aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy/qualcomm
AgeCommit message (Collapse)AuthorFilesLines
2024-10-17phy: qcom: qmp-pcie: drop bogus x1e80100 qref suppliesJohan Hovold1-4/+4
The PCIe PHYs on x1e80100 do not a have a qref supply so stop requesting one. This also avoids the follow warning at boot: qcom-qmp-pcie-phy 1bfc000.phy: supply vdda-qref not found, using dummy regulator Fixes: 9dab00ee9544 ("phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100") Fixes: 606060ce8fd0 ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE") Cc: Abel Vesa <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-10-17phy: qcom: qmp-combo: move driver data initialisation earlierJohan Hovold1-2/+1
Commit 44aff8e31080 ("phy: qcom-qmp-combo: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. The initialisation was soon after restored by commit 83a0bbe39b17 ("phy: qcom-qmp-combo: add support for updated sc8280xp binding") but now happens slightly later during probe. This should not cause any trouble currently as runtime PM needs to be enabled manually through sysfs and the platform device would not be suspended before the PHY has been registered anyway. Move the driver data initialisation to avoid a NULL-pointer dereference on runtime suspend if runtime PM is ever enabled by default in this driver. Fixes: 44aff8e31080 ("phy: qcom-qmp-combo: clean up probe initialisation") Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-10-17phy: qcom: qmp-usbc: fix NULL-deref on runtime suspendJohan Hovold1-0/+1
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. Fixes: 19281571a4d5 ("phy: qcom: qmp-usb: split USB-C PHY driver") Cc: [email protected] # 6.9 Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-10-17phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspendJohan Hovold1-0/+1
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. Fixes: e464a3180a43 ("phy: qcom-qmp-usb: split off the legacy USB+dp_com support") Cc: [email protected] # 6.6 Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-10-17phy: qcom: qmp-usb: fix NULL-deref on runtime suspendJohan Hovold1-0/+1
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with this driver. Fixes: 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") Cc: [email protected] # 6.2 Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-09-23Merge tag 'phy-for-6.12' of ↵Linus Torvalds7-69/+125
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hw support: - Rcar usb2 support for RZ/G3S SoC - Nuvoton MA35 SoC USB 2.0 PHY driver Removed: - obsolete qcom,usb-8x16-phy bindings Updates: - 4 lane PCIe support for Qualcomm X1E80100 - Constify structure in subsystem update - Subsystem simplification with scoped for each OF child loop update - Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy bindings" * tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits) phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings phy: renesas: rcar-gen3-usb2: Add support to initialize the bus phy: ti: j721e-wiz: Simplify with scoped for each OF child loop phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code phy: ti: gmii-sel: Simplify with dev_err_probe() phy: ti: am654-serdes: Use scoped device node handling to simplify error paths phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop phy: mediatek: xsphy: Simplify with scoped for each OF child loop phy: mediatek: tphy: Simplify with scoped for each OF child loop phy: hisilicon: usb2: Simplify with scoped for each OF child loop phy: cadence: sierra: Simplify with scoped for each OF child loop phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings phy: qcom: qmp-pcie: Configure all tables on port B PHY phy: airoha: adjust initialization delay in airoha_pcie_phy_init() dt-bindings: phy: socionext,uniphier: add top-level constraints phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100 ...
