aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
AgeCommit message (Collapse)AuthorFilesLines
2024-10-25Revert "wifi: iwlwifi: remove retry loops in start"Emmanuel Grumbach1-1/+9
Revert commit dfdfe4be183b ("wifi: iwlwifi: remove retry loops in start"), it turns out that there's an issue with the PNVM load notification from firmware not getting processed, that this patch has been somewhat successfully papering over. Since this is being reported, revert the loop removal for now. We will later at least clean this up to only attempt to retry if there was a timeout, but currently we don't even bubble up the failure reason to the correct layer, only returning NULL. Fixes: dfdfe4be183b ("wifi: iwlwifi: remove retry loops in start") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241022092212.4aa82a558a00.Ibdeff9c8f0d608bc97fc42024392ae763b6937b7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-25wifi: iwlwifi: mvm: don't leak a link on AP removalEmmanuel Grumbach1-1/+1
Release the link mapping resource in AP removal. This impacted devices that do not support the MLD API (9260 and down). On those devices, we couldn't start the AP again after the AP has been already started and stopped. Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241010140328.c54c42779882.Ied79e0d6244dc5a372e8b6ffa8ee9c6e1379ec1d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: iwlwifi: mvm: replace CONFIG_PM by CONFIG_PM_SLEEPEmmanuel Grumbach1-2/+2
Replace the ifdef CONFIG_PM by CONFIG_PM_SLEEP. CONFIG_PM was useful when we had CONFIG_PM_RUNTIME but that was removed long ago. Use PM_SLEEP consistently across the driver. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.44e47ba584de.I64f985d0405345252b76b7157291b79677abd64d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-04Merge tag 'wireless-next-2024-09-04' of ↵Jakub Kicinski1-32/+41
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== pull-request: wireless-next-2024-09-04 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. ==================== Conflicts: drivers/net/wireless/ath/ath12k/hw.c 38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850") 8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only") https://lore.kernel.org/87msldyj97.fsf@kernel.org Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27wifi: iwlwifi: mvm: drop wrong STA selection in TXJohannes Berg1-13/+3
This shouldn't happen at all, since in station mode all MMPDUs go through the TXQ for the STA, and not this function. There may or may not be a race in mac80211 through which this might happen for some frames while a station is being added, but in that case we can also just drop the frame and pretend the STA didn't exist yet. Also, the code is simply wrong since it uses deflink, and it's not easy to fix it since the mvmvif->ap_sta pointer cannot be used without the mutex, and perhaps the right link might not even be known. Just drop the frame at that point instead of trying to fix it up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb8854057ded03c7dc81d7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: Offload RLC/SMPS functionality to firmwareDaniel Gabay1-2/+7
Currently, the driver handles SMPS decisions by tracking AP capabilities, BT coexistence changes, sending necessary SMPS frames to the AP, and updating firmware with RX chain info using the RLC_CONFIG_CMD. Starting with version 3 of the RLC_CONFIG_CMD, the firmware takes over this responsibility. It now tracks SMPS, sends frames, and configures the RLC. In this patch: 1. Stop sending RLC_CONFIG_CMD when firmware supports RLC offload (version 3), as rlc.rx_chain_info is not needed by firmware, and no other field in the cmd is used. 2. Prevent the driver from forwarding any SMPS requests to mac80211, i.e., the driver should not transmit SMPS frames to the AP as firmware handles that. 3. Set NL80211_FEATURE_DYNAMIC_SMPS and NL80211_FEATURE_STATIC_SMPS conditionally based on RLC version. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.45da23be1f65.I0d46db82dd990a82e8a66876fe2f5310bc9513be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: Enable channel puncturing for US/CAN from biosSomashekhar(Som)1-6/+2
Add support for enabling channel puncturing for US/CAN based on BIOS configuration through UEFI Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.828f3ecf5118.I5561ab8c7cd48ad4e5d6daf21b037bf88c619a4a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add support for new REDUCE_TXPOWER_CMD versionsEmmanuel Grumbach1-11/+26
New API versions are coming up for this command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.7ec1527be98c.I52dede6532bc61041c441caee5273734f14a1d78@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: prepare the introduction of V9 of REDUCED_TX_POWEREmmanuel Grumbach1-2/+5
* Rename iwl_dev_tx_power_cmd to iwl_dev_tx_power_cmd_v3_v8 * struct iwl_dev_tx_power_common needs to be packed. It was always the case, but now that its size is not a multiple of 4, it becomes meaningful. * Move per_band data out of the common structure since it won't be present in the new versions of the command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.8da29a66984f.I922bdef4740d990f98cb452e858c4157bbc491c5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-26wifi: iwlwifi: mvm: don't wait for tx queues if firmware is deadEmmanuel Grumbach1-1/+8
