aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2024-10-25Merge tag 'wireless-2024-10-21' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless wireless fixes for v6.12-rc5 The first set of wireless fixes for v6.12. We have been busy and have not been able to send this earlier, so there are more fixes than usual. The fixes are all over, both in stack and in drivers, but nothing special really standing out.
2024-10-17wifi: brcm80211: BRCM_TRACING should depend on TRACINGGeert Uytterhoeven1-0/+1
When tracing is disabled, there is no point in asking the user about enabling Broadcom wireless device tracing. Fixes: f5c4f10852d42012 ("brcm80211: Allow trace support to be enabled separately from debug") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/81a29b15eaacc1ac1fb421bdace9ac0c3385f40f.1727179742.git.geert@linux-m68k.org
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro6-6/+6
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-27[tree-wide] finally take no_llseek outAl Viro1-1/+0
no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\<no_llseek\>/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-09wifi: brcmfmac: cfg80211: Convert comma to semicolonChen Ni1-1/+1
Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240904074637.1352864-1-nichen@iscas.ac.cn
2024-09-04Merge tag 'wireless-next-2024-09-04' of ↵Jakub Kicinski11-72/+66
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== pull-request: wireless-next-2024-09-04 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. ==================== Conflicts: drivers/net/wireless/ath/ath12k/hw.c 38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850") 8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only") https://lore.kernel.org/87msldyj97.fsf@kernel.org Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03wifi: brcmsmac: Use kvmemdup to simplify the codeJinjie Ruan1-4/+2
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code. No functional change. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240821070257.2298559-1-ruanjinjie@huawei.com
2024-08-10wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletionJanne Grunau1-3/+10
wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID. Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Cc: stable@vger.kernel.org # 6.4.x Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Neal Gompa <neal@gompa.dev> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240803-brcmfmac_pmksa_del_ssid-v1-1-4e85f19135e1@jannau.net
2024-08-07wifi: b43: Constify struct lpphy_tx_gain_table_entryChristophe JAILLET2-11/+11
'struct lpphy_tx_gain_table_entry' are not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 16481 6232 0 22713 58b9 drivers/net/wireless/broadcom/b43/tables_lpphy.o After: ===== text data bss dec hex filename 22305 395 0 22700 58ac drivers/net/wireless/broadcom/b43/tables_lpphy.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-By: Michael Büsch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/e33bc9e6dff4a5b6cd8d0ab5399aa1abac5bef9d.1722753127.git.christophe.jaillet@wanadoo.fr
2024-08-04wifi: brcmsmac: clean up unnecessary current_ampdu_cnt and related checksDmitry Kandybka1-21/+1
In 'brcms_c_ffpld_check_txfunfl()', 'current_ampdu_cnt' is hardcoded to zero, so 'txunfl_ratio' is always zero as well and some dead code can be removed. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240801101531.6626-1-d.kandybka@gmail.com
2024-08-04wifi: brcmfmac: introducing fwil query functionsArend van Spriel5-28/+48
When the firmware interface layer was refactored it provided various "get" and "set" functions. For the "get" in some cases a parameter needed to be passed down to firmware as a key indicating what to "get" turning the output parameter of the "get" function into an input parameter as well. To accommodate this the "get" function blindly copies the parameter which in some places resulted in an uninitialized warnings from the compiler. These have been fixed by initializing the input parameter in the past. Recently another batch of similar fixes were submitted to address clang static checker warnings [1]. Proposing another solution by introducing a "query" variant which is used when the (input) parameter is needed by firmware. The "get" variant will only fill the (output) parameter with the result received from firmware taking care of proper endianess conversion. [1] https://lore.kernel.org/all/20240702122450.2213833-1-suhui@nfschina.com/ Fixes: 81f5dcb80830 ("brcmfmac: refactor firmware interface layer.") Reported-by: Su Hui <suhui@nfschina.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240727185617.253210-1-arend.vanspriel@broadcom.com
2024-08-04wifi: brcmfmac: fwsignal: Use struct_size() to simplify brcmf_fws_rxreorder()Christophe JAILLET2-8/+4
In the "struct brcmf_ampdu_rx_reorder", change the 'pktslots' field into flexible array. It saves the size of a pointer when the memory is allocated and avoids an indirection when the array is used. It also removes the usage of a pointer arithmetic and saves a few lines of code. Finally, struct_size() can be used. It is not a must have here, because it is easy to see that buf_size can not overflow, but still, it is a good practice. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/f4ca6b887ca1290c71e76247218adea4d1c42442.1721547559.git.christophe.jaillet@wanadoo.fr
