aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)AuthorFilesLines
2023-11-22wifi: mt76: mt7925: fix typo in mt7925_init_he_capsLorenzo Bianconi1-2/+2
Use iftype for interface type switch in mt7925_init_he_caps routine. This found during code review but later Coverity reported this with id 1549845. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/7de6e939dc75ee08f05bf1ee73253aa7eeccf28e.1699869649.git.lorenzo@kernel.org
2023-11-08wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC configMing Yen Hsieh1-0/+1
No matter CLC is enabled or disabled, the driver should initialize the default value 0xff for channel configuration of CLC. Otherwise, the zero value would disable channels. Reported-and-tested-by: Ben Greear <greearb@candelatech.com> Closes: https://lore.kernel.org/all/2fb78387-d226-3193-8ca7-90040561b9ad@candelatech.com/ Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/5a976ddf1f636b5cb809373501d3cfdc6d8de3e4.1698648737.git.deren.wu@mediatek.com
2023-10-28net: fill in MODULE_DESCRIPTION()s in kuba@'s modulesJakub Kicinski1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Fill it in for the modules I maintain. Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-26Merge tag 'wireless-next-2023-10-26' of ↵Jakub Kicinski2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.7 The third, and most likely the last, features pull request for v6.7. Fixes all over and only few small new features. Major changes: iwlwifi - more Multi-Link Operation (MLO) work ath12k - QCN9274: mesh support ath11k - firmware-2.bin container file format support * tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (155 commits) wifi: ray_cs: Remove unnecessary (void*) conversions Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition" wifi: ath12k: Introduce and use ath12k_sta_to_arsta() wifi: ath12k: fix htt mlo-offset event locking wifi: ath12k: fix dfs-radar and temperature event locking wifi: ath11k: fix gtk offload status event locking wifi: ath11k: fix htt pktlog locking wifi: ath11k: fix dfs radar event locking wifi: ath11k: fix temperature event locking wifi: ath12k: rename the sc naming convention to ab wifi: ath12k: rename the wmi_sc naming convention to wmi_ab wifi: ath11k: add firmware-2.bin support wifi: ath11k: qmi: refactor ath11k_qmi_m3_load() wifi: rtw89: cleanup firmware elements parsing wifi: rt2x00: rework MT7620 PA/LNA RF calibration wifi: rt2x00: rework MT7620 channel config function wifi: rt2x00: improve MT7620 register initialization MAINTAINERS: wifi: rt2x00: drop Helmut Schaa wifi: wlcore: main: replace deprecated strncpy with strscpy wifi: wlcore: boot: replace deprecated strncpy with strscpy ... ==================== Link: https://lore.kernel.org/r/20231026090411.B2426C433CB@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23page_pool: remove PP_FLAG_PAGE_FRAGYunsheng Lin1-1/+1
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count handling is unified and page_pool_alloc_frag() is supported in 32-bit arch with 64-bit DMA, so remove it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> CC: Lorenzo Bianconi <lorenzo@kernel.org> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Liang Chen <liangchen.linux@gmail.com> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23wifi: mt76: mt7921: fix kernel panic by accessing invalid 6GHz channel infoMing Yen Hsieh1-0/+3
When the chip not support 6GHz capability, the channels of 6GHz information should not be updated. This caused a crash: [ 19.442078] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 [ 19.457535] Mem abort info: [ 19.465329] ESR = 0x0000000096000004 [ 19.473295] EC = 0x25: DABT (current EL), IL = 32 bits [ 19.482354] SET = 0, FnV = 0 [ 19.489143] EA = 0, S1PTW = 0 [ 19.495991] FSC = 0x04: level 0 translation fault [ 19.504554] Data abort info: [ 19.511111] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 19.520269] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 19.528988] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 19.537960] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001027a9000 [ 19.548014] [0000000000000014] pgd=0000000000000000, p4d=000000000000 [ 19.558429] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 19.568270] Modules linked in: mt7921e mt7921_common mt792x_lib mt76_connac_lib mt76 mac80211 btusb btintel cfg80211 btmtk snd_sof_ipc_msg_ btrtl