| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a debugfs hierarchy to display the configured subsystems
and the controllers attached to the subsystems.
Suggested-by: Redouane BOUFENGHOUR <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Block layer integrity configuration is a bit complex right now, as it
indirects through operation vectors for a simple two-dimensional
configuration:
a) the checksum type of none, ip checksum, crc, crc64
b) the presence or absence of a reference tag
Remove the integrity profile, and instead add a separate csum_type flag
which replaces the existing ip-checksum field and a new flag that
indicates the presence of the reference tag.
This removes up to two layers of indirect calls, remove the need to
offload the no-op verification of non-PI metadata to a workqueue and
generally simplifies the code. The downside is that block/t10-pi.c now
has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is
supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded
for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY
already, though.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Kanchan Joshi <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Currently two similar config options NVME_HOST_AUTH and NVME_TARGET_AUTH
have almost same descriptions. It is confusing to choose them in
menuconfig. Improve the descriptions to distinguish them.
Signed-off-by: Shin'ichiro Kawasaki <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
When the NVME target code is built-in but its TCP frontend is a loadable
module, enabling keyring support causes a link failure:
x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id'
The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that
depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from
it inherits the state of the tristate symbol rather than the intended
CONFIG_NVME_TARGET one that contains the actual call.
The same thing is true for CONFIG_KEYS, which itself is required for
NVME_KEYRING.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
When only the keyring module is included but auth is not, modpost
complains about the lack of a module license tag:
ERROR: modpost: missing MODULE_LICENSE() in drivers/nvme/common/nvme-common.o
Address this by making both modules buildable standalone,
removing the now unnecessary CONFIG_NVME_COMMON symbol
in the process.
Also, now that NVME_KEYRING config symbol can be either a module or
built-in, the stubs need to check for '#if IS_ENABLED' rather than a
simple '#ifdef'.
Fixes: 9d77eb5277849 ("nvme-keyring: register '.nvme' keyring")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Having a single Kconfig symbol NVME_AUTH conflates the selection
of the authentication functions from nvme/common and nvme/host,
causing kbuild robot to complain when building the nvme target
only. So introduce a Kconfig symbol NVME_HOST_AUTH for the nvme
host bits and use NVME_AUTH for the common functions only.
And move the CRYPTO selection into nvme/common to make it
easier to read.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
TLS handshake is handled in userspace with the netlink tls handshake
protocol.
The patch adds a function to start the TLS handshake upcall for any
incoming network connections if the TCP TSAS sectype is set to 'tls1.3'.
A config option NVME_TARGET_TCP_TLS selects whether the TLS handshake
upcall should be compiled in. The patch also adds reference counting
to struct nvmet_tcp_queue to ensure the queue is always valid when the
the TLS handshake completes.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Commit 71ebe3842ebe ("nvmet-auth: Diffie-Hellman key exchange support")
intends to select 'Support for RFC 7919 FFDHE group parameters' for using
FFDHE groups for NVMe In-Band Authentication.
It however selects CRYPTO_DH_GROUPS_RFC7919, instead of the intended
CRYPTO_DH_RFC7919_GROUPS; notice the swapping of words here.
Correct the select to the intended config option.
Signed-off-by: Lukas Bulwahn <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Implement Diffie-Hellman key exchange using FFDHE groups for NVMe
In-Band Authentication.
This patch adds a new host configfs attribute 'dhchap_dhgroup' to
select the FFDHE group to use.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds three additional configfs entries 'dhchap_key',
'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
format as specified in NVMe Base Specification v2.0 section 8.13.5.8
'Secret representation'.
'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
switch to a different HMAC algorithm.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Transport drivers need both core and fabrics modules, instead of
selecting both, have the selection transitive such that NVME_FABRICS
selects NVME_CORE and transport drivers select NVME_FABRICS.
Suggested-by: Keith Busch <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: James Smart <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
This patch updates KConfig file for the NVMeOF target where we add new
option so that user can selectively enable/disable passthru code.
