aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy/marvell/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-04-06phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMONRandy Dunlap1-1/+1
When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi suffers a build error due to a missing interface that is provided by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON. ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe': phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy' Signed-off-by: Randy Dunlap <[email protected]> Cc: Kostya Porotchkin <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Cc: Vinod Koul <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-03-30phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionallyGeert Uytterhoeven1-2/+2
Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY to MACH_ARMADA_375, and ask the user in case of compile-testing. Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-03-30drivers: phy: add support for Armada CP110 UTMI PHYKonstantin Porotchkin1-0/+8
Add support for Marvell CP110 UTMI PHY driver allowing the USB2 port configuration independently from the boot loader setup. The CP110/CP115 dies have 2 UTMI PHYs that could be connected to two USB host controllers or to single USB device controller. Since there is only one USB device controller on die, only one of the UTMI PHYs could work in USB device mode. The CONFIG_PHY_MVEBU_CP110_UTMI should be enabled for usage of this driver. Signed-off-by: Konstantin Porotchkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-11-02phy: Add USB HSIC PHY driver for Marvell MMP3 SoCLubomir Rintel1-0/+12
Add PHY driver for the HSICs found on Marvell MMP3 SoC. The driver is rather straightforward -- the PHY essentially just needs to be enabled. Signed-off-by: Lubomir Rintel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-01-06phy: Enable compile testing for some of driversKrzysztof Kozlowski1-3/+5
Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-10-17phy: Add USB2 PHY driver for Marvell MMP3 SoCLubomir Rintel1-0/+11
Add PHY driver for the USB2 PHY found on Marvell MMP3 SoC. Signed-off-by: Lubomir Rintel <[email protected]> Acked-by: Kishon Vijay Abraham I <[email protected]>
2019-08-27phy: mvebu-cp110-comphy: Add SMC call supportGrzegorz Jaszczyk1-0/+1
Keep the exact same list of supported configurations but first try to use the firmware's implementation. If it fails, try the legacy method: Linux implementation. Signed-off-by: Grzegorz Jaszczyk <[email protected]> [[email protected]: adapt the content to the mainline driver] Signed-off-by: Miquel Raynal <[email protected]> Tested-by: Maxime Chevallier <[email protected]> Tested-by: Grzegorz Jaszczyk <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-03-06Merge tag 'usb-5.1-rc1' of ↵Linus Torvalds1-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...
2019-02-07phy: armada38x: add common phy supportRussell King1-0/+10
Add support for the Armada 38x common phy to allow us to change the speed of the Ethernet serdes lane. This driver only supports manipulation of the speed, it does not support configuration of the common phy. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-02-07phy: add A3700 UTMI PHY driverMiquel Raynal1-0/+9
Marvell Armada 3700 SoC has two USB controllers, each of them being wired to an internal UTMI PHY. Add a driver to control them. Igal Liberman worked on supporting the PHY, I took the while 'register configuration' from his work and rewrote almost entirely the driver/bindings around it. Co-developed-by: Igal Liberman <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Igal Liberman <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2019-02-07phy: add A3700 COMPHY supportMiquel Raynal1-0/+12
Add a driver to support COMPHY, a hardware block providing shared serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and rely on having an up-to-date firmware. SATA, PCie and USB3 host mode have been tested successfully with an ESPRESSObin. (HS)SGMII mode cannot be tested with this platform. Evan worked on the original driver structure and Grzegorz on the SMC calls rework. The structure of this driver has been copied from Antoine Tenart work on CP110 COMPHY driver. Signed-off-by: Miquel Raynal <[email protected]> Co-developed-by: Evan Wang <[email protected]> Signed-off-by: Evan Wang <[email protected]> Co-developed-by: Grzegorz Jaszczyk <[email protected]> Signed-off-by: Grzegorz Jaszczyk <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2018-10-18phy: phy-pxa-usb: add a new driverLubomir Rintel1-0/+11
Turned from arch/arm/mach-mmp/devices.c into a proper PHY driver, so that in can be instantiated from a DT. Acked-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-08-30phy: add the mvebu cp110 comphy driverAntoine Tenart1-0/+11
On the CP110 unit, which can be found on various Marvell platforms such as the 7k and 8k (currently), a comphy (common PHYs) hardware block can be found. This block provides a number of PHYs which can be used in various modes by other controllers (network, SATA ...). These common PHYs must be configured for the controllers using them to work correctly either at boot time, or when the system runs to switch the mode used. This patch adds a driver for this comphy hardware block, providing callbacks for the its PHYs so that consumers can configure the modes used. As of this commit, two modes are supported by the comphy driver: sgmii and 10gkr. Signed-off-by: Antoine Tenart <[email protected]> Acked-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-01phy: Group vendor specific phy driversVivek Gautam1-0/+50
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <[email protected]> Acked-by: Heiko Stuebner <[email protected]> Acked-by: Viresh Kumar <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Acked-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Cc: David S. Miller <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Yoshihiro Shimoda <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Viresh Kumar <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Cc: Sylwester Nawrocki <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Jaehoon Chung <[email protected]> Cc: Stephen Boyd <[email protected]> Cc: Martin Blumenstingl <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.