aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy/qualcomm
AgeCommit message (Collapse)AuthorFilesLines
2022-11-24phy: qcom-qmp-combo: fix broken power onJohan Hovold1-2/+9
The PHY is powered on during phy-init by setting the SW_PWRDN bit in the COM_POWER_DOWN_CTRL register and then setting the same bit in the in the PCS_POWER_DOWN_CONTROL register that belongs to the USB part of the PHY. Currently, whether power on succeeds depends on probe order and having the USB part of the PHY be initialised first. In case the DP part of the PHY is instead initialised first, the intended power on of the USB block results in a corrupted DP_PHY register (e.g. DP_PHY_AUX_CFG8). Add a pointer to the USB part of the PHY to the driver data and use that to power on the PHY also if the DP part of the PHY is initialised first. Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") Cc: [email protected] # 5.10 Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-24phy: qcom-qmp-combo: fix sc8180x resetJohan Hovold1-2/+2
The SC8180X has two resets but the DP configuration erroneously described only one. In case the DP part of the PHY is initialised before the USB part (e.g. depending on probe order), then only the first reset would be asserted. Fixes: 1633802cd4ac ("phy: qcom: qmp: Add SC8180x USB/DP combo") Cc: [email protected] # 5.15 Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-24phy: qcom-qmp-combo: fix sdm845 resetJohan Hovold1-1/+38
The SDM845 has two resets but the DP configuration erroneously described only one. In case the DP part of the PHY is initialised before the USB part (e.g. depending on probe order), then only the first reset would be asserted. Add a dedicated configuration for SDM845 rather than reuse the incompatible SC7180 configuration. Fixes: d88497fb6bbd ("phy: qualcomm: phy-qcom-qmp: add support for combo USB3+DP phy on SDM845") Cc: [email protected] # 6.1 Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-24phy: qcom-qmp-combo: fix out-of-bounds clock accessJohan Hovold1-2/+2
The SM8250 only uses three clocks but the DP configuration erroneously described four clocks. In case the DP part of the PHY is initialised before the USB part, this would lead to uninitialised memory beyond the bulk-clocks array to be treated as a clock pointer as the clocks are requested based on the USB configuration. Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy") Cc: [email protected] # 5.13 Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: Fix sm8450_qmp_gen4x2_pcie_pcs_tbl[] register namesManivannan Sadhasivam3-4/+19
sm8450_qmp_gen4x2_pcie_pcs_tbl[] contains the init sequence for PCS registers of QMP PHY v5.20. So use the v5.20 specific register names. Only major change is the rename of PCS_EQ_CONFIG{2/3} registers to PCS_EQ_CONFIG{4/5}. Fixes: 2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support") Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: Fix high latency with 4x2 PHY when ASPM is enabledManivannan Sadhasivam2-0/+2
The PCIe QMP 4x2 RC PHY generates high latency when ASPM is enabled. This seem to be fixed by clearing the QPHY_V5_20_PCS_PCIE_PRESET_P10_POST register of the pcs_misc register space. Fixes: 2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support") Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: split pcs_misc init cfg for ipq8074 pcs tableChristian Marangi1-4/+9
Commit af6643242d3a ("phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3") reworked the pcs regs values and removed the 0x400 offset for each pcs_misc regs. This change caused the malfunction of ipq8074 downstream since it still has the legacy pcs table where pcs_misc are not placed on a different table and instead put together assuming the offset of 0x400 for the related pcs_misc regs. Split pcs_misc init cfg from the ipq8074 pcs init table to be handled correctly to prepare for actual support for gen3 pcie for ipq8074. Fixes: af6643242d3a ("phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3") Reported-by: Robert Marko <[email protected]> Tested-by: Robert Marko <[email protected]> Signed-off-by: Christian Marangi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYsJohan Hovold2-0/+118
The PCIe2 and PCIe3 controllers and PHYs on SC8280XP can be used in 4-lane mode or as separate controllers and PHYs in 2-lane mode (e.g. as PCIe2A and PCIe2B). Add support for fetching the 4-lane configuration from the TCSR and programming the lane registers of the second port when in 4-lane mode. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: add support for sc8280xpJohan Hovold2-10/+291
Add support for the single and dual-lane PHYs found on SC8280XP. Note that the SC8280XP binding does not try to describe every register subregion and instead the driver holds the corresponding offsets. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: add support for pipediv2 clockJohan Hovold1-10/+15
Some QMP PHYs have a second fixed-divider pipe clock that needs to be enabled along with the pipe clock. Add support for an optional "pipediv2" clock. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: fix initialisation resetJohan Hovold1-0/+2
Add the missing delay after asserting reset. This is specifically needed for the reset to have any effect on SC8280XP. The vendor driver uses a 1 ms delay, but that seems a bit excessive. Instead use a 200 us delay which appears to be more than enough and also matches the UFS reset delay added by commit 870b1279c7a0 ("scsi: ufs-qcom: Add reset control support for host controller"). Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: restructure PHY creationJohan Hovold1-19/+17