Signed-off-by: Chaitanya Kulkarni <[email protected]>
[[email protected]: fixed some of the wording in the help message]
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Fill those namespace fields from the block device format for adding
metadata (T10-PI) over fabric support with block devices.
Signed-off-by: Israel Rukshin <[email protected]>
Signed-off-by: Max Gurtovoy <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Build breaks:
drivers/nvme/target/core.c: In function 'nvmet_req_alloc_sgl':
drivers/nvme/target/core.c:939:12: error: implicit declaration of \
function 'sgl_alloc'; did you mean 'bio_alloc'? \
[-Werror=implicit-function-declaration]
req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt);
^~~~~~~~~
bio_alloc
drivers/nvme/target/core.c:939:10: warning: assignment makes pointer \
from integer without a cast [-Wint-conversion]
req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt);
^
drivers/nvme/target/core.c: In function 'nvmet_req_free_sgl':
drivers/nvme/target/core.c:952:3: error: implicit declaration of \
function 'sgl_free'; did you mean 'ida_free'? [-Werror=implicit-function-declaration]
sgl_free(req->sg);
^~~~~~~~
ida_free
Cause:
1. missing include to <linux/scatterlist.h>
2. SGL_ALLOC needs to be enabled
Therefore adding the missing include, as well as Kconfig dependency.
Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Minwoo Im <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
This patch implements the TCP transport driver for the NVMe over Fabrics
target stack. This allows exporting NVMe over Fabrics functionality over
good old TCP/IP.
The driver implements the TP 8000 of how nvme over fabrics capsules and
data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte
stream. nvme-tcp header and data digest are supported as well.
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Roy Shterman <[email protected]>
Signed-off-by: Solganik Alexander <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Several subsystems depend on INFINIBAND_ADDR_TRANS, which in turn depends
on INFINIBAND. However, when with CONFIG_INIFIBAND=m, this leads to a
link error when another driver using it is built-in. The
INFINIBAND_ADDR_TRANS dependency is insufficient here as this is
a 'bool' symbol that does not force anything to be a module in turn.
fs/cifs/smbdirect.o: In function `smbd_disconnect_rdma_work':
smbdirect.c:(.text+0x1e4): undefined reference to `rdma_disconnect'
net/9p/trans_rdma.o: In function `rdma_request':
trans_rdma.c:(.text+0x7bc): undefined reference to `rdma_disconnect'
net/9p/trans_rdma.o: In function `rdma_destroy_trans':
trans_rdma.c:(.text+0x830): undefined reference to `ib_destroy_qp'
trans_rdma.c:(.text+0x858): undefined reference to `ib_dealloc_pd'
Fixes: 9533b292a7ac ("IB: remove redundant INFINIBAND kconfig dependencies")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Greg Thelen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for
options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND.
Remove the unnecessary INFINIBAND depends.
Signed-off-by: Greg Thelen <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
NVME_TARGET_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <[email protected]>
Cc: Tarick Bedeir <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Use the sgl_alloc() and sgl_free() functions instead of open coding
these functions.
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Use the sgl_alloc() and sgl_free() functions instead of open coding
these functions.
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: James Smart <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add FC LLDD loopback driver to test FC host and target transport within
nvme-fabrics
To aid in the development and testing of the lower-level api of the FC
transport, this loopback driver has been created to act as if it were a
FC hba driver supporting both the host interfaces as well as the target
interfaces with the nvme FC transport.
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Jay Freyensee <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Implements the FC-NVME T11 definition of how nvme fabric capsules are
performed on an FC fabric. Utilizes a lower-layer API to FC host adapters
to send/receive FC-4 LS operations and perform the FCP transactions
necessary to perform and FCP IO request for NVME.
The T11 definitions for FC-4 Link Services are implemented which create
NVMeOF connections. Implements the hooks with nvmet layer to pass NVME
commands to it for processing and posting of data/response base to the
host via the different connections.