2024-06-26wifi: brcmfmac: of: Support interrupts-extendedAlex Bee1-2/+3
The currently existing of_property_present check for interrupts does not cover all ways interrupts can be defined in a device tree, e.g. "interrupts-extended". In order to support all current and future ways that can be done, drop that check and call of_irq_parse_one to figure out if an interrupt is defined and irq_create_of_mapping for the actual mapping and let it be handled by the interrupt subsystem. Signed-off-by: Alex Bee <knaerzche@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240622215416.659208-1-knaerzche@gmail.com
2024-06-26wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3Arend van Spriel1-0/+1
After being asked about support for WPA3 for BCM43224 chipset it was found that all it takes is setting the MFP_CAPABLE flag and mac80211 will take care of all that is needed [1]. Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Reijer Boekhoff <reijerboekhoff@protonmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach3-3/+3
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: brcmfmac: use 'time_left' variable with wait_event_timeout()Wolfram Sang1-5/+5
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_event_timeout() causing patterns like: timeout = wait_event_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Fix to the proper variable type 'long' while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240603091541.8367-3-wsa+renesas@sang-engineering.com
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski15-53/+41
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01wifi: brcm80211: remove unused structsDr. David Alan Gilbert2-11/+0
'brcmf_pcie_core_info' was added in commit 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") but never used. 'brcms_c_bit_desc' last use was removed in commit cdf4352f5c59 ("brcmsmac: Improve tx trace and debug support"). Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240526234553.286773-1-linux@treblig.org
2024-06-01wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)Erick Archer14-33/+32
It is preferred to use sizeof(*pointer) instead of sizeof(type) due to the type of the variable can change and one needs not change the former (unlike the latter). This patch has no effect on runtime behavior. At the same time remove some redundant NULL initializations. Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Erick Archer <erick.archer@outlook.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/AS8PR02MB7237FF1C2E880D1231684D708BF02@AS8PR02MB7237.eurprd02.prod.outlook.com
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)4-7/+7
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-18Merge tag 'kbuild-v6.10' of ↵Linus Torvalds6-15/+15
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-16Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds1-1/+0
Pull MMC updates from Ulf Hansson: "MMC core: - Increase the timeout period of the ACMD41 command - Add card entry for quirks to debugfs - Add mmc_gpiod_set_cd_config() function - Store owner from SDIO modules with sdio_register_driver() MMC host: - atmel-mci: Some cleanups and a switch to use dev_err_probe() - renesas_sdhi: - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants - Set the SDBUF after reset - sdhci: Add support for "Tuning Error" interrupts - sdhci-acpi: - Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA - Disable write protect detection on Toshiba WT10-A - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working - sdhci_am654: - Re-work and fix the tuning support for multiple speed-modes - Add tuning algorithm for delay chain - sdhci-esdhc-imx: Add NXP S32G3 support - sdhci-of-dwcmshc: - Add tuning support for Sophgo CV1800B and SG200X - Implement SDHCI CQE support - sdhci-pci-gli: Use the proper pci_set_power_state() instead of PMCSR writes" MEMSTICK: - Convert a couple of drivers to use the ->remove_new() callback" * tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list mmc: renesas_sdhi: Set the SDBUF after reset mmc: core: Increase the timeout period of the ACMD41 command mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too mmc: atmel-mci: Switch to use dev_err_probe() mmc: atmel-mci: Incapsulate used to be a platform data into host structure mmc: atmel-mci: Replace platform device pointer by generic one mmc: atmel-mci: Use temporary variable for struct device mmc: atmel-mci: Get rid of platform data leftovers mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning mmc: sdhci-s3c: Choose sdhci_ops based on variant mmc: sdhci_am654: Constify struct sdhci_ops mmc: sdhci-sprd: Constify struct sdhci_ops mmc: sdhci-omap: Constify struct sdhci_ops mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops mmc: slot-gpio: Use irq_handler_t type mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA ...
