aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc/pcie-designware-host.c
AgeCommit message (Collapse)AuthorFilesLines
2020-11-04PCI: dwc: Restore ATU memory resource setup to use last entryRob Herring1-2/+6
Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"), the DWC driver was setting up the last memory resource rather than the first memory resource. This doesn't matter for most platforms which only have 1 memory resource, but it broke Tegra194 which has a 2nd (prefetchable) memory region that requires an ATU entry. The first region on Tegra194 relies on the default 1:1 pass-thru of outbound transactions and doesn't need an ATU entry. Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources") Link: https://lore.kernel.org/r/[email protected] Reported-by: Vidya Sagar <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Lorenzo Pieralisi <[email protected]> Acked-by: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-10-20PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()Hou Zhiqiang1-0/+11
NXP Layerscape (ls1028a, ls2088a), dra7xxx and imx6 platforms are either programmed or statically configured to forward the error triggered by a link-down state (eg no connected endpoint device) on the system bus for PCI configuration transactions; these errors are reported as an SError at system level, which is fatal. Enumerating a PCI tree when the PCIe link is down is not sensible either, so even if the link-up check is racy (link can go down after map_bus() is called) add a link-up check in map_bus() to prevent issuing configuration transactions when the link is down. SError report: SError Interrupt on CPU2, code 0xbf000002 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67 Hardware name: LS1046A RDB Board (DT) pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) pc : pci_generic_config_read+0x3c/0xe0 lr : pci_generic_config_read+0x24/0xe0 sp : ffff80001003b7b0 x29: ffff80001003b7b0 x28: ffff80001003ba74 x27: ffff000971d96800 x26: ffff00096e77e0a8 x25: ffff80001003b874 x24: ffff80001003b924 x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000000 x20: ffff80001003b874 x19: 0000000000000004 x18: ffffffffffffffff x17: 00000000000000c0 x16: fffffe0025981840 x15: ffffb94c75b69948 x14: 62203a383634203a x13: 666e6f635f726568 x12: 202c31203d207265 x11: 626d756e3e2d7375 x10: 656877202c307830 x9 : 203d206e66766564 x8 : 0000000000000908 x7 : 0000000000000908 x6 : ffff800010900000 x5 : ffff00096e77e080 x4 : 0000000000000000 x3 : 0000000000000003 x2 : 84fa3440ff7e7000 x1 : 0000000000000000 x0 : ffff800010034000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67 Hardware name: LS1046A RDB Board (DT) Call trace: dump_backtrace+0x0/0x1c0 show_stack+0x18/0x28 dump_stack+0xd8/0x134 panic+0x180/0x398 add_taint+0x0/0xb0 arm64_serror_panic+0x78/0x88 do_serror+0x68/0x180 el1_error+0x84/0x100 pci_generic_config_read+0x3c/0xe0 dw_pcie_rd_other_conf+0x78/0x110 pci_bus_read_config_dword+0x88/0xe8 pci_bus_generic_read_dev_vendor_id+0x30/0x1b0 pci_bus_read_dev_vendor_id+0x4c/0x78 pci_scan_single_device+0x80/0x100 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hou Zhiqiang <[email protected]> [[email protected]: rewrote the commit log, remove Fixes tag] Signed-off-by: Lorenzo Pieralisi <[email protected]>
2020-10-13PCI: dwc: Fix MSI page leakage in suspend/resumeJisheng Zhang1-15/+18
Currently, dw_pcie_msi_init() allocates and maps page for msi, then program the PCIE_MSI_ADDR_LO and PCIE_MSI_ADDR_HI. The Root Complex may lose power during suspend-to-RAM, so when we resume, we want to redo the latter but not the former. If designware based driver (for example, pcie-tegra194.c) calls dw_pcie_msi_init() in resume path, the msi page will be leaked. As pointed out by Rob and Ard, there's no need to allocate a page for the MSI address, we could use an address in the driver data. To avoid map the MSI msg again during resume, we move the map MSI msg from dw_pcie_msi_init() to dw_pcie_host_init(). Suggested-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]>
2020-10-13PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabledJisheng Zhang1-1/+1
If MSI is disabled, there's no need to program PCIE_MSI_INTR0_MASK and PCIE_MSI_INTR0_ENABLE registers. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2020-09-10PCI: dwc: Centralize link gen settingRob Herring1-0/+3
keystone would force gen2 if no DT property. Now it relies on the PCI_EXP_LNKCAP value. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Richard Zhu <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Stanimir Varbanov <[email protected]> Cc: Andy Gross <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected]
2020-09-08PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init()Rob Herring1-0/+3