snd_sof_ipc_flood_test btbcm bluetooth snd_sof_mt8195 uvcvideo mtk_adsp_common snd_sof_xtensa_dsp uvc snd_sof_of snd_sof videobuf2_vmalloc ecdh_generic ecc snd_sof_utils cros_ec_lid_angle cros_ec_sensors crct10dif_ cros_ec_sensors_core cros_usbpd_logger crypto_user fuse ip_tables ipv6 [ 19.614237] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 6.6.0-rc6-next-20231017+ #324 [ 19.625957] Hardware name: Acer Tomato (rev2) board (DT) [ 19.634970] Workqueue: events mt7921_init_work [mt7921_common] [ 19.644522] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTY [ 19.655182] pc : mt7921_regd_notifier+0x180/0x290 [mt7921_common] [ 19.664983] lr : mt7921_regd_notifier+0xd4/0x290 [mt7921_common] [ 19.674679] sp : ffff800080acba80 [ 19.681649] x29: ffff800080acba80 x28: 0000000000000000 x27: ffff4faf [ 19.692483] x26: 0000000000000000 x25: 0000000000000000 x24: ffff4faf [ 19.703294] x23: 00000000ffffe926 x22: ffff4faf16031fa0 x21: 00000000 [ 19.714108] x20: 000000000000001c x19: ffff4faf16ba6f40 x18: 00000000 [ 19.724928] x17: 0000000000000000 x16: ffffac6b891c2750 x15: ffff8000 [ 19.735722] x14: 0000000000000180 x13: 0000000000000000 x12: 00000000 [ 19.746478] x11: 0000000000000002 x10: ffff4faf01c21780 x9 : ffffac6b [ 19.757214] x8 : 00000000006c0000 x7 : ffffac6b6b020cf0 x6 : ffffac6b [ 19.767945] x5 : ffffac6b6b020d00 x4 : ffffac6b6b020cf8 x3 : ffff4faf [ 19.778648] x2 : 0000000000000000 x1 : 000000000000001c x0 : 00000000 [ 19.789366] Call trace: [ 19.795381] mt7921_regd_notifier+0x180/0x290 [mt7921_common] [ 19.804675] wiphy_update_regulatory+0x2bc/0xa08 [cfg80211] [ 19.813864] wiphy_regulatory_register+0x4c/0x88 [cfg80211] [ 19.823029] wiphy_register+0x75c/0x8d0 [cfg80211] [ 19.831446] ieee80211_register_hw+0x70c/0xc10 [mac80211] [ 19.840479] mt76_register_device+0x168/0x2e8 [mt76] [ 19.849008] mt7921_init_work+0xdc/0x250 [mt7921_common] [ 19.857817] process_one_work+0x148/0x3c0 [ 19.865292] worker_thread+0x32c/0x450 [ 19.872489] kthread+0x11c/0x128 [ 19.879173] ret_from_fork+0x10/0x20 [ 19.886153] Code: f0000041 9100a021 94000aef aa0003f9 (b9401780) [ 19.895634] ---[ end trace 0000000000000000 ]--- Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Closes: https://lore.kernel.org/all/927e7d50-826d-4c92-9931-3c59b18c6945@collabora.com/ Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/cf77a58a60d81c77a28388bc8d312b87ffb48434.1697603002.git.deren.wu@mediatek.com
2023-10-23wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()Kalle Valo1-1/+1
make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-09Merge tag 'mt76-for-kvalo-2023-09-30' of https://github.com/nbd168/wirelessKalle Valo71-560/+10196
mt76 patches for 6.7 * mt7603/mt7628 stability improvements * fixes * new driver for mt7925
2023-10-06Merge tag 'wireless-next-2023-10-06' of ↵Jakub Kicinski3-14/+7
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.7 The first pull request for v6.7, with both stack and driver changes. We have a big change how locking is handled in cfg80211 and mac80211 which removes several locks and hopefully simplifies the locking overall. In drivers rtw89 got MCC support and smaller features to other active drivers but nothing out of ordinary. Major changes: cfg80211 - remove wdev mutex, use the wiphy mutex instead - annotate iftype_data pointer with sparse - first kunit tests, for element defrag - remove unused scan_width support mac80211 - major locking rework, remove several locks like sta_mtx, key_mtx etc. and use the wiphy mutex instead - remove unused shifted rate support - support antenna control in frame injection (requires driver support) - convert RX_DROP_UNUSABLE to more detailed reason codes rtw89 - TDMA-based multi-channel concurrency (MCC) support iwlwifi - support set_antenna() operation - support frame injection antenna control ath12k - WCN7850: enable 320 MHz channels in 6 GHz band - WCN7850: hardware rfkill support - WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster ath11k - add chip id board name while searching board-2.bin * tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits) wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo() wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips wifi: rtw89: debug: show txpwr table according to chip gen wifi: rtw89: phy: set TX power RU limit according to chip gen wifi: rtw89: phy: set TX power limit according to chip