aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy/broadcom/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-08-15arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCAWilliam Zhang1-2/+2
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <[email protected]> Acked-by: Guenter Roeck <[email protected]> (for watchdog) Acked-by: Bjorn Helgaas <[email protected]> (for drivers/pci) Acked-by: Wolfram Sang <[email protected]> (for i2c) Acked-by: Philipp Zabel <[email protected]> (for reset) Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]>
2022-07-08phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCAWilliam Zhang1-1/+1
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make PHY_BRCM_SATA depending on ARCH_BCMBCA. Signed-off-by: William Zhang <[email protected]> Acked-by: Vinod Koul <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2022-01-23phy: broadcom: Kconfig: Fix PHY_BRCM_USB config optionAl Cooper1-2/+1
The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") added a second "default" line for ARCH_BCM_4908 above the original "default" line for ARCH_BRCMSTB. When two "default" lines are used, only the first is used and this change stopped the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB. The fix is to use one "default line with "||". Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") Signed-off-by: Al Cooper <[email protected]> Acked-by: Rafał Miłecki <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-10-01phy: broadcom: Kconfig: Add configuration menu for Broadcom phy driversCai Huoqing1-0/+4
Adding a configuration menu to hold many Broadcom phy drivers helps to make the menu display more concise. Signed-off-by: Cai Huoqing <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-03-15phy: phy-brcm-usb: select SOC_BRCMSTB on brcmstb onlyRafał Miłecki1-1/+1
phy-brcm-usb has some conditional init code required on selected brcmstb devices. Execution of that code depends on family / product detected by brcmstb soc code. For ARCH_BCM4908 brcmstb soc code always return 0 values as ids. Don't bother selecting & compiling that redundant driver. Depends-on: 149ae80b1d50 ("soc: bcm: brcmstb: add stubs for getting platform IDs") Signed-off-by: Rafał Miłecki <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-01-13phy: phy-brcm-usb: support PHY on the BCM4908Rafał Miłecki1-1/+2
BCM4908 seems to have slightly different registers but works when programmed just like the STB one. Signed-off-by: Rafał Miłecki <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-07-21phy: bcm63xx-usbh: Add BCM63xx USBH driverÁlvaro Fernández Rojas1-0/+8
Add BCM63xx USBH PHY driver for BMIPS. Signed-off-by: Álvaro Fernández Rojas <[email protected]> Signed-off-by: Simon Arlott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-01-06phy: Enable compile testing for some of driversKrzysztof Kozlowski1-2/+2
Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-04-17phy: sr-usb: Add Stingray USB PHY driverSrinath Mannam1-0/+11
USB PHY driver supports two types of stingray USB PHYs - Type 1 is a combo PHY contains two PHYs, one SS and one HS. - Type 2 is a single HS PHY. These two PHY versons support both Generic xHCI host controller driver and BDC Broadcom device controller driver. Signed-off-by: Srinath Mannam <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2018-09-25phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCsFlorian Fainelli1-1/+2
Broadcom ARM-based DSL SoCs (BCM63xx product line) have the same Broadcom SATA PHY that other SoCs are using, make it possible to select that driver on these platforms. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2018-07-10phy: bcm-sr-pcie: Add Stingray PCIe PHY driverRay Jui1-0/+10
Add Stingray PCIe PHY driver for both PAXB and PAXC root complex Signed-off-by: Ray Jui <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2017-10-03phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driverAl Cooper1-0/+13
Add a new USB Phy driver for Broadcom STB SoCs. This driver supports Broadcom STB ARM SoCs. This driver in combination with the Broadcom STB ohci, ehci and xhci drivers will enable USB1.1, USB2.0 and USB3.0 support. This Phy driver also supports the Broadcom BDC gadget driver. Signed-off-by: Al Cooper <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2017-07-27phy: bcm-ns-usb3: fix MDIO_BUS dependencyArnd Bergmann1-1/+1
The driver attempts to 'select MDIO_DEVICE', but the code is actually a loadable module when PHYLIB=m: drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_mdiodev_phy_write': phy-bcm-ns-usb3.c:(.text.bcm_ns_usb3_mdiodev_phy_write+0x28): undefined reference to `mdiobus_write' drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_exit': phy-bcm-ns-usb3.c:(.exit.text+0x18): undefined reference to `mdio_driver_unregister' drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_init': phy-bcm-ns-usb3.c:(.init.text+0x18): undefined reference to `mdio_driver_register' phy-bcm-ns-usb3.c:(.init.text+0x38): undefined reference to `mdio_driver_unregister' Using 'depends on MDIO_BUS' instead will avoid the link error. Fixes: af850e14a7ae ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-16phy: bcm-ns-usb3: add MDIO driver using proper bus layerRafał Miłecki1-0/+1
As USB 3.0 PHY is attached to the MDIO bus this module should provide a MDIO driver and use a proper bus layer. This is a proper (cleaner) solution which doesn't require code to know this specific MDIO bus details. It also allows reusing the driver with other MDIO buses. For now keep platform device support in place. We may consider dropping it once MDIO bindings gets used "everywhere". Signed-off-by: Rafał Miłecki <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2017-06-09phy: phy-bcm-ns2-usbdrd: Broadcom USB DRD PHY driver for Northstar2Raviteja Garimella1-0/+13
This is driver for USB DRD PHY used in Broadcom's Northstar2 SoC. The phy can be configured to be in Device mode or Host mode based on the type of cable connected to the port. The driver registers to extcon framework to get appropriate connect events for Host/Device cables connect/disconnect states based on VBUS and ID interrupts. Signed-off-by: Raviteja Garimella <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
2017-06-01phy: Group vendor specific phy driversVivek Gautam1-0/+55
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <[email protected]> Acked-by: Heiko Stuebner <[email protected]> Acked-by: Viresh Kumar <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Acked-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Cc: David S. Miller <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Yoshihiro Shimoda <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Viresh Kumar <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Cc: Sylwester Nawrocki <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Jaehoon Chung <[email protected]> Cc: Stephen Boyd <[email protected]> Cc: Martin Blumenstingl <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.