aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/constants.h
AgeCommit message (Collapse)AuthorFilesLines
2024-08-27wifi: iwlwifi: mvm: exit EMLSR if both links are missing beaconsEmmanuel Grumbach1-1/+2
If both links are missing 5 beacons, we need to exit EMLSR, if only one link misses beacons, we need to wait until 11 beacons are missed. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240808232017.b7785943a4fe.I70a459c5e7db85f398d5795ba83bb15f65d6bf9d@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: increase the time between ranging measurementsAvraham Stern1-1/+1
The algo running in fw may take a little longer than 5 milliseconds, (e.g. measurement on 80MHz while associated). Increase the minimum time between measurements to 7 milliseconds. Fixes: 830aa3e7d1ca ("iwlwifi: mvm: add support for range request command version 13") Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-06-26wifi: iwlwifi: mvm: remove IWL_MVM_PARSE_NVMMiri Korenblit1-1/+0
This debug is not in use anymore. Remove it. Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Link: https://patch.msgid.link/20240618194245.bded22049fae.I980c4a941d769f93cf74bfc90a7d7d9fb384dea1@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: add support for version 14 of the range request commandAvraham Stern1-0/+1
This version adds a testing option to send an incorrect SAC in the first NDPA. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240527190228.8f36ccb1cc74.I9b76461634f308e75dc3cd016d0b0bce812c6e9d@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: move a constant to constants.hMiri Korenblit1-0/+1
Move IWL_MVM_MIN_BEACON_INTERVAL_TU to constants.h Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240527190228.395f5b24ff82.Id78a5a404c3ae15cbbc950b1f1d7e500a8b92a43@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: remove IWL_MVM_USE_NSSN_SYNCMiri Korenblit1-1/+0
This is not used and not needed anymore. Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240527190228.c5edfb967e35.I34a3d54a1dc90d9b2937b0bcbbc508fe3cd41773@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-29wifi: iwlwifi: mvm: Enable p2p low latencyAvri Altman1-1/+1
Enable p2p low latency by default. Signed-off-by: Avri Altman <[email protected]> Reviewed-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240527190228.21b431bdfc26.I018e330d1e6a76e967b25e9542c2260f0f6ed2a8@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-06wifi: iwlwifi: mvm: Activate EMLSR based on traffic volumeMiri Korenblit1-0/+2
Adjust EMLSR activation to account for traffic levels. By tracking the number of RX/TX MPDUs, EMLSR will be activated only when traffic volume meets the required threshold. Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-05-06wifi: iwlwifi: mvm: trigger link selection after exiting EMLSRMiri Korenblit1-0/+1
If the reason for exiting EMLSR was a blocking reason, wait for the corresponding unblocking event: - if there is an ongoing scan - do nothing. Link selection will be triggered at the end of it. - If more than 30 seconds passed since the exit, trigger MLO scan, which will trigger link selection - If less then 30 seconds passed since exit, reuse the latest link selection result If the reason for exiting EMLSR was an exit reason (IWL_MVM_EXIT_*), schedule MLO scan in 30 seconds. Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Ilan Peer <[email protected]> Link: https://msgid.link/20240505091420.6a808c4ae8f5.Ia79605838eb6deee9358bec633ef537f2653db92@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-04-19wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is lowMiri Korenblit1-0/+9
If the RSSI of a link is low enough, don't use it for EMLSR. If EMLSR is already active and the RSSI of one of the links gets low, exit EMLSR by deactivating that link. Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240416134215.73263c000263.Ieb2b18855a2719b5e18ad2fa8a3e855ca4e23938@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-04-19wifi: iwlwifi: mvm: exit EMLSR upon missed beaconMiri Korenblit1-1/+2
In case of more than 6 missed beacons on one of the links, exit EMLSR by deactivating that link. Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240416134215.f9111c79cb53.Ie95ea60149a9bc4367f6b338b37c8635051351ba@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-02wifi: iwlwifi: disable eSR when BT is activeMiri Korenblit1-0/+3
eSR should be disabled when BT Coex is active and: - LB link is the primary link. - LB link is the secondary link and the predicted BT penalty (the wifi loss rate caused by BT interference) is higher than a given threshold. If one of the conditions above is no longer true then re-enable eSR. In order to implement this, add support for version 5 of BT_PROFILE_NOTIFICATION, in which the bt penalty is provided by FW. Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Gregory Greenman <[email protected]> Link: https://msgid.link/20240131225342.b922b6485af8.I7d808ce535a7372aca9cb85c045755e6788a4904@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: iwlwifi: mvm: Add basic link selection logicIlan Peer1-0/+1