2024-05-14wifi: brcmsmac: LCN PHY code is used for BCM4313 2G-only deviceSamasth Norway Ananda1-9/+9
The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will never be set to 1 as BCM4313 is the only device for which the LCN PHY code is used. This is a 2G-only device. Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com
2024-05-10kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada6-15/+15
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-04-26wifi: brcmfmac: remove unused brcmf_usb_image structChristophe JAILLET1-7/+0
struct brcmf_usb_image was added in the initial commit 71bb244ba2fd5 ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") and updated in commit 803599d40418 ("brcmfmac: store usb fw images in local linked list.") Its only usage was removed in commit 52f98a57d8c1 ("brcmfmac: remove firmware list from USB driver"). Remove the structure definition now. This saves a few lines of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/23afd8c1733ad087ce2399a07a30d689aef861d5.1714039373.git.christophe.jaillet@wanadoo.fr
2024-04-26wifi: brcmsmac: ampdu: remove unused cb_del_ampdu_pars structChristophe JAILLET1-6/+0
struct cb_del_ampdu_pars was added in the initial commit 5b435de0d7868 ("net: wireless: add brcm80211 drivers") and its only usage was removed in commit e041f65d5f00 ("brcmsmac: Remove internal tx queue"). Remove the structure definition now. This saves a few lines of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/fa3b190b6e9cba65ecc36fc93121c6ed8704f704.1714036681.git.christophe.jaillet@wanadoo.fr
2024-04-10wifi: brcmfmac: Fix spelling mistake "ivalid" -> "invalid"Colin Ian King1-3/+3
There are spelling mistakes in bphy_err() messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240401215402.1348565-1-colin.i.king@gmail.com
2024-04-04wifi: brcm80211: drop driver owner initializationKrzysztof Kozlowski1-1/+0
Core in sdio_register_driver() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/20240403-module-owner-sdio-v2-5-ae46d6b955eb@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-03-21wifi: b43: Convert sprintf/snprintf to sysfs_emitLi Zhijian2-19/+10
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: Larry Finger <Larry.Finger@lwfinger.net> CC: Kalle Valo <kvalo@kernel.org> CC: linux-wireless@vger.kernel.org CC: b43-dev@lists.infradead.org Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240315055211.1347548-2-lizhijian@fujitsu.com
2024-03-12wifi: brcmfmac: pcie: handle randbuf allocation failureDuoming Zhou1-5/+10
The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow. Fixes: 91918ce88d9f ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240306140437.18177-1-duoming@zju.edu.cn
2024-03-05wifi: brcm80211: handle pmk_op allocation failureDuoming Zhou1-0/+3
The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op. Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229103153.18533-1-duoming@zju.edu.cn
2024-02-28wifi: brcmsmac: silence sparse warningsJohannes Berg2-8/+10
sparse complains on this code about casts that lose bits due to the usage of bitwise not, but really we do want 16 bits only, so clarify that by using masks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240223114023.06e5ade90bcd.I41a0cbae1fa259cfbf5fa117ddfce908877475a2@changeid
2024-02-28wifi: b43: silence sparse warningsJohannes Berg2-5/+5
sparse complains on this code about casts that lose bits due to the usage of bitwise not, but really we do want 16 bits only, so clarify that by using masks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240223114023.c64e2d348453.Iccc4ace1116721a044e5f31f40ea7709e72145f3@changeid
2024-02-27wifi: brcmfmac: do not pass hidden SSID attribute as value directlyAlexey Berezhok1-4/+5
In brcmf_cfg80211_start_ap() do not assume that NL80211_HIDDEN_SSID_NOT_IN_USE is zero but prefer an explicit check instead. Use local variable 'closednet' to pass in function call and use for error message. Compile tested only. Addition for the commit f20073f50dfd1 ("wifi: brcmfmac: do not cast hidden SSID attribute value to boolean"). Signed-off-by: Alexey Berezhok <a@bayrepo.ru> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240222122923.46691-1-a@bayrepo.ru
2024-02-27wifi: brcmfmac: fweh: Fix boot crash on Raspberry Pi 4Gustavo A. R. Silva1-1/+1
Fix boot crash on Raspberry Pi by moving the update to `event->datalen` before data is copied into flexible-array member `data` via `memcpy()`. Flexible-array member `data` was annotated with `__counted_by(datalen)` in commit 62d19b358088 ("wifi: brcmfmac: fweh: Add __counted_by for struct brcmf_fweh_queue_item and use struct_size()"). The intention of this is to gain visibility into the size of `data` at run-time through its _counter_ (in this case `datalen`), and with this have its accesses bounds-checked at run-time via CONFIG_FORTIFY_SOURCE and CONFIG_UBSAN_BOUNDS. To effectively accomplish the above, we shall update the counter (`datalen`), before the first access to the flexible array (`data`), which was also done in the mentioned commit. However, commit edec42821911 ("wifi: brcmfmac: allow per-vendor event handling") inadvertently caused a buffer overflow, detected by FORTIFY_SOURCE. It moved the `event->datalen = datalen;` update to after the first `data` access, at which point `event->datalen` was not yet updated from zero (after calling `kzalloc()`), leading to the overflow issue. This fix repositions the `event->datalen = datalen;` update before accessing `data`, restoring the intended buffer overflow protection. :) Fixes: edec42821911 ("wifi: brcmfmac: allow per-vendor event handling") Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://gist.github.com/nathanchance/e22f681f3bfc467f15cdf6605021aaa6 Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/Zc+3PFCUvLoVlpg8@neat