2024-08-30phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loopKrzysztof Kozlowski1-8/+3
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-08-29phy: qcom: qmp-pcie: Configure all tables on port B PHYQiang Yu1-1/+13
Currently, only the RX and TX tables are written to the second PHY (port B) when the 4-lanes mode is configured, but according to Qualcomm internal documentation, the pcs, pcs_misc, serdes and ln_shrd tables need to be written as well. Signed-off-by: Qiang Yu <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/20240805-phy-qcom-qmp-pcie-write-all-tbls-second-port-v3-1-6967c6bf61d1@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-08-29phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100Abel Vesa1-0/+42
The sixth PCIe controller on X1E80100 can be used in either 4-lanes mode or 2-lanes mode. Add the configuration and compatible for the 4-lane mode. Reviewed-by: Johan Hovold <[email protected]> Signed-off-by: Abel Vesa <[email protected]> Tested-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-08-04phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisationAbel Vesa1-7/+16
Update the PCIe Gen4 PHY init sequence with the latest based on internal Qualcomm documentation. Fixes: 606060ce8fd0 ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE") Signed-off-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/20240801-x1e80100-phy-qmp-pcie-fix-config-v2-1-cdc0f22b4169@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-07-31phy: qcom: qmp: Add debug prints for register writesManivannan Sadhasivam7-60/+67
These register prints are useful to validate the init sequence against the Qcom internal documentation and also to share with the Qcom hw engineers to debug issues related to PHY. Sample debug prints: qcom-qmp-pcie-phy 1c0e000.phy: Writing Reg: QSERDES_V5_COM_SYSCLK_EN_SEL Offset: 0x0094 Val: 0xd9 qcom-qmp-pcie-phy 1c0e000.phy: Writing Reg: QSERDES_V5_COM_HSCLK_SEL Offset: 0x0158 Val: 0x11 Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-07-24Merge tag 'phy-for-6.11' of ↵Linus Torvalds4-6/+332
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New Support - Samsung Exynos gs101 drd combo phy - Qualcomm SC8180x USB uniphy, IPQ9574 QMP PCIe phy - Airoha EN7581 PCIe phy - Freescale i.MX8Q HSIO SerDes phy - Starfive jh7110 dphy tx Updates: - Resume support for j721e-wiz driver - Updates to Exynos usbdrd driver - Support for optional power domains in g12a usb2-phy driver - Debugfs support and updates to zynqmp driver" * tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (56 commits) phy: airoha: Add dtime and Rx AEQ IO registers dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema dt-bindings: phy: qcom,qmp-usb: fix spelling error phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS) phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk phy: exynos5-usbdrd: convert (phy) register access clock to clk_bulk phy: exynos5-usbdrd: convert core clocks to clk_bulk phy: exynos5-usbdrd: support isolating HS and SS ports independently dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible phy: core: Fix documentation of of_phy_get phy: starfive: Correct the dphy configure process phy: zynqmp: Add debugfs support phy: zynqmp: Take the phy mutex in xlate phy: zynqmp: Only wait for PLL lock "primary" instances phy: zynqmp: Store instance instead of type phy: zynqmp: Enable reference clock correctly phy: cadence-torrent: Check return value on register read phy: Fix the cacography in phy-exynos5250-usb2.c phy: phy-rockchip-samsung-hdptx: Select CONFIG_MFD_SYSCON ...
2024-06-15phy: qcom: qmp-pcie: restore compatibility with existing DTsDmitry Baryshkov1-6/+3
Existing device trees specify only a single clock-output-name for the PCIe PHYs. The function phy_aux_clk_register() expects a second entry in that property. When it doesn't find it, it returns an error, thus failing the probe of the PHY and thus breaking support for the corresponding PCIe host. Follow the approach of the combo USB+DT PHY and generate the name for the AUX clocks instead of requiring it in DT. Fixes: 583ca9ccfa80 ("phy: qcom: qmp-pcie: register second optional PHY AUX clock") Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-06-03phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEsdevi priya1-0/+309
Add support for a single-lane and two-lane PCIe PHYs found on Qualcomm IPQ9574 platform. Reviewed-by: Abel Vesa <[email protected]> Co-developed-by: Anusha Rao <[email protected]> Signed-off-by: Anusha Rao <[email protected]> Signed-off-by: devi priya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-06-03phy: qcom-qmp: Add missing register definitions for PCS V5devi priya1-0/+14
Add missing register offsets for PCS V5 registers. Reviewed-by: Abel Vesa <[email protected]> Signed-off-by: devi priya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-06-03phy: qcom-qmp: Add missing offsets for Qserdes PLL registers.devi priya1-0/+3
Add missing register offsets for Qserdes PLL. Reviewed-by: Abel Vesa <[email protected]> Signed-off-by: devi priya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-06-03phy: qcom: qmp-combo: Switch from V6 to V6 N4 register offsetsAbel Vesa2-29/+162