Add simple logic that would allow using EMLSR in case there are multiple valid links: - In case the connection establishment has just been completed try to find a valid link pair for EMLSR functionality where one of the links in the pair is the current active link. - In case the valid links changed after connection was already established, try to find a valid link pair for EMLSR functionality, in case the EMSLR is not active yet. If a valid link pair is found call mac80211 to asynchronously set the new link pair, otherwise continue using the current active links. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20231004123422.0c7b89ab29c2.I6600bd16551d75e2bf520d8d0add525568a9f85f@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-09-13wifi: iwlwifi: mvm: move listen interval to constantsJohannes Berg1-0/+1
This can be moved to constants, while at it also rename it to have a better name with MVM_ prefix. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230913145231.59823deebfda.Ied68b11ca40771d1cfc8c82ee8f9f2b9ea27da65@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-19wifi: iwlwifi: implement WPFC ACPI table loadingJohannes Berg1-5/+1
We skipped this in the past, but now we will need it for some platforms. Implement loading the PHY filter configuration IDs from the WPFC ACPI table. Note that the firmware must also be aware of the right filter configuration IDs (they're just the IDs of a filter configuration, not the actual configuration). Remove the useless hardcoded zeroes while at it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-12-21iwlwifi: mvm: change old-SN drop thresholdJohannes Berg1-1/+1
Increment the threshold to avoid dropping too eagerly. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0e947ed458c4.Ia376cbea5f59df4b4474f0bd33ab033e84535cce@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: add support for range request command version 13Avraham Stern1-1/+4
This version adds the following configuration options: 1. Set the BSS color for NDP ranging 2. Set the minimum and maximum time between measurements for non trigger based NDP ranging. 3. Terminate the session in case the responder requests LMR feedback. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.9dcd5210b7e5.I76f6977cde852de0f251344e279ad85076eef8d6@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: Add support for 6GHz passive scanIlan Peer1-0/+2
When doing scan while 6GHz channels are not enabled, the 6GHz band is not scanned. Thus, if there are no APs on the 2GHz and 5GHz bands (that will allow discovery of geographic location etc. that would allow enabling the 6GHz channels) but there are non collocated APs on 6GHz PSC channels these would never be discovered. To overcome this, FW added support for performing passive UHB scan in case no APs were discovered during scan on the 2GHz and 5GHz channels. Add support for enabling such scan when the following conditions are met: - 6GHz channels are supported but not enabled by regulatory. - Station interface is not associated or less than a defined time interval passed from the last resume or HW reset flows. - At least 4 channels are included in the scan request - The scan request includes the widlcard SSID. - At least 50 minutes passed from the last 6GHz passive scan. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.7c7bd00e0aeb.Ib226ad57e416b43a710c36a78a617d4243458b99@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: responder: support responder config command version 8Avraham Stern1-0/+2
Version 8 add NDP ranging parameters configuration, as well as enable/disable NDP ranging and LMR feedback. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.ce9570d755d3.Ic81cb8da9aecbbc9edff468cb4ffbb741418cc73@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: support range request command version 12Avraham Stern1-0/+7
Version 12 adds configuration of NDP ranging parameters: - max number of LTF repetitions - max number of spatial streams - max total LTFs Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.2c30c376c5cf.I01460f7277594ee7c98a8e1fe5447c59e70bf073@changeid Signed-off-by: Luca Coelho <[email protected]>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-63/+6
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <[email protected]>
2020-12-10iwlwifi: remove sw_csum_txEmmanuel Grumbach1-1/+0
This was a hack done to test the data path of devices that didn't support well CSUM offload in Tx. This is not needed anymore. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6c9fc9fb48d5.I2aaebf90e6fe81860105d049a8d35746fa8d86c2@changeid Signed-off-by: Luca Coelho <[email protected]>
2020-12-10iwlwifi: mvm: add support for 6GHzLuca Coelho1-0/+1