2024-02-21wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 ProHans de Goede1-0/+9
The ACEPC W5 Pro HDMI stick contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: "brcmfmac43455-sdio.$(DEFAULT_STRING)-$(DEFAULT_STRING).txt" as nvram file which is both too generic and messy with the $ symbols in the name. The ACEPC W5 Pro uses the same Ampak AP6255 module as the ACEPC T8 and the nvram for the T8 is already in linux-firmware, so point the new DMI nvram filename quirk to the T8 nvram file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240216213649.251718-1-hdegoede@redhat.com
2024-02-16wifi: brcmsmac: avoid function pointer castsArnd Bergmann3-5/+5
An old cleanup went a little too far and causes a warning with clang-16 and higher as it breaks control flow integrity (KCFI) rules: drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c:64:34: error: cast from 'void (*)(struct brcms_phy *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 64 | brcms_init_timer(physhim->wl, (void (*)(void *))fn, | ^~~~~~~~~~~~~~~~~~~~ Change this one instance back to passing a void pointer so it can be used with the timer callback interface. Fixes: d89a4c80601d ("staging: brcm80211: removed void * from softmac phy") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240213100548.457854-1-arnd@kernel.org
2024-02-12wifi: brcmfmac: do not cast hidden SSID attribute value to booleanAlexey Berezhok1-1/+1
In 'brcmf_cfg80211_start_ap()', not assume that NL80211_HIDDEN_SSID_NOT_IN_USE is zero but prefer an explicit check instead. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Alexey Berezhok <a@bayrepo.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240208085121.2430-1-a@bayrepo.ru
2024-02-08wifi: mac80211: simplify non-chanctx driversJohannes Berg3-0/+12
There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08Merge wireless into wireless-nextJohannes Berg4-2/+7
There are some changes coming to wireless-next that will otherwise cause conflicts, pull wireless in first to be able to resolve that when applying the individual changes rather than having to do merge resolution later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-05wifi: brcmsmac: Drop legacy headerLinus Walleij1-1/+0
The driver is using all the modern abstractions to obtain and use GPIOs and the legacy <linux/gpio.h> header is unused, so drop it. Fixes: a8e59744e16b ("gpiolib: split linux/gpio/driver.h out of linux/gpio.h") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240131-descriptors-wireless-v1-3-e1c7c5d68746@linaro.org
2024-02-02wifi: brcmfmac: Adjust n_channels usage for __counted_byKees Cook1-2/+4
After commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by"), the compiler may enforce dynamic array indexing of req->channels to stay below n_channels. As a result, n_channels needs to be increased _before_ accessing the newly added array index. Increment it first, then use "i" for the prior index. Solves this warning in the coming GCC that has __counted_by support: ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info': ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req-> n_channels' may be undefined [-Wsequence-point] 3783 | req->channels[req->n_channels++] = chan; | ~~~~~~~~~~~~~~~^~ Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Ian Lin <ian.lin@infineon.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Hector Martin <marcan@marcan.st> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126223150.work.548-kees@kernel.org
2024-01-31wifi: brcmfmac: add linefeed at end of fileArend van Spriel1-1/+1
The following sparse warning was reported: drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: warning: no newline at end of file Fixes: 31343230abb1 ("wifi: brcmfmac: export firmware interface functions") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/all/20240125165128.7e43a1f3@kernel.org/ Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240128093057.164791-2-arend.vanspriel@broadcom.com
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for Broadcom WLANBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom FullMac WLAN drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-4-leitao@debian.org
2024-01-25Merge tag 'wireless-next-2024-01-25' of ↵Jakub Kicinski23-295/+483