gen wifi: rtw89: phy: set TX power offset according to chip gen wifi: rtw89: phy: set TX power by rate according to chip gen wifi: rtw89: mac: get TX power control register according to chip gen wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp wifi: rtlwifi: fix EDCA limit set by BT coexistence wifi: rt2x00: fix MT7620 low RSSI issue wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance wifi: rtw89: refine uplink trigger based control mechanism wifi: rtw89: 8851b: update TX power tables to R34 wifi: rtw89: 8852b: update TX power tables to R35 wifi: rtw89: 8852c: update TX power tables to R67 wifi: rtw89: regd: configure Thailand in regulation type wifi: mac80211: add back SPDX identifier wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines ... ==================== Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06Merge wireless into wireless-nextJohannes Berg3-13/+15
Resolve several conflicts, mostly between changes/fixes in wireless and the locking rework in wireless-next. One of the conflicts actually shows a bug in wireless that we'll want to fix separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org>
2023-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-13/+15
Cross-merge networking fixes after downstream PR. No conflicts (or adjacent changes of note). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04Merge tag 'wireless-2023-09-27' of ↵Jakub Kicinski3-13/+15
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Quite a collection of fixes this time, really too many to list individually. Many stack fixes, even rfkill (found by simulation and the new eevdf scheduler)! Also a bigger maintainers file cleanup, to remove old and redundant information. * tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits) wifi: iwlwifi: mvm: Fix incorrect usage of scan API wifi: mac80211: Create resources for disabled links wifi: cfg80211: avoid leaking stack data into trace wifi: mac80211: allow transmitting EAPOL frames with tainted key wifi: mac80211: work around Cisco AP 9115 VHT MPDU length wifi: cfg80211: Fix 6GHz scan configuration wifi: mac80211: fix potential key leak wifi: mac80211: fix potential key use-after-free wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling wifi: brcmfmac: Replace 1-element arrays with flexible arrays wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM rfkill: sync before userspace visibility/changes wifi: mac80211: fix mesh id corruption on 32 bit systems wifi: cfg80211: add missing kernel-doc for cqm_rssi_work wifi: cfg80211: fix cqm_config access race wifi: iwlwifi: mvm: Fix a memory corruption issue wifi: iwlwifi: Ensure ack flag is properly cleared. wifi: iwlwifi: dbg_ini: fix structure packing iwlwifi: mvm: handle PS changes in vif_cfg_changed ... ==================== Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-30wifi: mt76: Annotate struct mt76_rx_tid with __counted_byKees Cook1-1/+1
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct mt76_rx_tid. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Shayne Chen <shayne.chen@mediatek.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: linux-wireless@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: update the channel usage when the regd domain changedMing Yen Hsieh4-2/+64
The 5.9/6GHz channel license of a certain platform device has been regulated in various countries. That may be difference with standard Liunx regulatory domain settings. In this case, when .reg_notifier() called for regulatory change, mt792x chipset should update the channel usage based on clc or dts configurations. Channel would be disabled by following cases. * clc report the particular UNII-x is disabled. * dts enabled and the channel is not configured. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: get regulatory information from the clc eventMing Yen Hsieh5-4/+41
The clc event can report the radio configuration for the corresponding country and the driver would take it as regulatory information of a certain platform device. This patch would change the clc commnad from no-waiting to waiting for event. For backward compatible, we also add a new nic capability tag to indicate the firmware did support this new clc event from now on. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: add 6GHz power type support for clcMing Yen Hsieh3-1/+46