Add support to the 6GHz band (aka. Ultra High Band or UHB). This allows us to scan and connect to channels in that band, including all the relevant features, such as preferred scan channels, colocated channels etc. Co-developed-by: Haim Dreyfuss <[email protected]> Signed-off-by: Haim Dreyfuss <[email protected]> Co-developed-by: Ilan Peer <[email protected]> Signed-off-by: Ilan Peer <[email protected]> Co-developed-by: Tova Mussai <[email protected]> Signed-off-by: Tova Mussai <[email protected]> Co-developed-by: Andrei Otcheretianski <[email protected]> Signed-off-by: Andrei Otcheretianski <[email protected]> Co-developed-by: Tali Levi Rovinsky <[email protected]> Signed-off-by: Tali Levi Rovinsky <[email protected]> Co-developed-by: Avraham Stern <[email protected]> Signed-off-by: Avraham Stern <[email protected]> Co-developed-by: Ayala Beker <[email protected]> Signed-off-by: Ayala Beker <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201210000657.0fdbfc3d7352.Idb648536faf21716e2ab2c6d6890d3e49f719cd3@changeid Signed-off-by: Luca Coelho <[email protected]>
2020-10-01iwlwifi: mvm: Add FTM initiator RTT smoothing logicIlan Peer1-0/+6
The overcome instabilities in the RTT results add smoothing logic to the reported results. In short, the smoothing logic tracks the RTT average of each responder for a period of time, and in case a new RTT results is found to be a spur, the tracked RTT average is reported instead of the current RTT measurement. Smooth logic debug configuration using iwl-dbg-cfg.ini: - MVM_FTM_INITIATOR_ENABLE_SMOOTH: Set to 1 to enable smoothing logic (default=0). - MVM_FTM_INITIATOR_SMOOTH_ALPHA: A value between 0 - 100, defining the weight of the current RTT results vs. the RTT average tracked based on the previous results. A value of 100 means use only the current RTT results. - MVM_FTM_INITIATOR_SMOOTH_AGE_SEC: The maximal time in seconds in which the RTT average tracked based on previous results is considered valid. - MVM_FTM_INITIATOR_SMOOTH_UNDERSHOOT: if the current RTT is positive and below the RTT average by at least this value, report the average RTT instead of the current one. In units of picoseconds. - MVM_FTM_INITIATOR_SMOOTH_OVERSHOOT: if the current RTT is positive and above the RTT average by at least this value, report the average RTT instead of the current one. In units of picoseconds. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200930161256.48a9cec2081b.Iaec1e29f738232adfe9e2ea8e9eb9b6ff0323ae1@changeid Signed-off-by: Luca Coelho <[email protected]>
2020-10-01iwlwifi: enable twt by defaultGolan Ben Ami1-1/+1
TWT has been disabled during stabilization and further testing of the FW code. It is now considered stable, so TWT can be enabled in the driver. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200928093526.44c9093fc632.I181fc5c80988e7ecea281c60e57a22ae7ec86716@changeid Signed-off-by: Luca Coelho <[email protected]>
2020-04-24iwlwifi: mvm: add framework for specific phy configurationGil Adam1-0/+4
Add framework for supporting specific PHY filter configuration, which allows for application of various FW defined PHY filters (one per antenna). Change phy_cfg_cmd to the new API (ver3). Reading of configuration from platform's ACPI tables to be added later when tables are defined. Signed-off-by: Gil Adam <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.242a8f979592.I13c77a8a8dbf1a169b5052c7af1f8401ff3991ad@changeid
2020-01-22iwlwifi: mvm: don't send the IWL_MVM_RXQ_NSSN_SYNC notif to Rx queuesEmmanuel Grumbach1-0/+1
The purpose of this was to keep all the queues updated with the Rx sequence numbers because unlikely yet possible situations where queues can't understand if a specific packet needs to be dropped or not. Unfortunately, it was reported that this caused issues in our DMA engine. We don't fully understand how this is related, but this is being currently debugged. For now, just don't send this notification to the Rx queues. This de-facto reverts my commit 3c514bf831ac12356b695ff054bef641b9e99593: iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues This issue was reported here: https://bugzilla.kernel.org/show_bug.cgi?id=204873 https://bugzilla.kernel.org/show_bug.cgi?id=205001 and others maybe. Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues") CC: <[email protected]> # 5.3+ Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-06iwlwifi: mvm: drop BA sessions on too many old-SN framesJohannes Berg1-0/+1
Certain APs (I think a certain Broadcom model) interact badly with our full state BA bitmap handling, and if triggered badly with many powersave transitions they keep sending frames from before the window, which our hardware then doesn't appear to ACK (to them) since it has moved on and is sending ACKs for higher SNs now. Try to detect this situation and if this keeps happening, disable the aggregation session. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-06-29iwlwifi: mvm: make the usage of TWT configurableEmmanuel Grumbach1-0/+1
TWT is still very new and we expect issues. Make its usage configurable and disable it by default. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-20iwlwifi: mvm: support non-transmitting APSara Sharon1-0/+1
Add an option to not send beacons and probe responses. This is used for testing multiple-bssid. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: mvm: add a debug_enable opShahar S Matityahu1-0/+3