Currently, none of the X1E80100 supported boards upstream have enabled DP. As for USB, the reason it is not broken when it's obvious that the offsets are wrong is because the only difference with respect to USB is the difference in register name. The V6 uses QPHY_V6_PCS_CDR_RESET_TIME while V6 N4 uses QPHY_V6_N4_PCS_RX_CONFIG. Now, in order for the DP to work, the DP serdes tables need to be added as they have different values for V6 N4 when compared to V6 ones, even though they use the same V6 offsets. While at it, switch swing and pre-emphasis tables to V6 as well. Fixes: d7b3579f84f7 ("phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys") Co-developed-by: Kuogee Hsieh <[email protected]> Signed-off-by: Kuogee Hsieh <[email protected]> Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-3-be8a0b882117@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-06-03phy: qcom-qmp: pcs: Add missing v6 N4 register offsetsAbel Vesa1-0/+32
The new X1E80100 SoC bumps up the HW version of QMP phy to v6 N4 for combo USB and DP PHY. Currently, the X1E80100 uses the pure V6 PCS register offsets, which are different. Add the offsets so the mentioned platform can be fixed later on. Add the new PCS offsets in a dedicated header file. Fixes: d7b3579f84f7 ("phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys") Co-developed-by: Kuogee Hsieh <[email protected]> Signed-off-by: Kuogee Hsieh <[email protected]> Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-2-be8a0b882117@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-06-03phy: qcom-qmp: qserdes-txrx: Add missing registers offsetsAbel Vesa1-0/+13
Currently, the x1e80100 uses pure V6 register offsets for DP part of the combo PHY. This hasn't been an issue because external DP is not yet enabled on any of the boards yet. But in order to enabled it, all these new V6 N4 register offsets are needed. So add them. Fixes: 762c3565f3c8 ("phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets") Co-developed-by: Kuogee Hsieh <[email protected]> Signed-off-by: Kuogee Hsieh <[email protected]> Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-1-be8a0b882117@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-06-03phy: qcom-qmp-usb: Add sc8180x USB UNIPHYBjorn Andersson1-0/+3
The SC8180X platform has two UNIPHY blocks, add support for these in the QMP driver. Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-05-21Merge tag 'phy-for-6.10' of ↵Linus Torvalds8-68/+634
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull generic phy updates from Vinod Koul: "New HW Support: - Support for Embedded DisplayPort and DisplayPort submodes and driver support on Qualcomm X1E80100 edp driver - Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000 and eusb2-repeater for SMB2360 - Samsung HDMI PHY for i.MX8MP, gs101 UFS phy - Mediatek XFI T-PHY support for mt7988 - Rockchip usbdp combo phy driver Updates: - Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage swing tables - Freescale imx8m-pci pcie link-up updates - Rockchip rx-common-refclk-mode support - More platform remove callback returning void conversions" * tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits) dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000 dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000 phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p phy: samsung-ufs: ufs: exit on first reported error phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header phy: rockchip: fix CONFIG_TYPEC dependency phy: rockchip: usbdp: fix uninitialized variable phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode phy: rockchip: add usbdp combo phy driver dt-bindings: phy: add rockchip usbdp combo phy document phy: add driver for MediaTek XFI T-PHY dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5 MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101. ...
2024-05-10Merge tag 'drm-msm-next-2024-05-07' of ↵Dave Airlie1-20/+56
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.10 Core: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings (no driver changes, using SM8350 as a fallback compat) GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com
2024-05-04phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000Komal Bajaj1-0/+47
Add QDU1000/QRU1000 specific register layout and table configs. Co-developed-by: Amrit Anand <[email protected]> Signed-off-by: Amrit Anand <[email protected]> Signed-off-by: Komal Bajaj <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-05-04phy: qcom-qmp-pcie: add x4 lane EP support for sa8775pMrinmay Sarkar1-1/+8
Add support for x4 lane end point mode PHY found on sa8755p platform. Reusing existing serdes and pcs_misc table for EP and moved BIAS_EN_CLKBUFLR_EN register from RC serdes table to common serdes table as this register is part of both RC and EP. Signed-off-by: Mrinmay Sarkar <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-04-12phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6Johan Hovold3-0/+4