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The first "new features" pull request for v6.9. We have only driver changes this time and most of them are for Realtek drivers. Really nice to see activity in Broadcom drivers again. Major changes: rtwl8xxxu * RTL8188F: concurrent interface support * Channel Switch Announcement (CSA) support in AP mode brcmfmac * per-vendor feature support * per-vendor SAE password setup rtlwifi * speed up USB firmware initialisation * tag 'wireless-next-2024-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits) wifi: iwlegacy: Use kcalloc() instead of kzalloc() wifi: rtw89: fix disabling concurrent mode TX hang issue wifi: rtw89: fix HW scan timeout due to TSF sync issue wifi: rtw89: add wait/completion for abort scan wifi: rtw89: fix null pointer access when abort scan wifi: rtw89: disable RTS when broadcast/multicast wifi: rtw89: Set default CQM config if not present wifi: rtw89: refine hardware scan C2H events wifi: rtw89: refine add_chan H2C command to encode_bits wifi: rtw89: 8922a: add BTG functions to assist BT coexistence to control TX/RX wifi: rtw89: 8922a: add TX power related ops wifi: rtw89: 8922a: add register definitions of H2C, C2H, page, RRSR and EDCCA wifi: rtw89: 8922a: add chip_ops related to BB init wifi: rtw89: 8922a: add chip_ops::{enable,disable}_bb_rf wifi: rtw89: add mlo_dbcc_mode for WiFi 7 chips wifi: rtlwifi: Speed up firmware loading for USB wifi: rtl8xxxu: add missing number of sec cam entries for all variants wifi: brcmfmac: allow per-vendor event handling wifi: brcmfmac: avoid invalid list operation when vendor attach fails wifi: brcmfmac: Demote vendor-specific attach/detach messages to info ... ==================== Link: https://lore.kernel.org/r/20240125104030.B6CA6C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-19wifi: brcmfmac: allow per-vendor event handlingArend van Spriel10-63/+244
The firmware interface also defines events generated by firmware on the device. As the get/set primitives the events are likely to diverge between the vendors so this commit adds support for per-vendor handling. The number of events may differ so we let the vendor-specific code allocate the struct brcmf_fweh_info which contains array of event handlers. The existing event enumeration will be used by the higher layers and thus are common definitions. The vendor-specific code can provide a mapping table for converting the common definition to the vendor-specific firmware event definition and vice-versa. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240106103835.269149-4-arend.vanspriel@broadcom.com
2024-01-19wifi: brcmfmac: avoid invalid list operation when vendor attach failsArend van Spriel1-3/+4
When the brcmf_fwvid_attach() fails the driver instance is not added to the vendor list. Hence we should not try to delete it from that list when the brcmf_fwvid_detach() function is called in cleanup path. Cc: stable@vger.kernel.org # 6.2.x Fixes: d6a5c562214f ("wifi: brcmfmac: add support for vendor-specific firmware api") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240106103835.269149-3-arend.vanspriel@broadcom.com
2024-01-19wifi: brcmfmac: Demote vendor-specific attach/detach messages to infoHector Martin5-68/+6
People are getting spooked by brcmfmac errors on their boot console. There's no reason for these messages to be errors. Cc: stable@vger.kernel.org # 6.2.x Fixes: d6a5c562214f ("wifi: brcmfmac: add support for vendor-specific firmware api") Signed-off-by: Hector Martin <marcan@marcan.st> [arend.vanspriel@broadcom.com: remove attach/detach vendor callbacks] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240106103835.269149-2-arend.vanspriel@broadcom.com
2024-01-19wifi: brcmfmac: cfg80211: Use WSEC to set SAE passwordHector Martin7-35/+76
Using the WSEC command instead of sae_password seems to be the supported mechanism on newer firmware, and also how the brcmdhd driver does it. The existing firmware mechanism intended for (some) Cypress chips has been separated from the new firmware mechanism using the multi-vendor framework. Depending on the device it will select the appropriate firmware mechanism. This makes WPA3 work with iwd, or with wpa_supplicant pending a support patchset [2]. [1] https://rachelbythebay.com/w/2023/11/06/wpa3/ [2] http://lists.infradead.org/pipermail/hostap/2023-July/041653.html Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Neal Gompa <neal@gompa.dev> [arend.vanspriel@broadcom.com: use multi-vendor framework] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103095704.135651-5-arend.vanspriel@broadcom.com
2024-01-19wifi: brcmfmac: move feature overrides before feature_disableArend van Spriel1-3/+3
The feature_disable option in brcmf_feat_attach() is a debugging or workaround option to disable features that cause driver issues. Hence they should be done as last step after all feature detection mechanisms have been completed. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103095704.135651-4-arend.vanspriel@broadcom.com
Powered by cgit, Gruvboxed by Blaster4385.