In preparation for supporting devicetree bindings which do not use a child node, move the PHY creation to probe() proper and parse the serdes resource in what is now the legacy devicetree helper. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: add register init helperJohan Hovold1-29/+8
Generalise the serdes initialisation helper so that it can be used to initialise all the PHY registers (e.g. serdes, tx, rx, pcs). Note that this defers the ungating of the PIPE clock somewhat, which is fine as it isn't needed until starting the PHY. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: use shorter tables identifiersJohan Hovold1-45/+45
The QMP drivers all use 'tbl' to refer to their register initialisation tables. For consistency use 'tbls' rather than 'tables' to refer to the new aggregate table structures. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: clean up PHY lane initJohan Hovold1-6/+7
Clean up the PHY lane initialisation somewhat by adding further temporary variables and programming both tx and rx for the second lane after the first lane. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: rename PHY ops structureJohan Hovold1-8/+8
Rename the PHY operation structure so that it has a "phy_ops" suffix and move it next to the implementation. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: clean up probe initialisationJohan Hovold1-26/+23
Stop abusing the driver data pointer and instead pass the driver state structure directly to the initialisation helpers during probe. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: clean up device-tree parsingJohan Hovold1-25/+9
Since the QMP driver split there will be at most a single child node so drop the obsolete iteration construct. While at it, drop the verbose error logging that would have been printed also on probe deferrals. Note that there's no need to check if there are additional child nodes (the kernel is not a devicetree validator), but let's return an error if there are no child nodes at all for now. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: merge driver dataJohan Hovold1-130/+88
The PCIe QMP PHY driver only manages a single PHY so merge the old qcom_qmp and qmp_phy structures and drop the PHY array. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: move device-id tableJohan Hovold1-45/+45
Move the device-id table below probe() and next to the driver structure to keep the driver callback functions grouped together. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-10phy: qcom-qmp-pcie: sort device-id tableJohan Hovold1-10/+10
Sort the device-id table by compatible string to make it easier to find and add new entries. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: add support for updated sc8280xp bindingJohan Hovold1-15/+67
Add support for the new SC8280XP binding. Note that the binding does not try to describe every register subregion and instead the driver holds the corresponding offsets. This includes the PCS_USB region which was initially overlooked. Note that the driver will no longer accept the old binding due to the fixed "phy_phy" reset name. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: restructure PHY creationJohan Hovold1-24/+22
In preparation for supporting devicetree bindings which do not use a child node, move the PHY creation to probe() proper and parse the serdes and dp_com resources in what is now the legacy devicetree helper. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: clean up PHY initJohan Hovold1-5/+3
Clean up the PHY initialisation somewhat by programming both tx and rx for the second lane after the first lane. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: rename PHY ops structureJohan Hovold1-8/+8
Rename the PHY operation structure so that it has a "phy_ops" suffix and move it next to the implementation. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: clean up probe initialisationJohan Hovold1-24/+22
Stop abusing the driver data pointer and instead pass the driver state structure directly to the initialisation helpers during probe. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: clean up device-tree parsingJohan Hovold1-28/+12
Since the QMP driver split there will be at most a single child node so drop the obsolete iteration construct. While at it, drop the verbose error logging that would have been printed also on probe deferrals. Note that there's no need to check if there are additional child nodes (the kernel is not a devicetree validator), but let's return an error if there are no child nodes at all for now. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: merge driver dataJohan Hovold1-143/+96
The USB QMP PHY driver only manages a single PHY so merge the old qcom_qmp and qmp_phy structures and drop the PHY array. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: move pm opsJohan Hovold1-5/+5
Move the PM ops structure next to the implementation to keep the driver callbacks grouped. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: move device-id tableJohan Hovold1-63/+63
Move the device-id table below probe() and next to the driver structure to keep the driver callback functions grouped together. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: sort device-id tableJohan Hovold1-13/+13
Sort the device-id table by compatible string to make it easier to find and add new entries. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-11-05phy: qcom-qmp-usb: fix sc8280xp PCS_USB offsetJohan Hovold1-0/+1