There are several power type should be supported in 6GHz band. mt7921 apply 6GHz power type from AP settings and clc will setup the corresponding regulatory power. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: enable set txpower for UNII-4Ming Yen Hsieh1-1/+1
support power config for channel 165/173/177 Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: move connac nic capability handling to mt7921Deren Wu3-122/+121
mt76_connac_mcu_get_nic_capability() is used by mt7921 only. It would be better to put the code in chip folder. And we can provide more chip capability information in mt792x_phy without making mt76_phy much bigger. The three functions would be moved to mt7921 folder and renamed. mt76_connac_mcu_parse_tx_resource() mt76_connac_mcu_parse_phy_cap() mt76_connac_mcu_get_nic_capability() Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: reduce spin_lock_bh held up in mt76_dma_rx_cleanupSean Wang1-2/+4
mt76_dma_rx_cleanup would be frequenetly called up to reset the dma rings to be freshed as new ones when switching back from the deep sleep mode to the active mode on mt7921 and mt7922. Shrink the scope of spin_lock_bh in mt76_dma_rx_cleanup being held up to allow the kernel scheduler to be able to switch other tasks in time by reducing the latency. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: remove periodic MPDU TXS requestBenjamin Lin3-19/+21
Remove periodic MPDU TXS request. Get TID and FrameType from SKB instead of TXWI, which is empty for Data Frame after MPDU TXS request is removed, hence prohibiting the establishment of TX BA session. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: enable PPDU-TxS to hostYi-Chia Hsieh4-17/+48
Enable PPDU TxS by default. This makes the driver able to get Tx rate information from TxS. The driver will also refresh BA session timer on receive of PPDU TxS when WED is on. Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: Add mcu commands for getting sta tx statisticYi-Chia Hsieh6-0/+130
Per peer Tx/Rx statistic can only be obtained by querying WM when WED is on. This patch switches to periodic event reporting in the case of WED being enabled. Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: get tx_retries and tx_failed from txfreeYi-Chia Hsieh3-5/+22
Retrieve tx retries/failed counts from 'txfree done' events and report them via mt7996_sta_statistics(). Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt792x: move some common usb code in mt792x moduleLorenzo Bianconi9-59/+37
Move the following shared usb routines in mt792x module: - mt792xu_stop - mt792x_stop Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt792x: move mt7921_skb_add_usb_sdio_hdr in mt792x moduleLorenzo Bianconi8-36/+21
Since mt7921_skb_add_usb_sdio_hdr is shared between mt7925 and mt7921 drivers, move it in mt792x module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915 add tc offloading supportFelix Fietkau2-0/+18
This is used for offloading flows from WLAN to Ethernet, or from WLAN to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chipsDeren Wu17-0/+8797
Add mt7925, a new mac80211 driver for the MediaTek Wi-Fi 7 (802.11be) device Filogic 360, which can support Station, AP, P2P, and monitor modes. Filogic 360 supports max 4096-QAM/160MHz radio operation at 6 GHz, 5 GHz, or 2.4 GHz with 2x2 antennas. This chip supports PCIe and USB bus type. mt7925 supports Wi-Fi 6E and EHT rate with single link only at this moment, whereas Wi-Fi 7 and its specific features are working in progress. They will be introduced in further patches. The driver is build tested by Intel's kernel test robot with both GCC and Clang with several architecture. Sparse reports no warnings. There are multiple authors, they are listed in alphabetical order below. Co-developed-by: Hao Zhang <hao.zhang@mediatek.com> Signed-off-by: Hao Zhang <hao.zhang@mediatek.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Mingyen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Mingyen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Nelson Yu <nelson.yu@mediatek.com> Signed-off-by: Nelson Yu <nelson.yu@mediatek.com> Co-developed-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Co-developed-by: Rong Yan <rong.yan@mediatek.com> Signed-off-by: Rong Yan <rong.yan@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: fix the wrong rate selected in fw for the chanctx driverSean Wang1-2/+7
