| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messages in the kernel ring buffer:
amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340
Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message.
Link: https://lore.kernel.org/platform-driver-x86/[email protected]
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Acked-by: Shyam Sundar S K <[email protected]>
Signed-off-by: Corey Hickey <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
PMC driver has capability to get the idle mask values and STB data from
the PMFW. Extend this support to the platforms that belong to family 1Ah
model 60h series.
Co-developed-by: Sanket Goswami <[email protected]>
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
The commit 426463d94d45 ("platform/x86/amd/pmc: Send OS_HINT command for
new AMD platform") was introduced to enable sending mailbox commands to
PMFW on newer platforms. However, it was later discovered that the commit
did not configure the correct message port ID (i.e., S2D or PMC). Without
this configuration, all command submissions to PMFW are treated as
invalid, leading to command failures.
To address this issue, the CPU ID association for the new platform needs
to be added in amd_pmc_get_ip_info(). This ensures that the correct SMU
port IDs are selected.
Fixes: 426463d94d45 ("platform/x86/amd/pmc: Send OS_HINT command for new AMD platform")
Co-developed-by: Sanket Goswami <[email protected]>
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
To initiate the HW deep state transition, the OS_HINT command has to be
sent to the PMFW. Add this support to the platforms that belong to family
1Ah model 60h series.
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
|
|
Add new ACPI ID AMDI000B used by upcoming AMD platform to the PMC
supported list of devices.
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Add depended header file to fix error on i386 due to implicit declaration
of function ‘writeq’.
Fixes: 2dc77993cb5e ("platform/x86/amd/pmc: Add AMD MP2 STB functionality")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Suggested-by: Andy Shevchenko <[email protected]>
Signed-off-by: Basavaraj Natikar <[email protected]>
Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
AMD MP2 STB function provides a data buffer used to log debug information
about the system execution during S2Idle suspend/resume.
A data buffer known as the STB (Smart Trace Buffer) is a circular buffer
which is a low-level log to assist in debugging by providing insights
into any potential hangs or stalls that may occur during the S2Idle
suspend/resume processes.
The current PMC driver retrieves STB data from MP1, but there can be
scenarios where MP1 might hang or become unresponsive, leading to the
loss of critical data present in the STB buffer. This defeats the purpose
of the STB buffer, which was originally meant to help identify system
failures.
This feature creates stb_read_previous_boot debugfs allows users to
retrieve the STB log from MP2 specifically from the last occurrence of
the S2Idle suspend/resume. A userspace daemon can access STB log of last
S2Idle suspend/resume which can help to troubleshoot potential issues
related to hangs or stalls during the S2Idle suspend/resume sequence.
Reviewed-by: Shyam Sundar S K <[email protected]>
Signed-off-by: Basavaraj Natikar <[email protected]>
Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
The latest platforms use a different SMU message port(0x938) from the one
currently being used (0x538). Make code changes to adapt to this new
information.
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
AMD newer platforms, (AMDI000A or family 1Ah series) also supports the STB
functionality. Add this to amd_pmc_is_stb_supported().
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Idlemask is an indication of each IP block current state (i.e. whether it
is running or idle) during s2idle transistion. The newer 1Ah family
supports this feature, add it to the support list.
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
In the current code, amd_pmc_get_ip_info() is being called from
amd_pmc_s2d_init() and that code block gets enabled only when the STB is
being enabled.
But the information from amd_pmc_get_ip_info() will be required outside of
STB usecase. Hence move this call into driver probe sequence.
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Latest AMD SoCs has VPE (Video Processing Engine) IP block and the
statistics related to this IP can be obtained as a part of metrics table
information that the PMFW propogates. Add this support for 1Ah family
series.
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
To initiate the HW deep state transistion the OS_HINT command has to be
sent the PMFW. Add this support to the platforms that has AMDI000A
support.
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on
resume.
```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```
In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.
Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.
Cc: Kieran Levin <[email protected]>
Link: https://github.com/FrameworkComputer/EmbeddedController/blob/lotus-zephyr/zephyr/program/lotus/azalea/src/power_sequence.c#L313 [1]
Link: https://community.frame.work/t/amd-wont-sleep-properly/41755
Link: https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-wakeup-behavior-feedback/39128
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Other platforms may need to disable keyboard wakeup besides Cezanne,
so move the detection into amd_pmc_quirks_init() where it may be applied
to multiple platforms.
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but
may be extended to other platforms in the future. Rename the function
and only check platform firmware version when it's called for a Cezanne
based platform.
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
The platform defines will be used by the quirks in the future,
so move them to the common header to allow use by both source
files.
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
amd_pmc_get_dram_size() is used to get the DRAM size information. But
in the current code, mailbox command to get the DRAM size info is sent
based on the values of dev->major and dev->minor.
But dev->major and dev->minor will have either junk or zero assigned to
them until at least once a call to amd_pmc_get_smu_version() is made
which ideally populates dev->major and dev->minor.
However, adding a amd_pmc_get_smu_version() call to
amd_pmc_get_dram_size() has a downside of elevating the boot times.
After talking to the PMFW team, it's understood that the "get dram
size" mbox command would only be supported on specific platforms (like
Mendocino) and not all. So, adjust getting DRAM size behavior such
that,
- if running on Rembrandt or Mendocino and the underlying PMFW knows
how to execute the "get dram size" command it shall give the custom
dram size.
- if the underlying FW does not report the dram size, we just proceed
further and assign the default dram size.