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Jay Freyensee <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
So select the NVME_CORE symbol instead of depending on BLK_DEV_NVME.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jay Freyensee <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
|
|
I ran into the same problem on NVME_TARGET_RDMA now,
which otherwise needs dependencies on both CONFIG_BLOCK and
CONFIGFS_FS:
warning: (NVME_TARGET_LOOP && NVME_TARGET_RDMA) selects NVME_TARGET which has unmet direct dependencies (BLOCK && CONFIGFS_FS)
0xA002B368 Mon Jul 11 18:00:45 CEST 2016 failed
In file included from ../drivers/nvme/target/core.c:16:0:
drivers/nvme/target/nvmet.h:222:14: error: field 'inline_bio' has incomplete type
struct bio inline_bio;
^~~~~~~~~~
drivers/nvme/target/core.c: In function 'nvmet_async_event_work':
drivers/nvme/target/core.c:98:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
kfree(aen);
^~~~~
../drivers/nvme/target/core.c: In function 'nvmet_ns_enable':
../drivers/nvme/target/core.c:269:13: error: implicit declaration of function 'blkdev_get_by_path' [-Werror=implicit-function-declaration]
ns->bdev = blkdev_get_by_path(ns->device_path, FMODE_READ | FMODE_WRITE,
Folding in my patch below should address that too.
Signed-off-by: Arnd Bergmann <[email protected]>
Reported-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
This patch implements the RDMA transport for the NVMe over Fabrics target,
which allows exporting NVMe over Fabrics functionality over RDMA fabrics
(Infiniband, RoCE, iWARP).
All NVMe logic is in the generic target and this module just provides a
small glue between it and the generic code in the RDMA subsystem.
Signed-off-by: Armen Baloyan <[email protected]>,
Signed-off-by: Jay Freyensee <[email protected]>
Signed-off-by: Ming Lin <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Steve Wise <[email protected]>
Tested-by: Steve Wise <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
CONFIG_NVME_TARGET has a correct CONFIG_CONFIGFS_FS dependency, but the
newly added NVME_TARGET_LOOP is missing this, resulting in a link
failure:
drivers/nvme/built-in.o: In function `nvmet_init_configfs':
loop.c:(.init.text+0x2a0): undefined reference to `config_group_init'
loop.c:(.init.text+0x2c0): undefined reference to `config_group_init_type_name'
loop.c:(.init.text+0x318): undefined reference to `configfs_register_subsystem'
drivers/nvme/built-in.o: In function `nvmet_exit_configfs':
loop.c:(.exit.text+0x9c): undefined reference to `configfs_unregister_subsystem'
This adds the same dependency here.
Signed-off-by: Arnd Bergmann <[email protected]>
Fixes: 3a85a5de29ea ("nvme-loop: add a NVMe loopback host driver")
Signed-off-by: Jens Axboe <[email protected]>
|
|
This patch implements adds nvme-loop which allows to access local devices
exported as NVMe over Fabrics namespaces. This module can be useful for
easy evaluation, testing and also feature experimentation.
To createa nvme-loop device you need to configure the NVMe target to
export a loop port (see the nvmetcli documentaton for that) and then
connect to it using
nvme connect-all -t loop
which requires the very latest nvme-cli version with Fabrics support.
Signed-off-by: Jay Freyensee <[email protected]>
Signed-off-by: Ming Lin <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Steve Wise <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
This patch introduces a implementation of NVMe subsystems,
controllers and discovery service which allows to export
NVMe namespaces across fabrics such as Ethernet, FC etc.
The implementation conforms to the NVMe 1.2.1 specification
and interoperates with NVMe over fabrics host implementations.
Configuration works using configfs, and is best performed using
the nvmetcli tool from http://git.infradead.org/users/hch/nvmetcli.git,
which also has a detailed explanation of the required steps in the
README file.
Signed-off-by: Armen Baloyan <[email protected]>
Signed-off-by: Anthony Knapp <[email protected]>
Signed-off-by: Jay Freyensee <[email protected]>
Signed-off-by: Ming Lin <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Steve Wise <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|