Move the IS_ENABLED(CONFIG_PCI_MSI) check into dw_pcie_msi_init() instead of duplicating it in all the drivers. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Richard Zhu <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Yue Wang <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Jesper Nilsson <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Xiaowei Song <[email protected]> Cc: Binghui Wang <[email protected]> Cc: Stanimir Varbanov <[email protected]> Cc: Andy Gross <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Kunihiko Hayashi <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected]
2020-09-08PCI: dwc: Simplify config space handlingRob Herring1-43/+20
The config space is divided in half for type 0 and type 1 accesses, but this is pointless as there's only one iATU window which is reconfigured on each access. The only platform doing something custom is TI Keystone (surprise!). It does its own mapping of the config space to avoid spliting the config space and never actually uses va_cfg1_base as it has its own config space accessors. With the splitting removed, Keystone can use the default mapping of config space. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-09-08PCI: dwc: Remove storing of PCI resourcesRob Herring1-18/+9
The PCI bridge resources are stored in pci_host_bridge.windows, so there's no need to store them in a DWC specific struct. There's also no need to parse the resources and store them a 2nd time as they are mainly used for one time setup of iATU windows. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Jonathan Chocron <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-09-08PCI: dwc: Remove root_bus pointerRob Herring1-2/+2
The pci_host_bridge struct already has a pointer to its pci_bus, so let's convert the one user to use the bridge struct and remove the private 'root_bus' pointer. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: [email protected]
2020-09-08PCI: dwc: Convert to use pci_host_probe()Rob Herring1-18/+3
Now that there are no more .scan_bus() callbacks, we can remove it and just use pci_host_probe(). Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: Use generic config accessorsRob Herring1-82/+37
Now that all the platforms with custom config access handling define their own pci_ops, let's split the default config accessors to use different pci_ops for root and child buses. With this, we can use the generic config accessors. The child bus accesses mainly require a .map_bus() hook to reconfigure the iATU on each config space access. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: Remove dwc specific config accessor opsRob Herring1-14/+0
Now that all the drivers needing custom config accessors have been converted to define their own pci_ops, we can remove the DWC specific function callbacks {rd,wr}_{own,other}_conf. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: Add a default pci_ops.map_bus for root portRob Herring1-0/+12
The Designware root port config space is memory mapped accesses via the DBI space by default. Add a common implementation dw_pcie_own_conf_map_bus() for platforms to use. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-07PCI: dwc: Allow overriding bridge pci_opsRob Herring1-5/+10
In preparation to allow drivers to set their own root and child pci_ops instead of using the DWC specific config space ops, we need to make the pci_host_bridge pointer available and move setting the bridge->ops and bridge->child_ops pointer to before the .host_init() hook. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-07PCI: dwc: Use DBI accessors instead of own config accessorsRob Herring1-36/+19
The Designware DBI space contains the root bus bridge config space. Platforms needing custom {rd,wr}_own_conf functions are also the ones needing custom {read,write}_dbi ops functions and the access sequences are the same. Replace all dw_pcie_{rd,wr}_own_conf() calls with the DBI variants in preparation to remove dw_pcie_{rd,wr}_own_conf(). Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-08-05Merge branch 'pci/host-probe-refactor'Bjorn Helgaas1-19/+6
- Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Convert to devm_platform_ioremap_resource_byname() instead of open-coding platform_get_resource_byname() and devm_ioremap_resource() for altera, cadence, mediatek, rockchip, tegra, xgene (Dejin Zheng) - Convert to devm_platform_ioremap_resource() instead of open-coding platform_get_resource() and devm_ioremap_resource() for aardvark, brcmstb, exynos, ftpci100, versatile (Dejin Zheng) - Remove redundant error messages from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Drop useless PCI_ENABLE_PROC_DOMAINS from versatile driver (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Drop unnecessary zeroing of host bridge fields (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Use bridge resources instead of parsing DT 'ranges' again for cadence (Rob Herring) - Remove private bus number and range from cadence (Rob Herring) - Use devm_pci_alloc_host_bridge() to simplify rcar (Rob Herring) - Use struct pci_host_bridge.windows list directly rather than a temporary (Rob Herring) - Reduce OF "missing non-prefetchable window" from error to warning message (Rob Herring) - Convert rcar-gen2 from old Arm-specific pci_common_init_dev() to new arch-independent interfaces (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) * pci/host-probe-refactor: PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: of: Reduce missing non-prefetchable memory region to a warning PCI: rcar: Use struct pci_host_bridge.windows list directly PCI: rcar: Use devm_pci_alloc_host_bridge() PCI: cadence: Remove private bus number and range storage PCI: cadence: Use bridge resources for outbound window setup PCI: Move setting pci_host_bridge.busnr out of host drivers PCI: rcar: Use pci_is_root_bus() to check if bus is root bus PCI: rockchip: Use pci_is_root_bus() to check if bus is root bus PCI: xilinx: Use pci_is_root_bus() to check if bus is root bus PCI: xilinx-nwl: Use pci_is_root_bus() to check if bus is root bus PCI: mobiveil: Use pci_is_root_bus() to check if bus is root bus PCI: designware: Use pci_is_root_bus() to check if bus is root bus PCI: aardvark: Use pci_is_root_bus() to check if bus is root bus PCI: Drop unnecessary zeroing of bridge fields PCI: Set default bridge parent device PCI: versatile: Drop flag PCI_ENABLE_PROC_DOMAINS PCI: controller: Remove duplicate error message PCI: controller: Convert to devm_platform_ioremap_resource() PCI: controller: Convert to devm_platform_ioremap_resource_byname() PCI: xilinx: Use pci_host_probe() to register host PCI: xilinx-nwl: Use pci_host_probe() to register host PCI: rockchip: Use pci_host_probe() to register host PCI: rcar: Use pci_host_probe() to register host PCI: iproc: Use pci_host_probe() to register host PCI: altera: Use pci_host_probe() to register host PCI: xgene: Use pci_host_probe() to register host PCI: versatile: Use pci_host_probe() to register host PCI: v3: Use pci_host_probe() to register host PCI: tegra: Use pci_host_probe() to register host PCI: mobiveil: Use pci_host_probe() to register host PCI: brcmstb: Use pci_host_probe() to register host PCI: host-common: Use struct pci_host_bridge.windows list directly PCI: mvebu: Use struct pci_host_bridge.windows list directly PCI: cadence: Use struct pci_host_bridge.windows list directly # Conflicts: # drivers/pci/controller/cadence/pcie-cadence-host.c
2020-08-04PCI: Set bridge map_irq and swizzle_irq to default functionsRob Herring1-2/+0
The majority of DT based host drivers use the default .map_irq() and .swizzle_irq() functions, so let's initialize the function pointers to the default and drop setting them in the host drivers. Drivers like iProc which don't support legacy interrupts need to set .map_irq() back to NULL. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-08-04PCI: Move DT resource setup into devm_pci_alloc_host_bridge()Rob Herring1-5/+0
Now that pci_parse_request_of_pci_ranges() callers just setup pci_host_bridge.windows and dma_ranges directly and don't need the bus range returned, we can just initialize them when allocating the pci_host_bridge struct. With this, pci_parse_request_of_pci_ranges() becomes a static function. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-07-23PCI: Move setting pci_host_bridge.busnr out of host driversRob Herring1-1/+0
Most host drivers only parse the DT bus range to set the root bus number in pci_host_bridge.busnr. The ones that don't set busnr are buggy in that they ignore what's in DT. Let's set busnr in pci_scan_root_bus_bridge() where we already check for the bus resource and remove setting it in host drivers. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Thomas Petazzoni <[email protected]> Cc: Will Deacon <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Ryder Lee <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Yoshihiro Shimoda <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected]
2020-07-23PCI: designware: Use pci_is_root_bus() to check if bus is root busRob Herring1-11/+7
Use pci_is_root_bus() rather than tracking the root bus number to determine if the bus is the root bus or not. This removes storing duplicated data as well as the need for the host bridge driver to have to care about the bus numbers in most cases. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: Richard Zhu <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-07-23PCI: Set default bridge parent deviceRob Herring1-1/+0
The host bridge's parent device is always the platform device. As we already have a pointer to it in the devres functions, let's initialize the parent device. Drivers can still override the parent if desired. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-06-30PCI: Replace http:// links with https://Alexander A. Klimov1-1/+1