There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-11Merge tag 'wireless-next-2024-07-11' of ↵Jakub Kicinski1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 Most likely the last "new features" pull request for v6.11 with changes both in stack and in drivers. The big thing is the multiple radios for wiphy feature which makes it possible to better advertise radio capabilities to user space. mt76 enabled MLO and iwlwifi re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support. Major changes: cfg80211/mac80211 * remove DEAUTH_NEED_MGD_TX_PREP flag * multiple radios per wiphy support mac80211_hwsim * multi-radio wiphy support ath12k * DebugFS support for datapath statistics * WCN7850: support for WoW (Wake on WLAN) * WCN7850: device-tree bindings ath11k * QCA6390: device-tree bindings iwlwifi * mvm: re-enable Multi-Link Operation (MLO) * aggregation (A-MSDU) optimisations rtw89 * preparation for RTL8852BE-VT support * WoWLAN support for WiFi 6 chips * 36-bit PCI DMA support mt76 * mt7925 Multi-Link Operation (MLO) support * tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits) wifi: mac80211: fix AP chandef capturing in CSA wifi: iwlwifi: correctly reference TSO page information wifi: mt76: mt792x: fix scheduler interference in drv own process wifi: mt76: mt7925: enabling MLO when the firmware supports it wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx wifi: mt76: add def_wcid to struct mt76_wcid wifi: mt76: mt7925: report link information in rx status wifi: mt76: mt7925: update rate index according to link id wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change ... ==================== Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+7
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/aquantia/aquantia.h 219343755eae ("net: phy: aquantia: add missing include guards") 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") drivers/net/ethernet/wangxun/libwx/wx_hw.c bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx") b501d261a5b3 ("net: txgbe: add FDIR ATR support") https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/ include/linux/mlx5/mlx5_ifc.h 048a403648fc ("net/mlx5: IFC updates for changing max EQs") 99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO") https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/ Adjacent changes: drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c 4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference") 3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard") include/net/mac80211.h 816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP") 5a009b42e041 ("wifi: mac80211: track changes in AP's TPE") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04wifi: iwlwifi: mvm: re-enable MLOMiri Korenblit1-1/+1
MLO was temporarily disabled by commit 5f404005055 ("wifi: iwlwifi: mvm: disable MLO for the time being"), until it will stabilize. Now, that all the bugs were fixed and the minimum FW version was bumped to a stable one, we can re-enable MLO back. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703132713.8f77a71c3902.Ib302054cbd8fba82db97eb5298b2aaf8bbe106df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-04wifi: iwlwifi: mvm: fix interface combinationsJohannes Berg1-2/+2
The NAN code referenced in this commit isn't actually present in the driver (any more), and the commit didn't add the extra NAN entry. Thus, the -1 is incorrect. Reported-by: Alexander Wetzel <Alexander@wetzel-home.de> Closes: https://lore.kernel.org/20240702104128.26394-1-Alexander@wetzel-home.de Fixes: 5c38bedac16a ("wifi: iwlwifi: mvm: unify and fix interface combinations") Link: https://patch.msgid.link/20240702130001.8c871a3f0b5a.I08a6542f52f63c5bd66bf3feb09e1998ce7c60e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-03wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereferenceMiri Korenblit1-2/+4
iwl_mvm_get_bss_vif might return a NULL or ERR_PTR. Some of the callers check only the NULL case, and some doesn't check at all. Some of the callers even have a pointer to the mvmvif of the bss vif, so we don't even need to call this function, and can simply get the vif from mvmvif. Do it for those cases, and for the others - properly check if IS_ERR_OR_NULL Fixes: ec0d43d26f2c ("wifi: iwlwifi: mvm: Activate EMLSR based on traffic volume") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064027.a661f8c65aac.I45cf09b01af8ee3d55828863958ead741ea43b7f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-03wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILLEmmanuel Grumbach1-4/+2
Since we now want to sync the queues even when we're in RFKILL, we shouldn't wake up the wait queue since we still expect to get all the notifications from the firmware. Fixes: 4d08c0b3357c ("wifi: iwlwifi: mvm: handle BA session teardown in RF-kill") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064027.be7a9dbeacde.I5586cb3ca8d6e44f79d819a48a0c22351ff720c9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-03wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCKDaniel Gabay1-1/+1
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command version in the firmware has advanced to 4, which prevents the flag from being set correctly, fix that. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064026.a0f162108575.If1a9785727d2a1b0197a396680965df1b53d4096@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-28wifi: mac80211: remove DEAUTH_NEED_MGD_TX_PREPJohannes Berg1-6/+6