The variable band should be determined by the ieee80211_chanctx_conf when the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we added the extension to mt76_connac2_mac_tx_rate_val and mt76_connac_get_he_phy_cap for the firmware can select the proper rate. Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: David Ruth <druth@chromium.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: fix the wrong rate pickup for the chanctx driverSean Wang3-5/+14
The variable band should be determined by the ieee80211_chanctx_conf when the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we added the extension to mt76_connac2_mac_tx_rate_val by distinguishing if it can support chanctx to fix the incorrect rate pickup. Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: David Ruth <druth@chromium.org> Tested-by: David Ruth <druth@chromium.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: move struct ieee80211_chanctx_conf up to struct mt76_vifSean Wang4-9/+9
Move struct ieee80211_chanctx_conf up to struct mt76_vif to allow the connac2 library can access the struct ieee80211_chanctx_conf * member in struct mt76_vif. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: David Ruth <druth@chromium.org> Tested-by: David Ruth <druth@chromium.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: Drop unnecessary error check for debugfs_create_dir()Jinjie Ruan1-2/+0
debugfs_create_dir() returns ERR_PTR and never return NULL. As Russell suggested, this patch removes the error checking for debugfs_create_dir(). This is because the DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in start_creating() which can handle it gracefully. So these checks are unnecessary. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915: fix beamforming availability checkMeiChia Chiu1-2/+2
Without this patch, when ap sets the tx stream number to 2, ap won't send any beamforming packet. Fixes: f89f297aef28 ("mt76: mt7915: fix txbf starec TLV issues") Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915: update mpdu density capabilityPeter Chiu1-4/+12
Set mpdu density to 2 usec for non-mt7915 Wi-Fi 6 generation chipsets to align to the hardware capability which improves the throughput. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: check vif type before reporting cca and csaPeter Chiu2-6/+10
Do not report cca and csa finish to upper layer on station type vif to prevent warnings caused by setting beacon. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparisonShayne Chen3-3/+3
Use the correct ieee80211_conf of each band for IEEE80211_CONF_MONITOR comparison. Fixes: 24e69f6bc3ca ("mt76: fix monitor rx FCS error in DFS channel") Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: get rid of false alamrs of tx emission issuesStanleyYP Wang2-6/+6
When the set_chan_info command is set with CH_SWITCH_NORMAL reason, even if the action is UNI_CHANNEL_RX_PATH, it'll still generate some unexpected tones, which might confuse DFS CAC tests that there are some tone leakages. To get rid of these kinds of false alarms, always bypass DPD calibration when IEEE80211_CONF_IDLE is set. Reviewed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix potential memory leak of beacon commandsBo Jiao2-4/+16
Fix potential memory leak when setting beacon and inband discovery commands. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: check sta rx control frame to multibss capabilityAllen Ye2-0/+4
Add CAP3_RX_CTRL_FRAME_TO_MULTIBSS check when setting sta_muru_tlv, which is used to get stations's capability of receiving control frames when running OFDMA with MBSSIDs. Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: update beacon size limitationMeiChia Chiu7-58/+72
To accommodate 11v MBSSID IE and support maximum 16 MBSSIDs, expand the beacon size limitation for beacon and inband discovery commands. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Money Wang <money.wang@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add MBSSID support for mt7996Chank Chen3-1/+90
Add bss_info_uni_mbssid tag and implement 802.11v MBSSID support for mt7996 chipsets. Signed-off-by: Chank Chen <chank.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix clang-specific fortify warningsDmitry Antipov3-3/+3