Replace http:// links with https:// links. This reduces the likelihood of man-in-the-middle attacks when developers open these links. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. [bhelgaas: also update samsung.com links, drop sourceforge link] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-05-22PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_portKishon Vijay Abraham I1-1/+1
No functional change. Get "struct pcie_port *" from private data pointer of "struct irq_domain" in dw_pcie_irq_domain_free() to make it look similar to how "struct pcie_port *" is obtained in dw_pcie_irq_domain_alloc() Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2020-05-22PCI: dwc: Fix inner MSI IRQ domain registrationMarc Zyngier1-0/+2
On a system that uses the internal DWC MSI widget, I get this warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected: debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present! This is due to the fact that the DWC MSI code tries to register two IRQ domains for the same firmware node, without telling the low level code how to distinguish them (by setting a bus token). This further confuses debugfs which tries to create corresponding files for each domain. Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is the closest thing we have as to "generic MSI". Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Jingoo Han <[email protected]>
2019-11-28Merge branch 'remotes/lorenzo/pci/mmio-dma-ranges'Bjorn Helgaas1-20/+9
- Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) * remotes/lorenzo/pci/mmio-dma-ranges: PCI: Make devm_of_pci_get_host_bridge_resources() static PCI: rcar: Use inbound resources for setup PCI: iproc: Use inbound resources for setup PCI: xgene: Use inbound resources for setup PCI: v3-semi: Use inbound resources for setup PCI: ftpci100: Use inbound resources for setup PCI: of: Add inbound resource parsing to helpers PCI: versatile: Enable COMPILE_TEST PCI: versatile: Remove usage of PHYS_OFFSET PCI: versatile: Use pci_parse_request_of_pci_ranges() PCI: xilinx-nwl: Use pci_parse_request_of_pci_ranges() PCI: xilinx: Use pci_parse_request_of_pci_ranges() PCI: xgene: Use pci_parse_request_of_pci_ranges() PCI: v3-semi: Use pci_parse_request_of_pci_ranges() PCI: rockchip: Drop storing driver private outbound resource data PCI: rockchip: Use pci_parse_request_of_pci_ranges() PCI: mobiveil: Use pci_parse_request_of_pci_ranges() PCI: mediatek: Use pci_parse_request_of_pci_ranges() PCI: iproc: Use pci_parse_request_of_pci_ranges() PCI: faraday: Use pci_parse_request_of_pci_ranges() PCI: dwc: Use pci_parse_request_of_pci_ranges() PCI: altera: Use pci_parse_request_of_pci_ranges() PCI: aardvark: Use pci_parse_request_of_pci_ranges() PCI: Export pci_parse_request_of_pci_ranges() resource: Add a resource_list_first_type helper # Conflicts: # drivers/pci/controller/pcie-rcar.c
2019-11-28Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas1-5/+6
- Fix dwc find_next_bit() usage (Niklas Cassel) * remotes/lorenzo/pci/dwc: PCI: dwc: Fix find_next_bit() usage
2019-11-21PCI: Remove unused includes and superfluous struct declarationKrzysztof Wilczynski1-0/+1
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part of the include/linux/of_pci.h, and remove superfluous declaration of struct of_phandle_args. Move users of include <linux/of_pci.h> to include <linux/pci.h> and <linux/msi.h> directly rather than rely on both being included transitively through <linux/of_pci.h>. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Wilczynski <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Rob Herring <[email protected]>
2019-11-20PCI: of: Add inbound resource parsing to helpersRob Herring1-1/+2
Extend devm_of_pci_get_host_bridge_resources() and pci_parse_request_of_pci_ranges() helpers to also parse the inbound addresses from DT 'dma-ranges' and populate a resource list with the translated addresses. This will help ensure 'dma-ranges' is always parsed in a consistent way. Tested-by: Srinath Mannam <[email protected]> Tested-by: Thomas Petazzoni <[email protected]> # for AArdvark Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Srinath Mannam <[email protected]> Reviewed-by: Andrew Murray <[email protected]> Acked-by: Gustavo Pimentel <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Thomas Petazzoni <[email protected]> Cc: Will Deacon <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Toan Le <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Tom Joseph <[email protected]> Cc: Ray Jui <[email protected]> Cc: Scott Branden <[email protected]> Cc: [email protected] Cc: Ryder Lee <[email protected]> Cc: Karthikeyan Mitran <[email protected]> Cc: Hou Zhiqiang <[email protected]> Cc: Simon Horman <[email protected]> Cc: Shawn Lin <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Michal Simek <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected]