This flag is annoying because it puts a lot of logic into mac80211 that could just as well be in the driver (only iwlmvm uses it) and the implementation is also broken for MLO. Remove the flag in favour of calling drv_mgd_prepare_tx() without any conditions even for the deauth-while-assoc case. The drivers that implement it can take the appropriate actions, which for the only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky than the implementation in mac80211 is anyway, and all others have no need and can just exit if info->was_assoc is set. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-27Merge tag 'wireless-next-2024-06-27' of ↵Jakub Kicinski1-50/+118
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Highlights this time are: - cfg80211/nl80211: * improvements for 6 GHz regulatory flexibility - mac80211: * use generic netdev stats * multi-link improvements/fixes - brcmfmac: * MFP support (to enable WPA3) - wilc1000: * suspend/resume improvements - iwlwifi: * remove support for older FW for new devices * fast resume (keeping the device configured) - wl18xx: * support newer firmware versions * tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits) wifi: brcmfmac: of: Support interrupts-extended wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 net: rfkill: Correct return value in invalid parameter case wifi: mac80211: fix NULL dereference at band check in starting tx ba session wifi: iwlwifi: mvm: fix rs.h kernel-doc wifi: iwlwifi: fw: api: datapath: fix kernel-doc wifi: iwlwifi: fix remaining mistagged kernel-doc comments wifi: iwlwifi: fix prototype mismatch kernel-doc warnings wifi: iwlwifi: fix kernel-doc in iwl-fh.h wifi: iwlwifi: fix kernel-doc in iwl-trans.h wifi: iwlwifi: pcie: fix kernel-doc wifi: iwlwifi: dvm: fix kernel-doc warnings wifi: iwlwifi: mvm: don't log error for failed UATS table read wifi: iwlwifi: trans: make bad state warnings wifi: iwlwifi: fw: api: fix some kernel-doc wifi: iwlwifi: mvm: remove init_dbg module parameter wifi: iwlwifi: update the BA notification API wifi: iwlwifi: mvm: always unblock EMLSR on ROC end wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API ... ==================== Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26wifi: iwlwifi: remove MVM prefix from scan APIDaniel Gabay1-4/+4
These are not MVM specific. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240625194805.09f672318944.Idffeab6a4dfc12effebd1c50815ae5c540afca74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: mvm: don't limit VLP/AFC to UATS-enabledJohannes Berg1-2/+1
When UATS isn't enabled (no VLP/AFC AP support), we need to still set the right bits in the channel/regulatory flags, so remove the uats_enabled argument to the parsing etc. Also, firmware deals just fine with getting the UATS table if it supports the command even if the bits aren't set, so always send it, since it's also needed if BIT(31) is set, but the driver need not have any knowledge of that. Remove 'uats_enabled' entirely. Fixes: 0d2fc8821a7d ("wifi: iwlwifi: nvm: parse the VLP/AFC bit from regulatory") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618195731.a81e7234c4f6.Ic0131180d38e0f1ead2f7fa0e7583407ceaa0bd1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: mvm: dissolve iwl_mvm_mac_remove_interface_common()Johannes Berg1-18/+3
Since the function isn't actually common (any more), just dissolve it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618194245.adf54ab5bc4a.I90339f152bba73b622e05063d16ae914ae20053f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: support fast resumeEmmanuel Grumbach1-4/+36
This will allow to suspend / resume the system without resetting the firmware. This will allow to reduce the resume time. In case the fast_resume fails, stop the device and bring it up from scratch. Raise the timeout for the D3_END notification since in some iterations, it took 240ms. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618194245.03b8d2801044.I613d17c712de7a0d611cde4e14f37ebbe0c3c964@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: mvm: unify and fix interface combinationsJohannes Berg1-15/+28
AP interfaces fundamentally cannot leave the channel, so multi- channel operation with them isn't really possible. We shouldn't advertise support for such, at least not as long as we don't have full multi-radio support. Thus, remove the AP bit from the interface combinations for two channels and add another set for just one channel that has it. Also, to avoid duplicating everything even more, unify the NAN and non-NAN cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618200104.3213638262ef.I2a0031b37623d7763fd0c5405477ea7206a3e923@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach1-1/+1
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c 1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error") 165f87691a89 ("bnxt_en: add timestamping statistics support") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-12wifi: iwlwifi: mvm: use ROC for P2P device activitiesShaul Triebitz1-1/+38
This is the first step towards removing the P2P Device MAC. Use ROC (which uses the AUX MAC) for P2P Device discoveribility and action frames. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: mvm: separate non-BSS/ROC EMLSR blockingJohannes Berg1-3/+7