Commit 5abed58a8bde ("phy: qcom: qmp-combo: Fix VCO div offset on v3") fixed a regression introduced in 6.5 by making sure that the correct offset is used for the DP_PHY_VCO_DIV register on v3 hardware. Unfortunately, that fix instead broke DisplayPort on v5_5nm and v6 hardware as it failed to add the corresponding offsets also to those register tables. Fixes: 815891eee668 ("phy: qcom-qmp-combo: Introduce orientation variable") Fixes: 5abed58a8bde ("phy: qcom: qmp-combo: Fix VCO div offset on v3") Cc: [email protected] # 6.5: 5abed58a8bde Cc: Stephen Boyd <[email protected]> Cc: Abhinav Kumar <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-04-12phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5Neil Armstrong3-15/+68
Update the SM8650 UFS PHY init tables to support Gear 4 and Gear 5 using the overlays setup (only supported Gear 5 before), and sync back with the latest Qualcomm recommended values. The new recommended values allow a solid 50% bump in sequential read/write benchmarks on the SM8650 QRD & HDK reference boards. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/20240410-topic-sm8650-upstream-ufs-g5-v1-1-5527c44b37e6@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-04-12Merge branch 'fixes' into nextVinod Koul2-4/+8
This brings rockchip,pcie3-phy changes into next which incoming patches are dependent on
2024-04-07phy: qcom: m31: match requested regulator name with dt schemaGabor Juhos1-1/+1
According to the 'qcom,ipq5332-usb-hsphy.yaml' schema, the 5V supply regulator must be defined via the 'vdd-supply' property. The driver however requests for the 'vdda-phy' regulator which results in the following message when the driver is probed on a IPQ5018 based board with a device tree matching to the schema: qcom-m31usb-phy 5b000.phy: supply vdda-phy not found, using dummy regulator qcom-m31usb-phy 5b000.phy: Registered M31 USB phy This means that the regulator specified in the device tree never gets enabled. Change the driver to use the 'vdd' name for the regulator as per defined in the schema in order to ensure that the corresponding regulator gets enabled. Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Reviewed-by: Varadarajan Narayanan <[email protected]> Signed-off-by: Gabor Juhos <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-04-06phy: qcom: qmp-combo: Fix register base for QSERDES_DP_PHY_MODEStephen Boyd1-2/+2
The register base that was used to write to the QSERDES_DP_PHY_MODE register was 'dp_dp_phy' before commit 815891eee668 ("phy: qcom-qmp-combo: Introduce orientation variable"). There isn't any explanation in the commit why this is changed, so I suspect it was an oversight or happened while being extracted from some other series. Oddly the value being 0x4c or 0x5c doesn't seem to matter for me, so I suspect this is dead code, but that can be fixed in another patch. It's not good to write to the wrong register space, and maybe some other version of this phy relies on this. Cc: Douglas Anderson <[email protected]> Cc: Abhinav Kumar <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Abel Vesa <[email protected]> Cc: Steev Klimaszewski <[email protected]> Cc: Johan Hovold <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: [email protected] # 6.5 Fixes: 815891eee668 ("phy: qcom-qmp-combo: Introduce orientation variable") Signed-off-by: Stephen Boyd <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-04-06phy: qcom: qmp-combo: Fix VCO div offset on v3Stephen Boyd1-1/+5
Commit ec17373aebd0 ("phy: qcom: qmp-combo: extract common function to setup clocks") changed the offset that is used to write to DP_PHY_VCO_DIV from QSERDES_V3_DP_PHY_VCO_DIV to QSERDES_V4_DP_PHY_VCO_DIV. Unfortunately, this offset is different between v3 and v4 phys: #define QSERDES_V3_DP_PHY_VCO_DIV 0x064 #define QSERDES_V4_DP_PHY_VCO_DIV 0x070 meaning that we write the wrong register on v3 phys now. Add another generic register to 'regs' and use it here instead of a version specific define to fix this. This was discovered after Abhinav looked over register dumps with me from sc7180 Trogdor devices that started failing to light up the external display with v6.6 based kernels. It turns out that some monitors are very specific about their link clk frequency and if the default power on reset value is still there the monitor will show a blank screen or a garbled display. Other monitors are perfectly happy to get a bad clock signal. Cc: Douglas Anderson <[email protected]> Cc: Abhinav Kumar <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Fixes: ec17373aebd0 ("phy: qcom: qmp-combo: extract common function to setup clocks") Signed-off-by: Stephen Boyd <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-04-05phy: qcom: qmp-pcie: register PHY AUX clock for SM8[456]50 4x2 PCIe PHYNeil Armstrong1-0/+9
The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock, enable this second clock by setting the proper 20MHz hardware rate in the Gen4x2 SM8[456]50 aux_clock_rate config fields. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-4-3ec0a966d52f@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-04-05phy: qcom: qmp-pcie: register second optional PHY AUX clockNeil Armstrong1-3/+75