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following (somewhat confusing due to absence of an actual source code location): In file included from drivers/net/wireless/mediatek/mt76/mt792x_core.c:4: In file included from ./include/linux/module.h:13: In file included from ./include/linux/stat.h:19: In file included from ./include/linux/time.h:60: In file included from ./include/linux/time32.h:13: In file included from ./include/linux/timex.h:67: In file included from ./arch/x86/include/asm/timex.h:5: In file included from ./arch/x86/include/asm/processor.h:23: In file included from ./arch/x86/include/asm/msr.h:11: In file included from ./arch/x86/include/asm/cpumask.h:5: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); In file included from drivers/net/wireless/mediatek/mt76/mt7915/main.c:4: In file included from ./include/linux/etherdevice.h:20: In file included from ./include/linux/if_ether.h:19: In file included from ./include/linux/skbuff.h:15: In file included from ./include/linux/time.h:60: In file included from ./include/linux/time32.h:13: In file included from ./include/linux/timex.h:67: In file included from ./arch/x86/include/asm/timex.h:5: In file included from ./arch/x86/include/asm/processor.h:23: In file included from ./arch/x86/include/asm/msr.h:11: In file included from ./arch/x86/include/asm/cpumask.h:5: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); In file included from drivers/net/wireless/mediatek/mt76/mt7996/main.c:6: In file included from drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h:9: In file included from ./include/linux/interrupt.h:8: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); The compiler actually complains on 'mt7915_get_et_strings()', 'mt792x_get_et_strings()' and 'mt7996_get_et_strings()' due to the same reason: fortification logic inteprets call to 'memcpy()' as an attempt to copy the whole array from its first member and so issues an overread warning. These warnings may be silenced by passing an address of the whole array and not the first member to 'memcpy()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023)Ingo Rohloff1-0/+2
In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is used, which according to its PCI Vendor ID is from "ITTIM Technology". This chip works flawlessly with the mt7921e module. The driver doesn't bind to this PCI device, because the Vendor ID from "ITTIM Technology" is not recognized. This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi chip. Signed-off-by: Ingo Rohloff <lundril@gmx.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: Use PTR_ERR_OR_ZERO() to simplify codeJinjie Ruan4-16/+4
Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to simplify code. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: support per-band LED controlJen-Hao Cheng2-13/+22
Extend settings of LED registers to support per-band configuration. Signed-off-by: Jen-Hao Cheng <jen-hao.cheng@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: support more options for mt7996_set_bitrate_mask()Howard Hsu1-2/+133
Add support to configure parameters at runtime, such as mcs, gi, and he_ltf. Note that EHT mode does not support this feature yet. Co-developed-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: only set vif teardown cmds at remove interfaceShayne Chen1-15/+6
Only send commands that disable vif when removing interface, this reduces some unnecessary bss_info and sta_rec commands, especially for station interface. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix TWT command formatPeter Chiu1-2/+5
Align the command format of UNI_CMD_TWT_ARGT_UPDATE to firmware. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix rx rate report for CBW320-2Peter Chiu1-0/+2
RX vector reports channel bandwidth 320-1 and 320-2 with different values. Fix it to correctly report rx rate when using CBW320-2. Fixes: 80f5a31d2856 ("wifi: mt76: mt7996: add support for EHT rate report") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix wmm queue mappingPeter Chiu2-4/+10
Firmware uses access class index (ACI) for wmm parameters update, so convert mac80211 queue to ACI in mt7996_conf_tx(). Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix beamformee ss subfield in EHT PHY capHoward Hsu1-4/+5
According to P802.11be_D3.2 Table 9-404m, the minimum value of Beamformee SS field shall be 3. Fix the values to follow the spec. Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Powered by cgit, Gruvboxed by Blaster4385.