2019-10-29PCI: dwc: Use pci_parse_request_of_pci_ranges()Rob Herring1-20/+8
Convert the Designware host bridge to use the common pci_parse_request_of_pci_ranges(). Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Andrew Murray <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2019-10-15PCI: dwc: Fix find_next_bit() usageNiklas Cassel1-5/+6
find_next_bit() takes a parameter of size long, and performs arithmetic that assumes that the argument is of size long. Therefore we cannot pass a u32, since this will cause find_next_bit() to read outside the stack buffer and will produce the following print: BUG: KASAN: stack-out-of-bounds in find_next_bit+0x38/0xb0 Fixes: 1b497e6493c4 ("PCI: dwc: Fix uninitialized variable in dw_handle_msi_irq()") Tested-by: Bjorn Andersson <[email protected]> Signed-off-by: Niklas Cassel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Andrew Murray <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-09-23Merge branch 'lorenzo/pci/tegra'Bjorn Helgaas1-6/+8
- Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak
2019-09-16PCI: dwc: Add validation that PCIe core is set to correct modeJonathan Chocron1-0/+16
Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Andrew Murray <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-08-13PCI: dwc: Group DBI registers writes requiring unlockingVidya Sagar1-6/+8
Some of DesignWare core's DBI registers (a.k.a configuration space registers) are write-protected with a lock without enabling which they are read-only by default. These write-protected registers are implementation specific. Tegra194's BAR-0 register which is at offset 0x10 in the configuration space is an example. Current implementation in dw_pcie_setup_rc() API attempts to unlock those write-protected registers whenever they are updated and lock them back again for writing. Group all write-protected registers writes so that locking and unlocking is performed once to avoid bloating the code with multiple unlock/lock sequences for all those write-protected registers. Signed-off-by: Vidya Sagar <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Thierry Reding <[email protected]> Acked-by: Jingoo Han <[email protected]>
2019-06-27PCI: dwc: Export APIs to support .remove() implementationVidya Sagar1-0/+4
Export all configuration space access APIs and also other APIs to support host controller drivers of dwc core based implementations while adding support for .remove() hook to build their respective drivers as modules. Signed-off-by: Vidya Sagar <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-06-27PCI: dwc: Add API support to de-initialize hostVidya Sagar1-0/+8
Add an API to group all the tasks to be done to de-initialize host which can then be called by any dwc core based driver implementations while adding .remove() support in their respective drivers. Signed-off-by: Vidya Sagar <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-05-13Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas1-67/+30
- Move IRQ register address computation inside macros (Kishon Vijay Abraham I) - Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I) - Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham I) - Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon Vijay Abraham I) - Add dwc support for platforms with custom MSI controllers (Kishon Vijay Abraham I) - Add keystone-specific MSI controller (Kishon Vijay Abraham I) - Remove dwc host_ops previously used for keystone-specific MSI (Kishon Vijay Abraham I) - Skip dwc default MSI init if platform has custom MSI controller (Kishon Vijay Abraham I) - Implement .start_link() and .stop_link() for keystone endpoint support (Kishon Vijay Abraham I) - Add keystone "reg-names" DT binding (Kishon Vijay Abraham I) - Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon Vijay Abraham I) - Get keystone register resources from DT by name, not index (Kishon Vijay Abraham I) - Get DT resources in .probe() to prepare for endpoint support (Kishon Vijay Abraham I) - Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration (Kishon Vijay Abraham I) - Explicitly set keystone to host mode (Kishon Vijay Abraham I) - Document DT "atu" reg-names requirement for DesignWare core >= 4.80 (Kishon Vijay Abraham I) - Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon Vijay Abraham I) - Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon Vijay Abraham I) - Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham I) - Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham I) - Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I) - Reset keystone PHYs before enabling them (Kishon Vijay Abraham I) - Make of_pci_get_max_link_speed() available