thiago Farina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch fixes bug #10627 which caused the compilation error below.
CC [M] drivers/usb/c67x00/c67x00-ll-hpi.o
drivers/usb/c67x00/c67x00-ll-hpi.c: In function `ll_recv_msg':
drivers/usb/c67x00/c67x00-ll-hpi.c:243: erreur: `HZ' undeclared (first use in this function)
drivers/usb/c67x00/c67x00-ll-hpi.c:243: erreur: (Each undeclared identifier is reported only once
drivers/usb/c67x00/c67x00-ll-hpi.c:243: erreur: for each function it appears in.)
Signed-off-by: Fernando Luis Vazquez Cao <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch adds HCD support for the Cypress c67x00 family of devices.
Signed-off-by: Peter Korsgaard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch add the core driver for the c67x00 USB OTG controller. The core
driver is responsible for the platform bus binding and creating either
USB HCD or USB Gadget instances for each of the serial interface engines
on the chip.
This driver does not directly implement the HCD or gadget behaviours; it
just controls access to the chip.
Signed-off-by: Peter Korsgaard <[email protected]>
Acked-by: David Brownell <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch adds the low level support code for the Cypress c67x00 family of
OTG controllers. The low level code is responsible for register access and
implements the software protocol for communicating with the 16bit
microcontroller inside the c67x00 device.
Communication is done over the HPI interface (16bit SRAM-like parallel bus).
Signed-off-by: Peter Korsgaard <[email protected]>
Acked-by: David Brownell <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|