D3 debug data is disabled by default. Currently it is done by tampering the dump mask. Add an operation that will allow this to be changed without recompilation. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: mvm: support FTM initiatorJohannes Berg1-0/+3
Add support for FTM initiator, i.e. peer measurements with FTM if the firmware supports FTM. Additionally, add two defines we depend on in include/linux/ieee80211.h. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho1-5/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <[email protected]>
2018-04-20iwlwifi: mvm: detect U-APSD breaking aggregationJohannes Berg1-0/+4
Try to detect that the AP is not using aggregation even when there's enough traffic to make it worthwhile; if this is the case and U-APSD is enabled then assume the AP is broken (like so many) and doesn't enable aggregation when U-APSD is used. In this case, disconnect from the AP and blacklist U-APSD for a potential new connection to it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-04-20iwlwifi: mvm: add traffic condition monitoring (TCM)Luca Coelho1-0/+3
Traffic condition monitor gathers data about the traffic load and other conditions and can be used to make decisions regarding latency, throughput etc. This patch introduces the code and data structures to collect this data for future use. Signed-off-by: Luca Coelho <[email protected]>
2018-03-28iwlwifi: mvm: add adaptive dwell supportZamir, Roee1-0/+2
Update the scan command API with support for adaptive dwell. Adaptive dwell is a type of scan that dynamically changes the time it remains on each channel listening for beacons or probe responses. Signed-off-by: Roee Zamir <[email protected]> Signed-off-by: Beni Lev <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-08-18iwlwifi: mvm: change open and close criteria of a BA sessionGregory Greenman1-0/+1
Tx BA session should be started according to the current throughput without any dependence on the internal rate scaling state. The criteria for opening a BA session will be 10 frames per second. Sending frequent del BAs can cause inter-op issues with some APs. We'll not close a BA session until we receive an explicit del BA from the peer. Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-08-18iwlwifi: mvm: remove the corunning supportEmmanuel Grumbach1-1/+0
The corunning block was supposed to help in coex scenarios. It required the driver to configure the firmware based on the coupling between the two antennas of the devices. This was never in use and the configuration sent by the driver has always been blank. Remove all that code. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-08-01iwlwifi: mvm: add compile-time option to disable EBSZamir, Roee1-0/+1
For testing purposes, we may want to disable EBS scans at compile time. Signed-off-by: Roee Zamir <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-08-01iwlwifi: refactor firmware debug codeJohannes Berg1-1/+0
Split out the firmware debug code to be more general, so that it can be used by different subdrivers. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: support old method of NVM parsingSara Sharon1-0/+1
Add configuration for allowing driver's nvm parsing and bypassing the new host command, for debugging. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2016-05-10iwlwifi: mvm: add a flag to disable checksumSara Sharon1-0/+1
Add a constant to allow disabling checksum. This will enable easier debugging in early phases. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2016-03-30iwlwifi: make uapsd_disable module param a bitmapEmmanuel Grumbach1-1/+0
This allows to disable uapsd for BSS only, or P2P client separately. Remove the now unneeded IWL_MVM_P2P_UAPSD_STANDALONE constant. Signed-off-by: Emmanuel Grumbach <[email protected]>
2016-02-01iwlwifi: mvm: make collecting fw debug data optionalGolan Ben-Ami1-2/+5
Slow platforms may have issues with dumping data upon firmware assert. Make it easier to disable it for those platform. Signed-off-by: Golan Ben-Ami <[email protected]> Signed-off-by: Emmanuel Grumbach <[email protected]>
2016-02-01iwlwifi: mvm: Add P2P client snoozingAvri Altman1-0/+1
Enable snoozing and U-APSD on P2P client. The firwmare will support this only if the BSS vif is not associated. Make this configurable by a constant variable and disable it by default. Signed-off-by: Avri Altman <[email protected]> Signed-off-by: Emmanuel Grumbach <[email protected]>
2015-12-20iwlwifi: pcie: allow to pretend to have Tx CSUM for debugEmmanuel Grumbach1-0/+1
Allow to configure the driver to pretend to have TX CSUM offload support. This will be useful to test the TSO flows that will come in further patches. This configuration is disabled by default. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Emmanuel Grumbach <[email protected]>
2015-12-20iwlwifi: change the Intel Wireless email addressEmmanuel Grumbach1-1/+1
[email protected] is not available anymore. [email protected] should be used instead. Signed-off-by: Emmanuel Grumbach <[email protected]>
2015-11-18iwlwifi: move under intel vendor directoryKalle Valo1-0/+139
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.