The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock, add the code to register it for PHYs configs that sets a aux_clock_rate. In order to get the right clock, add qmp_pcie_clk_hw_get() which uses the newly introduced QMP_PCIE_PIPE_CLK & QMP_PCIE_PHY_AUX_CLK clock IDs and also supports the legacy bindings by returning the PIPE clock when #clock-cells=0. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-3-3ec0a966d52f@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-04-05phy: qcom: qmp-pcie: refactor clock register codeNeil Armstrong1-4/+11
The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock, in order to expose it, split the current clock registering in two parts: - CCF clock registering - DT clock registering Keep the of_clk_add_hw_provider/devm_add_action_or_reset to keep compatibility with the legacy subnode bindings. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-2-3ec0a966d52f@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-04-05phy: qcom: qmp-combo: fix sm8650 voltage swing tableNeil Armstrong1-1/+53
The QMP USB3/DP PHY found in the SM8650 SoC requires a slightly different Voltage Swing table for HBR/RBR link speeds. Add a new hbr/rbr voltage switch table named "v6" used in a new sm8650 qmp_phy_cfg struct replacing the sm8550 fallback used for the sm8650 compatible. Fixes: 80c1afe8c5fe ("phy: qcom: qmp-combo: add QMP USB3/DP PHY tables for SM8650") Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20240226-topic-sm8650-upstream-combo-phy-swing-update-v1-1-08707ebca92a@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-03-29phy: qcom-qmp-ufs: Add SM8475 supportDanila Tikhonov1-0/+71
Add the tables and constants for init sequences for UFS QMP phy found in SM8475 SoC. Signed-off-by: Danila Tikhonov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-03-29phy: qcom: qmp-combo: fix duplicate return in qmp_v4_configure_dp_phyNeil Armstrong1-2/+0
Remove duplicate "return 0" in qmp_v4_configure_dp_phy() Fixes: 186ad90aa49f ("phy: qcom: qmp-combo: reuse register layouts for even more registers") Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/20240228-topic-sm8x50-upstream-phy-combo-fix-duplicate-return-v1-1-60027a37cab1@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-03-29phy: qcom: edp: Add v6 specific ops and X1E80100 platform supportAbel Vesa1-0/+180
Add v6 HW support by implementing the version ops. Add the X1E80100 compatible and match config as it is v6. Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-03-29phy: qcom: edp: Move v4 specific settings to version opsAbel Vesa1-65/+118
In order to support different HW versions move everything specific to v4 into so-called version ops. Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-03-29phy: qualcomm: phy-qcom-eusb2-repeater: Add support for SMB2360Abel Vesa1-0/+17
The SMB2360 PMICs contain the same repeater as the PM8550B, but requiring different settings, so add dedicated compatible for SMB2360. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/20240220-phy-qualcomm-eusb2-repeater-smb2360-v2-2-213338ca1d5f@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-03-29phy: qcom: edp: Add set_mode op for configuring eDP/DP submodeAbel Vesa1-20/+56
Future platforms should not use different compatibles to differentiate between eDP and DP mode. Instead, they should use a single compatible as the IP block is the same. It will be the job of the controller to set the submode of the PHY accordingly. The existing platforms will remain with separate compatibles for each mode. Signed-off-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/20240324-x1e80100-phy-edp-compatible-refactor-v5-2-a0db5f3150bc@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-03-16Merge tag 'phy-for-6.9' of ↵Linus Torvalds26-1197/+2025
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hardware support: - Qualcomm X1E80100 PCIe phy support, SM8550 PCIe1 PHY, SC7180 UFS PHY and SDM630 USBC support - Rockchip HDMI/eDP Combo PHY driver - Mediatek MT8365 CSI phy driver Updates: - Rework on Qualcomm phy PCS registers and type-c handling - Cadence torrent phy updates for multilink configuration - TI gmii resume support" * tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: constify of_phandle_args in xlate phy: ti: tusb1210: Define device IDs phy: ti: tusb1210: Use temporary variable for struct device phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver dt-bindings: phy: Add Rockchip HDMI/eDP Combo PHY schema phy: ti: gmii-sel: add resume support phy: mtk-mipi-csi: add driver for CSI phy dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink config for TI J7200 dt-bindings: phy: cadence-torrent: Add a separate compatible for TI J7200 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink configuration phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink configuration dt-bindings: phy: cadence-torrent: Add optional input reference clock for PLL1 phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() API dt-bindings: phy: qmp-ufs: Fix PHY clocks phy: qcom: sgmii-eth: move PCS registers to separate header phy: qcom: sgmii-eth: use existing register definitions phy: qcom: qmp-usbc: drop has_pwrdn_delay handling phy: qcom: qmp: move common bits definitions to common header phy: qcom: qmp: split DP PHY registers to separate headers ...