The PCS_USB register block lives at an offset of 0x1000 from the PCS region on SC8280XP so add the missing offset to avoid corrupting unrelated registers on runtime suspend. Note that the current binding is broken as it does not describe the PCS_USB region and the PCS register size does not cover PCS_USB and the regions in between. As Linux currently maps full pages, simply adding the offset to driver works until the binding has been fixed. Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy") Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28Merge branch 'fixes' into nextVinod Koul1-1/+1
Merge the fixes to next as both carry qmp-phy patches
2022-10-28phy: qcom-qmp-ufs: add support for updated sc8280xp bindingJohan Hovold1-10/+80
Add support for the new SC8280XP binding. Note that the binding does not try to describe every register subregion and instead the driver holds the corresponding offsets. Also note that the driver will continue to accept the old binding, at least for the time being. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-ufs: restructure PHY creationJohan Hovold1-18/+16
In preparation for supporting devicetree bindings which do not use a child node, move the PHY creation to probe() proper and parse the serdes resource in what is now the legacy devicetree helper. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-ufs: clean up PHY initJohan Hovold1-5/+3
Clean up the PHY initialisation somewhat programming both tx and rx for the second lane after the first lane. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-ufs: rename PHY ops structureJohan Hovold1-7/+7
Rename the PHY operation structure so that it has a "phy_ops" suffix and move it next to the implementation. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-ufs: clean up probe initialisationJohan Hovold1-20/+17
Stop abusing the driver data pointer and instead pass the driver state structure directly to the initialisation helpers during probe. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-ufs: clean up device-tree parsingJohan Hovold1-15/+6
Since the QMP driver split there will be at most a single child node so drop the obsolete iteration construct. While at it, drop the verbose error logging that would have been printed also on probe deferrals. Note that there's no need to check if there are additional child nodes (the kernel is not a devicetree validator), but let's return an error if there are no child nodes at all for now. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-ufs: merge driver dataJohan Hovold1-108/+63
The UFS QMP PHY driver only manages a single PHY so merge the old qcom_qmp and qmp_phy structures and drop the PHY array. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-ufs: move device-id tableJohan Hovold1-39/+39
Move the device-id table below probe() and next to the driver structure to keep the driver callback functions grouped together. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-combo: fix NULL-deref on runtime resumeJohan Hovold1-1/+1
Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") started treating the PCS_USB registers as potentially separate from the PCS registers but used the wrong base when no PCS_USB offset has been provided. Fix the PCS_USB base used at runtime resume to prevent dereferencing a NULL pointer on platforms that do not provide a PCS_USB offset (e.g. SC7180). Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Cc: [email protected] # 5.20 Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Andrew Halaney <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHYDmitry Baryshkov1-1/+1
According to the kernel 4.4 sources from NHSS.QSDK.9.0.2 and according to hardware docs, the PHY registers layout used for IPQ8074 USB3 PHY is incorrect. This platform uses offset 0x174 for the PCS_STATUS register, 0xd8 for PCS_AUTONOMOUS_MODE_CTRL, etc. Correct the PHY registers layout. Fixes: 94a407cc17a4 ("phy: qcom-qmp: create copies of QMP PHY driver") Fixes: 507156f5a99f ("phy: qcom-qmp: Add USB QMP PHY support for IPQ8074") Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Kathiravan T<[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstractionJohan Hovold1-56/+5
Drop the start and pwrdn-ctrl abstractions which are no longer needed since the QMP driver split. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-ufs: drop start and pwrdn-ctrl abstractionJohan Hovold1-28/+7
Drop the start and pwrdn-ctrl abstractions which are no longer needed since the QMP driver split. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-pcie-msm8996: drop start and pwrdn-ctrl abstractionJohan Hovold1-10/+7
Drop the start and pwrdn-ctrl abstractions which are no longer needed since the QMP driver split. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-pcie: add config sanity checksJohan Hovold1-0/+3
The driver expects every configuration to set the pwrdn_ctrl and phy_status masks. Add some probe WARN_ON_ONCE() to probe to catch any new driver support that fails to provide them. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-pcie: drop start-ctrl abstractionJohan Hovold1-15/+3
All PCIe PHYs need to start and stop the SerDes and PCS so drop the start-ctrl abstraction which is no longer needed since the QMP driver split. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-combo: drop start and pwrdn-ctrl abstractionJohan Hovold1-23/+6
All USB PHYs need to start and stop the SerDes and PCS so drop the start-ctrl abstraction which is no longer needed since the QMP driver split. Similarly, drop the pwrdn-ctrl abstraction which also is not needed since the split. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-10-28phy: qcom-qmp-usb: increase status polling periodJohan Hovold1-1/+1
It typically takes between one and two milliseconds for the PHY to become ready after starting it. Increase the tight 3--10 us polling period to the more reasonable 51--200 us. Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.