to endpoint drivers as well as host drivers (Kishon Vijay Abraham I) - Add keystone support for DT "max-link-speed" property (Kishon Vijay Abraham I) - Add endpoint library support for BAR buffer alignment (Kishon Vijay Abraham I) - Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I) - Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay Abraham I) - Add dwc hooks for dbi/dbi2 that share the same address space (Kishon Vijay Abraham I) - Add keystone support for TI AM654x in endpoint mode (Kishon Vijay Abraham I) - Configure designware endpoints to advertise smallest resizable BAR (1MB) (Kishon Vijay Abraham I) - Align designware endpoint ATU windows for raising MSIs (Kishon Vijay Abraham I) - Add endpoint test support for TI AM654x (Kishon Vijay Abraham I) - Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test misc: pci_endpoint_test: Add support to test PCI EP in AM654x PCI: designware-ep: Use aligned ATU window for raising MSI interrupts PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size PCI: keystone: Add support for PCIe EP in AM654x Platforms dt-bindings: PCI: Add PCI EP DT binding documentation for AM654 PCI: dwc: Add callbacks for accessing dbi2 address space PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops PCI: endpoint: Add support to specify alignment for buffers allocated to BARs PCI: keystone: Add support to set the max link speed from DT PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers PCI: keystone: Invoke phy_reset() API before enabling PHY PCI: keystone: Add support for PCIe RC in AM654x Platforms dt-bindings: PCI: Add PCI RC DT binding documentation for AM654 PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 PCI: dwc: Fix ATU identification for designware version >= 4.80 PCI: dwc: Enable iATU unroll for endpoint too dt-bindings: PCI: Document "atu" reg-names PCI: keystone: Explicitly set the PCIe mode dt-bindings: PCI: Add dt-binding to configure PCIe mode PCI: keystone: Move resources initialization to prepare for EP support PCI: keystone: Use platform_get_resource_byname() to get memory resources PCI: keystone: Perform host initialization in a single function dt-bindings: PCI: keystone: Add "reg-names" binding information PCI: keystone: Cleanup error_irq configuration PCI: keystone: Add start_link()/stop_link() dw_pcie_ops PCI: dwc: Remove default MSI initialization for platform specific MSI chips PCI: dwc: Remove Keystone specific dw_pcie_host_ops PCI: keystone: Use Keystone specific msi_irq_chip PCI: dwc: Add support to use non default msi_irq_chip PCI: keystone: Cleanup ks_pcie_msi_irq_handler() PCI: keystone: Use hwirq to get the MSI IRQ number offset PCI: keystone: Add separate functions for configuring MSI and legacy interrupt PCI: keystone: Cleanup interrupt related macros # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h
2019-05-07PCI: dwc: Save root bus for driver remove hooksJisheng Zhang1-6/+6
Currently DWC host does not support the remove callback, but nothing prevents us from supporting it. Save the root bus for clean up work in driver remove code paths to allow DWC host drivers to implement their remove hook as, eg: static int foo_pcie_remove(struct platform_device *pdev) { ... pci_stop_root_bus(pp->root_bus); pci_remove_root_bus(pp->root_bus); dw_pcie_free_msi(pp); ... } Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-05-07PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify codeJisheng Zhang1-13/+8
Use devm_pci_alloc_host_bridge() to simplify the error code path. This also fixes a leak in the dw_pcie_host_init() error path. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]> CC: [email protected] # v4.13+
2019-05-07PCI: dwc: Free MSI in dw_pcie_host_init() error pathJisheng Zhang1-3/+6
If we ever did MSI-related initializations, we need to call dw_pcie_free_msi() in the error code path. Remove the IS_ENABLED(CONFIG_PCI_MSI) check for MSI init because pci_msi_enabled() already has a stub for !CONFIG_PCI_MSI. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-05-07PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()Jisheng Zhang1-4/+8
To avoid a memory leak, free the page allocated for MSI IRQ in dw_pcie_free_msi(). Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-05-07PCI: dwc: Fix dw_pcie_free_msi() if msi_irq is invalidJisheng Zhang1-2/+4
Check msi_irq variable before calling irq_set_chained_handler() and irq_set_handler_data(), lest we call those functions for an invalid MSI IRQ. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-04-15PCI: dwc: Enable iATU unroll for endpoint tooKishon Vijay Abraham I1-19/+0
iatu_unroll_enabled flag is set only for Designware in host mode. However iATU unroll can be applicable for endpoint mode too. Set iatu_unroll_enabled flag in dw_pcie_setup() which is common for both host mode and endpoint mode. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-04-04PCI: dwc: Remove default MSI initialization for platform specific MSI chipsKishon Vijay Abraham I1-11/+13