2024-03-06phy: qcom-qmp-combo: fix type-c switch registrationJohan Hovold1-4/+4
Due to a long-standing issue in driver core, drivers may not probe defer after having registered child devices to avoid triggering a probe deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")). Move registration of the typec switch to after looking up clocks and other resources. Note that PHY creation can in theory also trigger a probe deferral when a 'phy' supply is used. This does not seem to affect the QMP PHY driver but the PHY subsystem should be reworked to address this (i.e. by separating initialisation and registration of the PHY). Fixes: 2851117f8f42 ("phy: qcom-qmp-combo: Introduce orientation switching") Cc: [email protected] # 6.5 Cc: Bjorn Andersson <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Acked-by: Vinod Koul <[email protected]> Acked-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-03-06phy: qcom-qmp-combo: fix drm bridge registrationJohan Hovold1-4/+4
Due to a long-standing issue in driver core, drivers may not probe defer after having registered child devices to avoid triggering a probe deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")). This could potentially also trigger a bug in the DRM bridge implementation which does not expect bridges to go away even if device links may avoid triggering this (when enabled). Move registration of the DRM aux bridge to after looking up clocks and other resources. Note that PHY creation can in theory also trigger a probe deferral when a 'phy' supply is used. This does not seem to affect the QMP PHY driver but the PHY subsystem should be reworked to address this (i.e. by separating initialisation and registration of the PHY). Fixes: 35921910bbd0 ("phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE") Fixes: 1904c3f578dc ("phy: qcom-qmp-combo: Introduce drm_bridge") Cc: [email protected] # 6.5 Cc: Bjorn Andersson <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Acked-by: Vinod Koul <[email protected]> Acked-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-02-23phy: constify of_phandle_args in xlateKrzysztof Kozlowski1-1/+1
The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Thierry Reding <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Florian Fainelli <[email protected]> #Broadcom Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-02-16phy: qcom-qmp-usb: fix v3 offsets dataDmitry Baryshkov1-5/+5
The MSM8996 platform has registers setup different to the rest of QMP v3 USB platforms. It has PCS region at 0x600 and no PCS_MISC region, while other platforms have PCS region at 0x800 and PCS_MISC at 0x600. This results in the malfunctioning USB host on some of the platforms. The commit f74c35b630d4 ("phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018") fixed the issue for IPQ platforms, but missed the SDM845 which has the same register layout. To simplify future platform addition and to make the driver more future proof, rename qmp_usb_offsets_v3 to qmp_usb_offsets_v3_msm8996 (to mark its peculiarity), rename qmp_usb_offsets_ipq8074 to qmp_usb_offsets_v3 and use it for SDM845 platform. Fixes: 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration") Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-02-07phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loopAbel Vesa1-104/+62
Instead of incrementing the base of the global reg fields, which renders the second instance of the repeater broken due to wrong offsets, use regmap with base and offset. As for zeroing out the rest of the tuning regs, avoid looping though the table and just use the table as is, as it is already zero initialized. Fixes: 99a517a582fc ("phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs") Tested-by: Elliot Berman <[email protected]> # sm8650-qrd Signed-off-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/20240201-phy-qcom-eusb2-repeater-fixes-v4-1-cf18c8cef6d7@linaro.org Signed-off-by: Vinod Koul <[email protected]>
2024-02-07phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()Yang Yingliang1-1/+1
It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails. Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Varadarajan Narayanan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-02-07phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() APIManivannan Sadhasivam1-56/+7
Device drivers should just rely on the clocks provided by the devicetree and enable/disable them based on the requirement. There is no need to validate the clocks provided by devicetree in the driver. That's the job of DT schema. So let's switch to devm_clk_bulk_get_all() API that just gets the clocks provided by devicetree and remove hardcoded clocks info. Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-01-30phy: qcom: sgmii-eth: move PCS registers to separate headerDmitry Baryshkov2-37/+47
Follow the example of the rest of the QMP PHY drivers and move SGMII PCS registers to a separate header file. Cc: Bartosz Golaszewski <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2024-01-30phy: qcom: sgmii-eth: use existing register definitionsDmitry Baryshkov1-218/+149
The Qualcomm SGMII SerDes PHY is a QMP PHY. As such, it uses standard registers for QSERDES COM/RX/TX regions. Use register defines from the existing headers. Cc: Bartosz Golaszewski <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.