If non-BSS and remain-on-channel (ROC) blocking were to occur simultaneously, they'd step on each other's toes, unblocking when not yet supported. Disentangle these bits, and ROC doesn't need to use the non_bss_link() function then. Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140556.461fcf7b95bb.Id0d21dcb739d426ff15ec068b5df8abaab58884d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: remove struct iwl_trans_opsYedidya Benshimol1-2/+0
This was needed when we had multiple types of transports. Now we only have pcie, so there is no need for this ops. Cleanup the code such as the different trans APIs will call the pcie function directly, instead of calling the callback, and remove struct iwl_trans_ops. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: mvm: fix ROC version checkShaul Triebitz1-1/+1
For using the ROC command, check that the ROC version is *greater or equal* to 3, rather than *equal* to 3. The ROC version was added to the TLV starting from version 3. Fixes: 67ac248e4db0 ("wifi: iwlwifi: mvm: implement ROC version 3") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140327.93d86cd188ad.Iceadef5a2f3cfa4a127e94a0405eba8342ec89c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski1-161/+79
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29wifi: iwlwifi: mvm: handle BA session teardown in RF-killJohannes Berg1-1/+1
When entering RF-kill, mac80211 tears down BA sessions, but due to RF-kill the commands aren't sent to the device. As a result, there can be frames pending on the reorder buffer or perhaps even received while doing so, leading to warnings. Avoid the warnings by doing the BA session teardown normally even in RF-kill, which also requires queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: remove stale STA link data during restartBenjamin Berg1-0/+37
If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: handle TPE advertised by APJohannes Berg1-0/+11
6 GHz BSS SP client shall respect TX power limits advertised by the AP in TPE elements, send the data to the firmware using the AP_TX_POWER_CONSTRAINTS_CMD command, so do that. Co-developed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.32f1e2e1447c.I58ac91c38585362aa42bb4a8a59c7d88e67bc40b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: move a constant to constants.hMiri Korenblit1-2/+0
Move IWL_MVM_MIN_BEACON_INTERVAL_TU to constants.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.395f5b24ff82.Id78a5a404c3ae15cbbc950b1f1d7e500a8b92a43@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: move code from iwl-eeprom-parse to dvmEmmanuel Grumbach1-1/+1
Move code that is DVM only to dvm. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.9a1b6ef116e0.I217a513f544d5288a7760d265f51419e81abfd9d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: mvm: add mvm-specific guardJohannes Berg1-158/+67
Add and use an mvm-specific guard for the mvm mutex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.7391425b3af2.I1b109f56753dd3f35602dd2c5cf6e1e35aee313d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: record and return channel survey informationBenjamin Berg1-4/+67
While doing a passive scan, the firmware will report per-channel survey information. This information is primarily useful for hostapd when doing an ACS (Automatic Channel Selection). Collect this information and add it to the result set when getting the survey information. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.9287591a5999.I54a3f9f6480d3694e67eea1cb4f5853beace2780@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Fix race in scan completionIlan Peer1-0/+1
The move of the scan complete notification handling to the wiphy worker introduced a race between scan complete notification and scan abort: - The wiphy lock is held, e.g., for rfkill handling etc. - Scan complete notification is received but not handled yet. - Scan abort is triggered, and scan abort is sent to the FW. Once the scan abort command is sent successfully, the flow synchronously waits for the scan complete notification. However, as the scan complete notification was already received but not processed yet, this hangs for a second and continues leaving the scan status in an inconsistent state. - Once scan complete handling is started (when the wiphy lock is not held) since the scan status is not an inconsistent state, a warning is issued and the scan complete notification is not handled. To fix this issue, switch back the scan complete notification to be asynchronously handling, and only move the link selection logic to a worker (which was the original reason for the move to use wiphy lock). While at it, refactor some prints to improve debug data. Fixes: 07bf5297d392 ("wifi: iwlwifi: mvm: Implement new link selection algorithm") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1f484a86324b.I63ed445a47f144546948c74ae6df85587fdb4ce3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: don't reset link selection during restartJohannes Berg1-3/+6
After restart, we might want to end up with the same config as before, even for multi-link/EMLSR. Therefore, don't reset the stored link selection result in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.e81db303f1dc.Ie8267082f623d14376a2052d222e18da6545f34b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is activeYedidya Benshimol1-2/+4