Platforms which populate msi_host_init() have their own MSI controller logic. Writing to MSI control registers on platforms which do not use Designware's MSI controller logic might have side effects. To be safe, do not write to MSI control registers if the platform uses its own MSI controller logic instead of Designware's MSI one. Signed-off-by: Kishon Vijay Abraham I <[email protected]> [[email protected]: updated commit log] Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-04-04PCI: dwc: Remove Keystone specific dw_pcie_host_opsKishon Vijay Abraham I1-36/+14
Now that Keystone started using its own msi_irq_chip, remove Keystone specific callback functions defined in dw_pcie_host_ops. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-04-04PCI: keystone: Use Keystone specific msi_irq_chipKishon Vijay Abraham I1-3/+2
Use Keystone specific msi_irq_chip to configure the MSI controller logic in the PCIe keystone wrapper instead of using the default Designware msi_irq chip (dw_pci_msi_bottom_irq_chip) with callback functions for configuring the Keystone MSI controller. This will help to remove Keystone specific callback functions added in dw_pcie_host_ops. Move the default msi_irq_chip assignment to dw_pcie_host_init since platforms that doesn't use the default msi_irq_chip will assign msi_irq_chip in the msi_host_init() callback. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-04-04PCI: dwc: Add support to use non default msi_irq_chipKishon Vijay Abraham I1-1/+4
Platforms using DesignWare IP use dw_pci_msi_bottom_irq_chip for configuring the MSI controller logic within the DesignWare IP. However certain platforms like Keystone (K2G) which uses DesignWare IP have their own MSI controller logic. For handling such platforms, the irqchip ops use msi_irq_ack(), msi_set_irq(), msi_clear_irq() callback functions. Add support to use different msi_irq_chip with default set to dw_pci_msi_bottom_irq_chip. This is in preparation to get rid of msi_irq_ack(), msi_set_irq(), msi_clear_irq() and other Keystone specific dw_pcie_host_ops. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-03-01PCI: dwc: skip MSI init if MSIs have been explicitly disabledLucas Stach1-1/+1
Since 7c5925afbc58 (PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API) the MSI init claims one of the controller IRQs as a chained IRQ line for the MSI controller. On some designs, like the i.MX6, this line is shared with a PCIe legacy IRQ. When the line is claimed for the MSI domain, any device trying to use this legacy IRQs will fail to request this IRQ line. As MSI and legacy IRQs are already mutually exclusive on the DWC core, as the core won't forward any legacy IRQs once any MSI has been enabled, users wishing to use legacy IRQs already need to explictly disable MSI support (usually via the pci=nomsi kernel commandline option). To avoid any issues with MSI conflicting with legacy IRQs, just skip all of the DWC MSI initalization, including the IRQ line claim, when MSI is disabled. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Tested-by: Tim Harvey <[email protected]> Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Gustavo Pimentel <[email protected]> Cc: [email protected]
2019-03-01PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()Andrey Smirnov1-38/+23
Default implementation of pcie_rd_other_conf() and dw_pcie_wd_other_conf() share more than 80% of their code. Move shared code into a dedicated subroutine and convert pcie_rd_other_conf() and dw_pcie_wd_other_conf() to use it. No functional change intended. Signed-off-by: Andrey Smirnov <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Chris Healy <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Leonard Crestez <[email protected]> Cc: "A.s. Dong" <[email protected]> Cc: Richard Zhu <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected]
2019-02-01PCI: dwc: Replace bit rotation operation (1 << bit) with BIT(bit)Gustavo Pimentel1-3/+3
Replace bit rotation operation (1 << bit) with BIT(bit), which simplifies code reading. No functional change is intended. Signed-off-by: Gustavo Pimentel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Jingoo Han <[email protected]>
2019-02-01PCI: dwc: Improve code readability and simplify mask/unmask operationsGustavo Pimentel1-6/+6
Improve code readability and simplifies mask/unmask operations by inverting the applied logic (no functional change is intended). Replace variable name from irq_status to irq_mask, since its goal is to keep track of which interrupts are masked or not. Signed-off-by: Gustavo Pimentel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Jingoo Han <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.