aboutsummaryrefslogtreecommitdiff
path: root/drivers/pps/generators
AgeCommit message (Collapse)AuthorFilesLines
2024-07-03parport: Remove parport_driver.devmodelDr. David Alan Gilbert1-1/+0
'devmodel' hasn't actually been used since: 'commit 3275158fa52a ("parport: remove use of devmodel")' and everyone now has it set to true and has been fixed up; remove the flag. (There are still comments all over about it) Signed-off-by: Dr. David Alan Gilbert <[email protected]> Acked-by: Sudip Mukherjee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-03-07pps: use cflags-y instead of EXTRA_CFLAGSLukas Bulwahn1-3/+1
Commit f77bf01425b1 ("kbuild: introduce ccflags-y, asflags-y and ldflags-y") deprecates use of EXTRA_CFLAGS in the kernel build. This has been cleaned up in the whole kernel tree long ago, but this one single place must have been missed. Replace the EXTRA_CFLAGS use by the common pattern for such debug flags. No functional change. Signed-off-by: Lukas Bulwahn <[email protected]> Acked-by: Rodolfo Giometti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-03-18pps: generators: pps_gen_parport: Switch to use module_parport_driver()Andy Shevchenko1-35/+7
Switch to use module_parport_driver() to reduce boilerplate code. Note, it doesn't matter when we check the module parameter. If it was writable we even would have more flexibility of changing it at runtime (when built-in the kernel) after this patch. Acked-by: Rodolfo Giometti <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Michael Ellerman <[email protected]> (powerpc) Reviewed-by: Richard Fontana <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Kate Stewart <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-14pps: generator: use new parport device modelSudip Mukherjee1-3/+9
Modify pps generator driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <[email protected]> Acked-by: Rodolfo Giometti <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-06pps: parport: use timespec64 instead of timespecArnd Bergmann1-20/+20
getnstimeofday() is deprecated, so I'm converting this to use ktime_get_real_ts64() as a safe replacement. I considered using ktime_get_real() instead, but since the algorithm here depends on the exact timing, I decided to introduce fewer changes and leave the code that determines the nanoseconds since the last seconds wrap untouched. It's not entirely clear to me whether we should also change the time base to CLOCK_BOOTTIME or CLOCK_TAI. With boottime, we would be independent of changes due to settimeofday() and only see the speed adjustment from the upstream clock source, with the downside of having the signal be at an arbirary offset from the start of the UTC second signal. With CLOCK_TAI, we would use the same offset from the UTC second as before and still suffer from settimeofday() adjustments, but would be less confused during leap seconds. Both boottime and tai only offer usable (i.e. avoiding ktime_t to timespec64 conversion) interfaces for ktime_t though, so either way, changing it wouldn't take significantly more work. CLOCK_MONOTONIC could be used with ktime_get_ts64(), but would lose synchronization across a suspend/resume cycle, which seems worse. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Rodolfo Giometti <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-09-08drivers/pps: use surrounding "if PPS" to remove numerous dependency checksRobert P. J. Day1-2/+1
Adding high-level "if PPS" makes lower-level dependency tests superfluous. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Robert P. J. Day <[email protected]> Acked-by: Rodolfo Giometti <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-05-18drivers: pps: Make PPS into a menuconfig to ease disablingVincent Legoll1-1/+2
So that there's no need to get into the submenu to disable all related config entries. The BROKEN PPS_GENERATOR_PARPORT now also depends on PPS Signed-off-by: Vincent Legoll <[email protected]> Acked-by: Rodolfo Giometti <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-03-22pps: remove unreachable codeAlexander Gordeev1-5/+0
Remove code enabled only when CONFIG_PREEMPT_RT is turned on because it is not used in the vanilla kernel. Signed-off-by: Alexander Gordeev <[email protected]> Cc: john stultz <[email protected]> Cc: Rodolfo Giometti <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-04pps: make pps_gen_parport depend on BROKENThomas Gleixner1-1/+1
This driver causes hard lockups, when the active clock soure is jiffies. The reason is that it loops with interrupts disabled waiting for a timestamp to be reached by polling getnstimeofday(). Though with a jiffies clocksource, when that code runs on the same CPU which is responsible for updating jiffies, then we loop in circles for ever simply because the timer interrupt cannot update jiffies. So both UP and SMP can be affected. There is no easy fix for that problem so make it depend on BROKEN for now. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Alexander Gordeev <[email protected]> Cc: Rodolfo Giometti <[email protected]> Cc: john stultz <[email protected]> Cc: Ingo Molnar <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-01-26pps: claim parallel port exclusivelyAlexander Gordeev1-1/+1
Both pps_parport and pps_gen_parport are written in a way that they can't share a port with any other driver. This can result in locking up the process that loads modules or even the whole kernel if the modules are compiled in. Use PARPORT_FLAG_EXCL to indicate this. Signed-off-by: Alexander Gordeev <[email protected]> Cc: Alexander Gordeev <[email protected]> Cc: Ingo Molnar <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-01-13pps: add parallel port PPS signal generatorAlexander Gordeev2-7/+10
Add PPS signal generator which utilizes STROBE pin of a parallel port to send PPS signals. It uses parport abstraction layer and hrtimers to precisely control the signal. Signed-off-by: Alexander Gordeev <[email protected]> Cc: Rodolfo Giometti <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-01-13pps: add parallel port PPS signal generatorAlexander Gordeev3-0/+301
Add PPS signal generator which utilizes STROBE pin of a parallel port to send PPS signals. It uses parport abstraction layer and hrtimers to precisely control the signal. [[email protected]: fix build] Signed-off-by: Alexander Gordeev <[email protected]> Acked-by: Rodolfo Giometti <[email protected]> Cc: john stultz <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.