The simplest way to address this is to remove amd_pmc_get_dram_size()
function and directly call the "get dram size" command in the
amd_pmc_s2d_init().
Reported-by: Mark Hasemeyer <[email protected]>
Fixes: be8325fb3d8c ("platform/x86/amd: pmc: Get STB DRAM size from PMFW")
Cc: [email protected]
Suggested-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- asus-wmi: Support for screenpad and solve brightness key press
duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: inspur-platform-profile: Add platform profile support
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
platform/x86: wmi: Decouple WMI device removal from wmi_block_list
platform/x86: wmi: Fix opening of char device
platform/x86: wmi: Fix probe failure when failing to register WMI devices
platform/x86: wmi: Fix refcounting of WMI devices in legacy functions
platform/x86: wmi: Decouple probe deferring from wmi_block_list
platform/x86/amd/hsmp: Fix iomem handling
platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video
platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy
tools/power/x86/intel-speed-select: v1.18 release
tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0
tools/power/x86/intel-speed-select: Increase max CPUs in one request
tools/power/x86/intel-speed-select: Display error for core-power support
tools/power/x86/intel-speed-select: No TRL for non compute domains
tools/power/x86/intel-speed-select: turbo-mode enable disable swapped
tools/power/x86/intel-speed-select: Update help for TRL
tools/power/x86/intel-speed-select: Sanitize integer arguments
platform/x86: acer-wmi: Remove void function return
platform/x86/amd/pmc: Add dump_custom_stb module parameter
...
|
|
When suspending to idle and resuming on some Lenovo laptops using the
Mendocino APU, multiple NVME IOMMU page faults occur, showing up in
dmesg as repeated errors:
nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000b
address=0xb6674000 flags=0x0000]
The system is unstable afterwards.
Applying the s2idle quirk introduced by commit 455cd867b85b ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
allows these systems to work with the IOMMU enabled and s2idle
resume to work.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218024
Suggested-by: Mario Limonciello <[email protected]>
Suggested-by: Mark Pearson <[email protected]>
Signed-off-by: David Lazar <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Reviewed-by: Mark Pearson <[email protected]>
Link: https://lore.kernel.org/r/ZTlsyOaFucF2pWrL@localhost
Signed-off-by: Hans de Goede <[email protected]>
|
|
There have been instances when the default size (1M) of the STB is not
sufficient to get the complete traces of the failure. In such scenarios
we can use a module_param to enable full trace that shall contain more
debugging data. This is not a regular case and hence not enabling this
capability by default.
With this change, there will be two cases on how the driver fetches the
stb data:
1) A special case (proposed now) - which is required only for certain
platforms. Here, a new module param will be supplied to the driver that
will have a special PMFW supporting enhanced dram sizes for getting
the stb data. Without the special PMFW support, just setting the module
param will not help to get the enhanced stb data.
To adapt to this change, we will have a new amd_pmc_stb_handle_efr() to
handle enhanced firmware reporting mechanism. Note that, since num_samples
based r/w pointer offset calculation is not required for enhanced firmware
reporting we will have this mailbox command sent only in case of regular
STB cases.
2) Current code branch which fetches the stb data based on the parameters
like the num_samples, fsize and the r/w pointer.
Reviewed-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Co-developed-by: Harsh Jain <[email protected]>
Signed-off-by: Harsh Jain <[email protected]>
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ij: Renamed flex_arr -> stb_data_arr]
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
higher
In amd_pmc_stb_debugfs_open_v2(), the stb buffer is created based on the
num_samples and the read/write pointer offset. This holds good when the
num_samples reported by PMFW is less than S2D_TELEMETRY_BYTES_MAX; where
the stb buffer gets filled from 0th position until
S2D_TELEMETRY_BYTES_MAX - 1 based on the read/write pointer offset.
But when the num_samples exceeds the S2D_TELEMETRY_BYTES_MAX, the current
code does not handle it well as it does not account for the cases where
the stb buffer has to filled up as a circular buffer.
Handle this scenario into two cases, where first memcpy will have the
samples from location:
(num_samples % S2D_TELEMETRY_BYTES_MAX) - (S2D_TELEMETRY_BYTES_MAX - 1)
and next memcpy will have the newest ones i.e.
0 - (num_samples % S2D_TELEMETRY_BYTES_MAX - 1)
Suggested-by: Hans de Goede <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ij: renamed flex_arr -> stb_data_arr]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Currently in amd_pmc_stb_debugfs_open_v2() the buffer size is assumed to
be fixed and a second call to amd_pmc_stb_debugfs_open_v2() may race with
a process holding open another fd. This could change "fsize" to a
bigger size causing an out of bounds read.
Instead create a struct with a flexarray to solve this.
Suggested-by: Hans de Goede <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ij: renamed flex_arr -> stb_data_arr]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Recent PMFW have the capability that can force flush the FIFO
contents to DRAM on sending a command id via the mailbox. Add this support
to the driver.
Co-developed-by: Sanket Goswami <[email protected]>
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ij: Corrected whitespace in dev_dbg_once()]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
on x86_64:
CONFIG_SUSPEND is not set
CONFIG_PM is not set
this leads to build failure of the AMD PMC driver. Add a 'depends on'
in the Kconfig.
Reported-by: Randy Dunlap <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Shyam Sundar S K <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
With latest commits having PMC code spread across multiple files, it would
be easier to maintain them in a separate directory under amd/pmc.
Co-developed-by: Sanket Goswami <[email protected]>
Signed-off-by: Sanket Goswami <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|