| Age | Commit message (Expand) | Author | Files | Lines |
|---|
| 2018-06-05 | net: phy: broadcom: Enable 125 MHz clock on LED4 pin for BCM54612E by default. | Kun Yi | 1 | -2/+14 |
| 2018-05-04 | net: phy: broadcom: add support for BCM89610 PHY | Bhadram Varka | 1 | -0/+10 |
| 2017-12-15 | net: phy: broadcom: Add entry for 5395 switch PHYs | Florian Fainelli | 1 | -0/+42 |
| 2017-12-04 | net: phy: broadcom: re-add mistakenly removed config settings | Heiner Kallweit | 1 | -0/+3 |
| 2017-12-01 | net: phy: remove generic settings for callbacks config_aneg and read_status f... | Heiner Kallweit | 1 | -30/+0 |
| 2017-10-12 | net: phy: broadcom: support new device flag for setting master mode | Rafał Miłecki | 1 | -0/+6 |
| 2017-05-16 | net: phy: Remove residual magic from PHY drivers | Andrew Lunn | 1 | -15/+15 |
| 2017-04-30 | net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay | Abhishek Shah | 1 | -36/+33 |
| 2017-02-01 | net: phy: broadcom: rehook BCM54612E specific init | Rafał Miłecki | 1 | -34/+33 |
| 2017-01-27 | net: phy: broadcom: add support for BCM54210E | Rafał Miłecki | 1 | -1/+33 |
| 2017-01-25 | net: phy: broadcom: drop duplicated define for RGMII SKEW delay | Rafał Miłecki | 1 | -1/+1 |
| 2017-01-25 | net: phy: broadcom: use auxctl reading helper in BCM54612E code | Rafał Miłecki | 1 | -4/+2 |
| 2016-12-10 | net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause | Timur Tabi | 1 | -28/+14 |
| 2016-11-24 | net: phy: broadcom: Move bcm54xx_auxctl_{read, write} to common library | Florian Fainelli | 1 | -15/+0 |
| 2016-11-07 | net: phy: broadcom: Add BCM54810 PHY entry | Jon Mason | 1 | -1/+57 |
| 2016-11-07 | net: phy: broadcom: add bcm54xx_auxctl_read | Jon Mason | 1 | -0/+10 |
| 2016-10-26 | net: phy: broadcom: Add support for BCM54612E | Xo Wang | 1 | -0/+48 |
| 2016-01-07 | phy: Centralize setting driver module owner | Andrew Lunn | 1 | -12/+0 |
| 2015-11-23 | broadcom: fix PHY_ID_BCM5481 entry in the id table | Aaro Koskinen | 1 | -1/+1 |
| 2015-10-08 | net: phy: Add Broadcom phy library for common interfaces | Arun Parameswaran | 1 | -105/+44 |
| 2015-04-08 | net: phy: broadcom: Add BCM54616S phy entry | Alessio Igor Bogani | 1 | -0/+14 |
| 2014-11-12 | net: phy: replace phy_drivers_register calls | Johan Hovold | 1 | -14/+1 |
| 2014-08-23 | net: phy: broadcom: move shadow 0x1C register accessors to brcmphy.h | Florian Fainelli | 1 | -18/+0 |
| 2014-08-23 | net: phy: broadcom: extract all registers to brcmphy.h | Florian Fainelli | 1 | -104/+0 |
| 2014-02-14 | net: phy: broadcom: extract register definitions | Florian Fainelli | 1 | -52/+0 |
| 2012-07-09 | phylib: Support registering a bunch of drivers | Christian Hohnstaedt | 1 | -102/+17 |
| 2012-02-13 | drivers/net: Remove boolean comparisons to true/false | Joe Perches | 1 | -4/+2 |
| 2011-09-27 | treewide: Correct spelling of successfully in comments | Joe Perches | 1 | -1/+1 |
| 2010-10-05 | net/phy: fix many "defined but unused" warnings | Uwe Kleine-König | 1 | -1/+1 |
| 2010-06-24 | broadcom: Add 5241 support | Dmitry Baryshkov | 1 | -0/+22 |
| 2010-06-24 | broadcom: move all PHY_ID's to header | Dmitry Baryshkov | 1 | -12/+12 |
| 2010-04-02 | phylib: Add module table to all existing phy drivers | David Woodhouse | 1 | -0/+16 |
| 2010-02-17 | tg3: Push phylib definitions to phylib | Matt Carlson | 1 | -4/+1 |
| 2010-01-03 | broadcom: Fix &&/|| confusion in bcm54xx_adjust_rxrefclk() | roel kluin | 1 | -2/+2 |
| 2009-12-18 | broadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk() | Roel Kluin | 1 | -1/+2 |
| 2009-11-02 | tg3 / broadcom: Optionally disable TXC if no link | Matt Carlson | 1 | -0/+5 |
| 2009-11-02 | tg3 / broadcom: Add APD support for GPHYs | Matt Carlson | 1 | -9/+42 |
| 2009-11-02 | tg3 / broadcom: Add code to disable rxc refclk | Matt Carlson | 1 | -0/+43 |
| 2009-11-02 | tg3 / broadcom: Refine AC131 APD support | Matt Carlson | 1 | -3/+5 |
| 2009-11-02 | tg3 / broadcom: Add PHY_BRCM_CLEAR_RGMII_MODE flag | Matt Carlson | 1 | -0/+6 |
| 2009-11-02 | broadcom: Consolidate dev_flags definitions | Matt Carlson | 1 | -10/+1 |
| 2009-11-02 | broadcom: Fix slow link problem | Matt Carlson | 1 | -8/+14 |
| 2009-11-02 | broadcom: Isolate phy dsp accesses | Matt Carlson | 1 | -48/+42 |
| 2009-08-26 | broadcom: Make the 57780 IEEE compliant | Matt Carlson | 1 | -2/+35 |
| 2009-08-26 | broadcom: Add AC131 phy support | Matt Carlson | 1 | -0/+158 |
| 2009-08-26 | broadcom: Add BCM50610M support | Matt Carlson | 1 | -8/+30 |
| 2008-11-21 | broadcom: Add 57780 support | Matt Carlson | 1 | -0/+21 |
| 2008-11-03 | broadcom: Add support for BCM50610 | Matt Carlson | 1 | -1/+118 |
| 2008-11-03 | broadcom: Refine expansion register access routine | Matt Carlson | 1 | -26/+34 |
| 2008-11-03 | broadcom: Add flow control support | Matt Carlson | 1 | -6/+12 |