| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"struct vcap_operations" are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct vcap_control" also needs to be adjusted to this
new const qualifier.
As an example, on a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15176 1094 16 16286 3f9e drivers/net/ethernet/microchip/lan966x/lan966x_vcap_impl.o
After:
=====
text data bss dec hex filename
15268 998 16 16282 3f9a drivers/net/ethernet/microchip/lan966x/lan966x_vcap_impl.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/d8e76094d2e98ebb5bfc8205799b3a9db0b46220.1718524644.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With this its is now possible for clients (like TC) to change the port
keyset configuration in the Sparx5 VCAPs.
This is typically done per traffic class which is guided with the L3
protocol information.
Before the change the current keyset configuration is collected in a list
that is handed back to the client.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides these 3 actions for rule in the ES0 VCAP:
- action vlan pop
- action vlan modify id X priority Y
- action vlan push id X priority Y protocol Z
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This enables the TC command to use the Sparx5 ES0 VCAP, and handling of
rule links between IS0 and ES0.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds the ES0 VCAP port keyset configuration for Sparx5.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This enables the TC command to use the Sparx5 ES2 VCAP, and provides a new
ES2 ethertype table and handling of rule links between IS0 and ES2.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows the check of the goto action to be specific to the ingress and
egress VCAP instances.
The debugfs support is also updated to show this information.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the ES2 VCAP port keyset configuration for Sparx5 and also
updates the debugFS support to show the keyset configuration and the egress
port mask.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows the IS0 VCAP to have its own list of supported ethernet
protocol types matching what is supported by the VCAPs port lookup
classification.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds the IS0 VCAP port keyset configuration for Sparx5 and also
updates the debugFS support to show the keyset configuration.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This changes the VCAP lookups state to always be enabled so that it is
possible to add "internal" VCAP rules that must be available even though
the user has not yet enabled the VCAP chains via a TC matchall filter.
The API callback to enable and disable VCAP lookups is therefore removed.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows support of TC protocol all for the Sparx5 IS2 VCAP.
This is done by creating multiple rules that covers the rule size and
traffic types in the IS2.
Each rule size (e.g X16 and X6) may have multiple keysets and if there are
more than one the type field in the VCAP rule will be wildcarded to support
these keysets.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This ensures that the VCAP cache and the lists maintained in the VCAP
instance is protected when accessed by different clients.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a debugFS root folder for Sparx5 and add a vcap folder underneath with
the VCAP instances and the ports
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds API methods to set and get a rule counter.
A VCAP instance may contain the counter as part of the VCAP cache area, and
this counter may be one or more bits in width. This type of counter
automatically increments it value when the rule is hit.
Other VCAP instances have a dedicated counter area outside of the VCAP and
in this case the rule must contain the counter id to be able to locate the
counter value. In this case there must also be a rule action that updates
the counter using the rule id when the rule is hit.
The Sparx5 IS2 VCAP uses a dedicated counter area.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds a sorting criteria to rule insertion and deletion.
The criteria is (in the listed order):
- Rule size (largest size first)
- User (based on an enumerated user value)
- Priority (highest priority first, aka lowest value)
When a rule is deleted the other rules may need to be moved to fill the gap
to use the available VCAP address space in the best possible way.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This add support for Sparx5 for dissecting TC ARP flower filter keys and
sets up the Sparx5 IS2 VCAP to generate the ARP keyset for ARP frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a tc matchall rule with a goto action to the VCAP specific chain to
enable the VCAP lookups.
If the matchall rule is removed the VCAP lookups will be disabled
again using its cookie as lookup to find the VCAP instance.
To enable the Sparx5 IS2 VCAP on eth0 you would use this command:
tc filter add dev eth0 ingress prio 5 handle 5 matchall \
skip_sw action goto chain 8000000
as the first lookup in IS2 has chain id 8000000
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tries to match the keys in a rule with the keysets supported by the
VCAP instance, and generate a list of keysets.
This list is then validated against the list of keysets that is currently
selected for the lookups (per port) in the VCAP configuration.
The Sparx5 IS2 only has one actionset, so there is no actionset matching
performed for now.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This changes the port keyset configuration for Sparx5 IS2 so that
- IPv4 generates a IP4_TCP_UDP keyset for IPv4 TCP/UDP frames and a
IP4_OTHER keyset for other IPv4 frames (both UC and MC)
- IPv6 generates a IP_7TUPLE keyset (both UC and MC)
ARP and non-IP traffic continues to generate the MAC_ETYPE keyset
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides most of the rule handling needed to add a new rule to a VCAP.
To add a rule a client must follow these steps:
1) Allocate a new rule (provide an id or get one automatically assigned)
2) Add keys to the rule
3) Add actions to the rule
4) Optionally set a keyset on the rule
5) Optionally set an actionset on the rule
6) Validate the rule (this will add keyset and actionset if not specified
in the previous steps)
7) Add the rule (if the validation was successful)
8) Free the rule instance (a copy has been added to the VCAP)
The validation step will fail if there are no keysets with the requested
keys, or there are no actionsets with the requested actions.
The validation will also fail if the keyset is not configured for the port
for the requested protocol).
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides a default port keyset configuration for the Sparx5 IS2 VCAP
where all ports and all lookups in IS2 use the same keyset (MAC_ETYPE) for
all types of traffic.
This means that no matter what frame type is received on any front port it
will generate the MAC_ETYPE keyset in the IS VCAP and any rule in the IS2
VCAP that uses this keyset will be matched against the keys in the
MAC_ETYPE keyset.
The callback interface used by the VCAP API is populated with Sparx5
specific handler functions that takes care of the actual reading and
writing to data to the Sparx5 IS2 VCAP instance.
A few functions are also added to the VCAP API to support addition of rule
fields such as the ingress port mask and the lookup bit.
The IS2 VCAP in Sparx5 is really divided in two instances with lookup 0
and 1 in the first instance and lookup 2 and 3 in the second instance.
The lookup bit selects lookup 0 or 3 in the respective instance when it is
set.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds initial TC flower filter support to Sparx5 for the IS2 VCAP.
The support consists of the source and destination MAC addresses,
and the trap and pass actions.
This is how you can create a rule that test the functionality:
tc qdisc add dev eth0 clsact
tc filter add dev eth0 ingress chain 8000000 prio 10 handle 10 \
protocol all flower skip_sw \
dst_mac 0a:0b:0c:0d:0e:0f \
src_mac 2:0:0:0:0:1 \
action trap
The IS2 chains in Sparx5 are assigned like this:
- chain 8000000: IS2 Lookup 0
- chain 8100000: IS2 Lookup 1
- chain 8200000: IS2 Lookup 2
- chain 8300000: IS2 Lookup 3
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides the Sparx5 Ingress Stage 2 (IS2) model and adds it to the
VCAP control instance that will be provided to the VCAP API.
The Sparx5 IS2 C code model is generated from the Sparx5 RTL design model.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides the initial VCAP API framework and Sparx5 specific VCAP
implementation.
When the Sparx5 Switchdev driver is initialized it will also initialize its
VCAP module, and this hooks up the concrete Sparx5 VCAP model to the VCAP
API, so that the VCAP API knows what VCAP instances are available.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|