When there's an active link in a non-station vif, the station vif is not allowed to enter EMLSR Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule an exit from EMLSR worker, but the worker cannot run before the activation of the non-BSS link, as ieee80211_remain_on_channel already holds the wiphy mutex. Handle that by explicitly calling ieee80211_set_active_links() to leave EMLSR, and then doing iwl_mvm_block_esr() only for consistency and to avoid re-entering it before ready. Note that a call to ieee80211_set_active_links requires to release the mvm mutex, but that's ok since we still hold the wiphy lock. The only thing that might race here is the ESR_MODE_NOTIF, so this changes its handler to run under the wiphy lock. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR when CSA happensJohannes Berg1-23/+25
If CSA is happening, then exit EMLSR to keep the better link, which is the primary link unless that's doing the CSA with quiet. This is done because we can't transmit the OMN frame on a quiet link, but want to exit EMLSR during CSA for better beacon reception, so we can follow the switch accurately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: consider FWs recommendation for EMLSRMiri Korenblit1-0/+3
FW sends a notification indicating whether activating EMLSR mode is recommended or not. Support the notification and enter EMLSR only if recommended. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.2fd3387882eb.I7a8a5b24658744ed732bfc03b1872c9298483d62@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Activate EMLSR based on traffic volumeMiri Korenblit1-0/+21
Adjust EMLSR activation to account for traffic levels. By tracking the number of RX/TX MPDUs, EMLSR will be activated only when traffic volume meets the required threshold. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: trigger link selection after exiting EMLSRMiri Korenblit1-2/+24
If the reason for exiting EMLSR was a blocking reason, wait for the corresponding unblocking event: - if there is an ongoing scan - do nothing. Link selection will be triggered at the end of it. - If more than 30 seconds passed since the exit, trigger MLO scan, which will trigger link selection - If less then 30 seconds passed since exit, reuse the latest link selection result If the reason for exiting EMLSR was an exit reason (IWL_MVM_EXIT_*), schedule MLO scan in 30 seconds. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240505091420.6a808c4ae8f5.Ia79605838eb6deee9358bec633ef537f2653db92@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: cleanup EMLSR when BT is active handlingMiri Korenblit1-20/+0
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the vif from using EMLSR with a different link pair. In addition, storing it in mvmvif:disable_esr_reason requires extracting the BT Coex bit before checking if EMLSR is blocked or not for a specific vif. Therefore, change the BT Coex bit to be an exit reason and not a blocker. On link selection, EMLSR mode will be re-calculated for the 2.4 GHz link instead of checking that bit. While at it, move the relevant function declarations to the EMLSR functions area in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: get periodic statistics in EMLSRMiri Korenblit1-0/+4
In EMLSR we need to track the RSSI of both links, and exit if the RSSI of one of the links got too low. For that request the FW to send statistics every 5 seconds when in EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.6e19d596d77f.Ica2a75a031b1bced0dc2e18c5d365b5eb0d3ec07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.Miri Korenblit1-0/+25
Address scenarios where repeated entry and exit from EMLSR occur, such as encountering missed beacons on a specific link, while still discovering that link during a scan. To mitigate this, introduce the EMLSR prevention mechanism, which operates as follows: - On each exit from EMLSR event, record the timestamp and the exit reason. - If two consecutive exits happen for the same reason within a 400-second window, enforce a 300-second EMLSR prevention. - If a third exit for the same reason occurs within 400 seconds from the second exit, enforce an extended EMLSR prevention of 600 seconds. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d820ee98b300.I6406db40cf25eabdba602afd783466473b909216@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: init vif works only onceJohannes Berg1-2/+17
It's dangerous to re-initialize works repeatedly, especially delayed ones that have an associated timer, and even more so if they're not necessarily canceled inbetween. This can be the case for these workers here during FW restart scenarios, so make sure to initialize it only once. While at it, also ensure it is cancelled correctly. Fixes: f67806140220 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.ddf8eece5eac.I4164f5c9c444b64a9abbaab14c23858713778e35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Implement new link selection algorithmMiri Korenblit1-2/+7
Replaces the current logic with a new algorithm based on the link grading introduced in a previous patch. The new selection algorithm will be invoked upon successful scan to ensure it has the necessary updated data it needs. This update delegates the selection logic as the primary link determiner in EMLSR mode, storing it in mvmvif to avoid repeated calculations, as the result may vary. Additionally, includes tests for iwl_mvm_valid_link_pair to validate link pairs for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.